Flexible, set up including the tables and columns of text?

I need to set up tables (annual report) and some text between the two notes.

I would like to have frames as little as possible on every page - for InCopy workflow later.

If I paste the text of the regular column in the frames containing the tables anchored that I must apply the shift of different basis for each block of anchor text, text which is not a nice workflow.

Can you recommend a skillful means and flexible to set this place that will make the tables and text boxes flows if more lines or more text are added?

Best regards

Nina storm

For this test I did it manually, but I have no reason to think that it would behave differently as part of a style. As far as I know, ID will attempt to balance the two columns automatically. If there is not enough text to divide into two columns it will not appear to divide but always see you any extra spacing and add just enough text to be wider than the column width of Courland and your line will have a gap in it for the gutter of the column.

OK, I've just defined a style with the attribute of split, and Yes, it works in the same way. If you have a single paragraph, the paragraph is divided. If you have more than one, the block is divided, reading down by the first paragraph to the second (assuming that the linecounts work that way) in the first column before splitting into the second column. Paragraphs distributed individually. ID is to balance my columns automatically and will adjust the break if I edit, and if the number of rows is not divisible by 2 short column is on the right.

Tags: InDesign

Similar Questions

  • In SSMS, that means the space between an alias of the table and column name mean?

    Sometimes I see this: "d.PhaseKey" instead of this "d.PhaseKey".

    I'm sure this means something is wrong in the query or table - but this gives no indication of what is wrong?

    I'm not sure on how to interpret it.

    Hello

    We have dedicated support for Microsoft SQL Server Management Studio Express forums. I would have you post your query in the MSDN Forums for assistance on this issue.

    You can check the link to post your question:

    http://social.msdn.Microsoft.com/forums/en-us/home

    It will be useful.

  • Comment of tables and columns are included in the Data Modeler

    Hi all
    I used Oracle SQL Developer Data Modeler (Version 3.0.0.665) and created a data model for my project. I sent an email a PDF version of the data model to our systems analyst. She asked if I could re - create the data model and include table and column comments. Is this possible and if so how this work is it?

    Thank you for your comments,

    Seyed

    Seyed salvation,

    I used the Data Modeler and create a report. The report included 36 .csv files

    What is the purpose of this 'report' task, because 36 files csv does not sound like report to me. Watch "files > reports" feature - you can generate reports for your model. -for any model, single table or tables belonging to specific subview. The report of the complete table contains additional details, so if you need these comments, then only you can create a template and select column comments appear only. So some general information table will be also included.

    Philippe

  • How to create the table with the rows and columns using the layout?

    One of my friends advised me to put my site on the mode of provision as it is better than the standard as he said
    but I couldnot make an ordinary table with the rows and columns in mode available th
    y at - there someone who can tell me how to?
    Thank you very much

    Wednesday, April 18, 2007 21:01:38 + 0000 (UTC), "Mr.Ghost".
    wrote:

    > A friend of mine advised me to put my whole site on the mode of disposal as its
    > better than standard, as he says

    Your friend won't. Don't listen to him any more. Mode of disposal creates
    very fragile and rigid code pauses at the first opportunity.

    Gary

  • put the query iresults n tables and columns

    Hello, I have this request and should display
    but I need to be in cells as the rows and columns. just like an ecxel spread sheet but only in html.

    Here's the code.
    what I need to add to make this happen?
    Thanks in adv


    < name cfquery = "replace".
    DataSource = "#request. MainDSN #">"
    SELECT
    CompanyID,
    CompanyName,
    Address,
    City,
    State,
    Zip code
    Comments
    Of
    Company
    ORDER BY
    CompanyName ASC
    < / cfquery >

    < html >
    < head >
    ColdFusion MX Bible < /title > < title >
    < link rel = "stylesheet" href = "styles.css" >
    < / head >

    < body >

    List of companies < h1 > < / h1 >

    < table >
    < b >

    < td > < b > ID < /b > < table >
    < td > < b > name < /b > < table >
    < Td > < b > < /b > < table > address
    City of < td > < b > < /b > < table >
    < td > < b > status < /b > < table >
    < td > < b > ZIP Code < /b > < table >
    < td > < table >
    < /tr >
    < cfoutput query = "replace" >
    < b >

