FM Radio problem, as the uneven decimals

Similar Questions

• Windows media center on starting indicates there is a problem with the failure of a component of recording on the radio and the video how can I solve this problem

  Failure of a component of recording
  Some of the files needed to play radio are missing or corrupt. Registration of the media center components may have failed.

  The above message is displayed whenever I put Media Center on and try to watch television. The guide lists are also not downloading.
  And im having trouble with the tuner.
  Tuner not found
  the tuner is defective or not installed.

  someone help?

  Hello hillsiderWH,

  Seems that your windows installation is missing most important files, I suggest you boot to the top with your windows media center installation CD and run repair on the windows installation. This will replace any missing files and I hope that your media center up and running. If this isn't the case, it could be a problem in the registry.

  -Alex

• OfficeJet Pro 8500 a - problem with the wireless radio

  First of all, I'm sorry for my bad English. I hope that you have little imagination when reading. I'll start to describe the problem and the lower list, I hope, all the relevant information you need to help me.

  Yesterday, I bought a brand new OfficeJet Pro 8500 has.

  Since I have found a little bit of my computer and my router I configure for wireless connection.

  All whent fine, the printer connected to my WIFI network without any problem and I was able to do a scan using the HP scanning software. How ever, when you try to scan a document nother directly after the first that did not work. I got an error message on the computer telling me that the computer could not connect to the scanner and it could be caused by the firewall. I also tried to print a word document, but it seemed that the document could not be sent to the printer during the observation of the State of the printer. Finally I gave up the print job and began to study the problem.

  By using the service to help in the HP software that I did all the things he suggested me to do. I have disabled the firewall, open TCP/UDP ports, restarted the router, the computer and the printer in different combinations, nothing worked.

  All the while the printer was connected to my WLAN, indicated by the State of the network printer and the router. I was about to give up but thought I should try only to disable and enable the transceiver wireless in the printer. To my surprise this solves the problem. I was in a position of scan and print documents.

  Today, after work, I tried to do another analysis, and the same mistake was present. Once more I did magic with the wireless radio and it has temporarily solved the problem, but he came back a few minutes later.

  Summoriz, the error can always be corrected by disable and enable the radio wireless, but after some time (a few minutes) the error returns that it self.

  I played a bit and discovered that it is possible to access the built-in Web server during the error. Not all functionality of the EWS seems to work perhaps (it's OK) but I can't among many things has see the State of the network and I can even do an analysis using the integrated Web server.

  I tried to reconfigure the printer using the printer setup wireless and also after a reset of the printer and it does not help.

  I hope someone on this forum knows a solution to my problem.

  Useful information:

  Computer OS: Windows 7

  Router: Thomson TG784 (I have an internet connection, phone and TV provider and this box takes care of this)

  Encryption: WPA - PSK

  WLAN: 802. 11 b / g

  No filtering MAC or SSID hidden

  Other devices on the network are two mobile phones and a Motorola Xoom Tablet

  Printers, IP address: 192.168.1.81

  Firewall: WIndows (the router is disabled)

  Concerning

  Thord

  Problem solved. Reinstalled the PC s/w has little time and finally he solved the problem.

• Problem with the use of MID/LEFT functions

  I have a problem, see the point of these functions if (as seems to be the case) they will not allow another cell to be referenced.

  I want to do a SUMIFS with match being the first four characters of another cell data. I can't find any way to do it without manually copying the first four characters in another cell.

  If I use only LEFT like this:

  LEFT ('ABCD', 3) to derive 'ABC '.

  so why would just enter ABC in the first place? But that's what show examples and any attempt to do what I really want

  that is LEFT (F19: 3)

  causes a syntax error.

  I believe that I'm missing something really stupid, but I'm darn if I can see it.

  Hi jon,

  LEFT (F19: 3)

  causes a syntax error.

  Try a comma in place of the colon

  

  = LEFT(B2,3)

  It's your area used for the decimal point. If you use the comma for decimals, use a semicolon in the formula, = LEFT(B2;3)

  Kind regards

  Ian.

