Flatten to a string to send arbitrary objects by messages from the user interface?

Similar Questions

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• Why can I send someone a text Message from my iPhone, but the iPad

  Can send a text message from my i5s, but cannot send the same person a message from my iPad. No, I want to send text uses android. In the past, I have sent this person a message from the iPad but won't work now.  What is happening with this?

  The devices must be connected on the same Apple ID, Bluetooth must be on, and then you can activate Message Forwarding text on the iPhone. It's in settings > Messages and then you will follow the steps to select the iPad. Once you do this, you will be able to send an SMS from iPad.

• I have an Iphone 6 and can't send or receive text messages to Iphone users not.  I can send the Imessages blue very well, but it is impossible to send green messages any idea how to solve this

  I have an Iphone 6 and can't send or receive text messages to Iphone users not.  I can send the Imessages blue very well, but it is impossible to send green messages any idea how to solve this

  SMS or text messages, are a specific function of the carrier. You must have an addition of text on your cell phone plan. If you can not send SMS, you must contact your operator to solve the problems.

• Cannot send e-mail in Outlook Express. Message "could not open the message from the Outbox folder. 0x800420C8 error number.

  Cannot send e-mail in Outlook Express. Message "could not open the message from the Outbox folder. Account email Sympatico Server SMTPHM.sympatico.ca Protocol SMTP Port 25 secure (SSL) Yes, error number0x800420C8

  original title: 0x800420C8 error NUMBER

  Never seen a port 25, who wanted to use SSL, but by checking, Sympatico's apparently.

  1. This account has already worked? Is it simply to start?
  2. What is the exact verbatim error message? Otherwise, copy & paste it into a response.
  3. Have you tried to send a message and the message stuck in the Outbox?

• flatten to a string for sending via TCP/IP contains CRLF characters

  Hello

  I use a function 'flatten in string' to send data via TCP/IP.

  To minimize delays, I use CRLF mode so that the receive function returns as soon as it receives a sequence CRLF (stop character).
  I noticed that every now and then that part of the data is transmitted as the flattened string itself sometimes (but rarely) contains CRLF characters.
  I was wondering if this is a correct behavior, or if I'm missing something. I expected to flatten to string in order to get channels pure ASCII without special characters.

  Now I must first parse the string replace the CRLF characters of some known series of characters and do the opposite to the front desk and hope that that particular sequence never occurs.

  Any comment is appreciated,

  Manu

  mkdieric wrote:

  I expected to flatten to string in order to get channels pure ASCII without special characters.

  I don't know why you would think this. A CR or LF is no more extraordinary than any character. In addition, the string you out is not "ASCII" and has never been--check the documentation. The output is entirely dependent on the entry, and it is perfectly possible to get a (hex 13) CR followed by a LF (10 hex) if the entry would produce flattened data which means that.

  A better method, in my opinion, is to precede that you send with the number of bytes to wait. Then beside reception read you a fixed number of bytes for the numerical value that indicates the number of bytes comes, and read you this amount. The examples provided with LabVIEW show you this method.

• access to objects in the user interface of Labview ResultList

  Hello!

  I would like to have access to Locals.ResultList TS [] objects in UI (LV) during test report generation.

  According to TS help in this point I can get the context of the sequence to the sequence of process template file that sends the UIMsg_ModelState_PostProcessingComplete message.

  But my sights are found in the context of the client's sequence file.

  Can I have access to the Locals.ResultList objects with file for the model intended use context?

  Is there a way to get the desired data?

  I have references to the file in the sequence and execution in this point and tried to use the Execution.RunTimeVariables property.

  But not able to get the data searched with any supposed this object search string.

  Thanks in advance for any ideas.

  Hi, Horbert

  Thank you much for the help!

  This time I found useful object to me: Execution.ResultObject.

  It refers directly to ResultList.

  However your variant is also very useful.

  Thank you once again and I cancel this topic.

• I can't send/receive pictures or messages from non-Apple device group

  I was never able to send photos to non-Apple devices. I can not send or receive group messages that include non-Apple devices. This has happened for years on every iPhone I've ever had. I tried all the suggestions on this site. Any ideas?

  Contact your operator. SMS/MMS is a function of the carrier, which is what you use when sending non - iOS devices. You must have a texting plan and one that includes the MMS to send pictures.

• Cannot send messages from the Outbox

  When I try to send I get a message "some problems occurred" I can receive messages O.K.     it the last time I was able to send messages it the duplicated.

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• To access the user interface objects in attachedObjects

  I have a NavigationPane and pages get pushed on this as long as the user clicks on the different buttons. The pages are defined as the attachedObjects and are pushed on the NavigationPane dynamically like this:

  NavigationPane{
      id: navigationPane
      property variant myPageVar
  
      Button{
          onClicked:
              if(myPageVar == null){
                  myPageVar = myPage.createObject();
              }
  
              navigationPane.push(myPageVar);
          }
      }
  
      attachedObjects: [
          ComponentDefinition {
              id: myPage
              source: "MyPage.qml"
          }
      }
  }
  

  Now, I would like to connect a signal from a TextField in MyPage element to a slot in my application, something like this:

  QObject::connect(m_pTextField,SIGNAL(textChanging(QString)),this,SLOT(onTextChanging(QString)));
  

  Anyone know how I can do this?  My biggest challenge is a reference to the object Page MyPage * c++, no matter what I can't seem to be able to acquire one.

