Flex 2 app doesn't load after the RSL frame

Similar Questions

• App failed to load after the addition of test devices

  Hello

  I made a soft, did a dev ipa and installed on my iPad. Worked.

  But now I need to test it on another iPad as well.

  So I deleted the files mob Prov., added the new iPad and a new mob Prov. files.

  But now the app will install more.

  I made a new app ID > did not work

  I tried to do it again with only the original iPad app > even that no longer works.

  What can be the problem?

  Thank you!

  Restart your iPad and check out them. Also make sure the UDID match.

  Usually this error is due to certificates or UDID lack of files Mobile start-up.

  Recreate the certificates from scratch with the new app ID (do not use ' * ' in the App ID for example com.company. *). Make sure that you have unchecked iCloud in section ID App.

  Set up your devices (Add UDID and device name of the device in the devices section).

  Recreate App with new certificates.

  Remove old syncd APP in the iPad. Sync and install new .ipa

• LR doesn't stop after the last updated only with force quit

  LR doesn't stop after the last updated only with force quit

  Hi peterc48702056,

  For Windows, I'd say to set the priority of the process in Lightroom as a via the Task Manager

  For Mac, you suggested to copy the catalog to the location on the desktop or another location and then, check if the problem persists.

  Kind regards

  Claes

• Cannot load my APPS in Creative cloud after the installation of Sierra

  After the installation of Sierra on my MacBook Pro (retina, 15-inch, early 2013), I can them to load my APPS.

  I tried to restart the Mac several times, it doesn't help.

  

  Download error in the applications tab of Creative Cloud Desktop Application

  https://helpx.Adobe.com/creative-cloud/kb/download-error-apps-tab.html

• BlackBerry BB Z10 Z10 can not load after the 10.3.1 update

  Hello

  I'm having problem with my phone that can not load after that (updated with 10.3.1). battery When I charge the phone, the LED turns red, and then appears the Blackberry logo and finally the Red battery logo appears telling me that the phone has no power. He keeps repeated several times.

  How to start up the phone?

  Please help me. Thank you.

  I suggest you try the method of automatic loader, very clean and very energetic:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

  Beware that it is completely destructive... the device will be 'as new'... None given, no apps, no accounts, etc. Remember you first take a full backup, as well as make full manual documentation of applications, accounts, configurations, etc. Sometimes a restore reintroduced corruption even sought to eliminate, and manual reconfiguration is required.

  You can also use it to return to a BONE earlier if you want... you can install any level of the operating system for which you can find an auto-loader. (Hint... search the site of CB!)

  Good luck and let us know!

• HFM App will not open after the registration of newspapers to the managed server

  Hi all

  I have a HFM application on 11.1.2.3.500 version. We have ONLY native users and groups, when a user connects to the HFM application we can open the app intermittently. If we follow the sequence below

  1. open the application

  2. go in manage reviews

  3. add reviews

  4. change the members

  5. save it

  Now everything goes very well here. After that disconnect me, and then the connection, all I can see is loading of the Application screen. It remains like this for.

  It happens to all users except the admin account.

  We applied 11.1.2.3.502 patch in December.

  I suspect it is something to do with cache, but not sure what cache setting should look at dB, HFM?

  Newspapers

  UNKNOWN operation failed. Query execution error. Check the configuration and status of EPM system database.

  [2015 03-26 T 12: 16:47.092 + 02:00] [EPMCSS] [WARNING] [EPMCSS-10028] [oracle. EPMCSS. CSS] [tid: 25] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8:6] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.spi.impl.nvdb.NativeProvider] [SRC_METHOD: createCache] cache group failed for the native user directory. Query execution error. . Check the configuration of the EPM system registry.

  [2015 03-26 T 12: 16:47.077 + 02:00] [EPMCSS] [WARNING] [EPMCSS-10028] [oracle. EPMCSS. CSS] [tid: 25] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8:6] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.spi.impl.nvdb.NativeCacheBuilder] [SRC_METHOD: buildCache] cache group failed for the native user directory. Query execution error. Context of the same RID, already 0:1:4:4:3:3:8:5 in this family, 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz... Check the configuration of the EPM system registry.