• iTunes radio disappeared off the coast of the apple tv...

  no idea why iTunes radio disappeared from the apple tv? Tried to restart. also tried a reset. I'm subscribed to apple music so I don't see the problem.

  What version of Apple TV? If I understand correctly iTunes Radio is now only available with a subscription to Apple's music and requires Apple TV 4, an iOS device running iOS 9 or later version or on a computer running iTunes 12.2 or later. You can stream to Apple TV from a computer or iOS device.

  TT2

• Re: Satellite U500-115 - problem with the bluetooth mouse

  Hello everyone,

  I use a bluetooth mouse Saitek mouse with my Satellite U500-115 (OS: windows 7) and a have a real problem that is boring:

  Every time that I do not use the mouse for 10 or 20 seconds the pilot (or what ever) rocking in a kind of 'sleep', and it can take up to 1 minute until the mouse is available again. It is defenitely is not a mouse problem. I tried the mouse with a laptop LG and a windows xp sytem and it worked perfectly.

  I tried the following:

  1 put in place the current on the site of Toshiba bluetooth stack--> having not caused no difference in behavior.
  2 put the mode to 'Full Power' energy saving--> that seemed to have some positive effect, but not always. Sometimes the time until the sleep mode begins seems to be a little more but not always. In the "Full power" the mouse seems to go back a little more quickly when he woke from the mode "standby mode".

  Test: as I wrote this text, the mouse driver began the "sleep mode", now I'll move the mouse and take the time needed until the mouse will respond again a moment):
  45 seconds

  Is it possible to put the bluetooth HID in some sort of "permanent way"? At least the touchpad also reacts independable mode of energy of the laptop; This is why I think that it should be possible to use a bluetooth HID in the same way.

  Thanks for any help!

  Michael

  Hello

  Go to Device Manager, click Bluetooth radios and choose the generic bluetooth adapter. Then, right-click and select power management properties, umark, allow the computer to turn off this device to save power and press Ok.

  I don't have a bluetooth mouse, so I can't check if works. Just assume...

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• Problems with the WEB BROWSER blackBerry Smartphones, use not wifi network to open some Web sites

  Hello I'm owner of BB BOLD 9900 OS 7.1... for the last two days I am facing a pretty annoying problem with the BB browser.

  It means not affects the device... it just annoys me.

  When I TURN ON my WiFi on my BB with the network carrier Sim already homepage active who has a Active on it and open the web browser BB, according to the website on which I open the web browser chooses between the internet Wi - fi OR internet BIS carrier which is weird. BECAUSE a default if the wifi is enabled, then the web browser MUST use internet wifi network carrier for navigation. YOU TUBE, FB and TWITTER.com all use my carrier netwrok to open bt soon I open BBC.com or CNN or any other site the wifi symbol appears on the right side and so it uses the wifi network... and disappears when I opened THE 3 SITES you tube FB n twitter.

  My knowledge is that when you activate THE wifi network, the WEB browser is intended to USE the wireless internet, NOT the internet carrier

  The next time I switchd off the the carrier signal, and then Turned ON one internet WI - FI and then opened the web browser of BB. so now all the opend website with wifi internet bt as soon as I open YOU TUBE or FB or TWITTER.com it post a comment... .that cannot visit the web page when the carrier is off. Please turn on the radio n try again... I mean IT SHOULD OPEN with internet wifi? WHY do network carrier sim to open the web page?

  I have checkd my browser settings and they are default and also my wifi settings I have reset the... the problem still persists?

  any idea wats going on?

  Please help is needed I'm annoyed about this problem...

  Thank you

  MR. KIWI... Good news... .i went to my carrier service center... Solvedo Problemo!

  Go to your service books and remove directories of service WAP browser in all directories of service WAP 3 I don't know the exact name, but all are related to the browser... WAP config something like dat... Just remove dem... .and HARD restart your fone... and try to use only wifi on your device with your carrier network off...

  mine worked... Let me know on urs... so now, the browser uses my wifi instead of my network provider when both are running...

• problems of the shadow to my text

  My problem is to change in my MUSE text a shadow.

