Floppy USB drive not recognized when installing WinXP on Satellite Pro L40

Similar Questions

• We get the popup "USB device not recognized", when nothing is connected.

  Original title: pop up message

  I connected the USB cord to transfer information from your old phone to new phone via Itunes.  Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize.  Nothing is plugged in, but message appears every few seconds.  How can I get him to stop?

  Hello

  It seems that you are getting the popup "USB device not recognized", when nothing is connected.

  What is the brand and model of your computer?

  I suggest to uninstall the USB controllers and check if you get the context menu.

  
  

  Method 1: Remove and reinstall all USB controllers

  
  

  a. clickStart, type devmgmt.msc in the start search box and press ENTER.

  b. expandBus USB controllers.

  c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.

  d. restart the computer, and windows will install the rear USB drivers.

  If reinstalling USB host controllers fails to resolve the issue, go to method 2.

  Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• USB device not recognized when I connect my iphone to my computer

  Original title: USB device not recognized

  I get the error message "Unrecognized USB device" when I connect my iphone to my computer.  It is the same as the one I use for months.  Same computer.  Same sync cable.  I have changed everything, including hang iphone to my wife instead of mine and get the same message.  I also did a restore on my computer that doesn't change anything.

  Hello

  At this point, I think it's a good idea to run a scan for viruses/malware on the PC with the anti-virus software that you have installed.

  Also, if you haven't already, I would try removing the USB controllers and restart again, now that the updates of Windows are installed. Don't forget, you can even download the drivers directly from manufacturer support site for your PC, if they install automatically when you restart after their removal.

  Finally, take a look at the thread I linked below. The first answer is quite similar to that mentioned above in this thread, but there are also a few other really good measures listed there as well. Then take a look at the linked thread and see if that helps at all.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-device-not-recognized-in-Windows-7/8106a712-A13E-4ca5-b82e-c3961cc254b1

• USB flash drive not recognized and install

  USB port works fine in my computer, I have Windows vista basic with acer laptop
  but when a usb flash drive is inserted it not recognize and install
  unitentified error of device and driver to the generic sound of end error

  pls help

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• external USB drives not recognized under xp pro 64

  I bought a genuine version of XP Pro 64 to load on my computer and because Win 7 froze with drivers nVidia graphics.

  When I plug a recently bought Seagate Goflex or one of the new Western Digital external hard drives, they are not recognized.

  They do not show on my computer or disk management at all.

  They appear in Device Manager with a yellow question mark big under 'other devices '.

  I right click on the hard drive in the Device Manager to update the driver, and it always fails.

  Before ask you, these USB drives work perfectly on my other XP Home 32 System. The cables are good.

  I tried different ports, front and rear... no good.

  My system XP 64 Prp is updated w/Windows update and software chip to the motherboard.

  Strangely, I have a hard drive WD Passport USB 500 Gb one-year-old that works fine on XP 64 system.

  WD technicians say that I am the only one with this problem. PlugNPlay needs no driver, what do say.

  I also have IDE/SATA USB cable w / the power cable, I use to connect my old internal drives.

  Works fine on the XP Home 32, but I get the error "USB to ATA/ATAPI Bridge" in the device with the 64-bit System Manager.

  Yes these devices are all "turned on."

  Something is missing on the XP 64 system.

  Help is very appreciated.

  Been looking for a solution for a week now.

  Thank you.

  Hello

  See the following articles that may help you resolve this problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196
  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?
  http://support.Microsoft.com/kb/314634

• USB device not recognized when connected to the computer

  original title: USB port problems

  When I plug a usb device, I get a message not recognized usb device (one of the usb devices attached to this computer has malfunctioned and windows does not recognize)

  Hello

  ·         Since when are you facing this problem? Were you able to use this USB device on the system before?

  ·         Remember to make changes to the system?

  ·         It happens with all USB devices that try you to plugin for the system?

  I suggest running the fix which is present in the article below and check if the problem persists.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Also, I suggest you return the item mentioned below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• HP ProtectTools encryption recovery disk: USB drive not recognized

  I encrypted hard drives of a couple of notebooks HP Elitebook 8560p using HP ProtectTools drive encryption. Saved 4GB USB DRIVE formatted FAT32 discs recovery keys. BIOS and latest available drive encryption versions today.

