folder with 20 000 + jpg does not display 500, Windows explore announcement that all 20,000 are there when re-copying

I have a folder with 20 000 + jpg in them, and Windows Explorer WILL DO show that nearly 500 points! and if I try to copy the 20 000 jpg files that I saved on a flash dive, Windows Explorer said that all of the 20,000 + is here! (he asks me if I want to replace each of the files jpg 20 000 + when I copy them on) the status bar says 503 items in the folder and I HAD 20 000 + AND WINDOWS THINK all 20,000 + ARE THERE TRYING to COPY BACK! How can I get Windows Explorer to display all 20,000 +? Apparently, they ARE there, but the Windows Explorer DO NOT display them!

Try to start, run, type: diskmgmt.msc

Msc, L.click the disk, go to actions, all, search & select 'make active '.

close the msc. Try again youre copying

Tags: Windows

Similar Questions

  • Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.

    Windows displays the device works correctly.  However, the device does not appear in windows Explorer. also, I can not format disks.

    What should I do next

    Hello

    1. Are you referring to the NEC USB Floppy Driver?
    2. You try to format floppy disks?
    3. Was - this earlier work, if so, did the chnages on the computer before this problem?

    If it worked, I suggest the following methods and check the status of the issue.

    Method 1:

    Open the hardware and devices troubleshooter.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2:

    Update a hardware driver that is not working properly.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • The NEC uf000x diskette device is showing to work correctly. However, it does not show in windows Explorer. I can't read any disks or even format.

    The NEC uf000x diskette device is showing to work correctly. However, it does not show in windows Explorer. I can't read any disks or even

    format. What is my next step

    Check Device Manager to see if it appears.  You may need to install a driver for it.  If so, you should be able to get from the NEC web site.

    Good luck.

  • You try to view medical records with CDVIEWER. It does not load on Windows 7 64 bit. Need help.

    I'm looking for some medical records using Windows 7 Home Premium 64. Records are on a CD that comes with the CD VIEWER integrated display the documents. However, it does not work on Windows 7. I opened enforcement administrator in compatibility mode checked and tried, 98 / Me, 2000, XP, and Vista modes but none of them works. Any suggestions?

    Tried to copy the cd image files in a directory of Documents and then open them with paint or photo look software (NB be sure to uncheck everything open allways with program xx)

  • a preparation free gata with GK Publications cd does not run on windows 7 Home Basic.

    A cd of free door preparation with GK Publications does not run on windows 7 Home Basic.

    I have buyed a book for the preparation of the door named GK Department with a cd inside, it includes the series of door documents test to practice. But it is to create an error message problem showing that Microsoft.jet.OLEDB.4.0' is not regestered on the local computer.    Please sort out the problem as soon as possible.

    Hi preyashi,

    Thanks for posting your question in the Microsoft community forum!

    I understand that you are having problems running a program from a CD on your computer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

    (1) did you make any changes before the show?

    (2) you are able to run the other Setup program on your computer?

    Senario 1:

    See if it is compatible with Windows 7.

    If this isn't the case, you could try installing in compatibility mode for Windows Vista or Windows XP.

    If the program is not compatible, then you try to install and run the program in compatibility mode.

    Use the following steps:

    (1) right click on the program.

    (2) click on Properties.

    (3) click on the tab compatibility.

    (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

    Check out the link here: make sure to run older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    If compatibility is not successful, then try and run the program compatibility problems:

    1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button.

    Then click on Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

    2. follow the instructions in the troubleshooting.

    If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

    Senario 2:

    The behavior you describe is expected if your application runs in 64-bit mode, all components that use must also be 64-bit. There is no 64-bit Jet OLE DB Provider, so that you get the message as described. You will receive a similar error when you try to connect to a database by using OLE DB or ODBC if there is no 64-bit of the specified OLE DB provider or ODBC driver version.

    This problem occurs only in applications that run in 64-bit mode. Compiling the application so that it works only in 32-bit mode is the current best solution.

