Flex overheating 14

Similar Questions

• Satellite A500 - overheating after BIOS update to 1.50

  Hi, I hope someone can help me.

  I updated the Bios to version 1.50 a few days ago and now the laptop overheats and stops after a few minutes, when I play a game (Day of Defeat Source btw, it is not the newest and shouldn't be a problem). This problem occurred for the first time after the update. There was no problem with the temperature with V1.20 before.

  Is it possible to downgrade the bios V1.20? Where can I download the necessary file? I can just download the latest version on Toshibas website.
  I have already asked the support of aid, but they did not send me a response up to now...

  Thanks for your replies! :)

  Hi Flex Barker,

  Are you sure that this problem is really caused due to update BIOS? Normally, these overheating problems are caused by the old thermal grease or dust often due to the radiator. In my opinion, you should try to clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.
  Check this box!

  Downgrade of BIOS is normally not possible. Older versions of BIOS, you can get your local authorized service provider. :)

• IdeaPad Flex 2 - 14 d: constantly running at high speed of the fan: 8.1 Windows

  Hello.

  I have a Flex 2 - 14 d running Windows 8.1 Ideapad and real pilots.

  The fan runs constantly at high speed.

  So I have no complaint about overheating, but instead, I have to complain about is cold knees.

  Y at - it a possibility to adjust the fan speed?

  Best regards

  Eleichstetten

  I have Flex 2-15 and suffered from the same problem. By trial and error, I found that (although not documented) a specific version of the TPFanControl (http://www.staff.uni-marburg.de/~schmitzr/tpfc.html) does not work with my laptop. Opt for the 0.62e version. It is a cool utility, has several conditions of default security in standard BIOS procedures if something is still wrong. Temperature to the fan speed mappings are user adjustible, so you must refine your laptop (default values are designed for Edge E520, so don't not necesserily ideal).

  A HUGE relief!

• Envy 17: Keyboard Flex, the keys not working not properly, a fan failure

  I bought my computer laptop last January 2014 to JB HiFi, I already noticed that the keyboard flexes, but they told me that it is normal and the keys work well anyway.

  Move to the last month, I noticed that the bottom surface of my laptop keeps splitting open whenever I have fold to the top of my screen to turn it on. If it can be repaired by pressing gently to close again, it seems to have caused the laptop to ask a fan failure notice every time that I turn it on, asking me to press the Enter key to continue or wait 15 seconds so it will turn off.

  I searched on youtube on how to solve this problem and I discovered that blowing fan can solve this problem quickly. I tried several times the breath of the fan before turning on the laptop but it does not always work for me. Fan failure screen always displays at startup. I could not work long hours because I noticed that my laptop has been overheating a lot, probably because of the failure of the fan. I had to turn off for a few minutes let cool and start to work again, thus breaking any momentum of work I.

  Then, five days ago I realized that Fan failure screen is not displayed, but things just got worse. Left keys do not work correctly more for example. If I press 'e', it will enter "qe", "2" will enter the '13' and so on. Now this made me suspect that the space in which the keyboard flexes a lot and the fan failure overheating left hand side of the laptop were the cause of the keys with a malfunction, maybe condensation or so.

  Please help me out here, I use my laptop for my studies and I can't afford to buy a new.

  Kind regards

  Hi K N R K,.

  I tried your method three times, but the keys are still faulty. This is the current behavior I get:

  F5 - turn on the backlight with ' + '.
  F7 – lowers the volume with ' - '.
  F8 - increases volume with ' / '.
  2. does not show '2', but active random dialog boxes (depends on the active window)
  NumLock - types "5 [---].
  w active entry
  Shift + w - paste from Clipboard
  Enter - 'L';
  4 entries "14".
  5 entries "25".
  6 - entries '+ 6'
  -entries + '+ 6'
  x - entries 'x 25 '.
  1 entries "14".
  2 entries "25".
  3 entries '3 '.
  CTRL + v - entered "s".
  FN - inputs + 6
  SPACEBAR - entered '25 4. / »
  Up - entries '.on '.
  -Scrolling and entries "14".
  0 - entered "0" and enter
  . -entries '.» 3. "

  If ever the keyboard will work properly again, you have any recommendation with the intrados cleavage whenever I have bend toward the top of the screen to turn on the laptop.

