Flashing green and Red pixels

Hey, guys!

I'm new to the forum and I apologize in advance if there is another thread with the same problem. I wanted to just share some pictures and maybe get answers to my problems. As mentioned in the legend my macbook air that I bought last year has green and Red pixels flashing on the screen. It covers just a vertical strip of 3-4 cm on the left side. It does not affect the performance but it gets really annoying. Im guessing there is something faulty with the video card or the matrix of pixels.

Here are some photos: https://scontent-vie1-1.xx.fbcdn.net/v/t1.0-9/13237711_1269211393091692_22297742 29739562934_n.jpg? oh = aedf6434da04f4dbdb6... and https://scontent-vie1-1.xx.fbcdn.net/v/t1.0-9/13239870_1269211399758358_20321648 26971687538_n.jpg? oh = cac08d41fe32ec25fb1... .

Anyone know what seems to be the problem? In addition, the 1 year warranty covers these dysfunctions of the material? And how long would it take for the apple service center to fix it?

Thank you in advance!

See you soon,.
Vasil

It looks like a bad graphics card. Bring any Apple store, it must be covered under AppleCare.

Tags: Notebooks

Similar Questions

  • Screen flicker Alienware 18 (2013) (green and Red pixels)

    Hello guys,.

    yesterday, my Alienware 18 LCD screen started with a problem, the screen flashes with red and green pixels, on the screen, including the loading of Windows, BIOS, etc..

    I connected an external monitor and its fine in this regard. l had already changed the initialization of GPU (discrete and integrated) to FN + F5 without effects.

    On Alienware diagnostics tools, it says that my LCD is Ok, but it's not.

    With an external monitor, I can work very well, without problems.

    Can you help me?

    Hello good morning

    I have a question, if you use your laptoponly on the integrated video processor.

    do you still have the pixels flickering artifacts.

    because if I remove the video card from 680 m gtx and working only with the chip on board everything is fine.

    so the thing that remains is the mobo, I think.

    tomorrow, I buy a box of anti oxidation and I will he give a try.

    Thanks for the advice and reflection.

    Thank you

    Marcel

  • Qosmio F30: green and Red pixels on the screen and cannot load Windows

    Pleas help me, my laptop is Qosmio F30. All of a sudden when I turned on my laptop, the green pixels appeared on my screen and could not go to Windows.

    I look it as a problem with VGA, but it can show perfect windows color flag when it came to Windows.

    Please help me...

    > I that it was a problem with VGA, but it can display the perfect windows color flag when he entered for Windows
    I m interesting in your state.

    Are you able to connect in windows; Yes or no?

    I don't know if this problem could be related to dysfunction of the m graphic card or display.

    It would be advisable to connect the laptop to the external display to make sure if the same would appear on the second monitor.
    If so, then a problem of graphics card would be possible

    Anyway, in both cases the ASP must be contacted because the defective part must be replaced if it s a hardware problem

  • Green, green and red flashing lights

    Can someone tell me this that green, green and red flashing lights on an access point 3602 indicates?

    Thank you

    Chris

    AP attempts to discover a WLC (CAPWAP discovery in the process).

  • Air-cap2702i-a-k9 flashing blue and red, suggestions?

    any suggestions on the question

    Got a air-cap2702i-a-k9 flashing blue and Red

    When I access the console cable

    a: the ap

    command prompt

    Thanks in advance for all

    advice/suggestions

    Hello

    This message means that the AP is in Rommon mode, and he needs to start with the IOS to work properly. In rommon mode you can check variables initialization to next recharge and try reloading the AP. For example, the set command will tell you the next boot image, you must ensure that this underlines the IOS of AP 2700.

    AP: the value

    Boot=Flash:/C1140-k9w7-tar.124-21A.JY

    You can manually set all initialization variables as above, IOS ip address, gateway, and you can also push new IOS image after download of EAC, if it is not an image valid. See the link below to learn more:

    https://supportforums.Cisco.com/document/56156/access-point-ROMMON-RECOV...

    Concerning

    Delphine

    * Please note the useful messages *.

  • If make it my video it flashes yellow and Red logos added. My computer is Mac...

    If make it my video it flashes yellow and Red logos added. My computer is Mac...

    Thanks, Neil

    I upgraded my Mac OS El Capitan and now everything was normal again

  • Webcam on Qosmio F60 flashes blue and Red

    Hi guys, I have a Qosmio F60. The problem, I think that I am facing right now, it of the flashes between blue and Red webcam for awhile and goes back to blue. And it's kind of hot behind the webcam on the laptop cover.

    Is it supposed to become hot when I make video calls?

    And what could be causing the flashing of the led light for the webcam.

    Hello

    Don t know exactly what the blinking led could mean but I have a question;
    The webcam works properly? Can you use this as supposed?
    If Yes, then I wouldn't be worried

    Incidentally that cam should not get hot, I think the FL inverter that is placed behind the screen is hot, but it's ok.

  • Xbox 360 controller flashes green and does not

    I have Windows 7 64 bit and an AfterGlow AX.1 Wired controller. I installed the driver from Microsoft's official website and my controller flashes green (the X in the Middle not the controller of everything) and my device manager says "this device does not work properly (Code 10)".