    < td > #CompanyID # < table >
    < td > #CompanyName # < table >
    < td > #Address # < table >
    < td > #City # < table >
    < td > #State # < table >
    < td > #ZipCode # < table >
    < td >
    < a href = "EmployeeList.cfm? CompanyID = #CompanyID #"> employees < /a >"
    < a href = "CompanyAddForm.cfm" > add < /a >
    < a href = "CompanyEditForm.cfm? CompanyID = #CompanyID #"> edit < /a >"
    < a href = "CompanyDeleteForm.cfm? CompanyID = #CompanyID #"> delete < /a >"
    < table >
    < /tr >
    < / cfoutput >
    < /table >

    < / body >
    < / html >
    ---
    When displayed, it's like
    List of companies
    ID name address City State ZIP Code
    27 555 k ddd ddd dd 90556 employees add edit delete
    26 555 k ddd ddd dd 90556 employees add edit delete
    31 dd dd dd dd 89995 employees add edit delete
    23 ddd ddd ddd dd 90556 employees add edit delete
    22 ddd ddd ddd dd 90556 employees add edit delete
    24 ddd ddd ddd dd 90556 employees add edit delete
    21 mama 252 los angeles ca 90056 employees add edit delete
    5332 Courtland Court Abilene AL 29555 employees of 14 homemade pies my add edit delete
    25 nknknk ddd ddd dd 90556 employees add edit delete
    15 Normwelland and Drake Clothing Co. 1240 Pierpont Point Boston MA 02134 employees add edit delete
    Pizza Palace 1548 16 Point culminating Freeway New York NY 00248 employees add edit delete
    29 qqqq 888 laverne za 90000 employees add edit delete
    30 qqqq 888 laverne za 90000 employees add edit delete

    13 the very big Corporation of America 5806 Glenn Hollow Lane Norcross GA 30071 employees adds change remove
    -----------------------
    without the cells/folders >

    Take a HTML Manual, waiting to change

    TO

    for the grid around all

  • Find the key referenced foreign Table and column

    Can someone please refresh my memory?

    How can I determine which table and column refers to a foreign key?

    For example, with select * from ALL_constraints WHERE TABLE_NAME = 'my_table '; I can see forced CONSTRAINTA_FK and CONSTRAINTB_FK I guess reference another table and column because CONSTRAINT_TYPE = "R", but it isn't that I get. "

    I would get all the way to the referenced table and the column I just don't remember how.

    Thank you

    Lou

    Hello

    Example:

    Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
    Connected as hr
    
    SQL>
    SQL> SELECT UC.TABLE_NAME,
      2         UC.R_CONSTRAINT_NAME,
      3         UCC.TABLE_NAME,
      4         UCC.COLUMN_NAME
      5    FROM USER_CONSTRAINTS  UC,
      6         USER_CONS_COLUMNS UCC
      7   WHERE UC.R_CONSTRAINT_NAME = UCC.CONSTRAINT_NAME
      8     AND uc.constraint_type = 'R'
      9   ORDER BY UC.TABLE_NAME,
     10            UC.R_CONSTRAINT_NAME,
     11            UCC.TABLE_NAME,
     12            UCC.COLUMN_NAME;
    
    TABLE_NAME                     R_CONSTRAINT_NAME              TABLE_NAME                     COLUMN_NAME
    ------------------------------ ------------------------------ ------------------------------ --------------------------------------------------------------------------------
    COUNTRIES                      REG_ID_PK                      REGIONS                        REGION_ID
    DEPARTMENTS                    EMP_EMP_ID_PK                  EMPLOYEES                      EMPLOYEE_ID
    DEPARTMENTS                    LOC_ID_PK                      LOCATIONS                      LOCATION_ID
    EMPLOYEES                      DEPT_ID_PK                     DEPARTMENTS                    DEPARTMENT_ID
    EMPLOYEES                      EMP_EMP_ID_PK                  EMPLOYEES                      EMPLOYEE_ID
    EMPLOYEES                      JOB_ID_PK                      JOBS                           JOB_ID
    JOB_HISTORY                    DEPT_ID_PK                     DEPARTMENTS                    DEPARTMENT_ID
    JOB_HISTORY                    EMP_EMP_ID_PK                  EMPLOYEES                      EMPLOYEE_ID
    JOB_HISTORY                    JOB_ID_PK                      JOBS                           JOB_ID
    LOCATIONS                      COUNTRY_C_ID_PK                COUNTRIES                      COUNTRY_ID
    TEMP_LEAVE                     PK_CLIENT                      CLIENT                         CLIEND_ID
    VISITORS                       SYS_C004169                    GROUPS                         GROUPID
    VLANGS                         SYS_C004170                    VISITORS                       VISITORID
    
