Float does not work? I need the text to the right of the image, but my CSS does not work. Pls help

Similar Questions

• my epson dx4050 will not work or open I use wind 7 now, but it does not work pls help

  my epson dx4050 will not work or open I use wind 7 now, but it does not work pls help

  Because your message was clearly not your comments on the web site of MIcrosft responses, I have he left the comment forum in the forum 'Hardware and drivers' Windows 7.

  When you say it "will not open', do you mean physically or you want to tell the printer object in the printers and devices folder does not open when you double-click it?

  Have you tried to delete the printer and add it again?

  He has already worked?  If so, have you changed between yesterday and today?  The device is supposed to be compatible with Windows 7 and should not need a separate driver, but if you have Windows 7 32 - bit, you can try using the driver on the Epson website.
  http://eSupport.Epson-Europe.com/FileDetails.aspx?LNG=en-GB&data=lkuCfcvA9cw77whFcRdwis4JOQH9mtNd&ID=324678

  How do you connect to the Stylus DX4050?  It is USB, wired network or wireless network?  The documentation says it is USB, but I connected USB printers to the network, then maybe you have as well.

  The more details you provide on your printer and your system, the better people can help you.

• Second monitor will be in the image, but will not extend.

  HP Desktop

  Windows 7 64 bit

  Video ports factory

  I have a connected VGA and works very well.

  The other is attached through DisplayPort and it will be in the image, but it will not display as a second monitor or even detect it.

  I've been working in display of all settings.  Any ideas?

  Thank you

  John

  Hi John,.

  Thanks for posting your request here in the Microsoft Community.

  I suggest you to see Microsoft article procedure below and check if it helps.

  http://support.Microsoft.com/kb/976064

  For more information, see the links below.

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  I hope this helps. Please post back if you need more help, we will be happy to help you.

• Down on the Image, but not on the mouse scroll bar event?

  Hi all

  I use an event "Mouse Down" on an image to save the coordinates X and Y of the click and increment a counter.  My problem is that I'm looking at an image with a scroll bar that I want to use to set what part of the image is visible.  When I click on the scroll bar, I set off the mouse event down and increments the counter, which I won't do.

  Is there a way to implement a mouse event to the bottom so that it will ignore clicks on the image scroll bars?  If not, can you think of another way to accomplish what I'm doing?

  Thank you!

  Some quick ideas:

  The scroll bars will be a fixed height or width of the right or at the bottom of the indicator. In the mouse to the bottom of the event handler, if the click happens to a set of coordinates that are in a region of scroll bar, you know, do not increment the counter.

  OR

  Maybe you can overlay a transparent image control such that it covers the image but not the scroll bars, and find clicks on this second control.

  Mike...

• I want to reinstall creative cloud. It is not working, pls help!

  I want to reinstall creative cloud. It is not working, pls help!

  Uninstall using the uninstaller from adobe.

  If this fails, CC help | Uninstall the creative desktop application Cloud

  then reinstall apps download Adobe Creative Cloud | CC free trial Adobe

  If this fails, explain what you see.

• I opened MY Facebook id and I get my photos of friends from my mistake I don't know who im key press + photos going to hide how I is new im trying to come back, but I never see still photos im click on the image, but im can not show me

  I opened MY Facebook id and I get my photos of friends from my mistake I don't know who im key press + photos going to hide how I is new im trying to come back, but I never see still photos im click on the image, but im can not show me

  This has happened

  Don't know how many times

  is 2 days befor

  It is possible that you clicked the 'Block Images' item in the context menu by attempting to save an image.
  Check the image exceptions: Tools > Options > content: Load Images: Exceptions - see the web content, pop-ups, fonts and language settings

  A way to see what images are blocked is to click on the favicon (Site ID icon) on the left side of the address bar.
  Click on the "More information" button opens the Security tab of the "Page Info" window (also accessible via "tools > Page Info").
  Go to the tab Media of this "Page Info" window.
  Select the first image and scroll though the list with the arrow pointing downwards.
  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  See also the problems that cause to not show images and http://kb.mozillazine.org/Images_or_animations_do_not_load

• Multimedia Windows will not play on the image but games on laptop desktop

  Try so a video a meeting running xp and windows media file player I see on the cell, but the image of prijected is a black screen. Help

  Your laptop needs a graphics card that allows for the video to appear on a second monitor. Will be about all the most modern.
  You must go in the settings of your graphics card monitor and say the screen map who's who, tell him to use the second monitor or say whether the master screen #1 some can only overlay on the master.