  Kind regards

• Our time capsule will blink a light amber and utilities said that it is overheating. What is the problem?

  We had a problem with our (less than 2 years) time capsule - the light yellow flashing, the fan runs often and looking in "utility" on my mac, it says that it is overheating. What is the cause of this?

  The Time Capsule fan runs constantly, so you shouldn't be aware of the fan running on the time Capsule 'often'.

  If you receive a message that the Time Capsule is overheating, there is probably a problem with the internal power supply on the Time Capsule.

  If you have an Apple Store near you, it would be wise to take the time Capsule to let the experts check the issue and discuss your options.

• Mac overheating using safari after upgrading to Sierra

  My Macbook 2012 mid pro 15-inch was overheating after using Sierra for 10 minutes.

  Watch safari activity monitor is the cause of this. I deleted the history, cookies and data from the Web site, even reinstalled Sierra, but seems does not work.

  Uninstall "Trusteer" according to his instructions. The following may be useful:

  https://www.Trusteer.com/support/uninstalling-rapport-Mac-OS-x

• ioS battery draining / overheating

  I use a 6 16 GB iPhone on which I downloaded iOS 10 a few days ago. I hate this update! The drops of the battery to 100% less than 30 percent in less than two hours of use; and that, no phone call - just by using whatsapp and twitter. I also had days where the battery shows 23% and now after the phone dies. When you connect it to the power supply, it appears directly at 21%.

  In addition, to use the phone for about 30 to 40 minutes in a row, it heats considerably, something that was not the case before.

  If there is a way to solve this problem, please tell. Or Apple must come with a fix emergency. It's a pain to have to keep the phone attached to a power Bank.

  Hello

  Unfortunately, this is a very common on more problem iOS 10 users.

  Here is the link to another discussion: iOS 10 battery draining / overheating

  Hope Apple will deliver a fix very soon.

• Photoanalysisd process overheating my Mac on macOS Sierra

  Hello world!!

  I just upgraded to macOS SIerra in the Air of my Mac and I noticed that a process called 'photoanalysisd' is currentlu taken almost 90% of my CPU and overheat my Mac

  Anyone know what do do this process and whether he can be killed? (tried once but it came to the top once again)

  Thank you

  Ariel

  Hi Ariel

  It's Photos of indexing and analyze all your photos. It is indeed the processor intensive and depending on what size your Photos library is, could take a long time. Up to 2 days in extreme cases.

  If your computer is very hot, make sure you provide air circulation all around the case. Test lift on a wire rack as as you might have in your kitchen for the cooling of cookies or use a rack of the oven.

  If it still shows signs of overheating, you can place a fan to blow air top, or even place a cold ice pack or something cold under the computer.

  Hope this helps, Greg

• MacBook Pros overheating because Mac OS Sierra

  My end of 2014 MacBook pro 13-inch has been overheating since the installation of Sierra. 10 minutes, it's warmer than normal, 20 minutes, too hot to get on your knees. Open and run a partition with el capitan don't cause overheating after about an hour. Does anyone else have this problem? Fan control SMC said it is running at 137 degrees fahrenheit.

  The problem is related to the old system that you updated, no Sierra. A possible problem is if SMC fan control is compatible with the Sierra.

  Activity Monitor to kill Runaway processes

  Use the monitor activity on your Mac.

  Vity applications of Runaway can shorten the battery life, affect performance, and increase the heat and fan activities.

• MY CHARGER OVERHEATING AND WILL NOT LOAD

  THANK YOU FOR HELPING ME AS A CHARGER WITH ADAPTER OVERHEATING

  IN ITALY WITH BOTH 110 V AND PLUG 220V... THANKS FOR YOUR HELP! ON MY MACBOOK PRO IN 2016...

  Hello, please note that this is user forum, not an Apple Support Center. If you have problems with your charger, you should take it to the Apple Store to fix or replace. You can also contact Apple for support and service - Apple in charge in order to obtain additional information.