  [2015 03-26 T 12: 16:47.092 + 02:00] [EPMCSS] [ERROR] [EPMCSS-05877] [oracle. EPMCSS. CSS] [tid: 25] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8:6] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.spi.impl.nvdb.NativeCacheBuilder] [SRC_METHOD: buildCache] failed operation UNKNOWN. Query execution error. Check the configuration and status of EPM system database.

  [2015 03-26 T 12: 16:47.092 + 02:00] [EPMCSS] [WARNING] [EPMCSS-10028] [oracle. EPMCSS. CSS] [tid: 25] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8:6] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.spi.impl.nvdb.NativeProvider] [SRC_METHOD: createCache] cache group failed for the native user directory. Query execution error. . Check the configuration of the EPM system registry.

  [2015 03-26 T 12: 16:47.092 + 02:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20007] [oracle. EPMCSS. CSS] [tid: 25] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8:6] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.cache.ProviderCacheThread] [SRC_METHOD: run] group cache filled to the user native Directory directory and the size of the cache of the group is 0. Status message. No action required.

  [2015 03-26 T 12: 16:47.092 + 02:00] [EPMCSS] [WARNING] [EPMCSS-10085] [oracle. EPMCSS. CSS] [tid: 24] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] building abandoned cache group. The Group of one of the configured providers cache failed. No action required. Existing group cache is used.

  [2015 03-26 T 13: 34:25.159 + 02:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20330] [oracle. EPMCSS. CSS] [tid: 26] [ecid:]

  UNKNOWN operation failed. Query execution error. Check the configuration and status of EPM system database.

  [2015 03-26 T 12: 16:47.092 + 02:00] [EPMCSS] [WARNING] [EPMCSS-10028] [oracle. EPMCSS. CSS] [tid: 25] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8:6] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.spi.impl.nvdb.NativeProvider] [SRC_METHOD: createCache] cache group failed for the native user directory. Query execution error. . Check the configuration of the EPM system registry.

  [2015 03-26 T 12: 16:47.077 + 02:00] [EPMCSS] [WARNING] [EPMCSS-10028] [oracle. EPMCSS. CSS] [tid: 25] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8:6] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.spi.impl.nvdb.NativeCacheBuilder] [SRC_METHOD: buildCache] cache group failed for the native user directory. Query execution error. Context of the same RID, already 0:1:4:4:3:3:8:5 in this family, 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz... Check the configuration of the EPM system registry.

  [2015 03-26 T 12: 16:47.092 + 02:00] [EPMCSS] [ERROR] [EPMCSS-05877] [oracle. EPMCSS. CSS] [tid: 25] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8:6] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.spi.impl.nvdb.NativeCacheBuilder] [SRC_METHOD: buildCache] failed operation UNKNOWN. Query execution error. Check the configuration and status of EPM system database.

  [2015 03-26 T 12: 16:47.092 + 02:00] [EPMCSS] [WARNING] [EPMCSS-10028] [oracle. EPMCSS. CSS] [tid: 25] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8:6] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.spi.impl.nvdb.NativeProvider] [SRC_METHOD: createCache] cache group failed for the native user directory. Query execution error. . Check the configuration of the EPM system registry.

  [2015 03-26 T 12: 16:47.092 + 02:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20007] [oracle. EPMCSS. CSS] [tid: 25] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8:6] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.cache.ProviderCacheThread] [SRC_METHOD: run] group cache filled to the user native Directory directory and the size of the cache of the group is 0. Status message. No action required.

  [2015 03-26 T 12: 16:47.092 + 02:00] [EPMCSS] [WARNING] [EPMCSS-10085] [oracle. EPMCSS. CSS] [tid: 24] [ecid: 00iSC2zG8uK8pm0_zxx0iW0000ps0000Lz, 0:1:4:4:3:3:8] [URI: / work/login area] [SRC_CLASS: com.hyperion.css.cache.CacheThread] [SRC_METHOD: buildCache] cache group abandoned building. The Group of one of the configured providers cache failed. No action required. Existing group cache is used.

  [2015 03-26 T 13: 34:25.159 + 02:00] [EPMCSS] [NOTIFICATION: 16] [EPMCSS-20330] [oracle. EPMCSS. CSS] [tid: 26] [ecid:]

  Thank you

  Anjum

  Hello

  Yes, I did all those.

  Oracle has provided a fix apply us it and then check if the problem is resolved.

  Thank you

  Anjum

• Some pages are not loading after the last update v39.