    13 rows selected
    
    SQL> 
    

    In the output:

    TABLE_NAME                     R_CONSTRAINT_NAME              TABLE_NAME                     COLUMN_NAME
    ------------------------------ ------------------------------ ------------------------------ --------------------------------------------------------------------------------
    COUNTRIES                      REG_ID_PK                      REGIONS                        REGION_ID
    

    means that a COUNTRY table has a foreing key called REG_ID_PK that points to an array of AREAS. REGION_ID
    Kind regards

    Published by: Walter Fernández on March 4, 2009 23:26 - adding explanation...

  • Is it possible to place the table and the text online?

    Hi all

    I have a table need to align with the numbered list. Is it possible in line of the table and text on a single line. EX: 6.12 and top of the 'text' must align horizontally.

    See the screenshot of the problem.

    Currently what I do, it is to place the table in separate frame and place it online using the option of the anchor.

    Screen Shot 2016-08-30 at 1.20.22 PM.png

    Thanks in advance.

    Kasi

    We could use the options for text blocks to position the first line.
    Fixed value set to 0.

    And a table style that would govern the distance before and after a table.
    If you wish, set both values to 0 .

    We could also do a minimum in the lead with the paragraph formatting to separate paragraph following with the next table.

    Best,
    Uwe

  • I have the table and its size is full

    I have the table and its size is full when im inseting records, not insert, how do I increase the size of table
    ALTER TABLESPACE ts_tbsp
      ADD datafile 'c:\oracle\product\10.2.0\oradata\df\ts_data01.dbf'
      SIZE 4M
      AUTOEXTEND ON;
    

    Means-
    In tablespace "ts_tbsp", adding a data file 'ts_data01 '.

    AUTOEXTEND ensures in the future if whenever the data file fills an additional size of 4 M is added automatically.

    Once it is created, a new data with the extension .dbf file is created in the folder Oradata.
    Another file dbf (default) includes:-SYSTEM.dbf, SYSAUX.dbf, TEMP.dbf, USERS.dbf, etc.

    See - http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_3002.htm

    HTH.
    Vanessa B.

  • How to see the lock on the table and query?

    Hi all
    How do we see the lock on the table and query?


    Thank you
    Rafi

    Yes Rafi,

    It works fine at my end... see below:

    Opening of Session 1 with scott/tiger and:
    setting a day emp set ename = 'xx' where empno = 7499;

    Opening of Session 2 with scott/tiger and:
    setting a day emp set ename = 'xx' where empno = 7499;
    > This session is locked by a superior.

    Open 3 Session with pw/sys as sysdba and:

    SQL> set serveroutput on
    SQL> BEGIN
      2  dbms_output.enable(1000000);
      3  for do_loop in (select session_id, a.object_id, xidsqn, oracle_username, b.owner owner,
      4  b.object_name object_name, b.object_type object_type
      5  FROM v$locked_object a, dba_objects b
      6  WHERE xidsqn != 0
      7  and b.object_id = a.object_id)
      8  loop
      9  dbms_output.put_line('.');
     10  dbms_output.put_line('Blocking Session : '||do_loop.session_id);
     11  dbms_output.put_line('Object (Owner/Name): '||do_loop.owner||'.'||do_loop.object_name);
     12  dbms_output.put_line('Object Type : '||do_loop.object_type);
     13  for next_loop in (select sid from v$lock
     14  where id2 = do_loop.xidsqn
     15  and sid != do_loop.session_id)
     16  LOOP
     17  dbms_output.put_line('Sessions being blocked : '||next_loop.sid);
     18  end loop;
     19  end loop;
     20  END;
     21  /
    .
    Blocking Session : 139
    Object (Owner/Name): SCOTT.EMP
    Object Type : TABLE
    Sessions being blocked : 134
    
    PL/SQL procedure successfully completed.
    

    HTH
    Girish Sharma

  • Popup do not insert in the table and not refreshing called page...

    Greetings



    Environment: APEX 3.1.1.00.09 on AIX 5.3 with 10 gr 2



    I read a lot of threads about my question and I think I'm getting closer to the answer but in some sort have combined a too big number of suggestions and am tripping over my own code.



    Please look at my sample application on apex.oracle.com:



    Workspace: galway

    User: gwicke

    Password: gwicke



    Please start by Page3, select any agency and then click on "add a new contract."

