FLT Sim Airbus Series 1 & 2 will not load in the correct folder
Hello
I just bought Airbus series 1 & 2 MS FltSim x and he refuses to load it into the appropriate folder (cannot install this prog pse select your correct dir fltsim x) (c:\prog files\ms games\ms fltsim x files). The file is located in this directory already, but it will not in charge. It seems that all my fltsim x files are in a different directory (AJP\documents\fltsim x files) and not the one preceding.
I tried to rename the AJP file but will not work and I moved all the files for the fltsim x folder in prog file and still it will not work however, I also noticed that when I moved all the files of the AJP folder to put it in the folder of the prog and I try to play the game, it loads a .bin file in the folder of the AJP it each time.
My computer is a computer game of superior specification with 8 MB of memory and a graphics card excellent MS Vista Ultimate x 64 bit fully updated running.
I have had some problems before with FSX and had to use MS help and of the uninstall and reinstall FSX a few times and then after that it didn't even once I formatted my hard drive and did a full reinstall of everything and since then everything has been ok, but I tried to load the game on my laptop and couldn't as MS States that the game has been used many times , so I will not be able to uninstall again.
If you are not sure? So I am but if you can help I would be grateful.
Thank you
Hello andy04,
Thank you for visiting the website of Microsoft Windows Vista Community.
Try to install as an administrator. Right click on the installer and select run as administrator.
This should solve your problem.
Let us know if these steps solve your problem. I hope the information is useful.
Kind regards
Anthony
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Satellite L500 will not load beyond the screen "Welcome".
Hello
My Toshiba Satellite L500 laptop will not load beyond the screen "Welcome". The right slider thing keeps going around and around, but won't on my desk.
Last night, he went into a temporary profile and he got a message saying "another profile cannot load at this time please try again later".
Any help would be greatly appreciated.
Thank you
KaraThe error message is not known to me and also looking in google didn t get advice.
Maybe your Windows operating system is confusing upward.Have you tried to boot Win 7 in safe mode?
Try this. Restart your laptop, press the F8 key.
In advanced startup options, select the option called Mode without failure.If the laptop does not start Safe Mode, try the last good known Configuration option.
If this n t help, try to fix my computer. Here, you can choose between different settings.
Who could solve that problem is HARD drive recovery that helps you define the notebook to factory settings. But it also means that your disk should be formatted!So be aware of this!
-
Windows XP will not load past the Blue error screen
Hi, wondering for a while if someone can help me...
My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.
No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.
So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.
In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.
Thank you, Jay
Hello
It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(
To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.
Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD
See you soon
-
My 2009 macbook pro will not load. The technician said that the motherboard must be replaced. Is there a less expensive repair?
Apple has set the rates, price around $300 repair program. I don't think you can get a price of paste elsewhere. However, there are third-party sites that provide repairs, parts and helpful videos. Google is your friend.
-
Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.
Hi akilesh.sharma18,
Please repost this in the Audio forum from the laptop to help.
-
Lexmark printer will not load to the top
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: I have a lexmark X 8350 printer and my laptop Dell studio 1737 will not all drivers read and do not print
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
· What happens when you try to print on the system? You get the error message?
· You are able to print a test page?
Method 1:
Uninstall the printer from the system and reinstall again on the system and check if the problem is resolved.
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
Method 2:
I suggest to uninstall the drivers and the software that is installed on the system, and then reinstall the drivers from the link below.
For Windows Vista 32 bit
For Windows Vista 64-bit
Method 3:
I suggest to run the printer Troubleshooter and check whether the problem is resolved.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
To get help, I suggest you check with the support of Lexmark.
http://support.Lexmark.com/index?channel=supportAndDownloads&page=home&locale=en&UserLocale=en_US
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Make an empty folder to simplify the example of this problem recently of news. Everything I do, even a single word names, will not go into any other file with this next window: "Destination path too"
long. "
The file names (s) would be
be too long for the
destination folder. You
can shorten the file name
and try again, or try alocation with a
shortest path.
Hello
Welcome to the Microsoft Community Forums.
Looks like you get an error message "the file (s) would be too long for the destination folder. You can shorten the file name and try again, or try a location with a shorter path.
This normally occurs when the file system is corrupt.
I suggest you scan the computer for the error. Follow this step to do the same thing:
1. click on start
2. type: CMD, according to the results, right-click CMD-> click 'run as administrator '.
