Flash player for mac does not work?

Similar Questions

• FLASH PLAYER 10.1 does not work on my 32-bit browser

  the latest version of FLASH PLAYER 10.1 would not work on my 32-bit FIREFOX browser.  So I installed flash player on a 32-bit VERSION of internet explore. It worked fine for a few days until that ADOBE asked me if I wanted to update my player.      NOW IT DOES NOT WORK!      NOW HE FACT OF SAME "GREEN FLASHING SCREEN WHITE" HER WORK ON MY FIREFOX BROWSER!    WHAT GIVES?

  Hi, it would probably be best to have your own thread, but to save you the trouble of typing whole, I'll see what I can do. I have not checked for a few days to see if Mozilla Firefox updated the browser since 6/26. It is 3.6.6. The 3.6.4 was created by design by Firefox Flash Player crash on purpose in order to not crash the browser Firefox together. Then a lot of complaints from users of Farmville and other brought up-to-date 3.6.6 so to extend the timeout and give more time for them to load before crashing.

  Now the 10.1 has the hardware acceleration feature that is enabled by default. Many users find that turning it off has helped. In addition, it is recommended to update the graphics and the latest video drivers. These three things helped in the use of the 10.1, because there is no other issue.

  To disable hardware acceleration, just go on youtube (videos load faster it I'm told), right-click on the video as soon as it starts and you should see a display setting that turns off.

  Hope this helps.--

  Thank you

  eidnolb

• Flash Player 10.3 does not work

  Hello

  I just got an iMac "nine" with OS 10.6.7 and installed Flash Player 10.3 which does not work properly. I can see videos from Youtube and I can still watch the video on the page with the CS 5.5. on the. But for example I can't watch any video from the Adobe TV page. Any ideas what is going wrong?

  concerning

  Brigitte

  PS: Yes, I restarted my mac already after the installation of Flash Player.

  Hi brimi, click-to-flash may be the problem. This info comes from a very nice user who has had this problem and here's what he found. I'll make sure that you have click-to-flash completely uninstalled first.

  If you have modules for Safari blocking Flash or turn off Flash on websites you visit then this is probably the problem. It's not always obvious as the 'Flash' Mat grey appear normally when the Flash is prevented from automatic loading is unable to draw on the screen.

  I used the module 'Click-to-Flash' Safari, but it has been disabled; nothing less he still prevented flash Adobe TV loading but other sites have worked perfectly.

  If you want to continue using the click-to-Flash, I advise to use the version of Safari Extension which can be installed from the official 'Gallery of Extensions Safari"Apple Open Safari and click on the Safari menu, it is the second element of the name above.

  Œuvres TV Adobe very well using the Safari Extension installed, so you can have the best of both worlds. When the Adobe TV site loads Flash video does not automatically load, you need to click the gray box that is engraved with the word 'Flash' to start loading the video.

  I hope this clears to confound those I've been watching television content Adobe.

  I would like to know if it works for you.

  Thank you

  eidnolb

• Someone help me please!, IE8 and Flashplayer. I loaded the version beta of Flashplayer, they said, would be to make it work, but I keep getting invited to load Flash Player. It does not work. Can I go back to IE7 and load the regular Flashplayer and remov

  I am running Vista Home premium, IE8, the latest version and after what Adobe says since I have problems with Flash Player. According to them, is not compatible with IE8, so they came out with this beta. It does not work! I am always prompted to load Flash Player for windows! Can I go back to IE7 and delete the others and the version beta and regular old flashplayer? Please help, that's all what I do perform, even Facebook is messed up because it requires flashplayer. But it seems that Windows does not recognize the flash drive I have loaded in beta. Does anyone know where I come from? I can also be reached at * address email is removed from the privacy *.

  Thank you very much!

  http://support.Microsoft.com/kb/957700

  How to uninstall or remove Internet Explorer 8?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try this:

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Uninstall Flash by using the uninstall program Flash Adobe link above.

  Flash is sometimes corrupted.

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  Reinstall Flash, after 1st unchecking / uncheck the toolbar Google download option there.

  All other questions: Contact Adobe.