• I am DollarPhoto Club, I am from Brazil and one I can't find the US $0.99 promotion by imagem. Pls Help?

  I am DollarPhoto Club, I am from Brazil and one I can't find the US $0.99 promotion by imagem. Pls Help?

  Hello

  Unfortunately we do not currently sell Stock to the Brazil.

  Please refer to the FAQ for more information: Dollar Club Photo - photo galleries free high quality royalty and vectors - Club picture Dollar

  There is a special offer on Adobe Stock?

  Yes, good news! If you are a member, you get an incredible reduction on Adobe Stock *:

  • $9.99 per month for 10 images per month for 1 year
  • Additional downloads will cost $0.99 during the promotion

  In addition, all your unused Dollar Photo Club downloads will be automatically transferred to Adobe Stock.

  Please note that unused downloads transferred to Adobe Stock will be valid for 1 year, and only after 1 year unless you cancel, your subscription will be charged at the standard subscription rate.

  * Note that Adobe Stock buying is not possible in some countries,. However users in these countries can always transfer their unused Dollar Photo Club downloads and creative resources to license Adobe Stock with these downloads. Note that unused downloads transferred to Adobe Stock will be valid for 1 year.

  Sign in to your Club picture Dollar account to discover the conditions.

  Thank you

  Bev

• 6 of Lightroom. When I opened to develop & load an image from the image after is removed a pale blue screen.  If I shared the screen I can see the front of the image but the image after rest as a blue screen. Clues please?

  When I opened to develop & load an image from the image after is removed a pale blue screen.  If I shared the screen I can see the front of the image but the image after rest as a blue screen. Clues please?

  Most likely, LR has problems talking to your video card.

  In the Preferences dialog box, tab Performance, disable the use of the GPU.

• I want to buy the picture but I can't install it in my computer. I already had the trial. What can I do? pls help... Thank you.

  I want to buy the picture but I can't install it in my computer. I already had the trial. What can I do? pls help... Thank you.

  Please visit: FAQ: how to convert a trial to a membership?

  If you receive error messages, please let us know.

  Guinot

• Print screen - when I use the print screen key and then the paste into Word by pressing Ctrl v, I do not receive a copy of the image, but get a little red square about 1/4 "which does not contain the image.

  Can you tell me what causes this?

  Hi Kurt,.

  Thanks for posting your question on the Forums of community of Microsoft.
  I understand from the description of the issue, that the images stuck through the print document screen Word does not display.
  Let me go ahead and help you with the issue.
   
  Please answer these questions, which will help us to help you best.
  1. don't you make changes to the computer before the show?
  2. what version of Microsoft Office is installed on the computer?
  3 are you facing this problem in Word or other programs?
   
  I suggest for the link and follow the steps in the article:
  A red X character appears when you paste a linked image in Office 2003
  http://support.Microsoft.com/kb/825772#appliesTo
   
  If the problem is specific to the Office programs, you can also post the query Office Forum.

  Check out the link:

  http://answers.Microsoft.com/en-us/Office
  
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• HELP file, place the Image but will not go

  I converted a Word doc to html

  to be able to file, place images in blocks of text in CS4.

  When I file, place the image (was be a jpeg file), it placed, I turned and it reduces, but then it would not move.

  How to become mobile if I apply skin?

  If you place the image in the text block, so it is called inserted graphics and it doesn´t suppose to move around with the mouse more, it flows with the text.

  It s like a giant letter in your text.

  If you want to place your images in floating frames, Don t put them inside text blocks, drop them outside your page first, and then move them to the right places with the mouse or use X / coordinated in Control Panel.

  If you have need of your images still flows with the text, use the object anchor instead of inserted graphs...

• Confused why my drivers do not work pls help!

  Recently, I did a reinstall of my windows 7 I have a model CQ5310UK.

  I tried to get the main drivers for my model and went to this page here which I believe is the right one to get: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=4104...

