Flashing external hard drive red / blue and do not make any noise

Similar Questions

• I want to copy files from one external hard drive to another and can not?

  Hello

  I try to copy the photo files and video from one hard disk to another.

  The donor 2 TB drive is formatted NTFS and the receiver is 1 TB OSX extended.

  There are about 72 000 photos and 475 GB in size. The 56 video about 226 GB files copied with some lacks but then make drag and drop made the other files of 5 or 6.

  I tried to drag and drop, but some files have been copied not. After a lot of research through what was had been transferred I found about 5,000 had not copied I then did drag and drop with each of the 20 files or if some copied OK.

  The troublesome files kept suggesting that a file "already exists" and stops the process when I clicked ok.

  I want to delete the NTFS drive and reformat for OS X extended and then replace them on the 2 TB drive.

  What I am doing wrong? Need me a software to copy?

  Select the drive in the disk, then Edit/restore utility and select your 2 TB drive in restoration since. This will probably reformat the external hard drive, erase all data.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK

  I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.

  I have an external hard drive Eagle Consus AND-CS2PSU2-BK.  It worked fine on my desktop, which works on XP.  I plug it to my computer laptop and nothing.

  When I plugged it in the first place, he says that he needed to download the drivers.  I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.

  I look under the drives in my computer and he's not here.

  I went to start, right click computer, left you click on Manage and double-clique then under storage disk management.  All I see are C drive and recovery disc (D).  No other drives displayed.

  I exitted who and set up the Control Panel, double click on Device Manager.  He said in the other topic peripheral USB to ATA/ATAPI bridge.  I don't know whether or not it is my external hard drive.  It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28).  This operation requires an interactive window station.  To reinstall the drivers for this device, click on reinstall the driver. »

  He asks if I want to reinstall the drivers, so I clicked that.  He couldn't find them / install them.

  Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.

  Help, please.  The same thing happens when I try to plug a flash/USB.

  Try this:

  In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b

• new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

  There are now 4 computers in front of me.

  Two are laptops 17 inch hp (consumer)

  Two are workstations mobile hp 17 inch (company)

  On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

  On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  This problem has been resolved.

  Right-click all methods have not access external external hard drives and flash drives.

  Sharing, permissions, ownership, administrative changes, all method all failed.

  This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

  The problem has been resolved by:

  (1) determine that he was not a NTFS problem

  (2) using the msconfig to isolate a single service

  When the unique service has been disabled the files on any external drives have been available.

  The service of the problem was the HP Client Security.

  This HP Client Security in its default value is set to deny access.

  Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

  When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

  I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

• I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I don't understand. What makes you think the reader 'is not compatible' with Windows 7? Windows (or any other OS besides) sees no external hard drives as "compatible" or not...

  Now if you have a PROPRIETARY disk, then that is a different case. If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• I backed up on an external hard drive of PS4 and cannot open it on my iMac with OS 10.8.5. He says to reinstall, but the only version is on my external hard drive. How can I transfer it to my iMac?

  I backed up on an external hard drive of PS4 and cannot open it on my iMac with OS 10.8.5. He says to reinstall, but the only version is on my external hard drive. How can I transfer it to my iMac?

  Hi aliceag,

  You can please download Photoshop CS4 from the following link and install it

  Link: other downloads

  Kind regards

  Tanuj

• Bought the new computer windows 10, itunes has changed location of support for external hard drive. The music does not appear in itunes.

  BOUGHT NEW COMPUTER WINDOWS 10, CHANGED ITUNES MEDIA LOCATION FOR EXTERNAL HARD DRIVE. THE MUSIC DOES NOT APPEAR ON ITUNES.

  Changing the iTunes media folder location setting affects only where new additions to your library will be stored.  To use a disk external drive to store your library complete (and assuming that you have access to the original data of the library on an old computer) you must copy the iTunes folder, by default in C:\Users\username\Music, on the external drive - structure library and its records should be like this:

  

  The hold button SHIFT DOWN when you start iTunes and when you see this message:

  

  Click choose a library... then find and select the iTunes Library.itl in iTunes on your external drive folder.

  For more information, see user turingtest2 on make a library of portable split.  You must also acquire a 2nd external drive and allows create and maintain a backup your library.

• My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  Download and and publish a report of Etrecheck:

  http://etrecheck.com/

  Ciao.

• My slideshow said opening program there is not enough space on I: but I: is an external hard drive. Why is it not open c:

  At the opening of my slide show program he says there is not enough space on I: but I: is an external hard drive. Why is it not open c: I have used before with no problems. Is there a way to force it to open it on my computers built in the hard drive?

  Hello

  1. what Slideshow program do you use?

  2. you try to open a slide show file or the program itself?

  3. If you try to open the file, then where is it?

  4. have you made a recent software or hardware changes to the system?

  If you are trying to oepn the file, then you can try to copy the file to the desktop and check if it helps.

• Disk recognized as usb flash external hard drive

  I have an old Samsung SP0411N IDE internal hard drive, I am trying to use as an external hard drive with a SATA & IDE adapter USB & eSATA Conceptronic csatai23u. Windows XP with Service Pack 3 detects the etc. of Sata to usb etc, but instead to detect the hard drive, it detects a usb mass storage, which according to me, that means a usb flash key. The connection has worked before, but I don't know how to make it work again. The last time it worked Windows says that it has detected a "Samsung SP0411N disk drive". The device does not show in my PC.

  Hi EduardoGB,

  -Are the other devices is recognized without any problems?

  See the section "my hard drive connected to the CSATAi23U is not detected by my computer" from the link below:

  http://www.Conceptronic.NET/site/desktopdefault.aspx?TabIndex=2&tabid=410&PC=CSATAI23U

  Also try to download and install the software for the product from the link below:

  Downloads

  Additional reference on:

  CSATAI23U

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Best external hard drives with usb and 2 crush

  I plan to buy an iMac 27 "and looking external hard drives usb and lightning which can be chained. The cie has some on apple's site, but do not have good reviews. Technology g g download reviews good enough readers. All of the suggestions.

  Have you looked at OWC? I have several of their readers, but mine are not Thunderbolt - they are either FW or USB3 or both.

  http://eShop.MacSales.com/shop/external-storage?_ga=1.37930981.756347728.1456539 978

• How can I change the permission of my external hard drive from tours and write "without formatting?

  My Toshiba external hard disk format was automatically replaced Windows NTFS after I had plugged on a Windows PC. Therefore, the permissions of the drive changed to 'read only' to "read and write" after that I used on my Mac. It happened once before and I remember the engineer on duty in an apple authorized service center had solved the problem without format the external hard drive. This is not an option for me now as well, but all the solutions, I looked to say online that the formatting of the disc is the first step. Help, please!

  Install software such as Paragon NTFS on the Mac.

  (139384)

• Memory full. HPW to identify and remove duplicate files. great western digital external hard drive is that it is not working properly

  hsving obvous problem assostated with little or no space drive. slow operion of progtams "program does not" and 'unable to write' trusted sites.

  Sometimes when the hard disk becomes incredibly full, you can even copy files to an external hard drive. In such cases, simply pull the disk and put in a USB external hard drive case. Attach it to a working computer and copy the data in this way, either on a drive in the system of work or another external hard drive (it will be slower). Delete the data out of the full disc. MS - MVP - Elephant Boy computers - don't panic!