FN keys do not work on my Satellite Pro A300

Similar Questions

• Function keys do not work on my Satellite Pro L series

  I recently bought TuneUp Utilities 2012 to speed up my laptop and arrested a number of programs, including some of Toshiba which were included with my current laptop.

  Problem is that the FN key is no longer made up a screen what do my F keys, and the F keys do not work (so I can't hibernate with F4).

  Does anyone know what utility is responsible for the F keys?
  Thank you

  Fn keys are controlled by the Support of Flash memory card utility.
  The Support of Flash memory card utility Msconfig must be activated!

  In addition the utility of the Flash card is located in all programs-> Toshiba
  Here, you can restart this tool.

• Re: Fn key does not work on the Satellite Pro C660 2TQ

  Hello

  I bought laptop Satellite Pro C660 - 2TQ PSC0RE - 01801QGR 2 days ago and found the Fn key does not.
  Someone help me to activate it?

  Hello

  Select all programs-> Toshiba-> Flash cards, and then restart this utility.
  Now if you press Fn + F8, you should be able to turn on or turn off the WiFi.
  The FN + F9 active needs or disable the touchpad.

• FN key does not work on my Satellite L505D-S6965

  Hello

  FN key does not work on my Satellite L505D-S6965. I have Windows 7. What should I do?

  Try please reinstall extra package from Toshiba.

• My shift key does not work on my MacBook Pro

  My shift key does not work on my MacBook Pro. Can I use capital letters but only if I click on change and it's annoying. When I click on the passage icon shift comes at the top right of my screen to show its on but when I click on the lock button nothing happens as it used to glow green when I clicked it. Before someone says go to the system preferences and go to the modifier keys and restore them or make sure caps lock shift is on lock shift, I've tried that already, I looked it upward and found nothing similar. Help ASAP would be appreciated because it is really annoying

  Hello Gracepullan1,

  I understand that shift key of your MacBook Pro does not respond as before. Fortunately the steps below can help to restore the functionality of the SHIFT key on your Mac.

  1. In the Apple menu, choose System Preferences.
  2. On the view menu, choose the speech.
  3. Click on the text to Speech tab.
  4. If "Text Speak selected when you press the button" is enabled, the key or combination of keys set to read the text cannot be used for other purposes, or used for typing text - click on set the key and replace it with a less commonly used key combination (try using the modifier such as SHIFT keys, command) Option and control). Or disable the option "Read the selected text when the key is pressed".
  5. Click the accessibility pane or universal access in system preferences, and then click the keyboard tab.
  6. Make sure the slow keys is off. With slow keys on, you must press a key for a longer period of time so he can be recognized.
  7. In the accessibility pane or universal access, click the mouse and make sure mouse keys is turned off. With the active mouse buttons, you cannot use the numeric keypad to enter numbers - instead the keypad moves the pointer (cursor). (There is an option to activate the MouseKeys to five presses down option, you can disable this option to avoid accidentally activate it.) If the mouse keys is enabled and you are using a keyboard without the numeric keypad or Num Lock function, see Impossible to type while mouse keys is enabled in Mac OS X.
  8. If the function keys on the top row of the keyboard do not work as expected, see Mac OS x: how to change the behavior of the function keys.
  9. If the problem persists, use the keyboard Viewer to help isolate the problem:
     1. Click the component language & text (Mac OS X v10.6) or international (Mac OS X 10.5.8 or earlier) in system preferences.
     2. Click on the tab Input Sources (or tab Menu entry under Mac OS X 10.5.8 or earlier version).
     3. Click on the keyboard and the characters 'On' box Viewer checkbox to select (click on the viewer of keyboard "On" checkbox under Mac OS X 10.5.8 or earlier).
     4. In the entry menu (flag), choose Show Keyboard Viewer.