    You may need to contact the manufacturer of the program to find out how to set the path target to x 86.

    More information

    32-bit and 64-bit Windows: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

    Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

  • Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

    The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

    We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

    The specifications of the laptop are:

    HP Pavilion dv7

    Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

    4 GB OF RAM

    64-bit Windows Vista

    Hello

    Check with HP Support, their online documentation and drivers, and their known forums
    questions.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • My DVD drive does not appear in Windows Explorer

    This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD.  No DVD, CD or even disks with files stored on them.
    When I open windows Explorer, the drive from DVD (e) is not even more appear.  I was wondering how to fix this.

    Hello

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • Under folder disappeared with the emails. E-mails can still be found with search option but does not display text

    A bunch of my subfolders to sort my email disappeared, which has been brought to my attention when TB tried to sort my mails and said that the subfolder does not exist. I've recreated the subfolders with the same name as before and when I entered the new subfolder I was surprised to see that all the past E-mail were in it. However, when I opened the email body of emails were empty. (I even tried to syntax highlighting for white text as suggested in the line, but nothing)

    I used the "search for emails"options to try to find, using the title of the emails as search parameter, that is to say "received for your PalPay payment" and the search results gave me the results of all the missing emails with the full text of each e-mail. " However, when I went into individual emails (or open emails as option in the list) the text was not yet there. It must be here somewhere because the search option is to find.

    I tried to delete the profile (global-messages - db.sqlite) in the hope that he would bring back the text but it did not work. Most of the emails that are empty is financial in nature and I would like to return.

    Help!

    Thank you, John Jaeger

    Thanks for trying. Cannot find missing files anywhere. Returned in time machine and pulled the 'old' if only lost a couple of weeks of mail. in these files.

    Thanks again

  • JDeveloper comes with 12 c BPM does not display the MDS configuration during application deployment window

    Hello!

    We have developed the ADF application using MDS. We mainly use it to set the configuration of BC ADF (am pool properties) when running in EM.

    When we deploy our application usually JDeveloper 12.1.3 to standalone WLS JDeveveloper shows "Oracle Deployment Configuration" window, where we can specify properties MDS: repository name and the name of the Partition.

    Deployment_configuration_window.jpeg

    If we deploy the same application to JDeveloper 12.1.3 shipped by BPM to the same autonomous WLS, Jdeveloper shows this window.

    Deploy goes without any additional question, but we can not access MDS for our application!

    EM, we cannot change configuration ADF BC during execution. Other features that require MDS, also does not work.

    In EM-> ApplicationDeployments-> our application-> MDS Configuration EM displays the following message: the SDM configuration information is not found. This application doesn't use MDS repository or repository MDS may not have been configured properly.

    MDS_Configutaion-page-in-EM.png

    So my question is: how to set MDS configuration in JDeveloper comes with BPM?

    Thank you

    Boris

    OK, I compared the EAR generated file in Jdeveloper ordinary with file EAR generated by JDeveloper comes with BPM.

    I found the difference in the ADF - config.xml.

    EAR usually has the following line:

    ===

    http://xmlns.Oracle.com/ADF/MDS/config "" >http://xmlns.oracle.com/mds/config "version ="11.1.1.000"> "

    ===

    JDeveloper comes with BPM EAR didn't.

    I added this line to adf - config.xml in my source project. Now BPM Jdeveloper show "Deployment of Oracle Configuration" window during the deployment process.

    And I am able to change the configuration of BC ADF in MS when running.

    Boris

  • CPU at 100% with the Task Manager does not display what makes

    I have a new computer, less than 2 months and it came with Windows 7. Last week, my computer went from the status fast trolling, does not without apparent cause. I'm not a computer expert, but I ran that several malware and virus scan does not. The Task Manager shows my CPU usage is at 100% but it only shows nothing running top 10 to 15%.

