Flash stands installation after the download. Black screen on the installer.

Similar Questions

• Cannot install flash player. After you download the Adobe FLash Player installer and running, a gray pop-up window opens but nothing does not appear in it. There is no progress bar or whatever it is.

  Cannot install flash player. After you download the Adobe FLash Player installer and running, a gray pop-up window opens but nothing does not appear in it. There is no progress bar or whatever it is, and even after keeping it running for a long time, there is no progress. Please help with this question.

  Hi Rlap,

  We are aware of this problem and are working on a fix.  In the meantime, please use the offline installation program, displayed at the bottom of the help page corresponding to your operating system and browser:

  • Installation problems | Flash Player | Windows
  • Installation problems | Flash Player | Mac

  Installers are at the bottom of the page, in the section "problems".

  --

  Maria

• Top of the Tower stopped working, no reboot. Stop after BIOS and black screen then

  Data;
  Computer HP Pavilion dv9000

  MS Vista operating system

  Process;

  When I start the computer, it stops after the session of the BIOS and just give me a black screen empty, with a marker in the upper left conner.

  As I have no recovery CD, I can't do anything (software installed when I bougth the PC without any CD included).

  I have a good software entering (and identification number is located on the computer), but I can't find anywhere to download on a recovery disc (CD)?

  Very frustrating!

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Adobe Flash Player not display videos on YouTube after some point - black screen only

  Hello. I have a problem with Flash Player on YouTube. It crashed it many, many times so I decided to open this thread to let you know on this subject, if you do not already know.

  Now, I have no report of accident or something it crashes after a while. Even if it does not crash report, I understand because YouTube videos do not work and I had only a black screen. When I tried to close (click on 'X' in the top right) Firefox, he refuses to close with a few clicks. I can only close with the combination of keys CTRL + ALT + DELETE and end the process. After I closed Firefox and open the new page, it works fine until I get the same situation.

  In addition, I have laptop with these specs:

  Intel Core i5 3210 m

  AMD Radeon 7670 m + Intel HD 4000 (with AMD Switchable Graphics called Enduro)

  8 GB Ram

  Windows 7 Ultimate 64 bit

  I don't know what problem is the cause, so I couldn't give you a lot of information. But if you need information, I'll try to help. Thanks in advance.

  PS: I'm sorry for the bad English.

  Thanks for your reply. I totally forgot the subject, sorry.

  I solved the problem, feature hardware acceleration just disabled in the Preferences menu and everything works fine now.

  http://helpx.Adobe.com/Flash-Player/KB/video-playback-issues.html

• Satellite A300 - after update BIOS black screen

  Hi all
  I just applied the update to the BIOS on my Satellite A300. After the update is successful, the system carries out a restart. Now when I try to start it I get no display, I can hear the proceedings to hear it, the CD player, the DVD, playback led flashes.

  The ASP Toshiba rang me (phone call), the motherboard must be replaced after a bios update, but it is very expensive for me :(
  Please can you tell me if they are a way to fix it without replacing the motherboard? The bios is an Insyde and according to the site Internet the bios bios [recovery technology | http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP does not know that.

  Please can you tell me how to start the recovery procedure it is possible (combination?),.
  Any help on fixing the laptop without replacing the motherboard will be much appreciated.

  Hello!

  I think that the ASP is just and in the worst cases, the motherboard should be replaced.

  You can try to remove the battery and the AC adapter. Wait one hour and then connect the AC adapter and the battery and try again.

  If it doesn't work you should go to an ASP. Perhaps a BIOS reset can solve the problem, but it can be done from an ASP.

  Good bye

• Download black screen during installation of Windows 7 from the disk.

  Original title: loading Windows 7 with windows 8 is already installed

  Dell computer brand new.  (Terrible dealer. They charge $ for help on something other than the material.)  The new computer comes with windows 8 is installed.

  Like any windows 8.  Ordinate of windows 7.  They sent the disc and no key.

  Dell will not help with installation unless you pay them $!  They say that it's a Microsoft product, and they are not obliged to help, even if it was purchased from them!  It's like buying a new washing machine or a car.  You need to contact the manufacture to get help with it?