  See you soon.

  Mick Murphy - Microsoft partner

• Flash Player 10.2 does not work with my Win 7

  I have problems with flash player and windows 7 (32 bit). Since the last update (version 10.2), simply stoped working here. I tried several types of approaches to correct, but so far nothing. I can not watch videos on internet, to always have a green screen and then crashing and is happening with opera, firefox, chrome... I tried to install an older version (10.1.85.3), but does not work as well, and what's weird, before the upgrade, it worked!

  I installed windows 7 again, but does not work with the new version again. I did a test: use the 9.0.283.0 version, almost everything works, except a few Web sites that require the latest version (NHL Centre ice, for example). I don't know what's going on and don't have any ideas how to fix, so if someone could help, I would be grateful.

  'Green screen' often indicates problems with hardware acceleration; have you tried to disable it (Flash Player settings)?

• updated flash player and still does not work.

  Recently, my games on Facebook and Youtube stopped working and prompted me to update my flash player.

  He included the link to Adobe, like all the sites who need.

  So, I did. It says successful installation, but it does not work.   When I check to see if any version, I see the Red Cross.  Help, please.

  I use Windows XP Version 2002 Service Pack 3

  I.e. 8 32-bit.

  P.S. I use Firefox and Chrome, but I don't like the quality of how Flash Player works on them.

  Hi, I see the other thread that you comment that the Kill bit is your problem. Glad that worked for you :-)

  Reference thread: http://forums.adobe.com/thread/829621?tstart=0

  If you, please mark this thread as answered even tho your solution was not from here.

  Thank you

  eidnolb

• Volume F4 - F5 key on the keyboard for mac does not work on the microsoft side

  Volume F4 - F5 on the keyboard for mac key does not work... on the side of microsoft may not decrease or increase volume

  Hello

  ·         What do you mean by Microsoft Side?

  ·         Have you tried to update the latest audio drivers for the computer?

  ·         Were there any changes made on the computer before the show?

  Also I suggest you to contact the Apple support:

  http://www.Apple.com/support/Mac/

  See also: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

• completed the download of Adobe Flash Player 11, but does not work

  I have downloadred flashplayer 11 to the point where it says that it is comprehensive, but it does not work because it wants me to download it again when I want to use it.  While downloading, he asks me to sutdown internet explore what I do and he tells them that it is complete.  What do I do?

  Assuming you're using Internet Explorer 9, try the procedure described in this FAQ:

  Allowing Flash Player in Internet Explorer 9

• I've upgraded to Flash Player and it does not work it tells me to reloadhave to keep redowloading

  It s telling me load flash player over and over again and it still does not work

  To help us to understand your problem quickly, please follow these guidelines when posting:

  • Specify your operating system (including 32-bit or 64-bit edition)
  • Specify your browser and its version (including 32-bit or 64-bit edition)
  • Specify your version of Flash Player
  • Give us a brief explanation of the problem, please include any information that you consider to be important

• The incognito in 39 of Firefox for Mac does not work

  When I connect to Gmail with Firefox for the Mac sha256 39 - 7da80d615390fc65f0f5540ac2fbaa6e5d8e8e0b and close the tab, then immediately open gmail again it automatically logs me on my same Gmail account if I use private browsing.
  Private browsing is not suppose t maintain all information so how is able to access my Gmail account without my entered password?

  I don't know how the private browsing mode works on Mac because you can close all the tabs, but still operating application Firefox (the menu bar is here), so it is likely that you have not finished the session mode PB.
  You will need to close and restart Firefox to get rid of cookies that make the site remember you.
  Closing tabs does not seem to be enough.

• Windows Live Mesh for Mac does not work with Mac OS 10.7 Lion

  Maybe someone could help me with this.