  
  

• If the keyboard is connected and detected by OS X, the keys you type will highlight in the keyboard Viewer window. Open TextEdit (or any text application) and try to type something using the keys that failed before to see if they highlight in the keyboard Viewer.
• Start up from the Mac OS X installation disc, choose Terminal from the utilities menu and test buttons that did not previously.  If the keys work while started from the install disc, the keyboard works correctly.  How to solve a problem of software allows to isolate the software problem that may be causing the keys to not answer.

One or more keys on the keyboard do not respond
https://support.Apple.com/en-us/HT203162

Sincerely

• Re: FN brightness key does not work on my Satellite L350

  Hello, I have a Toshiba Satellite L350 - 20 portable computer G, I went down to windows XP

  Screen, sound, WIFI all work great, but the Fn brightness key does not work, anyone know the solution to my problem

  Thank you

  You have installed the clean version of Windows XP Home edition?
  Have you installed all the drivers available, tools and utilities?

• FN keys do not work on my Satellite A500

  I have the Satellite A500-1F4 and FN keys do not work please help me

  Hello

  Since when did you notice this?
  Try to back up OS to an earlier time using System Restore tool just to see if this will help.

  If this is not the case, try to reinstall Toshiba Value added Package.
  This package contains several tools and utilities, and one of them is Toshiba Flash cards utility.

• FN key does not work on the satellite L745

  yesterday, I uninstall almost all toshiba prog and then my FN key does not work!
  Please help me this laptop is only a week

  Hello

  Install the VAP (value added package) and reboot the laptop.

  Then install the Support Flash Card utility and reboot once more.
  Then test the Fn keys.

  The buttons are controlled by Flash cards, so you should be able to use the buttons after a new installation of this app.

• FN keys do not work on my Satellite A350-02 t

  Recently, I pointed out my Fn key does not work, if I press any (F1 - F12) nothing happens, but I don't care, my wireless was pick up automatically. But not today. My doctor of connectivity "(votre wireless dans pas-touche Fn8) answer Yes, I would, but does not work."

  I tried to restore a month ago, but did not help. Help, please! And if possible simple way, I thank you in advance.

  I put t know which model of laptop you have and what operating system you use, but try please reinstall Toshiba value added package.

  You can find it on the download page of Toshiba under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  If you need assistance you are welcome.

• Shortcut keys do not work on my Satellite L550D - 136 (PSLXSE)

  Hello

  I have a Toshiba Satellite L550D - 136 PSLXSE

  I wanted to work with the keys Fn + f (f1 etc.) numbers

  But they do not work. I've already updated my Windown and I already updated the package of service evaluated.

  What can I do, they work?

  By the way: the keys have no mechanical defects.

  Thank you

  Hello guys

  I put t really know what you are doing with your laptops. Each new laptop comes with the pre-installed operating system clean (recovery image) and FN (Flash cards) keys SHOULD work correctly.
  Later, when you install your own stuff or configure OS, something can go wrong, and cards flash may stop working. On this virtual path, it is not easy to say what may be the problem.

  Of course, you can try to fix this resettlement package added. This software contains cards Flash utility and it should work again. Before install VAP remove preinstalled version and restart your laptop.
  I put t know which type of installation of Windows you have installed, but anything is possible may be responsible for the non working flash cards.

  In the end, if you will not be able to fix it, to save all your data and install recovery disk HARD recovery plant using image - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  Wth all factory settings will be OK again.

• Some keyboard keys do not work on my Satellite L300D

  Hello

  I have the Satellite L300D-242, keyboard key 6-7-R-H-B left and right arrow not working not not on Win 7 32 Bit OS. his job very well if I try the keyboard external usb.
  My question is if I buy the new keyboard problem will be fix or it's something to do with the motherboard?

  Thank you

  Hello

  If everything is ok with the external keyboard, it seems that a few keys on the internal keyboard are faulty. I agree with Timox and swap the keyboard internal which is very cheap and can be done in 10 minutes.

  Do you know where you can order spare parts?
  You can do this if you contact an authorized service provider. You can find a list of the guys here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Function keys do not work on my Satellite C855 1GN

  I have a Toshiba Satellite C855-1GN, I received as a gift for Christmas.