  There are several options:

  (1) create a Q_INVOKABLE function in your C++ class by taking a QObject * parameter and export the instance to QML class. After you create the page to call this function and pass it the page dynamically. In this function, make the connection.

  (2) the same approach, but use a function without parameters. In the function callfindChild ("Edit") at the scene of the application to find the page. QML assign an object name to the Page after creation to work.

• How to change the user interface of the entity object indicators / Validation msg when running?

  Hello

  I use JDeveloper with version 11.1.1.6.3. Given my requirment details below.

  Suppose I have a (say 'EMPLOYEE_RATING') table in DB with the following structure.

  Columns:

  1 EmployeeId (Employee Id)

  2 RatingType (values can be in Stock or Bonus)

  3 RatingLevel (values can be 1, 2, and 3)

  Constraint:

  EmployeeId, RatingType and RatingLevel all together must be unique.

  Requirement:

  The customer's requirement is to have two screens of rating (one for Bonus another stock) and display different user interface boards and validations as follows.

  1 RatingType is a hidden field, are defined with the default (Bonus or Stock) based on the screen that the user opens.

  1. for the Stock screen, RatingLevel label should be "Stock note.

  2. for the Bonus screen, the label should be 'Bonus Rating'.

  3. for validation, the message must be 'Bonus note level must be unique' or 'Level of Stock of notes must be unique' ADB on the user screen opens.

  Implementation:

  I have a def EO (for example "RatingEO") and VO (for example ' RatingVO') def. Tips UI (Label) are given at the level of the OS. Also the unique constraint validation is made to EO with the message ' {0} and {1} must be unique, where {0} is source.hints.EmployeeId.label "and {1} is source.hints.RatingLevel.label.  I also did the shuttle two different instances of the VO (EmployeeRatingBonusVO and EmployeeRatingStockVO) in the request form (although BonusTaskFlow and StockTaskFlow are set to open with the new transaction, Intension of the two shuttle different named instances is to have the common code in VO. impl class but can run different business logic code by checking the name of the instance of VO)

  Question:

  Since I have two different pages, I can define two different labels in the jsff, but I can't change the commit message defined at the level of object entity based on open display. At the opening of the screen, depending on the type of screen, I should be able to change the label specified at the level of the entity object. (It should not affect the definition but only the instance). As this entity object cannot be distinguished (if it belongs to Bonus or Stock), I have problem on how to change the indicators of UI during execution.

  Any help on this would be appreciated! Thank you.

  Rami

  Post edited by: rami

  I tried your script.

  I created the secondary key with EmployId and rating level. I added validation of Unique key. In failure handling handling section of the validator, I gave the error message like: {0} must be unique. For token 0: I gave RatingType (here RatingType is the name of the attribute in OT).

  We give the default for RatingType as Stock Bonus in VO. kind RatingType get its value or Stock Bonus based on the original Version that we use.

  I hope this helps.

• Send notifications by e-mail from the IOM outside

  Hello
  I have a code which I'm out of IOM. The code does the following things:
  1. updates the expiration date of the user of the base of the end date indicated as input.
  2 send email notification after the end date of the user is updated.
  
  I can run point 1 with success-making key, user key Manager, update the end date of the user in the table of the usr, but I am facing issues when the notice is sent by e-mail to the user's Manager. If anyone has worked on this type of scenario, so please let me know.
  
  
  Thank you
  Kalpana.

  File send text as an attachment to the email.

• generate a random password and sending a userid by mail to the user

  Hello
  I have a field called username in the form of process, this user id are accessible only by the ANALYST GIA PROVISIONING for updating the user ID to provide some of the id of the user of the resource. I want to send the user ID of the process shape in a mail to the user of the target, in addition, I also want to include a password also field nd send a random password for the user. In short I want to get the values of the user id and password send an e-mail to the target user

  See task there is a notification tab where you attach several e-mail templates that can help you to send multiple messages to the same answer

• Question of Portuguese strings in the user interface

  Dear all,

  I'm showing my plugin UI protugues strings. Most of the characters is displayed correctly. But characters such as c, e, a, a, o do not display correctly. Some special characters are inserted before these characters and also the exactly the characters are not displayed. How can I fix this user interface problem? In the resource file, I have "kEuropeanMacToWinEncodingConverter" as the character encoding converter below:

  resources StringTable (kSDKDefStringsResourceID + index_ptBR)
  {
  k_ptBR, / / locale Id
  kEuropeanMacToWinEncodingConverter, / / character encoding converter
  {
  
  }
  }

  Thank you

  Your text is probably UTF8, use kResourceUTF8Encoded then. Check your settings in XCode for details, finally it reencoded just your source.

  If you want to stick with kEuropeanMacToWinEncodingConverter, make sure that the file is actually in Mac Roman - for example, open it in CodeWarrior.

  Dirk

• Remove the object or field from the tab order

  Hello

  I was wondering if there is a way to remove an object from the tab completely order.  Thus, when the user reaches the end of my set tab order they failed to hit 74 times tab to go beyond the computed text fields to return to the top of the order.

  Thank you

  The only solution I know is to use the setFocus method. The output of the last topic event you could add

  xfa.host.setFocus (form1.page1.subform1.firstField);

  drive focus to a field called "firstField.