  • I migrated to a disk hard again and update of Snow Leopard Lion this week
  • Live Mesh has stopped working so I downloaded the most recent distribution of MS: 15.4.5726.23, 20/07/2011 release date, which says it's for Mac, including the last OS 10.7 Lion as well.
  • It loads, wait, does nothing (the choice of unique to Quit or help menu, and then it ends after about 30 seconds, the LiveAgent not appearing.)
  • I made sure the application has access through the firewall Mac and use the stealth mode.  With stealth enabled, there are messages from the console: Live Agent is listening to 0.0.0.0:59142 proto = 6 AND Live Agent is listening to: ffff:0.0.0.0:59142 proto = 6 AND the first msg repeats.    I also disabled the firewall to test without effect if LiveAgent fails to load. Firewall of variants: with the firewall on, LiveAgent just sits with console messages above until the user clicks on the icon status agent and it then goes to the waiting interminable spinner; with the firewall off, it goes to spinner in less than 15 seconds spontaneously with the GSM, but two sets of their pop up.
  • I repeated a deinstall [app and files] / refresh-download/install process three times and got the same results.
  • In the Finder, and LaunchPad, the icon is displayed normally.
  • I reinstalled the previous version [15.4.5722.2] and the LiveAgent charges, but never decided and just hangs.
  • After doing this and made a fourth installation 15.4.5726.23, 20/07/2011, it now loads the agent but is still suspended as the previous version.
  • If after that, I have now the LiveAgent treat during initialization, but never finished.  It remains active for approximately 8 MB of RAM, but no cycles CPU are used
  • My sync folders are orphans of their source computer, although they always synchronize with my Win7 laptop.
  • I dug a little deeper trying to solve this problem.  I get the following error message if I dig in the 15.4.5726.23 app and run the executable manually:

  aarc01: ~ $ Applications/richard/Windows\ Live\ Mesh.app/Contents/MacOS/Windows\ Live\ mesh; "exit";

  Exception thrown:

  System.IO.FileLoadException: Error 0x1A88.  Debugging resource strings are not available. See http://go.microsoft.com/fwlink/?linkid=106663&Version=3.0.50908.0&File=mscorrc.dll&Key=0x1A88

  [IO. FileName_Name]

  Arguments: Microsoft.LiveFX.ResourceModel, Version = 15.4.0.0, Culture = neutral, PublicKeyToken = 7cec85d7bea7798e

  Debugging resource strings are not available. Often the key and arguments provide enough information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=3.0.50908.0&File=mscorlib.dll&Key=IO.FileName_Name

  at Microsoft.MeshOperatingEnvironment.Runtime.Client.MoeRuntime.Start)

  at Microsoft.MeshOperatingEnvironment.Runtime.Client.ILFilter.ExceptionFilter.TryFilterCatchFinally (FilterDelegate filterDelegate, CatchDelegate catchDelegate, TryDelegate tryDelegate, FinallyDelegate finallyDelegate)

  I've seen this behaviour before with v.15.4.5722.2, about 4-5 months ago, but I do not remember what was the solution that solved.

  Can anyone out there advise me?

  THX in advance,

  RC

  Hello RichardCampbellVancouver,

  There is a dedicated forum dealing with problems Windows LIve Mesh. They will be better able to answer your question in the forum.

  Please transfer your question in the Windows Live Mesh Forums on the link below.
  Click on the yellow - ask a Question.

  http://windowslivehelp.com/product.aspx?ProductID=24&version=15.3.2804.0607

  Sincerely,

  Marilyn

• Flash Player installs but does not work

  I've recently upgraded to Flash 11.6.602.171. I am running Windows 7 x 64 and IE 10 (32-bit edition). Installation said successefully Flash installed, but embedded Flash content does not appear on the web pages. All I see is a blank section where should appear the flash content. Still works fine before, it started just after an upgrade to the latest version. Shockwave Flash object is enabled in Internet Explorer. Go to Flash in my control panel shows that the latest version activex controls are installed. Here's what I've tried;

  • Through all installation and uninstall procedures set out on the Adobe web site. No differerence.
  • I uninstalled Flash and checked that it is uninstalled as described on the web page of Adobe Version 'find' according to the
  • Reinstall Flash and it says "Flash installed successfully."
  • Go to the page to find the Version and the Flash object is not displayed. When the page is loaded a gray area appears, then disappears, and no flash object shows. Do right click makes up the menu of the flash objects and I can access the Flash drive configuration manager, but can not display flash content.
  • I uninstalled and reinstalled 3 times and get the same results.
  • Videos YouTube work fine. Only embedded objects do not work.

