Flickering screen or pumping on G560 during execution of a stack

Similar Questions

• Screen dark on Portege M400 during execution of a stack

  Hallo,
  does anyone know how to get the color of light display after plugging on the m400 power?
  The "Fn"-key (F6/F7) don't work! ". I hope that there not yet special-race-necessary for this simple task background process?

  Thank you.

  The Toshiba power saver control modes and go into a low power mode, when the laptop is running on battery only.
  You can change the brightness in the energy saver.
  Simply configure the brightness of the screen to a higher level in the basic menu and you will get a clear view

• Laptop 17 HP envy flickering screen? (in fact some troubleshooting)

  It flashes when I click on an item or open a folder. Also, he goes crazy when I put on a video.

  Things I've done:

  Updated drivers.

  "Hold down the power button / stop" method.

  I have clues:

  1. I remember when I received the laptop, he would always sparkle in exactly the same way when a charger that has been plugged in was too weak (can leave message too low) and change the charger always fixed.

  Now I still have the same charger (I have 3 hp and 1 dell Chargers at home that match my laptop) and none of them seem to be "pretty" (x 2 65w 1 x 60w and 120w x 1).

  (2. another funny is that when I uninstalled my drivers Ati Radeon HD5850 completely, there is no flickering, but obviously, I need to have what I use this laptop strictly for the games)

  3. the screen refresh rate is 60 Hz and not possible to change.

  4. There is NO flickering on an external display (tried two televisions, both have a little clicker)

  5. you say that it's a hardware problem, but I actually somehow got to operate the flicker-free earlier this evening and are stayed all night play and it did not cause me any questions. It was working fine.

  6. sometimes the PC freezes (could this be a battery problem? because I currently does not use one as mine are broken and I'm waiting for a new ship)

  7. I recently had 2 blue screens of death. A when installing the ATI drivers and another that I don't remember.

  Sorry for the wall of text, I tried to make it easy to read

  Hi wallyson691,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  No need to apologize for the amount of text.  It is always better to have too much information then is not enough.

  It is very useful during validation to include your exact model of HP laptop and the operating system you are using.  How can I find my model number or product number?

  I noticed that you have a flickering screen problem and you have successfully updated the drivers but it has not fixed the problem.

  When you have uninstalled the Ati Radeon HD5850 the problem disappeared.

  You had this problem before, and it was linked to the power.  You have tried different adapters but no change.

  Have you tried a different outlet?

  You did all your Windows updates?

  Have you tried HP Support Assistant to help with updates and issues running?

  Did you run MS fix to try to solve the problem?

  Here is a link to the display quality problemsthat can help.

  If you think it may be a conflict in the origin of the problem, you can try using Microsoft System Configuration (Windows 7) to find out what is the cause.

  I would like to start a test of material just to rule out this possibility.  Test of hardware failures (Windows 7, Vista)

  You could try a restore to where he worked, using Microsoft System Restore (Windows 7)

  You can try to install the original driver to see if it helps. Using the Recovery Manager to restore the software and drivers (Windows 7)

  You can consider to recover to factory.

  Performing a recovery of system HP (Windows 7)

  During the recovery process, you will receive a prompt to back up personal files to avoid loss.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  I hope this helps.

• Smart touch 610-1010UK Office: flickering screen on Touchsmart 610

  During the evening of 11/11/15 the flickering screen started. The mouse moves the cursor, but nothing does. F1, F8, F10, and F11 repeatedly pressed when starting up do not appear all the screens.  I see others have screen similar flicker. Help would be appreciated.

  Resolved - on the Microsoft Forum, we thought that Windows Update KB3097877 on Windows 7 might have caused the flickering on the PC.  Windows have now pushed another version of KB3097877 for this problem.   The good news for those whose parts are automatic update of Windows is that all you have to do is turn on your computer and put up with the annoying flicker until the new update gives you the logon screen.

  If any good came of this, is that we should remember to save regularly.

• Graphical evolution of waveform changes during execution

  Hello

  I'm just started learning Labview graphical programming. It's so interesting that text-based programming.

  The first issue is of course acquire analyze and display. But on the screen how to change the X axis and Y, scale of the axes during execution values.

  Maybe you should b a little more clearly what kind of values you want to change. (range, offset, multiplier, etc..)

  For example, to change the interval-y, yscale user property...... minimum or maximum range. The interval-x is a little more complicated, because you're dealing with a graph, when the x offset the changes automatically the history buffer is updated.