3. at the command prompt, type: chkdsk /rWhen you restart your system, your computer will be scanned for errors and will try to correct them.
Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
In addition, you can consult the following link for more information:
Hope this information helps. Get back to us with more information so that we can help you.
-
Update: it was not after all water damage. The day I splashed it I also sink it terribly low on battery. Here's how I diagnosed and brought it back:
1 held the power and volume for 16 seconds until what the phone into bootloader mode. Choose the first option to continue the initialization of the phone.
2 opportunity expert virtual Blackberry to test all functions of the phone. Everything worked.
3. went to settings-> battery. 0% battery does not charge.
4 powered off phone
5. "battery charged" the phone:
1. connect to the most powerful USB charger that you have (for me, 3 amps)
2. as soon as the battery with white exclamation point icon appears, unplug the phone
3 phone plug back in. When the battery icon appears unplug. Repeat 20 - 30 times
6. Finally, the phone will start just showing the Red instead of the battery icon. At this point, that the costs of phone for at least an hour. The status indicator turns yellow
7 turn on the phone and load completely
I learned about the "battery charge" of the old Playbooks Blackberry. Apparently, the voltage of the battery may get so low that the BIOS of the phone which will detect and not to load. But during the 10 seconds or so to detect, the battery will be a slight amount of charge. If you keep pushing a little fresh this way over and over, finally he could get enough power to be larger than the minimum voltage and start loading.
Good luck to everyone who has this problem.
---------------------
Does anyone know a provider for private blackberry battery? My phone got damaged (by a very small amount of water, not overwhelmed), water and is now show white battery icon with exclamation point and do not start. I would try replacing the battery to see if it is the problem or if the load circuit. (Yes, I know that this isn't * technique * replaceable by the user, but I have the backcover and can do). BlackBerry support said they don't sell them and wants to $275 + to fix the device, which is almost the cost of a new private on Ebay. Someone know a provider or have a spare battery that I can buy?
Thank you
-Lester
Edition of the above to reflect the real problem. The battery is just incredibly low. Come to think of it, I'd run it for about 2 days and what I thought was caused water damage was just a super low battery. I "battery charge" it. My discription full of how I did which is updated above in the first post.
-
Default brushes will not load since the last update: How can I solve this please?
Everytime I open Photoshop I get the message: "could not load the default brushes because the file is not compatible with this version of Photoshop. It became a problem because I downloaded the latest updates for the package of the Photo. Please can someone advise me on how to solve this problem.
Good, great to hear that solved your problem. Please check back...
Benjamin
PS If you are satisfied with the answer, remember to mark (solving answer) correct. This marks the problem solved and will help others to find solutions to similar problems. Note: you must be logged in to the forum.
-
will not load past the bios reboot loop
Does not load my insperon 5160 passed the BIOS most of the time, and when he does, he could stay on for 5 min. then the tun of willingness to black screen and go into a reboot loop. How can I fix this and what might be the cause of the problem?
Hello
Try to run the following command in the recovery console and check.
CHKDSK drive: / r
Note In this command, drive is the drive where you want to install Windows XP.
Reference:
Description of the Windows XP Recovery Console for advanced users
http://support.Microsoft.com/kb/314058
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265You can also try to disconnect all external devices connected to the computer, except the keyboard and mouse and check if you are able to boot.
-
HP Pavilion dv4
TSST Corp CDDVDW TS-L633L ATA DeviceControl Panel / problem report and solutions
Problem: Could not load software driver status: sent reportDescription
Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.Signature of the problem
Problem event name: PnPDeviceProblemCode
Architecture: x 64
Hardware ID: IDE\CdRomTSSTcorp_CDDVDW_TS-L633L___0400___
Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
The PnP problem code: 00000013
Driver name: cdrom.sys
Driver version: 6.0.6002.18005
Driver date: 11/04/2009
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033Additional information about the problem
Bucket ID: 619663520Control Panel / Device Manager
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.I tried:
Update driver software
Uninstall / find the hardware changes
Uninstall / reboot / new hardware found
Properties / verification solutionsHow can I fix it?
Hello
Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.
http://support.Microsoft.com/kb/982116
You have to restart the laptop after that.