  No, you communicate with the store, it was purchased from.  This applies to any new product I know. But not with Dell!

  Sorry for the rant.  I just found this totally outrageous situation.

  MY PROBLEM:

  Installing windows 7 from the drive, they sent.  Ten minutes into it the screen goes all black.  It is said that there is a file on the disk.  Also a button to continue.

  I stopped the installation and am at a loss as what to do...

  Thank you, Al

  Hello

  Have you checked to see if your model computer has Windows 7 drivers available from Dell for it?

  If not, it will not install properly or work properly.

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  ___________________________________

  Have you changed the order of startup and boot the Windows 7 disc, they sent you?

  You press F12 in a Dell to change the Boot order

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19500812.aspx

  Then do a clean install:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  ____________________________________

  Or ask Dell to replace the disc if it is faulty.

  ____________________________________

  Or download the correct ISO file and make your own drive and use the product key that is on the sticker COST Dell sent you.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  And Neosmart has instructions on how to burn ISO disk images using imgburn:

  http://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

  By using the downloaded ISO file method can require the Activation of phone.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

   

  ________________________________________________

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  See you soon.

• Satellite A500 - 18 X - after windows sleep, black screen

  Hello

  I bought this laptop yesterday and I noticed this problem: when I SLEEP the laptop, and then it continues when I press the power button to turn on the laptop, the laptop turns on, but the screen lights - black... Thus, force close, holding down the power button...
  What could be the problem?

  Kind regards.

  Hello

  Have you tried to update the display driver?
  Isn't it? Well, I think you should do this because I read in the forum that similar issues would be resolved by the update of the display driver.

  It would also be desirable to have the latest version of the BIOS.
  Check the version of the BIOS and if the most recent BIOS is available then to update this!

  See you soon

• Adobe After Effects CS6 black screen

  Hello

  I was watching a tutorial on youtube how to do some audio spectra, I miss clicked and one of the boxes have disappeared, I couldn't find any button back, nothing would work, so I continued to try clicking different areas where I miss clicked, all Adobe After Effects has finally become completely black , restart the program is far from helping me, I have no idea what to do from here.

  I managed to go from this: http://prntscr.com/aognfd , to this real quick: http://prntscr.com/aognir . I have no idea what I did there, nothing works and there is no such a thing online that happened to others that I tried to search. I am desperate for help.

  Thank you

  GerilliaSan

  Reset your workspace. Window > workspace

• Consisting of the Director Flash tree fails after the passage by far and return to projector window

  When you use the flash in Director MX 2004 tree component, if I pass away to another application and back to the projector, the flash component does not correctly and incorrectly shows a square outline superimposed in the sprite. The number of times I go back before that happens varies - sometimes the first time, and sometimes up to 6 or 7 times before that occur. The tree no longer works after this point, but the rest of the film's Director works very well.
  
  More information about the behavior of the tree, after which the bug occurs:
  
  (1) the outline of the box seems to be the border diminishes, but the tree itself is not resized.
  (2) all collapsible icons continue to work.
  (3) the words of the node of the tree is no longer point out when you click on it, until the node that precedes extends first.
  
  I tried not using built-in and coating components just a Flash active swf created from a FLA with a component of the tree in it, but it does exactly the same thing.
  
  I use Director 10.1.1 on WIndows XP SP2, by loading a .dcr file in quickstart projector using a separate Xtras folder.
  
  Everyone heard talk about this before, or have any ideas?

  BTW, this happened also with the List component and v10.1.0 as well.

  If you are interested in more information on this bug, Bowl on more of http://www.experts-exchange.com/Web_Development/Software/Macromedia_Director_Video_Softwa/ Q_23580077.html #a22076034

  As for a solution...
  It turns out that the factor that makes this place is if backgroundAnimation is disabled.
  Turn it on, and the problem goes away.

  I did it in the file projectorName.ini, with the line:

  [Settings]
  BackgroundAnimation = 1

  or, if you are creating a projector and not using an .ini file, by checking the background Animation in the editing dialog box.