  Of course you must also make sure to disable autoscaling, else it will be for the next update.

  You can also change the formatting of the x axis. at the moment you show zero decimal digits. Also an axis 'style' with a few values more would be better.

• masking steps during execution

  I have a sous-suite that I point the user to when asked to isolate a card failure.  To give them some flexibility, I got a popup that gives them a certain number of options (see attachment).  I have an m.o. that indicates the individual steps these select/run (i.e. '1' or '3' in the png).  Control flow (denoted by '2') is the noise they don't really need to worry and may / will cause confusion (and possibly problems for me if they select them accidentally).  Is there a way to hide these measures flow during execution control so that the user sees '1' and '2' (and other similar 'valid' selections?

  If there wasn't a need explicit to have the flow control logic, then I'd be tempted to compact all in the post of the Popup Message action.

  

  By setting the Popup Message Action to go to the step, , use Custom Condition (TRUE):

  

  And by using the following Expression:

  Step.Result.ButtonHit == 1? RunState.Sequence.Main ["MR_RPack_R55"]. UniqueStepId:
  
  Step.Result.ButtonHit == 2? "" "RunState.Sequence.Main ["End_PCI_Isolation"]." UniqueStepId:
  
  Step.Result.ButtonHit is 3? RunState.Sequence.Main ["MR_R103"]. UniqueStepId:
  
  Step.Result.ButtonHit is 4? "" "RunState.Sequence.Main ["PCI_Intf_PT"]." UniqueStepId: «»

  It should be appropriate level following the Popup Message.

  (SequenceFile attached).

  I hope this helps.

  Charlie

• Why get error during execution the FPGA VI?

  Hello world

  I have a lot of sense of wrong during execution of a program that has been correctly executed previously. I don't know what I did wrong.

  Now, whenever I run this FPGA VI, I get an error (in the attachment). And, then runs the FPGA VI, but it does not give the data required those he supposed to give as output.

  Any help or recommendations would be appreciated also.

  Thank you.

  Hi auree123,

  There are a few reasons for this error
  may occur.  Could you tell us more about what's going on?

  You are
  I get this error when you compile and if so, at what stage?

  It looks like
  as you may be running it in Interactive Mode, which means that you are viewing
  the front of the FPGA VI on the development computer that you are running - is
  that correct?  If so, you could try to create a VI on your host
  Open a FPGA reference and communicate with the FPGA programmatically rather than interactively.

  Thank you

  Morgan S

  Technical sales engineer

• button conrol min and max range option during execution

  Is it possible to change the window button conrol min and max Beach setting during execution?

  Thank you very much Nick.

• Edit/delete/add scene coordinates in the table during execution

  Hello world

  I managed to build table allows you to store and record the coordinates of the stage and remind to control steps. However, I need change/remove/add details of scene during execution. I also need to allow the user to directly edit the coordinate from the scene of the array. Wondering what someone knows what is the best way to do it? Or is it better to use the matrix or Cluster? Thanks in advance.

  Best regards

  Han Yen

  Han Yen wrote:

  Thanks much altenbach for all the advice. I tried to do a table 2D control. I've been playing with table in the control. However, I still can't find out how can I detect that I change the data in the table 2D with the more recent issue during execution? How can I then update my current table with the latest data?

  Well, the 2D table is updated immediately and you do not all the other tables.

  Do you mean that you want to update XAbs, etc. where the just changed line is already selected?

  In any case, here's a simple project, perhaps it will give you some ideas. I would recommend using also the tables for XYZPos, entrances etc. and the XYZabs. This simplifies the code because you reduce the number of terminals and table operations.

  Let me know if something is not clear to you.

• Disable the extended FIFO FPGA target during execution

  Hello

  I use a FIFO extended target in my FPGA to constantly calculate the derivative of a measured value (dB/dt). Thus the FIFO stores all values during time dt. This means dt determines the number of items in the FIFO and dB is determined by the actual value less the oldest value in the FIFO. It works well when I initialize with the code in figure InitFIFO.

  But the FIFO of compensation is not possible (see figure clearFIFO). In the while loop if "reset dB" is false, as the new value of B is written on the FIFO, then the oldest value is read from, for the number of items in the FIFO remain constant. To change dt during execution, I need to clear the FIFO and initialize it with a new length (number of items). I tried the next loop, but it does not work. The FIFO does not initilized with the elements. The length is zero and the loop counter for (#deltaB Length2) is 0.