  After the updated 07/07, pages many (but not all) which worked well previously are now time and need to be recharged to load (for the first time, somehow). Started by clearing cache, then checked for malware and ended by reinstalling Firefox. I copied my profile, rather than starting from scratch with extensions (about 5 only execution).

  All of these problematic pages open correctly in Internet Explorer.

  Any ideas? Thank you very much.

  As test, please disable McAfee. It caused problems.

• Weather app has stopped working after the recent update of store

  Recent update of the store windows caused the app to stop working.  It shows the current weather, but when you try to access the application that need you right back to the start page.  I also noted the presence even when app stich (Evernote) also recently installed II, he returns to the start screen and does not open.

  Hello

  We appreciate that you gave us an opportunity to answer the question that applications do not work after you have installed the Windows Update.

  Please follow the steps and check if that helps.

  Method 1: Run App troubleshooting utility.

  Download and run the troubleshooter modern UI App and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2: I suggest you try the steps from the following link:
  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Method 3: check the Date & time zone.
  Follow these steps to change the time.
  a. double-click the current time on the lower right of your screen.
  b. then click time change date, and then click change time zone.
  c. Select your time zone and check automatically adjust the clock for the time, then press OK.
  d. press on apply, then OK.

  Method 4: check if you have the same attention to clean boot.

  Please see the link to place the computer in a clean boot.

  http://support.Microsoft.com/kb/929135

  Please note: after troubleshooting, be sure to start your computer in normal mode by following step 3.

  I hope this helps. Please get back to us if you have any other questions. We are here to help you.

• Metro apps does not work after the withdrawal of the UAC GPO

  We use a GPO to disable UAC for the domain.  We then block this GPO to the OU where we put Windows 8 test machines and work apps UAC and metro very well. However, during testing, we found that if the GPO is applied (by putting the Win 8 box in a different OU), and then deleted (by putting the box 8 win in the test ORGANIZATIONAL unit), metro apps still don't work. they open and then close immediately, but the UAC seems to work as it should.  Then, we created an another GPO and applied to the test OR, which reverses more precisely the elements that we have changed for the GPO original, thinking that the original GPO changed something that was left in this state after the removal of the box to win 8 back into the test ORGANIZATIONAL unit.  Metro apps still don't work.  We have tried all the suggested methods found in other posts, but none works.  The app fix find some security issues and the "fixed", but which did not help either.  The keys that we change specifically in the GPO are:

  User account control: behavior of the guest of elevation for administrators in Admin Approval Mode, increase the value without asking confirmation

  User account control: detect application installations and ask the elevation, disabled

  User account control: only elevate UIAccess applications that are installed in safe places, select disabled

  User account control: turn the Admin Approval Mode, select disabled

  Any help for Metro applications to work again would be appreciated.

  Thanks, but I finally understood my problem.  It's a registry setting of GPO, not associated with UAC settings themselves.

• Contact ID still doesn't work after the last update?

  I have a 5 iPhone with contact ID. It has always worked without problem until the last update 9.3.0. He now works at 50% of the time and only with my index finger, never with my footprint. I tried to reset the phone and a new analysis of my thumb, then it works the first time I use, then ceases to function requiring my access code. I've read other complaints about this same question to completely reset the phone the Apple solution. Did this and it works more constantly after a second attempt to unlock my phone. In my view, there is no update for this problem. I'm irritated after spendinf $800 on this phone, I'm waiting for the features that attracted me to it, continue to work. I'm more the high cost of a new iPhone, and I'm ready to go for a Samsung for my next smartphone. Apple updates are constant and no address operational issues that occur after the installation of the updates.

  There is an update to iOS 9.3.1. It does not address your issue, but there is no harm in giving it a try. If the update does not work and think about what you have tried to solve the problem, I suggest you to have an Apple or an Apple certified technician look at your iPhone. Make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

• Satellite L30 - 11 d doesn't start after the addition of a new module of memory

  I mounted a second chip memory in a Satellite L30 - 11 d, but windows does not start at the top. If I take one or the other exit, then it will start

  I looked at the specs for this computer, and it is said, there are 2 slots for memory, 1 to configure

  But it's my problem, and how to configure it?
  Thanks in advance

  Bobandsue

  Hello

  The phone supports 2 slots of memory, but we were already occupied.
  As far as I know one installed the module of memory was 512 MB DDR2 (533 MHz)

  I think your laptop doesn t boot because the second module is simply not compatible or it s defective!