    I went though many forums but can't find answers.
    Please help I want to play COD Black Ops with it and so far I did not get around.

    Unplug the USB thing ('PC Wireless Gaming Receiver') sync for me have my gamepad stop blinking.  BTW, I use the joystick 360 official wireless from Ms.

  • The time on my Ipod will not change when its coastline, Wifi disconnects randomly, screen goes green and red and restart full iPod.

    OK so this problem started about two days ago. I noticed that my time was off so I went to settings > General > Date and time. I changed the hour correctly but when I locked it and got out of her for a few minutes, it was always the same when I changed it. For example: this morning, back at the exact time that was at 10:41 20 minutes later, I changed my time and it was still stuck at 10:41 time will work properly if I am constantly on my IPod and do not block. I really need to use the alarm when I wake up every morning! I've tried everything to fix it, but nothing seems to work. Reset my IPod do not even help.

    This issue has also started two days ago. I noticed that the wifi on my IPod touch 5th generation cut off while an application is open, but when I close it then connects back. It is only on my IPod, but not my IPad. It's pretty boring. I also tried to reset my router but it always disconnects.

    The latest happened just yesterday. Again, I've tried my time is correctly set when all of a sudden half top of my screen turns red and turns green half lower. The screen then goes to black and my entire iPod restarts.

    Thank you very much for the help. :-)

    Try:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Reset all settings

    Go to settings > general > Reset and tap reset all settings.

    All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

    -Restore from backup. See:

    Restore your device from an iCloud or iTunes backup - Apple Support

    -Restore factory settings/new iOS device.

    If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

    Shop Apple Store - Genius Bar

  • Satellite L450 - white screen, Fan Spin, the Green and red lights

    Hello

    I got this Toshiba L450 for a few years now but suddenly will not display anything on the screen. The hard drive does not sound like its spinning, but the fans turn on and then off the coast from time to time. There is green a light orange, but nothing shows it. I tired it on a monitor vga, and nothing shows on the screen. I tried to take the battery and nothing. I opened to check the connections are correct and that they are. I suspect the motherboard that went on the laptop but I was wondering if it was possible to do something else?

    I also took the RAM modules one by one and still nothing. I also used another battery and still nothing. As the dust has been removed fans as there was a lot of dust. The warranty expired a long time ago.

    All the tips, but be very much appreciated.

    Kind regards

    Hello

    To be honest, I don't think you can do something other than control of the RAM and the laptop for external monitor connection.
    RAM failure can cause issues as described in your ad, but it seems that you have already checked the modules of RAM and obviously, this isn't the reason for the question.

    So I think it may be the CPU or motherboard failure
    Motherboards are laptop parts more expensive, and if the laptop is not covered by the warranty, I wouldn't try fix this problem in this case, its value to buy a new laptop of course, that would be the only problem of CPU then maybe you should get in contact with a technician laptop that could test the hardware to get over details on the issue.

  • Artifacts (green and black flashing pixels) during video playback X 200

    Hello

    I recently bought a Toshiba X 200-191.
    After a while, I noticed green and black points while playing video, view photos and sometimes the vista aero interface. When I use the vista Stephen 3d window flipping until the problem goes away for a while... but finally returns.

    I did some research and found with the Analyzer performance Nvidia on the GPU and memory frequency is changing a lot (even in performance mode!) since normal values of @ 625 Mhz GPU and memory @ 702 MHz at 168 Mhz and 100 MHz respectively. Pixel problems occur when the MHz are in lower values.

    I use the drivers of laptopvideo2go 167.45
    (it is a pity that Toshiba is not released new drivers for awhile :(

    In any case... is a driver related issue or is this some hardware failure such as faulty memory, gpu or even supply?

    Hello

    To be honest, I'm afraid, that there may be a hardware problem. To be sure about I recommend you to use supplied recovery media and install OS again to have the factory settings. Test it with the original recovery image. Computer, the problem persists we hardware problem. If not, probably because of the failure to take in charge of driver.

    Please inform us of the results.

  • My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

    My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

    The next time you see the flashing light amber...

    Open Finder > Applications > utilities > AirPort Utility

    Click on the image of the AirPort Express

    If you see a button update, click on update the firmware on the airport

    Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

  • Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing the batteries?

    Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing batteries (and not connect to the computer; battery tested good tester)?

    Simply indicates that the devices are on.

    Barry

  • indicators red green and yellow are grey, I have accidentally uninstalled something in the "login items", but don't know what or how to replace. Thank you!

    indicators red green and yellow are grey, I have accidentally uninstalled something in the "login items", but don't know what or how to replace. Thank you!

    You have probably changed the OS X. go theme color in Preferences-> general systemand pass ' appearance: " "Blue ".

  • I have a Qosmio G30-204 and the darks went fuzy red pixels

    It started today and appears whenever the screen goes black and you can also see the normal red pixels of display, everyone has found this before.

    Hello

    You mean you can see the red dots on the screen while it s black?
    See you on the external monitor also?

    If not then I think it might be a screen issue may be dead pixel or something like that
    What do you think?

Maybe you are looking for