  What I am doing wrong? Is there a better way to erase a FIFO during execution in the FPGA? I'm now stuck for 2 days with this problem and looking forward to any idea or suggestion.

  Thank you very much. Best regards

  Andy

  Hej,

  Thank you for your response. You were correct, that deltab FIFO length was 0 because the defalt value was zero. The problem is that in my host vi on the RT system I put DeltaB FIFO length in a loop of high priority and as you can see when I restart the FPGA, DeltaB FIFO length has a valid value (the code in figure 1 works well with a local variable of DeltaB FIFO length in the FPGA). But the variable to set the variable "reset dB" is under the control of the loop of low priority of the host vi. And there, I had an entry DeltaB FIFO length unwired.

  So, I learned that a control FPGA read/write unwired sends a '0' or resets the variable to its default value in the FPGA. I assumed that nothing is transferred and the last variable is retained if you let a control read/write unwired. Now, I learned of this stupid error!

  Thanks a lot again!

  Andy

• IMAQ, zoom to fit display control disappeared during execution.

  As in the title. The menu is impossible to call during execution of the control display Imaq. This has happened after the compilation of the code.

  Any idea why this happened?

  Francesco.

  I had this problem before.

  The solution is not very pretty, but it can be found here: http://forums.ni.com/t5/LabVIEW/Missing-quot-Zoom-to-fit-quot-in-application-EXE-build/td-p/905681

  Birgit

• Enter the mathematical expression during execution

  Thanks to LabVIEW 7.0.  Is there a way to enter a mathematical expression during execution?  I am collection of bytes of a device in which the user may have to configure the runtime.  For example, if a package returns 2 bytes, i and j, the user wants to run an equation on the bytes as y = 200i - 3j.  The equation could be anything.  I looked at Expression nodes and formula, but it doesn't seem to be a way to get into the equation by program.  Anyone has any ideas on this subject?

  Thank you.

  I opened LV 7.1 which is the oldest I have.  In this version, the mathematics are in the palette to analyze it.

  In the functions palette click on search and type "parse" or "formula". These searches are formula several screw analysis

  If you have only the Base of LV version, you don't have these screws

  Lynn

• modify VI during execution

  Dear users of LabView,

  I have a fairly general question about the development of a project, which requires a continuous control of the material. To be more precise, I develop LabView control and DAQ software for calorimeters in high volume in the last 2 years. Such a system requires several PID controls, and it has many subsystems. Because of the large heat capacity, it takes about 3-4 days to launch the system. So if I need to edit for example something in control of the final of a specific subsystem, I stop the LabView code, I have change the specific part, I restart the system, I wait for 3 days, and then I can see the result of my changes.

  My question is the sort of General: what is the good, let's say "best practice" to avoid such a dead time?

  Is it possible to change a VI during execution?

  I understand that if I run the independent screw, that dealing with subsystems, I could avoid this problem. But if I already have a compact 'main' VI, including all the subVIs, what can I do?

  It would be nice to have a sort of "hot swapping" feature in LabView, so during the execution of main VI of my project, I could change the Subvi that I want, and when it is ready to activate, the runtime would swap with the old version.

  Thanks for the tips and advice!

  Best wishes

  Hello

  It all depends on how works your vi...

  The only way I see is to use dynamic calls: a vi called dynamically is editable even if appellant vi is running.

  If you change the callee until the caller calls the vi vi.

  Is how the appellant under vi (this includes the values of connectors and run the VI):

  

  Best regards

• How can I draw several plots by using the XY graph during execution?

  Hello

  I want to draw several plots in the graph XY to the means of execution user will select the number of plots that he wants to draw, depending on this value, I have to get these values and use table generation and then I give to graph XY.

  During execution, but how to do this?

  Please help me in this regard.

  Kind regards

  Herald

  Why start a new thread?

• For a control that can be initilaized during execution

  In the case of an enumeration or a constatnt ring. The options to select should be listed when programming

  The option to select is possible during execution.

  I have a table, and I can send the 1st column of values in the menu drop-down, select one during execution.

  Help, please.

  Hi, Mike Grugh,.

  I don't know how to do it with a table drop-down list boxes, but if the number of lines in your file, then you can try the attached example.

  Kind regards

  Amine31

  (Give the congratulations to the right answers and Mark as a solution if your problem is resolved)