Kind regards
DP - K
-
Hi all, my problem is the following. Off my laptop the night before, an upgrade has been installed as usual. However, when I tried to start my computer the next day, I was meeting with a choice of operating systems, one was vista and one was something called "openSUSE 11.2 installer (NET).» Of course I wanted to choose vista, but when selected has been sent to a screen that read (sorry for the amount of the entry).
Start "openSUSE 11.2 installer (NET)".
(hd, 1)
Specifien type is ntfs, partition type 0 x 7
/openSUSe/ kernel linux devfs = mount, dall ramdisk_size = 65536 = ftp install: //ftp4.g wdg.de/pub/opensuse/distribution/SL-OSS-factory/inst-source/ server = ftp4.gwdg.de lang = en splash silent vga = 0x31A
Error 17: File not found
I don't know much about this sort of thing, so he thought better to include everything I could. At first, I tried to reload Vista, but it just opened the same screen, so found the vista disc that came with the laptop and it is stuck in. I ran sytem repair and system restore and both have had no effect.
I'd appreciate any help is sorting this point, but if I have to reinstall vista (what I hear the hard disk wipes), is it possible to backup all my files to be reintergrated later.
Thanks for any help!
"Off my laptop the night before, an upgrade has been installed as usual."
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost, please include Error Codes, including what you have already posted, andexactly what happens after you tried to update.
In this way, you will receive the best help.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner
-
Illustrator script will not print on the correct printer.
I call an Illustrator using BridgeTalk script within a script InDesign, but I doubt it would make a difference. Here's the question: we have four printers on the network that are named 'Printer 1', ' printer 2 "," printer 3 ", and"printer 4"on each Mac on the network." " I want to print a document to a specific printer, based on the computer that is used to run the script. Pretty simple idea and I have illustrated it in my script in progress below:
function illustratorDie(artFile, dieFolder, companyName, orderNum, shipDate, dieInks) { // Before anything else, find out to which printer we'll be sending our document. var machine = $.getenv("USER"); $.writeln("(IL) Environment variable 'USER' is " + machine); var localPrinter; var shipPrinter; switch (machine) { case "aerostar": $.writeln("Machine is aerostar."); localPrinter = "Printer 4"; shipPrinter = "Shipping"; break; case "apache": $.writeln("Machine is apache."); localPrinter = "Printer 3"; shipPrinter = "Shipping"; break; case "navajo": $.writeln("Machine is navajo."); localPrinter = "Printer 3"; shipPrinter = "Shipping"; break; case "seneca": $.writeln("Machine is seneca."); localPrinter = "Printer 2"; shipPrinter = "Shipping"; break; case "warrior": $.writeln("Machine is warrior."); localPrinter = "Printer 2"; shipPrinter = "Shipping"; break; case "tomahawk": $.writeln("Machine is tomahawk."); localPrinter = "Printer 1"; shipPrinter = "Shipping"; break; case "Marketing": $.writeln("Machine is Marketing."); localPrinter = "Printer 1"; shipPrinter = "Shipping"; break; default: $.writeln("Machine has defaulted."); localPrinter = "Printer 3"; shipPrinter = "Shipping"; } $.writeln("(IL) Thus, the local printer is " + localPrinter); // First, create a new document for the die. var dieDoc = app.documents.add(); // Then open the document that contains the artwork. var artDoc = app.open(artFile); // Group the art from the document with the artwork, // just in case it hasn't already been grouped. artDoc.layers[1].locked = true; artDoc.selectObjectsOnActiveArtboard(); var sel = artDoc.selection; var newGroup = artDoc.groupItems.add(); newGroup.name = "ArtGroup"; newGroup.move(artDoc, ElementPlacement.PLACEATEND); for (var i = 0; i < sel.length; i++) { sel[i].moveToEnd(newGroup); } // And copy the artwork from the art document