    I have an Acer Aspire 5517

    with and Athlolan processor TF-20

    3 GB of memory system 64-bit

    There are a variety of similar positions on the Internet that refer to this type of behavior, but not one that seems to be a guaranteed solution. A few success report by disabling the Windows Media Player Network Sharing Service, while others reduce the media files in folders that are monitored by WMP, etc..  You have a lot of media files?

  • The mouse cursor does not display in Windows Media Player

    When I start Media Player I don't see the cursor of the mouse to control anything. I use the Task Manager to close the windows media player.

    I suggest that you update mouse drivers to their latest version. Don't simply check Windows Update, but the Logitech site as well.

    If this does not help, then run the SFC scan once more with your installation of Vista DVD inserted in the computer. He is able to repair the missing and corrupt files then?

  • the problem with the wi - fi does not work on windows 8.1

    Hello dear forum users (sorry for the English, use a translator)

    I have a laptop HP Pavilion dv6-7055er, 8.1 Windows 64-bit

    Card Broadcom WiFi 802.11b/g/n 1 x 1 4313GN worked on windows 7, but fails on windows 8.1. Tried to find the driver on the broadcom , but not found. Device Manager indicates that the problem with a PCI device. Specifies no problems with the Wi - Fi adapter.

    What could be the cause and how to fix it? Thank you!

    It seems that your WIFI adapter is not supported by Windows 8.1

    There are a few options available.

    The first and simplest is to purchase a USB wifi adapter to plug into one of the USB ports on the laptop. I have a dual ASUS USB-AC56 band that meets the 802.11ac specification.

    The second option will be to take a look at the installed optional wifi adapters to see if they have Windows 8.1 supports, buy one to replace the Broadcom card installed with.

    Ok. The two following adapters are compatible with your laptop and Windows 8.1. They have a BIOS support.

    The Qualcomm Atheros AR9485

    The Intel Centrino Advanced - N 6230 WLAN module

  • the audio control panel does not appear on various websites which I am sure they are there. I see them in IE and chrome, but not in FF

    The audio control panel does not show simply. On this site, I should see the control panel. http://www.testplek.annemariebeeke.nl/huiswerkopdracht_week3_bonus.html.
    It does not show in the other browsers, other people can see it, but I can't.
    Even with these sites:
    http://www.jokevan.nl/HTML5/oef3-3.html
    http://kokenvoorpapegaaien.nl/Kellerhuis/oef3-3.html

    Reload Web pages, and ignore the cache.

    • Hold SHIFT and click reload.
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Cmd + Shift + R' (MAC)

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

    Original title:

    Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

    Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

    Hello

    You did changes to the computer, before the show?

    Solution A:

    For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

    Method 1:

    Check out the following link.

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

    http://support.Microsoft.com/kb/925196

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 how to back up and restore the registry in Windows

    Method 2:

    Connect the external hard drive on another USB port and check.

    Solution B:

    For the problem with the help and Support, check if the service is enabled.

    a. click Start, click run. In the Open box, type services.msc and press ENTER.

    b. right-click on the service called Help and Support , and then select Properties.

    c. under the general tab, set the type Startup to Automatic and click Start.

    d. close the services window and check for the issue.

  • Drive hard IDE does not appear in windows Explorer

    I have Windows 7 with two SATA drives. I also have an IDE drive and a dvd player connected to a single cable for IDE connection on the motherboard. One of the players SAT is the master. I have problems with the IDE hard drive I want to use as archive. It is connected to the end of the IDE cable as master, the DVD as slave connected to the middle connector on the cable. The BIOS detects the drive and the Device Manager but I can't in Windows Explorer, which means that I can't copy files to it and pick it up. Someone at - it ideas?

    Thank you

    Tony

    Original title: Explorer does not see drive?

    It has been used on another PC. Disk management idetifies just like a Maxtor N40p and ability, but nothing else. I tried using Seagate disk checker (Maxtor is now Seagate) and it doesn't have the tests, so I think it must be irreparable :-(

    Thanks anyway.

    Tony

Maybe you are looking for