Flow 11: SD Stream 11

Similar Questions

• Flow 11: 11 stream Webcam blurry

  I have a netbook HP flow 11 is in a State of almost nine. Everything is going well except the webcam product a blurred image, and there is change of color. for example, my light blue eyeglases gaze.

  I tried to install YouCam, but it is blurry, there is on the native camera in Win 8.1.

  I uninstalled the camera in Device Manager and reinstalled. Windows has automatically installed the driver for "HP Truevision HD". But nothing has changed.

  It is quite like the protective plastic is still on the lens, but I looked closely and not seen here. I tried picking him home with a touch of x-acto, but all I could do is to take the lens itself, which has a blue ring around it.

  In fact, I just searched the lens off, and the problem is still there. I guess it's pointing to a faulty cam.

  Hello @paul1149,

  Welcome to the Forums of HP Support!

  I stumbled upon your post on the Webcam and wanted to help!

  Try to review the following document and let me know how it goes:

  Computers HP - Webcam troubleshooting (Windows, 10, 8)

  If you're still having problems, then you can try to open the laptop to check if the Webcam cable loose.  Other than that, you can consider contacting the HP support by phone for additional options.  You can use the following http://www.hp.com/contacthp and create a case for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Happy New Years!

• Need confirmation that my streaming rtsp for the WVC54GCA settings are correct

  I have therefore recently implemented the WVC54GCA for viewing remotely via internet. I use Verizon DSL Westell Versalink 327W bridge, with the latest firmware (4.4.3) I was able to transmit an alternate HTTP port (1025), which allows the two TCP/UDP to my static IP of cams. I was also able to transfer the RTSP port (554), which allows the two TCP/UDP to my static IP cam. My problem is that my router will not forward any additional ports other than 1025 and 554.

  There is a setting on the camera for RTP data port (ranked from port 5000) and I can't transfer port 5000. I tried to change the setting of the cam to a bunch of different other than 5000 ports (6881, 1024, 1900, etc.), but no matter what I try, no other ports can be opened through my router. It seems to work via routers firmware (i.e., it looks like fixing to 1025 and 554, which advance) but when I check the port using canyouseeme.org or RCMP the port is classified as closed or camouflaged.

  I am able to view the cam of my office at rtsp://camname:554 / xxxxx using Quicktime or Realplayer.  However, neither my phone nore my friends can connect.

  My question, since I can see the flow of mobile streaming outside my local network using Realplayer or Quicktime, is "am I configured correctly for mobile (rtsp) streaming?  What is a cell phone rather than a problem of configuration problem?

  Sorry for the post above, I confirmed that my cam is correctly mobile video streaming.  The video stream has been consulted using a Samsung Omnia and Blackberry Curve.

  I am now home and confirms that, even if I've implemented port 5000 port forwarding, this port is listed as closed via canyouseeme.org.  The power supply works well, so I'm happy.

• Flussonic of FMS relay/re-stream does not!

  Hi people,

  I am trying to relay/re-stream a stream located on a Flussonic server, and I use this code

  {

  NC1 = new NetConnection();

  myStream1 = Stream.get ("localstream");     "foo" is the name of the stream that could be relay "livestream".

  myStream1.onStatus = {function (info)}

  trace ("info ns" + info.code);

  }

  NC1.onStatus = {function (info)}

  trace ("info netconn" + info.code);

  If (info.code == "NetConnection.Connect.Success") {}

  myStream1.play("external-streamname",-1,-1,true,nc1);      "livestream" is the name of the stream that is getting published on the remote server,-1 for the live stream

  }

  Else if (info.code == "NetConnection.Connect.Closed" |) {"NetConnection.Connect.Failed")}

  NC1. Connect ("rtmp://flussnoic-server-ip:1935 / static /");

  }

  }

  NC1. Connect ("rtmp://flussnoic-server-ip:1935 / static/");   no need to specify "_definst_.

  }

  But I get the following error in the admin logs

  netconn NetConnection.Connect.Success info

  NS NetStream.Publish.Start Info

  NS NetStream.Play.Reset Info

  NS NetStream.Play.Stop Info

  NS NetStream.Unpublish.Success Info

  netconn NetConnection.Connect.Closed info

  for those who seek a response...