  I just have it for all my college work, but I noticed my function keys changed round.
  Usually when I hold the FN, is for the f1 to f12 keys but suddenly it's the other way around and that's what the key is for example (brightness, etc.).

  Now it seems simple, but I found that not the case...

  I was in the BIOS and I checked the settings and changed them several times, but still the value of special function parameters, it does not work.

  I've been on the HWsetup and checked, but even once, even the special function value, it fails to work.
  I tried various keyboard shortcuts suggested by people because the key fn is 'locked' or however they described, but still I can't understand what has happened and how to restore it.

  I can't stand my laptop being that I just got used to it and use the other keys MUCH more than the F-keys.
  Please can someone help me?

  Hello

  This information could help you?
  + * Function key changes in Satellite and Qosmio 800 series * +.
  http://APS2.toshiba-tro.de/KB0/TSB2903E00000R01.htm

  Please give some feedback

• Many combinations of Fn keys do not work on my Satellite L10

  Hi, I had a portable Satellite L10, used with a lot of software. However, many of the key with the Fn key combinations do not work. FN more Esc, F6 F12 and the arrows above, everything works, but others that I can't do. Is it possible that they have somehow been disabled? If so, how can they be enabled again?

  Thanks in advance for your suggestions.

  Hello

  Please see the following [SITE | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp], choose the machine that you have and the operating system that is installed, download all the drivers and tools and install them, no matter if they´re already installed or not.

  Eventually the FN keys should work again. If not, back up all your important data from the HARD disk and perform a reinstallation of your operating system with the embedded restore CD. The installation goes automatically, so Don t be worried.
  After recovering from the machine, the keys MUST work.

  Greetings

• USB 3.0 does not work on my Satellite Pro L50

  Hello boffins.

  I have a problem with the driver for the Intel USB 3.0 eXtensible host controller on my L50 (running Win7 64 bit).

  I recently took my L50 Pro Satelite (PSKK3A-001001) to the repair shop because the blue ports were not running at speeds of USB 3.0 when I plugged a USB 3.0 compatible device (a WD 1 TB HARD drive). When I looked in the device tab "Display connection" Manager, HARD drive showed as connected to the ordinary C220 USB hub which is for USB.2.0. USB 3.0 eXtensible Host Controller has been inactive.

  The technician in the repair shop said:

  + I tested your machine with a new installation of Windows 8 and have been able to achieve speeds to 180 MB/s of my FlashDrive USB 3.0 without problem, which indicates that it is a matter of faulty software. We can improve your Windows 8 machine free of charge if you prefer, but I'm unable to solve the problem in Windows 7. From what I can tell, and what you have experienced, no published 3.0 for Windows 7 USB drivers can recognize the 3 USB ports installed as a USB 3 connection. If you are wanting to stick with Windows 7, I can't guarantee that you will reach speeds of USB 3.0 by using these ports. +

  It's not really good enough, Toshiba. Now, I bought this machine specifically with pre-installed Win7 (because Win8 is rubbish) that I wanted a machine Win7, including USB 3.0 ports. This machine has been published as such, having Win7 installed with 2 x USB 3.0 ports and 1 x USB 2.0. This is confirmed by the page of the specifications of Toshiba here: [http://www.mytoshiba.co.nz/support/computers/satellite/pro/l50/pskk3a-001001/specifications].

  So, my question is this: why this machine is the drivers needed to run it as advertised (i.e. under Win7 with 2 ports USB 3.0 x and 1 x USB 2.0) and if there are drivers for this device available, where are they? I tried and tried the repairman (I guess) but I'm still without a driver to run my USB 3.0 clocked ports. I tried age for the files to be transferred between pending devices.

  Maybe someone can help me find a driver that works or Toshiba will clean up their act and produce a.

  But you have installed Intel USB3.0 driver 2.0.0.102 version, right?

• Web Cam does not work on my Satellite Pro C850-10 t

  Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem

  What should I do?
  Thanks in advance :D

  Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
  Webcam is entered correctly in the Device Manager?