FMC will recognize not update version 6.0.1 - 1214

Hi all

In light of reviews cisco-sa-20160330-fp (CVE-2016-1345), an attempt to upgrade 6.0.1 build CME - 1213 build 6.0.1 - 1214 is not recognized.

First attempt was to let FMC detect/download the update, but this resulted in the following message if poster "no new update currently available."

Second attempt involved manually download the update (6.0.1 - Sourcefire_3D_Defense_Center_S3_Upgrade - 1214.sh) file of the site Web of Cisco and the Uploader on CMF and then try to install it. This resulted in the following message not "valid devices available for Sourcefire Defense Center S3 upgrade 6.0.1 3D - 1214." This update is intended for software versions higher or equal to 6.0.0 and less 6.0.1 - 1214. »

This updated version 6.0.1 - 1214 is required to install the recent hotfix (Sourcefire_3D_Defense_Center_S3_Hotfix - 6.0.1.1 - 4. short), as shown in the download software page.

Someone facing similar problems? All possible solutions?

Thank you.

MP

Looks like they took this package on the download site.

The fix for the CMF is however is displayed with a date of April 1, 2016:

https://software.Cisco.com/download/release.html?mdfid=286259687&RelType...

I was able to download and install successfully on my 6.0.1 - 1213 version virtual CMF.

Tags: Cisco Security

Similar Questions

  • Update Windows in Windows 7 will be not updated. Error code 80244008. Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

    Update Windows in Windows 7 will be not updated.

    Error code 80244008.

    Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

    You may encounter temporary connection errors [for example, 0 x 80244008] when you use Windows Update or Microsoft Update to install updates
    http://support.Microsoft.com/kb/836941

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

    I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

    Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

    About to panic. Could use some real help on this and not only refers to

    http://support.Microsoft.com/kb/836941

    The computer is a Dell Optiplex GX280

    What I installed is the chipset & drivers for the controller of the motherboard & ethernet.

    Internet works fine on the device, I am writing to you from him.

    Also, tried installing IE8 on one computer and run windows update, same error.

    I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

    Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

    About to panic. Could use some real help on this and not only refers to
    http://support.Microsoft.com/kb/836941

    The computer is a Dell Optiplex GX280

    What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
    Internet works fine on the device, I am writing to you from him.

    Also, tried installing IE8 on one computer and run windows update, same error.

    Relax and breathe.

    FIRST: Uninstall IE8 and IE7 if they are installed.  Back to all the way back to IE6.  You want other patches before you get those.  Reboot after doing this.

    You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

    Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

    Install it.

    Then restart at least a couple of times for a few minutes between each restart.

    Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

    Install it.

    Then restart at least a couple of times for a few minutes between each restart.

    Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

    Install it.

    Reset.

    Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

    Back - let everyone know if it worked for you.

  • Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates

    Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates.  He worked for years until now.

    How to fix?

    Thank you

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

  • DW 6 Version 12.0 will be not updated to version 12.03

    I recently installed DW 6 version 12.0 and I checked the updates, the app said there was not.

    But I found several on the site especially a 12.03 updated.

    Setup runs, said he installed the update, but the splash screen still says version 12.0.

    I spoke with a technical support online, but since I was a customer of "volume" they tell me I have to call and PAY!

    I bought this version two months ago and I have to pay! ???

    Can someone suggest a reason why is not up-to-date on my Mac Pro running Mac OS Mavericks?

    Or suggest a solution?

    Thank you

    Hello Richard,.

    You use a Dreamweaver update version.  You can check yourself.

    Please check this screenshot.

    Hope it helps.

    Kind regards

    Devendra

  • iPad 9.7 Pro will be not updated to iOS 9.3.2

    I was required to make the update to the latest iOS (9.3.2) on my iPad 9.7 Pro because I heard there were problems.  I've just updated an iPad 2 Air without problems so decided to proceed with the update of Pro.

    iTunes does not recognize an update is available, even if the Pro displays a ready to install in settings > general > software update.  'Install' is available for 9.3.2 update.

    So, I tried, iPad Pro update while connected to WiFi but not office/iTunes.  When he goes to check the update, I have error saying "iPad not connected to internet", although it is well connected.

    No idea how to get around this problem?

    THX

    Delete the downloaded backup. One of my friends says that the 9.3.2 update has been pulled for the Pro.

    Barry

  • HP Pavilion p6-2133w: graphics card will be not updated of the drivers

    My Amd Radeon HD 6530d will not update the drivers I have tried everything to update the drivers from 15.201.1151.0 to Crimson Edition Beta 16.2.1 any help will be appreciated

    @drago72, welcome to the forum.