  Today I decided to test the functionality of recovery. So, when the BitLocker Drive login screen appears at the start, I select Recovery. Then I click on browse to find the recovery on the USB drive key. However, the USB is not visible doesn't help not hit 'refresh readers '. I tested it on two laptops. The system simply does not see the USB drive at this stage (works very well under Windows). Any ideas? I lived the most obvious BIOS settings.

  An update on a case where someone has the same problem:

  The USB key is recognized and everything works fine if the laptop is in its docking station, and the USB is connected to the USB port of the docking station.

• USB drive not recognized on the A30-151 in XP

  After a clean install of Windows XP Pro on a Satellite A30 151, a USB device remains in the category 'Other' (after installation of the graphics and audio drivers, modem) for which no driver seems to be available on the drivers CD. At this point, the category "USB" contains four entries, two standard "Universal Host Controllers" and two "OpenHost' controllers, with the default drivers.
  I suspect that the missing device can be a USB 2.0 "PCI controller host improved USB" from another manufacturer, but Toshiba does not offer a driver for XP for it then it should be supported by the OS (?).
  Any suggestions as to what can be and what drivers need?

  It turns out that XP does support USB 2.0 according to the SP1, it seems a pre - SP1 version of XP Pro leads the native Windows drivers is not available. For anyone in a similar situation, it seems as if a) upgrade to SP1 or b) install the hotfix Q312370)

  http://www.google.com/search?hl=en&q=Q312370_WXP_SP1_x86_ENU.exe

  for the English version should throw a lot of download sites) followed by the autodetection of the native Windows drivers should do the trick. However, the following SP1 problem may come into play

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001c0d

  in this case, the "NEC PCI to USB Enhanced Host Controller B1" driver required original can be found by searching for "USB driver" for "Windows 2000" for the Satellite A30 Toshiba driver download page.

• USB device not recognized when connecting to printer

  Hello Microsoft,

  Hear I have problem in my PC. I connect to my new printer (RIOCH SP 100), but in my Winodws7, they show me that your usb device is not recognized. I try to use the resolution of problems. but it was a failure of dem, so now what is the way to solve my query.

  Hello Dhruv,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the complete model of your printer RICOH SP 100 number?

  Thank you for details on the issue.

  This problem may occur because of settings and corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Please also run the printer Troubleshooter and check.
  Reference:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If this does not help, use method 2.

  Method 2:
  Controllers USB reinstall and check the issue. Please follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

  (b) in Device Manager, expand 'USB Bus controllers'.

  c. right-click any device under "Controllers of Bus USB" and click Uninstall.

  d. repeat the same steps for other devices.

  e. Once completed, restart the computer.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• USB stick not recognized when you try to copy network settings

  trying to Setup network printer and need to copy my network settings on a USB stick and transfer to the printer wireless.

  When I plug the USB in the system recognizes the disk put option on the screen doesn't change to the other to allow the settings file be saved.

  I tried 2 different laptops and 2 different usb drives.

  Hi GavinStrik,

  You can try to reformat the usb drive and check.

  You can try to plug the drive and make a backup of the data and try to format the drive.

  Note: Before you reformat the player take a backup of the data.

  For more information, please visit the following links:

  Formatting disks and drives

  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Hope this information is useful.

• FN key not working after installing winxp on Satellite A200 1CJ

  Hello

  I got my winxp pr satellite. And I found all drivers xp, including shortcut keys for my mobile on www.toshiba.nl.
  But now no longer works FN - F6, F7, F8, F9 & F10. These are the functions to configure the brightness, wireless network, power & utility Zoom mouse pads.
  Someone can help me. I already try a lot of shortcut keys, but it won't work.

  I hope someone can help me.

  Best regards

  Ritesh

  Hello

  For the use of the FN functions you need some Toshiba designed and utility tools. Unfortunately they are not available yet. Obviously Toshiba didn t start support WXP A200 but I hope it will happen soon.

• DVD/CD burner is not recognized by XP on my Satellite Pro U300

  I just bought a Toshiba U300 Satellite Pro with Vista installed :-(.