to this new die document. var copiedArt = newGroup.duplicate(dieDoc.layers[0],ElementPlacement.PLACEATEND); // Now we can close the art document as it will no longer be needed. artDoc.close(SaveOptions.DONOTSAVECHANGES); // Back to our die document, let's fix up the art now. // We do so by first centering it on the page. copiedArt.left = ((dieDoc.width - copiedArt.width) / 2); copiedArt.top = (dieDoc.height + copiedArt.height) / 2; // Then we change all paths to black & white. // For this, we will assume that there are no gradients nor raster art. var pathsToRemove = new Array; var blackColor = new CMYKColor(); blackColor.cyan = 0; blackColor.magenta = 0; blackColor.yellow = 0; blackColor.black = 100; convertBW(copiedArt); $.writeln("Removable paths: " + pathsToRemove.length); for (var v = 0; v < pathsToRemove.length; v++) { pathsToRemove[v].remove(); } // Now specify the contents of that text block. var newLine = String.fromCharCode(13); var textContents = companyName + newLine; textContents += orderNum + newLine; textContents += shipDate + newLine; textContents += newLine; textContents += "W: " + Math.round((copiedArt.width / 72) * 100) / 100 + newLine; textContents += "H: " + Math.round((copiedArt.height / 72) * 100) / 100; // And finally actually place the text block while formatting it. var textDesc = dieDoc.textFrames.add(); textDesc.position = [36, dieDoc.height - 50]; textDesc.contents = textContents; textDesc.textRange.characterAttributes.size = 36; // Let's set print options for the two printers. var localPrintOptions = new PrintOptions(); localPrintOptions.printerName = localPrinter; var shipPrintOptions = new PrintOptions(); shipPrintOptions.printerName = shipPrinter; var myJobOptions = new PrintJobOptions(); myJobOptions.copies = 1; shipPrintOptions.jobOptions = localPrintOptions.jobOptions = myJobOptions; $.writeln("Printing to " + localPrintOptions.printerName); // Now we need to print this text block to the local printer as well as the Shipping printer. $.sleep(2000); dieDoc.print(localPrintOptions); $.sleep(2000); dieDoc.print(shipPrintOptions); // Before saving the file to an .EPS, we need to hide (or delete) the text block. textDesc.remove(); // Lastly, we need to save this document as an .EPS file in the proper location. // Set the SaveOptions first, just like the PrintOptions earlier. var dieOptions = new EPSSaveOptions { compatibility = Compatibility.ILLUSTRATOR16; preview = EPSPreview.TRANSPARENTCOLORTIFF; embedAllFonts = true; cmykPostScript = true; postScript = EPSPostScriptLevelEnum.LEVEL2; } // And then actually save the document. var savedFile = unescape(dieFolder.toString()) + "/" + artFile.name.slice(0,-4) + "_Die.eps"; $.writeln("Inside Illustrator script, savedFile is " + savedFile); dieDoc.saveAs(File(savedFile), dieOptions); // Finally, close the document. dieDoc.close(); return savedFile; // END OF MAIN. function blackIt (currentItem) { ... } }
I at first thought that the script was running too fast, so I added the two "$.sleep (2000)" orders near the end to see if it would help - it didn't.
The bits of important, after defining the variables localPrinter and shipPrinter, come after the line / / Let's define the printing options for both printers.
Instead of print to the local printer, sometimes it will print to the other. For example, I am the machine called "apache". The script must localPrinter on "Printer 3". And, according to the statement of $. writeln() , he does. However, despite this setting, almost always displays "Printer 2"! From time to time he actually does it print "Printer 3".
This happens on other systems, too. It almost seems as if it prints to a printer that is numerically the one less than that to which it is supposed to print. "aerostar" prints often to "3", "warrior" often it prints for "printer 1", and then the 'marketing' impressions, we do not yet all printers output a page!
What is the cause to happen and, more importantly, what can I do about it? Help, please!