    Normally, the drivers other those provided by HP will not work with their motheboards.  I suggest you go to Device Manager / graphics cards / right click on your video card / select Update driver software / search automatically for updated driver software.  If there is an updated driver, it will be found and installed.  If this is not the case, he will tell you that it is up-to-date.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Firefox 4 will be not updated to firefox 5

    Hello

    I have 2 PC, both very similar set up.
    1 PC: that I am on, is the version 4.0.1
    2nd PC: version 5.0
    Both have gotten to these steps via update through the "Check for Updates". Problem is 1 PC says it is up-to-date. So I'm confused and I was wondering why 1 PC does not update?

    If there is any other information needed, please let me know.
    Thank you!

    Firefox 5 is without doubt a 5.0 (beta) version b1.

    Have you ever install a version of Firefox 4 beta or release candidate?

    It is possible that you are still on the beta channel.

    You can check pref app.update.channel on the subject: config page.

    If the value of this pref is beta so it is best to download and install the full version of Firefox 4, or edit the file \defaults\pref\channel-prefs.js in the folder of installation of Firefox 4 and change the line to:

    pref("app.update.channel", "release");
  • MAIN titles, a gadget for Windows Vista availbale, will be not updated

    My MSNBC title, feed, an available Windows Vista Gadget, did not update itself with the titles of all day for about 10 days.

    How can I fix this and restore my daily headlines of food?

    Hello bob1063,

    Thank you for using the Microsoft Windows Vista Forums.

    Sorry, you have a problem with that.  I suggest trying to uninstall this gadget and then reinstall.  If you open the sidebar click on the (+) sign add a gadget at the top.  Then right-click on this gadget and select Delete.  You can then search gadget to reinstall.

    Please let us know status.  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

    Windows colleagues for support.

    My windows install/windows update is broken; There will not be security critical update, installers fail with the error

    code 1, indicating a problem with language packs; I use widows 7 pro for software development.

    Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

    More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

    Hand, install the update package out of work.

    Your opinion is welcome. I have

    Hey Hey Hey Doc K whadu say?

    I solved my problem;

    the problem was owner and permission on my programs, all users, the program data and my programs (86).

    As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

    What have I done? I took possession of the special directories above from "TrustedInstaller".

    Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

    -What happened? Do you have a trusted Installer get stuck Mid-install?

    I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

    USER, AUTHENTICATED USER. I was perhaps too broad.

    I took possession, and then all of the repressed, updates windows are presented themselves to install,.

    and I expect /VERIFYNOW SFC before as I mark this as running.

    I'm fairly certain VS2008 and VS2010 now repair and install.

    Hmmm... always to see funny error message in SFC...

    We need a tool to give an overview of a directory tree ownership and permissions.

    dB

    Hey Hey Hey Doc K whadu say?

  • Photoshop will be not updated of 2015.1 (stays on 2015.0 version)

    Creative cloud said that Photoshop is up-to-date even if 2015.0 version.

    I tried signing off CC and uninstalling Photoshop, Lightroom, and CC Desktop, restart and then reinstall all of Adobe.com, but Photoshop is still the previous version.

    Lightroom updated to the latest version, but I can't seem to get the 2015.1 Photoshop version. I use Windows Pro 8.1.

    Any help would be appreciated.

    Thank you

    Matt

    Hi Malindberg,

    Could you please try to update Photoshop manually from the link below:

    Update Adobe Photoshop

    Please let us know if it helps.

    Concerning

    Sarika

  • iPad will be not updated to iOS 10

    My iPad will not recognize iOS 10.  I've updated my two iPhones (6) easily and successfully.  However, when I click on "Check for Updates" on my iPad, I get a message that the 9.3.5 version is the "current version".  It does not produce an error message.  It's an iPad 3.  I never had problems before update.  Recently, I did a restore of backup because he refused to play the video on one of my apps.  Restoring corrects this problem, but did not affect my inability to update the iOS.  I tried to install wireless and wired with iTunes on two different computers.  He said still 9.3.5 is the latest version.  I stopped and restarted several times iPad.  No luck.  I tried on several different networks.  No luck.

    This is because the iPad 3rd generation don't is not supported in iOS 10 (http://www.apple.com/ios/ios-10/).  9.3.5 IOS is the latest version of iOS for your iPad.

  • HP Envy Phoenix h9 - 1420t: Support Assistant will be not updated

    Computer model: HP Envy Phoenix h9 - 1420t

    OS: Win 8.1 Pro 64-bit

    HP Support Assistant

    Version: 8.3.27.17

    Framework: 12.5.26.37

    Since the upgrade to the latest version of the Support Assistant, I am unable to check the updates. The program has successfully completed phase "connect to HP servers", but then fails (x-watch gray instead of green check mark) to complete the remaining steps:

    • Download messages and updates of definition
    • Gathering configuration information
    • Scan your system
    • Preparation of the list of actions

    Any suggestions on arises at work?

    The steps I've tried: uninstallation with Revouninstaller, resettlement, reset

    @troubleshoot411, welcome to the forum.

