Follow-up for RMA replacement problem

Similar Questions

• I can't well follow-up for the replacement of the screen

  I don't know what I'm doing wrong. I'm doing a replacement of the screen of an iPad, and I can't get good enough followed. I use Mocha AE to track the iPad and then pasted these attributes in a new solid layer, then put my video on the solid. But as you can see, my edges are everywhere. It makes me batty. Any help would be greatly appreciated.

  You must refine your track in mocha. You don't just have a pretty good track. This is typical for a compressed film, shutter problems and rolling motion blur. It can also occur if you have highlights on the surface you're trying to follow. Personally, I would add 4 grooves in the corners on the same layer, then add the surface and fine tune, do track in Mocha, then refine the audit trail all the latest images, then check it carefully in moka to make sure it is perfect, and then import the data into AE.

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  Problem Windows install

  When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  I looked at several forums and tried cleaning patches, etc they suggest.  I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)

  I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!)  Someone out there has a solution?

  Hello, Atwitsend...,

  Try to repair.
  Go into Add Remove Programs, then select Apple Software Update > change > repair.

  If this does not work, try to uninstall. .

  Remove and reinstall ITunes, Quicktime, and other software components
  http://support.Apple.com/kb/HT1923

  Download the iTunes Installer and save it on your desktop.

  http://www.Apple.com/iTunes/download/

  Try to install iTunes using the installer that you saved.

• L7590 The following printhead (s) has a problem: (part 1

  I started getting the following message: "the following printhead (s) has a problem: yellow/black [K/Y], magenta/cyan [M/C]»

  I was recently hurt of paper a little, jams with no ink on paper (all colors, even if I'm only gray printing). I carefully located and removed all the paper, including tiny specifications.

  Then printing began showing spots in particular parts of the page. Using a lint cloth and isopropyl carefully wiped food surfaces. I also deleted the print heads very carefully and delicately wiped away all the dirt. I did the same thing for the ink cartridges. All the cleaning was done with a lot of attention with touch. Initially, I got the above message for the black, but shortly, I received the message for the two print heads. (cont'd)

  Thank you, Rainbow 7000.

  I carefully studied the problem and come to the conclusion that the printhead is certainly well beyond resuscitation.

  The cost of the new leader, as well as a few other problems - the sheet feeder has stopped working altogether earlier and the paper feed has been less and less reliable insofar as it is a real nuisance - led me to search for a replacement. The very high cost of replacing the head and the fact that, in this country (Australia), it seems impossible to get any technical support after the warranty expired, led me to look elsewhere and I ended up buying a Brother J6910DW, who, in addition to all the things that HP could do, also manages A3, for about twice the price of a print head for the L7590. So far, it works beautifully, was a dream to set up and the same paper that was giving me all sorts of problem fed flawlessly. It's really good to be able to feed several sheets again. It is a pity bigggest I have now several authentic print cartridges I bought recently for HP ink cartridges. Genuine for the brother are also cheaper per page.

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• Looking for a replacement for iPhoto

  I am currently using iPhoto 9.6.1.  I have all my photos by folders, subfolders, albums.

  I have been unable to organize the new application 'Photos' in the same way, and the program just looks very difficult to use.

  I'm running an iMac 27 inches, unit end of 2009, with OS10.11.3.  iPhoto starts to act under this new OS.  I am looking for a replacement photo program that will allow me to maintain my current organization as way above.  I also want to keep additional features such as changing.  Faces is also nice, but could happen. Suggestions would be greatly appreciated!  Thanks in advance for any help available.

  You can still do with Photos.

  Moments in Photos are new events, i.e. groups of photos sorted by date of catch.

  When the iPhoto library has been migrated first to the pictures there is a folder created in the box titled iPhoto events and all migrated iPhoto events (which are now Moments) are represented by an album in this folder.

  

  Use the Command + Option + S key combination to open the sidebar if it is not already open.

  NOTE: it has been reported by several users that if the albums of the event are moved in the iPhoto Library folder in the sidebar, they disappear.  It is not widespread, but several users have reported this problem.  Therefore, if you want to if ensure that you keep these event albums do not transfer out of the iPhoto events folder.

  Is there a way to simulate events in pictures.

  When new photos are imported in the library of Photos, go to the smart album last import , select all the photos and use the file menu option ➙ New Album or use the key combination command + N.  Call it what you want.  It appears just above the folder to iPhoto events where you can drag it into the events in iPhoto folder

  When you click on the folder to iPhoto events, you will get a window simulated of iPhoto events.

  Albums and smart albums can be sorted by title, by Date, with the oldest first and by Date with the most recent first.

  You can create folders in the sidebar which contains other folders and albums.

  

• The following printhead (s) has a problem: yellow/black [K/Y].

  I bought 'HP OJ Pro L7380 AiO' on 12-06 - 2008 and it took out of the box on 12-08 - 2008, and when I tried to install it, the first time, I get the error:

  The following printhead (s) has a problem: yellow/black [K/Y].

  Edit (add this paragraph):
  (1.), I turned on the printer for the first time, and it was not connected to the computer.
  (2) this error on the printer screen after some initials self-tests & installation messages.
  (3.) I tried to remove & clean the black print head & putting back a few times, but it did not help.

  I used "the following printhead (s) has a problem" to search for information on the internet (Google) and found ONLY this phrase:
  The following printhead (s) has a problem: yellow/black [K/Y].
   
  This only means and confirms that the "Black" printhead has a problem and HP has done NOTHING to solve this problem. HP didn't even bother to warn / help buyers at the time of purchase.
   
  I called HP customer service and I was told to take the printer to service center. .. Out of the box and the service center! It's so frustrating!
   