  I found that FMS was not looking for the given stream name "external-stream" instead he was looking for "* flv: external flow '.

  added * flv: name... in the flow once the stream name was changed to * flv: in flussonic, it was a fun party

  Thank you

• One or more modules of App?

  Hello! Can someone explain to me when it is necessary to create several App modules in the project template? And when it is beter to all BC in a single App Module?
  
  I have a lot of BC in my application and I want to add in several modules App.
  
  Waiting for answers, cordially, Debuger!

  Debugger,
  You can only nest AMs if either you use the methods of the AM or you need to commit both together, otherwise, they can be independent.
  Simple logic to make AMs other than advice and standards referred to in the documentation provided by Jabr & Umesh is
  -keep similar functionality to 01:00 (let's say you have a rent an employee flow & pay another stream, you can have separate AMs for them if they donot use of similar artifacts)
  -Try to keep all these artifacts that need to be committed at once, based on the flow of your UI at 01:00.

• Begin broadcasting only when people are watching?

  I got a fitted page that houses a live webstream nightly music in a place. Every evening (except Sunday) the data flow active from 20:00 - 02:00 standard time. Some nights, I noticed there is no flow, but the stream plays every day no matter what. To save bandwidth per month, I try to understand how single stream if Somebody's watching.

  So basically the camera would record locally, and when someone connects to the site said something that the server starts broadcasting. If the person leaves, the server stops broadcasting. Has anyone tried this before? I use Influxis to my media streaming, and they assured me that I can run scripts on the server side.

  Right now I use 3 on CAMERA doing the streaming to the server.

  I would appreciate any help or a point in the right direction

  -Matt

  Hey Matt,

  After some tinkering aside server, we were able to create some sort of solution. You see OUT features reduency, allowing it to automatically reconnect to Flash Media Server, defined in the FMS URL field, if disconnected. So we came up with is, on the onDisconnect for any client event, we check the number of clients connected. If the number of connected clients is equal to one, check us if the customer stays a customer OUT. If it's a client OUT sign us the user OUT.

  When OUT trying to reconnect it can't unless there is a present spectator. Once a viewer is present the OUT could connect and spread.

  application.onConnect = function (p_client)
  {
  If ((p_client.agent) .indexOf ("OUT") == 0 & application.clients.length)< 1="" ) ="">
  trace("***onReject***")
  application.rejectConnection (p_client);
  } else {}
  trace("***onConnect***")
  application.acceptConnection (p_client);
  }
  }
  application.onDisconnect = function (p_client)
  {
  if(application.clients.Length == 1) {}
  for (i = 0; i< application.clients.length;="">
  If ((application.clients.agent.agent) .indexOf ("OUT") == 0) {}
  trace("***onDisconnect***")
  application. Disconnect (application.clients.Agent);
  }
  }
  }
  }

  I hope this helps.

  Thank you

  Influxis Support

• Audio dropouts in streaming for magical flow device

  Hello

  I had a certain audio hang ups today.

  Check the journal of Unix, what is happening:

  26/05/2016 15:06:29.889 configd [52]: network modified: v4 (en0:192.168.0.4, en3 +:192.168.0.2) DNS * Proxy SMB

  to, I think, the same time as the break in the game.

  Has anyone else seen elsewhere? He is not related to hiring, occurs during playback of MP3 and FLAC.

  Looks like a problem with the network for me, however.

  I use an Airport express to keep WiFi (faster flow network).

  First of all, you did recently updated on your Mac or the AirPort Express? You use a VPN connection to the streaming source? Using Back to My Mac? Since you play files FLAC, I assume that you do not use iTunes as the audio server... correct?

  I recommend that you start troubleshooting cela by disabling the DNS cache on your MacBook Air with this command in Terminal:

  sudo dscacheutil-flushcache. sudo killall - HUP mDNSResponder

• Gen apple tv 4 th all flow in full hd or 780? Tv channels get streamed in full hd?

  Gen apple tv 4 th all flow in full hd or 780? Tv channels get streamed in full hd?

  It will be the HD stream if it is HD or 720 p, if it's 720 p.