    I agree with using Revo.  This is my go to app for malware.  When you used Revo, you use the advanced option?  This will not only remove the program from the HARD disk, but it removes remnants of the BIOS.  If this is not the case, this could be the problem.  I suggest to try the advanced option to remove HPSA and shut down the computer.  Then, start and reinstall HPSA here.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Pavilion g7-1269nr: Intel Chipset will be not updated.

    I always updated operating system and the programs, but never update of drivers. I didn't updated drivers, I thought, well I never think, just never heard of updating drivers, so never have.  Right now, I've updated all the drivers I think, will explain.

    I have the Raptr desktop application, and it checks your GPU for updates.

    It is said - driver Intel GPU (9.17.10.3347) update available

    So, I clicked on the button (the driver update), and it took me to Intel.com for I can download the "Intel Driver Update Utility.

    I downloaded and scanned my PC. The pilots, she showed was the GPU and Chipset.

    Under GPU, it says:

    A custom computer manufacturer driver is installed on your computer. The Intel Driver Update utility is not able to update the driver.< meaning="" there="" is="" one,="" and="" intel="" can't="" update="">

    Raptr and The Intel Driver Update Utility both suggest that I need a GPU update. When I go on the site of HP, scan the PC and watch the updates available under driver-graphics and there were 3; Intel, AMD and Nvidia. So, I downloaded the Intel one and check my PC with the Intel driver update utility. He said the same thing, like Raptr.

    Under Chipset, it says:

    Version of Intel Chipset Device Software (INF Update Utility-(EXE only) - installed 9.2.0.1011, latest version - 10.0.27

    So, I download, then installed. There as well.

    I don't know if it's important, but in my opinion, it might be.

    I bought my PC to Aaron, and he had stuff all this Aaron on him and all the apps pesky that HP puts on the PC there are.

    So, I came here to see what I could do about it. I didn't know that it's just that I bought a pc and it came with tons of additions that I don't want. I wanted to just simple Windows 7 operating system. I think that the person who helped me was named Sheryl, not for sure. But she suggested a. ISO. So I downloaded and installed. Entered my key for Windows authenticate and was in business.

    Since I installed the. ISO, under Device Manager, there is a unit named "Teredo Tunneling Pseudo-Interface and can not find the program for her." He has one of those yellow triangle with an exclamation mark inside.

    Any help would be greatly appreciated

    Hello

    Please pass the link below, download them and install the Intel® driver update utility, it automatically identify and find drivers for your device.

    http://www.Intel.com/p/en_US/support/detect

    Intel (r) Driver Update Utility download version allows users to scan their computing devices for the latest updated drivers available from Intel.

    Supported with release products: graphics, chipset (Chipset INF), wireless, the mothers Intel (r), BUD Intel (r)

    If above utility does not work, here is the link for the support and drivers for you unit. Please visit the link and download the necessary drivers.

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G7-1200-notebook-PC-series/5145712/model/5177934#Z7_3054ICK0KGTE30AQO5O3KA30R1

    Please go through the link below on how to manually install a driver for Microsoft Windows 7 *.

     

    http://www.Intel.com/support/graphics/sb/CS-033915.htm

     

     

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click the "Thumbs up" button on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

     

     

  • Computer doesn't recognize not update Service Pack 1

    Original title: you read these questions? the responses I've read so far say NO

    The question I ask has been requested several times, but the responses I've seen do not address the issue, just to give instructions on how to install SP1, but not how to fix the problem by heart.  SP1 has been installed on several occasions:

    10 times with success since 14/07/2015 through today 06 19, 2015, [update history] and the computer does not recognize always day and it says I need.  It's why I can't do SP2 either.  The computer properties does not mention MS

    Last year, I called and the technology did and the same results.  Please answer this question!   Thank you

    The question I ask has been requested several times, but the answers I've seen do not address the issue, just to give instructions by heart on how to install SP1, but not how to fix the problem.  SP1 has been installed on several occasions:

    10 times with success since 14/07/2015 through today 06 19, 2015, [update history] and the computer does not recognize always day and it says I need.  It's why I can't do SP2 either.  The computer properties does not mention MS

    Last year, I called and the technology did and the same results.  Please answer this question!   Thank you

    Hello

    We read the questions and try to give solutions to the best of our ability, depending on the quality of the information you provide on the problem.

    We do not work for Microsoft.

    We are mainly volunteers here, just like you, computer users who give free advice from other users in our own spare time.

    @@@@@@@@@@@@@@@@@@@@@@@@@@

    Unless you have the SP1 and SP2 installed, there is no support for Vista; Microsoft support ended.

    You say that you do not have SP1 installed, then of course we give you instructions on how to install it.

    And when you post here complain about anything doesn't work for you, publish a list of the things you have already tried.

    It is not installed if it does not appear under properties

    Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

    It will also tell you which SP you have installed (apparently without SP).

    Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

    Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

    Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

    Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

    Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

    This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

    http://support.Microsoft.com/kb/947366

    See you soon.

Maybe you are looking for