  It works for me for executives when they are filled with color. not on my text. Very often, I saw the tutorial and pay attention to details. Sorry for my text no shadow is possible. In the tutorial, it is very easy. are not only to afford radio buttons for the shadow. The text block is selected here. Who can help me or has a similar problem. Responses also as in German.

  Could you please help me with the tutorial you're talking about?

  Kind regards

  Akshay

• Problems with the dash invite you - 11.1.1.6 on Win 2008 64 bit

  Hi, I'm just curious to know if anyone who is using the / tests 11.1.1.6 on a 64-bit environment Windows 2008 is problems with the dashboard of the guests.
  
  I see the questions where the guests of dashboard are appearing with a NULL option - i.e. If a dimension has values A, B and C, I see the prompt appears as:
  
  NULL VALUE
  A
  B
  C
  
  There are NO NULL values in the data, and I see that the related query returns only 3 rows. It feels like something is broken with 11.1.1.6, but just curious to know if other people see it.
  
  BTW, this happens with all types of guests - check boxes, radio buttons, pick lists, etc. But strangely, it does not occur with the data of 'sound' - don't know if it's because it's from XML instead of the database?
  
  THX,
  Scott

  Just because I'm also curious.

  In the physical column from the physical layer, the NULL checkbox is checked?

  See you soon
  Nico

• Problems with the script to output event

  In fact I don't know if I have a problem with the Exit event or if there is something wrong with my script syntax... The output of a field event, I check if the field is empty or not and check a flag I put in place.

  The first if statement works - if I get back a value in the field, everything goes as planned. If I delete the value of the field, nothing happens.

  //if field has a value hide subSection04
  if (!(this.rawValue == null || this.rawValue.length == 0))
  {
       subSections.subSection04.presence = "hidden";
  }
  
  //if field is empty and flag equals true show subSection04
  else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == true))
  {
       subSections.subSection04.presence = "visible";
  }
  
  //if field is empty and flag equals false hide subSection04
  else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == false))
  {
       subSections.subSection04.presence = "hidden";
  }
  

  There are a few groups radio button that also control this behavior, they are all inter relate. So I tried also triggers the Click event of a radiobutton Group (which resembles the value in this field) out of this area, but that doesn't seem to work.

  Hi Jono,

  Your expression subFlags.Commercial.rawValue is true compares a String data type with a Boolean data type.

  Edit the expression as subFlags.Commercial.rawValue is 'true'

  I hope that this should work for you.

  Your code should look like

  //if field has a value hide subSection04
  if (!(this.rawValue == null || this.rawValue.length == 0))
  {
       subSections.subSection04.presence = "hidden";
  }
  
  //if field is empty and flag equals true show subSection04
  else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == "true"))
  {
       subSections.subSection04.presence = "visible";
  }
  
  //if field is empty and flag equals false hide subSection04
  else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == "false"))
  {
       subSections.subSection04.presence = "hidden";
  }
  

  Nith

• Since my 10.0.2 upgrade on my iPhone 5 my Wifi doesn't connect anywhere except home! This has never been a problem in the past I have connected everywhere wherever I was going to automatically! Is - this rare?

  Since my upgrade to 10.0.2 on my iPhone 5 my phone only connects to Wifi when I'm at home (cancelling the purpose of a MOBILE phone). This was never a problem in the past a my phone automatically and I received and could send emails, messages and use messenger etc automatically. Is - this rare?

  Hi John,.

  Please visit Apple support communities.

  I see that your iPhone 5 is not connect to other Wi - Fi networks after update to iOS 10. We offer troubleshooting tips.

  Since your wireless network is working, but you cannot connect to other networks, start with the next step in If your iPhone, iPad or iPod touch connects to a Wi-Fi network:
  
  

  Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  Sincerely.

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Add face problems - adjust the framework

  I have problems with the section "add a face" on iPhoto. The frame that appears often will not drag to make the image smaller, so that several people appear in the thumbnail instead of one of the faces that I want to identify. (Sometimes it works.) Do you have a suggestion on how to solve this problem?

  I use iPhoto 11', Version 9.4.3 on OS X, Version 10.8.5.

  Thank you.

  Try restarting iPhoto, as appropriate.

  Are very small photos, so that there are not enough pixels for a face frame?