• iPhone 7 against overheating

  My new iPhone 7 overheating once he starts to play the video, download files, or play music. It heats up even when I take pictures.

  I found the following article, given a fix. I zero the phone and began as a facility clean, new phone and still warm.

  Here is a quote from the article:

  How to fix Apple 7 iPhone and iPhone 7 more overheating problem with these solutions:

  • There is a good chance that a third-party application is the cause of overheating Apple iPhone 7 and iPhone Plus 7. The best way to check this problem is by pressing the power and the Home button until the screen becomes black and then remove your finger from home while continuing to press power. Once you see the Apple logo - press and hold the volume up button until the springboard of the charges. If the appliance is in Mode safe tweaks will disappear under the settings menu. If the problem has disappeared, then you know that it is caused by a third-party application. You can try to uninstall one by one in order to track it down or go for a factory reset.
  • Before you Apple 7 factory reset and iPhone iPhone 7, it is recommended to wipe the partition cache of the smartphone (Learn how to clear Apple 7 iPhone and iPhone 7 more hiding). Select settings > general > storage & use of iCloud. Select then on manage storage. After that, tap an item of data and Documents. Then drag unwanted items on the left and press DELETE. Finally press Edit > delete to delete the application data.

  Did anyone else have this problem, and you have a fix or solution?

  Thank you

  I'm having the same problem. I noticed that my iPhone 7 became REALLY hot when I recover all my data to iCloud. I tried a restore, then even traded my iPhone for a new and the heat problem is still there. I think it's iOS or app related.

• I can't connect to my mac because the SHIFT key is down. Then he showed the top letter and can not connect... The mac is also overheating. I went to the apple store and they said that they cannot fix and need to send to the factory. Connection of same slo

  I just used my mac. I bought it on January 2014.

  A few months ago I couldn't connect to my mac more. There is nothing special on my mac to record.

  He was showing the wrong password when I tried to connect to my mac. It is overheating sometimes without help.

  So, I brought it to the apple store and they said that the shift key is down and therefore superior letter is all the time. and they could not help me open on the inside. Apple store guys suggested me to display somewhere or send it to the factory.

  My question is

  (1) what should I do

  (2) if I send to the factory or should go to the repair shop.

  you guys have an idea what the problem with my mac?

  I suggest you send to the factory, or if you have an apple authorized dealer / repair shop to fix the SHIFT key first, then a glance as to why the fan is still running hot.

  Maybe something has damaged the keyboard (shift key) area and also the fan internal.

  You can't have something special on the computer, but I'd always spend extra money to repair.

  The sooner, the better.

  If you need take photos or documents off the power the computer have you tried to connect an external keyboard to type your password?

• Flex Time editing

  In logic when I flex RealEdit a trap there sometimes this unwanted metal sound... I thought making bounce down could solve the problem, but it doesn't!

  How can I fix?

  You use the mode cut?

• How can I stop my overheating iPad mini?

  I just had to replace my 1-year-old mini iPad who died suddenly, shortly after the end of the warranty period.  I brought to 3 different places and nobody could make re-live or explain what happened outside because when they have plugged into the power supply, they said he seemed to have exceptionally hot quickly.  I have a new iPad mini and it seems to be getting warm very quickly.  How can I determine if it is a serious problem?  What can I do to avoid overheating?

  You use a charger/adapter Apple block or a third-party block/charge adapter?

• Flex time markers appearing at random

  I currently mix an orchestral project, using individual records of each instrument. I use Flex Time (polyphonic) and Pitch Flex rather sparingly to align everything. However, sometimes I go to random to hear crackles when playing. I'm going to the incriminated violins and come back to Pitch Flex Flex Time and see a bunch of markers at random, causing the problem! I'm doing something for this to happen, or is a problem any? Help is appreciated!

  When you switch to polyphonic edition, logical adds markers to try to "AutoCorrect" synchronization problems, but them not activated unless you click on them once you change.

  What you hear is the bending of a track itself, poor attempt at correction of pitch and time logic. Unfortunately when using Flex, you will almost always get crackling, glitching or changing random pitch where the terrain changes were not made. It is unfortunately the nature of Flex.