Of course, I get another set of printers listed. Nevertheless, I found a solution for this. Since it seems that the printerName of PrintOptions property is buggy, I decided to try the printPreset property instead. I created of the presets on each computer, one for each printer and the accordingly modified script. Works like a charm now. Now the switch statement:
switch (machine) { case "aerostar": $.writeln("Machine is aerostar."); localPrinter = "Printer 4"; localPrintPreset = "Color Proof Printer 4"; shipPrinter = "Shipping"; break; case "apache": $.writeln("Machine is apache."); localPrinter = "Printer 3"; localPrintPreset = "Color Proof Printer 3"; shipPrinter = "Shipping"; break; case "navajo": $.writeln("Machine is navajo."); localPrinter = "Printer 3"; localPrintPreset = "Color Proof Printer 3"; shipPrinter = "Shipping"; break; case "seneca": $.writeln("Machine is seneca."); localPrinter = "Printer 2"; localPrintPreset = "Color Proof Printer 2"; shipPrinter = "Shipping"; break; case "warrior": $.writeln("Machine is warrior."); localPrinter = "Printer 2"; localPrintPreset = "Color Proof Printer 2"; shipPrinter = "Shipping"; break; case "tomahawk": $.writeln("Machine is tomahawk."); localPrinter = "Printer 1"; localPrintPreset = "Color Proof Printer 1"; shipPrinter = "Shipping"; break; case "Marketing": $.writeln("Machine is Marketing."); localPrinter = "Printer 1"; localPrintPreset = "Color Proof Printer 1"; shipPrinter = "Shipping"; break; default: $.writeln("Machine has defaulted."); localPrinter = "Printer 3"; localPrintPreset = "Color Proof Printer 3"; shipPrinter = "Shipping"; }
and the transfer block that accompanies it, which uses the new variable:
// Let's set print options for the two printers. var localPrintOptions = new PrintOptions(); localPrintOptions.printPreset = localPrintPreset; var shipPrintOptions = new PrintOptions(); shipPrintOptions.printerName = shipPrinter;
I hope this will help someone else who is faced with this problem!
-
Pogo Java based games will not load with the new update.
I just got the update last for Firefox 3.6.14. I was always able to use Firefox to play games on Pogo.com. After the update today, I can enter the site, but 90% of the games won't download. Pogo said in their help pages:
Mozilla has a documented bug filed for Java support in Firefox 3.6.14. Since many Pogo games work on Java technology, it is obviously impacting on Pogo customers who are trying to play their games with the latest version of the browser.
Is this being addressed and if so what time frame we are looking at? Pogo suggests other browsers, but I prefer mozilla above others. Tbank you, SusanYou can return to 3.6.13 by downloading and running the 3.6.13 Installer, you can get it from http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.13/win32/en-US
If you install 3.6.13, the next update that you will be notified is 3.6.15
-
Re: My Satellite laptop will not load to the top
Hello
My laptop isn't even a year yet, it worked fine until today.
I turn it on and the bit of Toshiba comes up then after that it of just a black screen and then it saysRealtek rtl810ie/8102e pci-e ethernet controller v1.07 (080320)
PXE - e61 media test failure, check cable of
PXE - mof exiting pxe rom.
no boot device - insert boot disk and press any keyI put t have a startup disk or anything! Fact does not matter what it means?
Thanks for any help
Layla
Each book has specific boot order and in this boot order components of different material as drive optical drive, hard drive, or LAN.
The start is always set in the BIOS settings and nothing, for instance HARD, LAN and ODD disk boot order. If the laptop can not boot from HDD ist starts from second defined device (LAN) and continue.
Boot order of your laptop satellite does not for me, but somehow, it stays on the startup of the LAN device option and you can see this message on the screen.
Restart your laptop, and press F2 to enter the BIOS settings. The default value and try again. If the same start arriving portable once again but this time with the F12 for boot options-enter key. With top and bottom arrows have chosen press and device disk HARD come. If the HARD disk is OK, OS should load up. If this is not the case, there is a problem with the operating system preinstalled.
Please test and send feedback.
Maybe you are looking for
-
4th generation Apple tv does support 4 k uh?
They said my yesterday at the Apple Store in Austin that the new Apple TV (4th gen) will support 4K UHD for my new TV. I almost bought. Has more research online and read Apple don't would not support 4K with this Apple TV. Who is this? I think that p
-
What format should I convert my MTS/M2TS videos for?
Hello Last Saturday, we (a group of 5 fans) filmed a full rock using consumer camcorders level festival. Required time, I wasn't the one to import the images, it's a friend who uses Sony Vegas on Windows 8. All the files he gave then to me (some 500G
-
I was not able to get the flash player since the upgrade to FF 7.0.1 on Debian Linux. I followed the instructions in "How do you install the Flash plugin? (https://support.mozilla.com/en-US/kb/installing-flash) several times. As I said this is a prob
-
Hello!! I ordered NI DAQ 6008, now my question is what do I need external power for my hall sensor or the hall sensor is powered by data acquisition itself? thanq
-
don't 80040256 error code no sound on my computer laptop gateway m 520
Sandbox dawnloud driver for audio of manifacture. C00D11BA error message My laptop no sound.