    There are currently a label "BOLD" < facilities > < strong > 'Add new Builder' which is a link that should open a popup window. Type a name in the field, and then click 'Create Builder'. This should INSERT the row into the table builder, close the pop-up window, assign the new name of the generator to the item page calling "Name Builder" and fill the screen element.



    In current state, the application will open the pop-up, allow entry and close by clicking on the button "create Builder." However, the new constructor is NOT inserted into the table and the calling page element is not met.



    Looking at the Page elements and Session State, I can see the correct values assigned to the elements "Pn_BULDER_NAME" on the popup page (4) and the calling page (2), but the value does not appear on the screen.



    I read here where there really two parallel universes, not forgiveness, Articles of two versions of the screen, a State of Session and the other which is displayed in the browser and there are measures to be taken to be sure that is displayed is updated to state of Session I want in this case.



    I entered the Javascript code on Page4 - header to set the 'passBack2()' function and the code in the section "Option URL Redirect" to the button "Add Builder" if all goes well perform protocol ARP for the INSERT, assign items to page 2 and close the pop-up window. He gets not quite everything.



    Any helpp is greatly appreciated. Thanks to Dene for most of the suggestions I have followed by code.



    -gary

    Hi Gary,.

    I think that there is a very simple solution to this topic - is not this spot really last night.

    First, Yes, you could use a "button" to manage the call for the popup - make sure that the button is a type of URL 'button', which is actually an A tag with the appeal under target URL. Otherwise, you could take you existing a tag and use the same class for one of your buttons attribute because this should make it look like a button.

    More importantly, however, I think we could do as:

    1. on your call popup page 2, clear cache for page 4 (the popup page) - I already did in your application by updating the url

    2. on page popup, allow the user to enter their desired P4_BUILDER_NAME value (not sure if you want to do something to make it unique?)

    3 let the user click on create on the shortcut menu. He will submit the page, that will make your P4_BUILDER_RANK (pk) value and insert a new record in the table (you might consider the creation of a sequence and a trigger to handle the creation of new value PK?).

    4 - assuming that the P4_BUILDER_RANK then exist (it would not if there is a mistake somewhere), then conditionally display a region that had a piece of javascript submit page 2 and closes then itself - we don't need to move everything back to page 2 (see below)

    5. as the P4_BUILDER_NAME and the P4_BUILDER_RANK exist in the session, to which page 2 be reloaded, (A) the selection list should be updated with the new generator (still not sure why all my entries appeared downstairs instead of in alphabetical?) and (B) the P2_BUILDER_NAME and the P2_BUILDER_RANK can have Post calculation calculations together (NVL) ((: P4_BUILDER_NAME,: P2_BUILDER_NAME) and NVL (: P4_BUILDER_RANK,: P2_BUILDER_RANK) respectively)-l' effect is, if there are the values stored in the page P4 elements, we use them, otherwise, we use whatever values were in the elements of page P2

    6 - Finally, to stop (5) that happens in all the loading of page 2, you would need to clear the cache of page 4 in as many places as possible - for example, branches for a 2 page or buttons on page 2

    The reason why we cannot pass values back to page 2, it is one of the elements is a list of selection. The value we want to select will appear not on the selection list until the page has been sent. So, we can set the value and submit because the value is not there. We can introduce and define the value, because the javascript don't know when the page has been updated (or, at least, you need an independent mechanism to identify, which can get complicated).

    So, in other words, as long as we know that if the values are in the session, we can use Post calculation calculations to set our fields to these values. The only thing to keep in mind is that we must ensure that these session values only exist when in need - so we empty the cache. This principle should work for any type of terrain - but as you have no doubt seen, simple text fields can be updated by the popup directly as the field must accept any value that we give.

    My only recommendation would be to completely remove the MRU of the page process because they are not necessary (they simply confuse the issue) and you could make your fetch PK and record insert into a single process - just to keep things clean and tidy, you understand!

    When I finished last night with your app, I will leave so that javascript can create an option on the select list, and then set the value. But the method described above seems to be much simpler.

    Andy

  • How to change the rows and columns of newtabs?

    I can't change the rows and columns to mozilla version 33

    From topic: config browser.newtabpage.columns shows 5 by default, but these 5 columns appear not only 3 as before. Don't know why, but I use generally not even the default new tab page in my profile daily.