• BlackBerry Smartphones flashing red light after the charge for the night

  I have a Rogers Bold 9900 that don't would not start this morning after last night.  Instead, I have a red led slow blink.  I tried to connect it to my Blackberry Desktop Software, but he would not see it (kept saying that he could not connect).  I understand it is a common problem with the 9900 and the telephone exchange is the only solution.  Generally I go back to Rogers and try to exchange the phone but I bought the phone outright and can not find the reception of anywhere.  Since this model is less than one year (so my phone can not guarantee being is another way to exchange it without my original receipt?)  I go back to BB Android and actually well liked my "BOLD" (especially in tandem with my Playbook), but now I find myself on an old Android phone because my "BOLD" is dead.

  Rogers's account of the purchase and you're on their network as well.

  You'll be fine.

• Layout error for Sony Picture Package even after the installation of Adobe Flash Player.

  When trying to open Sony Picture Package-message says need to install Macromedia Flash Player.  After you download Adobe Flash Player - always get the same message.

  That you ask for help from Sony at http://www.sony.com/index.php or Adobe http://kb2.adobe.com/cps/414/tn_4149.html and http://www.adobe.com/support/flashplayer/

• shows black screen

  When I'm browsing mozila site after some time black screen shown. How can I solve this problem. Please help me.
  Piyush lead

  Check this box:

  • see if there are updates for your graphics card disk drivers

  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

  https://forums.Adobe.com/message/4468493#TemporaryWorkaround

  • turn off hardware acceleration in the Flash plugin

  https://forums.Adobe.com/thread/891337
  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• MacBook Pro 2015 (Middle Version) - black screen

  Hello

  I recently bought this product of Sri Lanka a new product and I have a very serious problem when you use the pc. the screen starts flashing and its comes to a black screen which I am unable to perform his work be only a month. to be honest, I like apple products and but after this im really disappointed. I look forward to working with these future products. After spending this much and if you don't get anything out of it?

  And the worst case, it's the closest place where we can communicate. not even a single email address in the message or communication that is not very professional everything.

  I gave the pc to the local store to fix it and they say that they are unable to replace, what they do is try to fix it by their self and will let me know I have no idea what to do after that.

  here after, if it does not, I won't be advising all my friend to buy apple because of this insecurity. IM really disappointed in you guys!

  I think your problem is that Apple has no official presence in Sri Lanka.  Here is a list of countries that Apple does business in directly or indirectly.

  https://support.Apple.com/en-us/HT201232

  You might consider to contact Apple and see if you can ship the Mac for them for repair.

  Ciao.

• ThinkPoint infected computer won't allow any mode of windows to start: safe mode, normal mode, etc. A black screen is all I get.

  I have two computers. Those infected with Windowx XP Home Edition. All of a sudden (yesterday October 18, 2010) the ThinkPoint popup appeared. On my own computer, I looked for solutions and has been able to stop the service through the Task Manager. Then downloaded MalwareBytes. He scanned and detected 5 elements. He then opened a text window indicating that the 1 point might be deleted and needed to restart the computer. So, I followed the instructions on the window of MalwareBytes. But after reboot, a black screen. If he walks again and a black screen. F8 works but after I chooseany mode (safe mode, previous configuration, etc.) a black screen again. I looked for solutions and all assume them safe mode or any different normal windows mode, it works. My problem is that no boot option (same normal Windows) seems to work. Any help is appreciated. Thank you

  Hi Choratio,

  See thisthread for more troubleshooting steps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Only get a black screen on startup of Windows

  I have the most recent 5K 27 "iMac with a Radeon R9 M380.

  I want to install Windows 10 with an ISO and the process seemed all fine, even managed to get to the point connect you with my Microsoft account.

  But then after that I got a black screen.  Off and then restarted back in the Windows partition.  I get the small circle of loading Windows but then after that another black screen.

  I was wondering anyone knows it?

  You can start Windows safe mode? You have probably installed a wrong driver GPU.