  I chose the first one on the list: Original NVIDIA Unified Graphics Driver

  I downloaded fine and opened it and it came with this: your system does not meet the requirements of the operating system. Update has been canceled. (9997)

  I don't understand why he did what I did all well I chose the version that is windows 7 which is what I use! can someone help pls!

  Hi Big bluestem

  I answered you in your previous post

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/graphics-drivers-for-CQ5310UK-not-working-very-confused-pls-help/m-p/758647#M15076

  More information on your error

  http://h10010.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=in&DocName=c01728720

  Your erros is because the 64-bit and 32 bit OS, you must choose the good update, as intsturcted in my previous answer, go to the nvidea Web site and download from there.

  Concerning

• While the outline around slices will not disappear - pls help

  Hello

  
  

  I worked feverishly to raise this campaign announces that the Director had decided last Friday that our time would not March 24 but on March 17,... of course I didn't achieve this goal, but 3 out of the 4 pieces are done, I just have a problem with the version in Spanish of the Web page... I have 6 slices which are swapped images at the bottom of the page.  When exporting, it is a white line indicating the slice and the green bar is broken up.  You can see the effect at www.nctt.net/instituteSPTest.htm.

  I have tried everything I can think to merge down layers, confimring the slice is a foreground image and making it the same color as the bar, removing any green and start from scratch...

  It does not on the English version and I used the same model for both... (www.nctt.net/instituteTest.htm).

  
  

  There, no one knows how to remove the outline in white and have a green line without small white lines?  Makes me crazy...

  Thank you in advance for any advice you can provide.

  Jennifer

  Well, I finally solved the problem, but it took awhile.  If anyone wants to know, first of all, I went in the Export Wizard and choose javascript instead of gif animated overview (didn't even who was selected!), then in the preview window, I select the best quality of jpg, no. Smoothing, unchecked sharpen color edges and remove unchecked the unused colors.

  Also, I went in the export options and changed the table 'space with' to spacer of nested tables and select nonbreaking space for content.  I also checked the box of color of cloth to use.

  I have the feeling that it was the table settings that were causing the problem and not the settings in the Export Wizard, but who knows what I know that I can go home now.

  Jen

• IMAQdx deletes the images, but LostPacketCount = 0?

  I use the example of OR 'Grab and Setup.vi attributes' with a run of camera XIMEA USB3 at 60 fps on Windows 7 (i5 - 4310M, 2.7 GHz, 8 GB)

  «Description: The Grab and configuration example VI attributes allows the user view the current attributes and settings, update the attribute parameters, acquire images continuously and display images in an image control.»

  I made a few changes. I have two image display windows instead of one. In the "': Frame made" event, when the "ActualBufferNumber" is the same, the image is displayed on my left picture frame and when it is odd, he appears on the right. "  My scene evolves at 60 fps synced to the release of material from the signal from the camera ("exhibition-start"), so the same and odd field images are significantly different, and it is easy to differentiate.

  It just works as expected. However, at random times, usually several minutes apart, that the acquisition process apparently ignores a framework such as the left and right images are exchanged.  Sometimes he jumps a framework, we get, then jumps immediately another frame, as well as an output image flashes and then returns to the initial display.   I display the IMAQdx 'LostPacketCount' and it is always 0. When the program runs, watch Windows Task Manager using LabVIEW between 14 and 17% of CPU and system total CPU is never more than 41%, so it doesn't seem that the CPU is overloaded.  In addition, the moments of drops of framework do not match the peak CPU use. I'm following up separately from the 60 Hz frame-sync camera output signal and it's precisely stable (with ~ 50 nsec jig on the nominal 16.667 period msec) that you would expect from a hardware trigger, there is no stuttering or gaps here.

  'Acquisition of configure' entry I started with 3 stamps, then 6, then 100, but the frequency of the events of frame-depot does not seem sensitive number of buffers. Do I have to have unrealistic expectations of the capture and display 60 fps without frame drops? How to debug this problem?

  UPDATE:  I tried to run another one "Grab and detect jumps Buffers.vi" which leans on the signal "Stamp Out number" of "IMAQdx is Image2.vi" and it detects correctly ignored by executives. The output of "Jump buffer Count" shows that change between folders in Outlook on the acquisition of 60 frames per second in general fall 5 pictures.