  There is a setting for HD or 720 p.

• Stream 11 HP: HP flow 11 not answer anything

  I went and stopped a program to run at first upward and do not know which.  Now my computer does not respond.

  It opens not internet, open Task Manager, no indication for the Device Manager, nothing shows to restore or retrieve.

  I thought to go to the hp support and try to down load a new driver on a flash drive, but it seemed in down loaded to my other pc instead of the flash player.  Shit, I hope that there is a way for the load in a disc of catering for the 11 model d010wm

  product # K3Y84UA #ABA

  Geeks their who can direct me in which it may be to the bottom of the apron or Uploading a stream 11 mw 8.1 hp 64 nit a player flash and direct me on how to open and down load it into the HP 11 flows?  Please, enough, enough, please?

  I like to tinker with things, but tend to go too far and things f. No hope for me.  Furthermore, I have no money to buy anything.  I work at Wal-Mart and get out on rugged computer who wants nothing tell

  I don't know, but the option to continue could make the recovery.

• Flow 11: Use as extra 'hard drive' SD card on a HP stream

  I want to use a 64GB SD card for additional storage. It seems that I can't leave the SD card in place when I stopped because the stream is not "see" the SD card on the re-start unless I have to remove and reinsert the card.

  I am doing something wrong or it is impossible to start with the SD card in place and recognized him automatically?

  Ideaally I want to install software on the card rather than the 'C' Drive to free up space.

  Hi @RogerM-Ohio ,.

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your flow 11 HP can't see not the SD card after a reboot. The Flash doesn't support 32 GB 64 GB. The SD card will not be read until you reinsert because it is not a device bootable or installed on your laptop.

  Thank you.

• Stream 14: 14 flow does not start

  The notebook in question (Stream14) belongs to my boss. It is uncertain whether windows 10 has been put on it.

  The symptoms are:

  On startup, I get the HP logo, and then he asks that the dongle (USB key). When it is added, it is said "Trying to recover", said "restore to an earlier version of windows. He then returned to the HP logo and constantly repeats the words above. I left on for more than 3 hours, thinking that it actually works, but it's just a loop.

  I even tried F11, no difference, F9 and choose the USB, no difference. I tried the USB key, and all the necessary files seem to be there.

  I even tried booting via a reader of DVD USB using a DVD of windows, but it doesn't start the reader, even if I did the DVD player, the first boot option in the BIOS setup.

  Any advice?

  Gerryd544

  The recovery partition may have been deleted.  You will need to use the recovery to use media that has been created specifically for the Stream 14 to reinstall the operating system.

  Contact warranty HP support to inquire about ordering a recovery for 14 flow flash drive.

  https://support.HP.com/us-en/contact-HP/product/HP-stream-14-z000-notebook-PC/7296828/model/7415863

• Dynamic Live Stream Don t take the best flow of my bandwidth

  Hi @all,

  I hope someone can help me with my problem - btw. Sorry for my English!

  I create a customer application side where is only a component of the FLVPlayback2.5 and a little AS3 script.

  AS3:

  Fl.video import. *;
  VideoPlayer.iNCManagerClass = NCManagerDynamicStream;

  myPlayer.fullScreenTakeOver = false;

  var dsi:DynamicStreamItem = new DynamicStreamItem();
  myVideo.source = "dynamicStream.smil".
  dsi.startRate = 1548;
  DSI. URI = "rtmp://x.x.x.x.x/dani_/";
  dsi.addStream ("test548", 548);
  dsi.addStream ("test848", 848);
  dsi.addStream ("test1548", 1548);

  
  myPlayer.play2 (dsi);

  My encoder is configured with three components:

  1. Video: 500 Kbps - Audio: 48 kbps
  2. Video: 800 Kbps - Audio: 48 kbps
  3. Vid: 1500 kbps - Audio: 48 kbps

  I start the encoder and everything seems fine in the newspaper.

  In my browser (Safari or Firefox), I go to my site in html and start the stream after 6-8 sec. But in any time with a lower speed 548 kb/s and nothing look like the flow is move at a different rate.

  I tried with the smil playlist and the result is the same. Only the lowest flow is published.