    Still works this - https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/ - extension to change the page of newTab via a user accessible interface name in the Addons, rather than routing autour Manager inside Firefox. I use this add-on in a second profile that I use for my favorite sites

  • How to export my history of travel (including the date and time) to a text file?

    I need to collect data on the amount of time I spend on specific sites, research on my thesis topic. In my browsing history data. I need a way to export the data from the history file including the date and time information in a format that is easy to parse (.txt file delimited by commas, etc.)

    You are welcome

  • How to create a grid with the tables and Boolean values?

    As part of a larger project, I'm trying to create a Subvi, which will allow me to spend a "cursor" in a 3 x 3 matrix.

    It should be 2 Boolean inputs, one for move them down in the table and the other to move them to the right. Once reached the edge of the table, the "cursor" will start back at the beginning.

    I have a vague idea of a table to 2 dimensions with LED. Once 'down' has been selected, the corresponding light to (0,0), light (0.1). Goes the same for the button 'right '. When 'down' is pressed (0.2), the LED should turn off, and LED (0,0) must light up.

    I'm sure it has something to do with the initialization of the tables, but I can't seem to find the right way to do it.

    Any help is much appreciated. Thank you!

    Your array is always empty.  Look at the detailed help for the function page replace table subset.  He says that the function has no effect if the specified index refers to a location outside the table.

    What you see on the Panel is only a view and has nothing to do with what is in the table.

    Lynn

  • Iterator for the table and form is a problem during the cleaning of the records

    Hello

    I use JDev 12.1.2.

    I have an object of the detail view. I represent a part of its fields in a table and the rest in a form. I use the same iterator. Basically, I dragged and dropped the object even from the view of the data control and created a table and form layout with the fields I wanted in each provision. I put in place a clear feature for the rows in the table with a clear"" key. -on click I delete the line of the iterator in the managed bean. When I do this the selected record is deleted and the next record is displayed. But fields entered in the form layout also gets deleted. (the form should also be showing the record currently selected - it shows but entrable fields in the form are deleted because of claire that I did on the previous line.) If anyone can help get this resolved?

    Not use the same iterator for the tables and forms here? The links are in the row (row.bindings...) for the table, but for the form it is (links...). The Delete on the current row operation is causing the iterator delete all fields of links instead of from the line? Please shed some light.

    Thank you

    UMA

    How do you rank on the iterator compensation?

    use resetActionListener in your clear button and let us know what is happening?

    Ashish

  • I have a problem with my indenting, there all of a sudden everything including the headers and about 2.5 inches in withdrawal. I have

    I have a problem with my indenting, there all of a sudden everything including the headers and about 2.5 inches in withdrawal.

    Looks like your BMP format is defined to respect the heads side.  Open the designer of TFP and try to put it like that...

    I have no idea why the script would have changed your BMP formats.  Depends entirely how the script was executed - the authore makes the script actually do.

    I suspect that you can import formats of a document where you have NOT run the script, and it would return to the formatting to the way you want.  I hope you save your work!

Maybe you are looking for

  • Why safari does say "the internet connection appears to be offline" even though I have a good internet connection

    We have a website that queries a particular web service on the web every 5 seconds. On an iPhone 6 running IOS 9.3.5. I have a pretty good internet connection. But sometimes I get the error message saying "the internet connection appears to be offlin

  • Small problem with Audio with m9500y

    I just updated my computer to Vista Home Premium x 64 to Windows 7 Home Premium x 64. I've only updated, I did a clean install. My sound works, but when I plug my headphones (at the front), the sound still plays across the screen. I looked at the dev

  • Start Windows Vista blue screen STOP: 0X0000007B

    original title: Windows Vista BSOD STOP: 0X0000007B (0X80599BB0, 0XC000034, 0x00000000, not Vista constantly giving me the BSOD start up.) Hi all Windows Vista (32-bit Home Premium) recently gave me the BSOD STOP error: 0X0000007B (0X80599BB0, 0XC000

  • Home premium window viata

    I buy don't pack widow vista home premium part No 10-52148 x Cd and part no printed in Malaysia is X 13-65749. I reboot and install window vista but can not active there. Please notify

  • All-in-one HP Photosmart C310a: "True HP" cartridges are NOT SUSTAINABLE

    I use a HP Photosmart Premium C310a series all-in - one.I also use ONLY HP #564 ink cartridges. I do basically all my printing in grayscale, which I suppose is only black ink. I don't have one of the other cartridges replaced since the receipt of ale