  I lost the satisfaction of purchasing a new product!

  It's JUST that I buy a new printer, get out the box and have to take it to service center because it won't get installed?

  Message edited by angelique on 10/12/2008 02:41

  Since you have owned less than a week, can you not take her back to the store and exchange it?  If you bought it online, then a return period as well.  Or you can directly call HP and tell them you want to return if you have no way to take it back to the place of purchase.

  Unfortunately, sometimes things just happen, and products are shipped with defects.  This happens to every manufacturer at one point.  Take the printer back and exchange it.

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• question of northbridge nw8440, looking for the replacement of good mobo

  Hello
  I'm my nw8440 mobile workstation (T7400, FireGL V5200, 15.4 "WUXGA) seems to have some problems of northbridge and I'm looking for the replacement of the mobo.

  I can read "Maintenance and service guide" he shares the same mobo (SPS-416397-001) with nc8430 and nx8420. But is it really the same thing? Because my nw8440 is equipped with a welded gpu FireGL V5200 those others have rather a X 1600.

  Thank you

  Mac.

  http://www.eBay.com/ITM/grade-A-HP-Compaq-NW8440-motherboard-Assembly-ATI-416397-001-242A-/151323954802?PT=motherboards&hash=item233b9c4e72

  REO

• Pavilion Notebook PC 15 no: not possible for laptop replacement screen

  My mother bought a computer Notebook PC 15 non - Pavilion laptop touch screen. A few weeks later, the screen was smashed. I went to my local repair center (PC World) and asked if they could replace the screen. They said that they could not so I decided a have a good good to watch online and could not find a replacement of the exact screen to the laptop. We have seacrhed worldwide for a replacement and have not found one. Our guarantee covers only the technical problems and we didn't have the laptop a few weeks.

  We then rang the HP customer service and asked if they could fix it. They said that they could only fix it for £250 or completely replace the laptop. We thought it was ridiculous absoulety because it was worth as a cellar that was worth half of the laptop.

  I'm sick and tired and fed in place of the search for replacements of the screen and finding none. Right now we are sitting here and pay for a laptop that has a broken screen.

  What I can't wrap the head around if anyone one of these laptops purchased from you or PC world and had a comprehensive warranty on the laptop and they break the screen how they replace or repair? Because PC world could not afford to keep replacing each time a computer laptop full and nobody could not afford to continue to pay £250 to get the screen fixed.

  If this is the case your accessibility to replacements for products and services are terrible and your expensense are high especially when the screen itself is worth about £50 himself. This is disgracefull.

  Here are the 15-p264na Service Manual:

  Manual

  Your listing says that it is a panel of LED Brightview 1366 x 769 thus:

  15.6 LED BrightView HD HD WLED SVA SVA flat display panel

• check for windows update problem

  A few weeks ago, I upgraded my windows 7 windows 10 but because of some problems of material in the pointing device that I've once again to windows 7. After going back to windows 7, I restore my computer to its original factory State and then I checked Windows update, but it is always looking for update, it got stuck.

  Please help me for the above problem.

  Follow these instructions exactly to the difficulty of updating Windows.
  First set of Windows updates never verify updates.
  Next, restart your computer, and then install KB3020369, if not installed.
  Then, install KB3172605.

  Windows updates should return to normal. You can then put your updates to automatically check for updates if you wish

  https://support.Microsoft.com/en-us/KB/3020369

  https://support.Microsoft.com/en-us/KB/3172605

• I would like to become an installer of 'trust' for any future problems. How can I go about it? Thank you

  I would like to become an installer of 'trust' for any future problems. How can I go about it? Thank you

  You may have permanently damaged your Windows installation, but it is difficult to decide this question, although an online forum such as this.

  You should not have deleted the files of C:\Windows\winsxs\amd64_microsoft-windows-tabletpc (unless you were actually only removing shortcuts).

  WinFix is generally regarded as malware--> http://www.spyware-techie.com/winfix-10-removal-guide

  I don't use Windows Live Photo Gallery (assuming that's what you are referring), so for the best chance of getting help, you should ask a question here--> http://answers.microsoft.com/en-us/windowslive/forum/gallery-files?sort=lastreplydate&dir=desc&tab=threads&status=all&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=all&tm=1460601829025

  Use an object as "Icons of WINSXS in Photo Gallery" and to include a link to this thread--> http://answers.microsoft.com/en-us/windows/forum/windows_7-files/i-would-like-to-become-a-trusted-installer-for-all/488de805-9ca7-4e7c-901f-4b995fe9a6aa?msgId=5890890b-04be-421b-b622-0f839a815360

  While you wait for a reply here, follow these steps.

  Open the Photo Gallery, then click on the 'File' menu (to the left of the 'Home' menu)

  

  In the menu that opens, click on 'include file '.

  

  In the window that says "Change how this library brings together its content" (one at a time) select every item other than 'My images' and 'Public Photo' and click on 'Remove' and then click OK.

• General photos of troubleshooting for print quality problems

  Click here to see the detailed description of the following topics for Diagnostic tools and maintenance to get the best photo prints.

  What is a quality Print diagnosis report?
  How to print a Diagnostic print quality report
  Potential problems that could appear in the report
  What to do if you see flaws on the report
  Example: Printing is spread?
  How to clean your print heads
  How to align your printer
  Find a printer HP Photosmart printer tools

  Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

  Best regards
  Kenneth

  I hope this helps!

• How much does it cost for a replacement battery for an iPhone 5

  How much does it cost for a replacement battery for an iPhone 5

  In the United States, $79,00.

  IPhone battery & Power - official Apple Support