  You can upgrade the laptop up to 2 GB DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM modules should be used.

  Good bye

• I can't update the Cloud Desktop App error 1001 designer after the installation of 5%. What can I do?

  3 times I chatted with Adobe support. At least, I had a link to 8 steps to solve the problem.

  Steps to follow:

  1. Open the activity monitor and close Adobe all related applications
  2. Navigate to: / Library/Application support/Adobe
  3. In this directory, you will see a folder named OOBE - rename this folder in OOBEold
  4. Navigate to: MAC HD/Applications/Utilities directory
  5. There, you will see a folder named "Adobe Application Manager" - remove
  6. Download Adobe here cleaning tool: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc e dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
  7. Open the cleaning tool and choose to clean 'Creative cloud' only.
  8. Download and install Creative new Cloud - https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg

  I tried all 8 steps. Step 5 "delete Adobe Application Manager" also. I got after the installation of new CCDapp - error 43 and new error messages.
  Example: Acrobat messaged it is damaged, because it has not been found the IMSLib.

  My idea was to reinstall all Adobe files and files of my Time machine backup. I am now back to error 1001.  I can't update my Adobe CC OBA programs.

  Who has an idea how to get the update of CCDapp work again?

  It is not recommended to restore backup Adobe applications or time machine, as the files need to be installed and not copied. If you have already tried to uninstall the creative application of Cloud Desktop, running the vacuum, then reinstalling and failed, then I recommend that you contact support for assistance.

  Please contact our staff of support directly by following this link: contact Adobe customer service.

  For more information, please visit: FAQ: how to contact Adobe for support?

• Windows 7 Windows Update doesn't load after installation of Windows 7 Service Pack Beta, then Outlook 2010 (Outlook 2010 has attempted to change Microsoft Update, after 24 hours, I rebooted the computer) and now, Windows Update does not work.

  Windows 7 Professional 64 bit

  Windows 7 Service Pack (so that I don't get a bunch of file wrong mistakes of corruption when using svn)

  Outlook 2010 (it works but I had to restart Windows forcefully during the first round as she tried to change the update settings)

  Now I can not install XPMode and cannot run Windows Update.  There is no error, no errors in the log of events, loading just perpetually for initial load of XP Mode or Windows Update.

  How can I fix Windows Update?

  In this forum, you will find support for Win7 SP1 RC: http://social.technet.microsoft.com/Forums/en/w7itproSP/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Game Center App has been removed after the upgrade to iOS 10.1

  Hello

  Since I've updated by phone (iPhone 5 s) iOS 10.1 I see no Game Center app in my apps list.

  How can I get it back?

  Thank you

  Hello Srikanth1520,

  Thank you for using communities of Apple Support.

  I see after update your iPhone to iOS 10, you don't see the Game Center app in your app list. I understand, I use Game Center too much and want to help you with this.

  In iOS 10, Game Center as removed from the home screen. You can still access the Game Center profile and let invites players nearby by following this path: settings > Game Center.

  All the best.

• Why is taking hours to load after the last iTunes update?

  I have Windows 7. I don't know even how long it actually takes to potentially - more than 2-3 hours - open 6-7 hours. I woke up this morning and it was finally opened after I clicked on it last night. This is certainly new behavior with the last update. The document "about iTunes" is quite annoying, because in fact it does not specify which version is installed - this should be at the top of the document, I think. However when I run "Apple Software Update" it says "your software is up-to-date." It is not very useful as a music player more if it takes 3 to 7 hours to open - pretty amazing honestly. In addition, it does not show even any UI again. The Task Manager Windows says that iTunes.exe and iTunesHelper.exe are running and showing 0% CPU, so it doesn't seem to do much. That's happened? This is unacceptable.

  More information: it seems to be stuck in the Windows kernel somewhere as "taskkill /f /im itunes.exe" is not actually kill him - even though it claims too - she is still ongoing in the Task Manager and rekilling he said the same thing:

  Good C:\Users\David > taskkill /f /im itunes.exe

  Success: The process with PID 28976 "iTunes.exe" ended.

  Good C:\Users\David > taskkill /f /im itunes.exe

  Success: The process with PID 28976 "iTunes.exe" ended.