  My network connection is on a line of Zadeh 100MBit, so I Don t think that my connection is the problem

  What I did wrong? Or I missunderstood something in examples for dynamic streaming?

  Greetings from Munich/Germany

  Daniel

  EDIT: Should I change something in the ini file or in a nother from the server configuration file.

  Message geändert durch 77nautius

  Is this problem was there, but it has been fixed now, and the new version will soon be on the public Web site until there please wait.

• Flow 8: Need help for upgrade of windows 10 8 Stream

  I'm trying to upgrade my 8.1 Stream 8 Win to win 10 to aid Assistive technology update from MicroSoft on this page

  https://www.microsoft.com/en-us/accessibility/windows10upgrade?tduid=(14c348e893a91089cb2980533c6ee1...) ()

  I started by updating Win8.1 completely so that there is nothing on the Tablet and then downloaded the Upgrade Wizard of Windows 10. When I started running he says he he had enough memory, but it stopped at 95% and said: he is there not enough of free space. I let him try freeing up a space, but he could not find anything.

  I found a few threads on the forum about this, but they all were too complicated for me or a different installer that had buttons that is not in question.

  I'm not experienced with this sort of thing, so I need very simple instructions. Can someone help me with this?

  BTW: I have empty drives USB 8 GB and 4 GB and a notebook NC6400 with Win10 that I can use during this operation, if that helps.

  The second line in your original post mentions 64 bit where my concern. Yes you correctly found that the stream 8 has a 32-bit version of Windows and and x 64 compatible processor. Due to the needs of additional memory to a 64 bit OS, I don't think even to try to install a 64-bit version of (even if it were possible). If Windows 8.1 32 bit is upgraded by using the normal upgrade process then yes it'll upgrade automatically to 32 correct but the version of Windows 10 Home. Multimedia authoring tool will allow you to choose which version you download however (as the machine that allows you to download the Windows version may not be the device that you want to upgrade) that is why it is important that you get the 32-bit version only.

  If the instructions you found on the upgrade via a USB stick with Windows good, 10 build are difficult for you to understand so yes, I suggest you use the line of Support technique Microsoft and get some "hold your hand" during the process. As to how you connect the USB to the Tablet I'm not sure what you mean by an adapter "regularly." If it has good caps at each end to connect your USB to the Tablet, then it should work. I used a 4 port powered USB 2.0 Hub when I did my upgrade etc because it allows me to keep the Tablet powered / load all by allowing multiple devices to plug - do not just the memory stick, but also a combination of mouse and a USB keyboard. I posted the details of the cheap and simple hub I bought for this purpose elsewhere on this forum. HTH

• Stream HP laptop: starting flow Hp problem

  So I was reseting my hp running windows stream 10 and deliting all files more space on my laptop

  But when it was reset, a mensage appeared saying that the reset process was not over and a problem that happened...

  Welll, ive tried to start it after that, but it was just released the hp logo, starts and restarts again and again in a continuous cycle

  What should I do?

  Thank you

  It looks a bit like his do not booting from the USB, but the essential motivation.

  If you try to leave the trunk of the tablet itself to usb, this could be the problem.

  Have you tried to hit the Esc key to bring up the Start Menu, then select F9 for the boot device Options window?

  From there, you should see the USB key to select.

  Also, I first create a new installer for the tool of creation of media on this USB key, just to make sure its working and up-to-date.

  If you don't get it to start the USB key, at the beginning of the process, then I remove all to leave them and let him create what he must again.

• Stream HP 11: upgrading wifi on HP flow 11

  Hi I have a HP flow 11-d010na laptop and I deleted Windows and installed Suse Linux on it.

  Unfortunately there is no good Linux driver for native Broadcom wifi card.

  So I already bought 2 wifi cards intel, advance-n and wireless-n. The two do not work although there are good Linux drivers for these cards. I was wondering if HP has a whitelist for the wifi cards. If so, how can I know what is on this list or how to turn off this list. Thank you very much.

  Kyle Merci for your reply. Both suggestions are valuable. In my view, it is safe to assume that the Realtek RTL8723BE would also be in the white list on my taste of flow HP. Thanks again Kyle. Other suggestions are also welcome.