  Another thing I noticed is that Silverlight video does not show as well. Move the mouse around section of the white screen where video Silverlight should be, the mouse pointer changes to the finger and I click, playback of video with audio but no video. I also noticed that aero live preview on my taskbar now shows white screens with icons instead of a real overview of the windows. I think this may be a video display problem, but have no idea as to how to proceed.

  Any help is greatly appreciated

  Issue is resolved for now. By reading another post, I came across this;

  http://forums.Adobe.com/message/5112973

  I posted my find there. The bottom line is by uninstalling Windows update kb2670838, all my problems disappeared. Feel like lately I spend hours and hours the weekend to try to resolve the problems as Microsoft Updates create the Wednesday and Thursday of the previous week. Thank you Microsoft!

  Mike

• Flash Player 10.1 does not work in Firefox, works in Internet Explorer

  I use firefox, but every time I go to watch a video, I get this error message: video currently unavailable.

  I tried to use IE and downloaded the flash player and I can watch the videos in Internet Explorer, however, I use FF.

  Can anyone help? I tried all the suggestions on this forum and reinstalled Flash player repeatedly. I have run windows

  Vista Basic on a 32-bit.

  Thank you for your time,

  Hi, did you mean you installed FF 3.6.3? The 3.6.4 had problems with FP10.1 and it's one of the reasons FF updated their browser to 3.6.6 but it has problems as well. If some users have been going back to FF vs 3.6.3 and it worked well.

  If you do not have these problems with Flash Player 10.0.45.2, then you can consider 10.1 uninstall and installation of the previous version. Either that or installation of Safari and see if that helps. I think just to install the browser Safari would be much less of a problem since you have all Flash files for her. You wouldn't need to worry about Flash Player.

  Since you do not have Java and can not need, however you don't have the Javascript Language. You want to make sure you have that?

  Let me know.

  Thank you

  eidnolb

• AutoUpdate for Office 2011 for MAC does not work

  2011 26 "IMAC

  OSX 10.7.5

  2.7 GHZ Intel Core I5

  4 GHz 1333 mhz DDR

  I just rebooted / cntrl R and ERASED the disc

  Reinstalled OSX and "software-update" all the software needed for Mac successfully

  BUT, after I installed my Office for Mac 2011 student / home edition successfully.

  entered my code produced and opened with success of Word and Excel documents

  then I tried 'auto-update' Office for MAC via their "help / check the drop-down list updates.

  Set TI to update several times...

  BUT, then got into a loop trying to install "Microsoft Autoupdate 2.3.6 critical 10/19/12.

  He said... Download the update very quickly (hard to read)

  then he said... .checking for updates again

  AND the same automatic update 2.3.6 appears as needing to be installed

  I keep hitting install it... and same repetitive steps keep occurring...

  LAST loaded version said 14.0.0

  ????

  Note: searched the Internet and some sites from microsoft... but none has seemed relevant for my version

  Thank you, Mark

  I found the solution on the answers.microsoft.com site:

  Just look for the thread titled

  "Microsoft for Mac 2011 auto update stuck in the cycle of the strange"

  Problem is that your Installer is coming from a DVD player that has the older version of the installer.

  Therefore, follow the instructions on the thread (there are several options available).

  I solved my problem by going to the Microsoft Web site and download Office 14.6.3

  directly from their site < -.

  Thanks to all of you who have read my thread.

  … Mark

• Microsoft messenger for mac does not work.

  My msn for mac said these things for centuries, I tried to fix it for ages. It is said: 'sign in to Microsoft Messenger failed because the service is not responding. The service is not available or you may not be connected to the internet. "I certainly know my internet works because I can access everything. There is a way supposed to solve this problem, which is where you click on the sign with a different account link, then click on clear history, but I would not have to do something like that, because I want to keep my story, is it possible for me to keep my story and always solve this problem?

  Please visit the following link.
  http://www.officeformac.com/ProductForums/MacMessenger/890

  This can guide you in the right direction...