  For my work, I need to use software that is not compatible with Vista... so I installed my XP - pro software.
  I ran Windows Update a few times, until there is nothing to update.
  I installed all the drivers on the Toshiba site.
  I've updated the BIOS.

  Everything seems to work, butX-(the DVD writer is recognized as "UNIDAD DVD-RAM (e :))"
  XP just a READER of CD/DVD, not recognize... a WRITER and I am absolutely sure that he's a WRITER, because I used it on Vista to burn a bootable cd.

  Someone knows what to do?

  Hello

  I think that this can be resolved very easily.
  Go to the properties of the CD/DVD (right click > properties), select the tab called record.
  There, you must activate the option called CD (mark) activate recording.

  By the way; have you tried to use a burning like Nero for example software?
  Check it!

• Cannot install WinXP on Satellite Pro A200 - No. HDD

  Hello

  Please can someone help me. I just brought 52 portable Satellite Pro A200. They come with pre-installed Vista, but I want to wipe and install Windows XP. However, I have a big problem - when I put my XP CD in and start it, then click on enter to continue, he tells me that the Installation cannot continue until Windows cannot find any hard drives (although I can boot under Vista so I know that the HARD drive are ok).

  Thanks for looking,

  Matt Courtman
  Cromwell Community College, UK

  You must install the Intel Matrix Storage Manager.
  This driver can be found don page Intel:

  Please also check this thread. It s very useful:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

• USB stick not recognized when creating recovery disc in Windows 8.

  Original title: Recovery Media Creator prblem

  Hello-I have a desktop K430 Lenovo with a 1 to HDD, Win8 64 b, 12 GB of memory. I'm trying to create a recovery disc using a flash drive HP with 32 GB. I bought a 2 GB Tech Universe that should do the job, but the Recovery Media Creator suggest 16 GB.

  I installed USB Flash Drive 32 GB HP which is identified as HPv125w (F): the computer and selected for how to manage the unknown data or take any Action. I formatted the Flash Drive ENF to match my file system. I also chose computer /Devices removable and open as portable devices in the hope that the flash player would be recognized by the Recovery Media Creator, but it didn't happen.

  I run the following command to create a Recovery flash drive:

  Control Panel/All Control Panel Items/Recovery/create a recovery disk/copy the recovery partition from the pc on the recovery drive (I checked this assertion). I clicked NEXT to continue the process.  I was instructed to connect a USB and the reader must be able to contain at least 16 GB. He also said that everything on the disk is deleted. Identity of the flash player (HPv125w (F) does not appear on the page of recovery media and THEN is grayed out. I need help with this problem.  After checking the Microsoft Community, I learned that I could use search from the start page or opening of office and enter recoverydrive.exe and make appear the Recovery Media Creator. I performed this task once again, but I got the same results, as shown above. Thanks in advance.

  Hello-I have a desktop K430 Lenovo with a 1 to HDD, Win8 64 b, 12 GB of memory. I'm trying to create a recovery disk

  Identity of the flash player (HPv125w (F) does not appear on the page of recovery media and THEN is grayed out. I need help with this problem.

  You can also try using diskpart to his list volume control just to compare his view of this device.

  BTW, there is another user of Lenovo, who tries something similar but without keyboard to help...

  http://social.technet.Microsoft.com/forums/IE/en-us/04e45c11-b5c0-48b0-AB58-3f96a1040e40/how-to-restore-Windows-8-from-a-recovery-USB-on-a-Tablet-Wo-physical-keyboard

  I think that it may actually be further ahead than you?    ; )

  Good luck

  Robert Aldwinckle
  ---

• USB device not recognized when connected to Toshiba Port Replicator II

  I recently bought the Replicator above, loaded the software, restarted my computer and only then connected the device according to the instructions.

  I get the error message "unrecognized usb device".
  When I go in my gear and check for driver for this device 'unknown' told me that no drivers have been shipped for her

  So my Replicator does not.
  I deleted the software and reloaded with the same result

  I have a laptop Tecra A8 running Windows XP Service Pack 2
  Any help or suggestion would be appreciated

  As much I know PortReplicator II only is not supported for Tecra A8. According to the sustained specification is Port Replicator III + only.

  If you try to use the option not supported, it is not easy to give any help.