Follow-up of command line question
Earlier today, I asked for advice on how to remove a troublesome file using the command line.
When I opened the command prompt, it is set to c:\Documents and holder
I tried led annoying file
The command prompt said not found
However, my embarrassing is a record in the E:\ CD player (file waiting to be written on the CD)
Please indicate how do to the E:\ Command line CD player.
Thank you... I am confident that I'm getting closer to delete this file!
Forget to e. The file is not on E, it's on your hard drive (C) waiting to be burned (written) on a CD (that will E).
When you have done the research and found the file, what happened when you selected (clicked once on) the file and you press the delete key?
If for some reason you can't use the graphical interface (for example, Windows Explorer) to remove the file, open a command prompt.
[Press ENTER after typing each orders]
The prompt (as you noted)
C:\Documents and holder
Local parameters of type cd
The prompt now show you C:\Documents and Settings owner
Application of type cd data
The prompt now show you C:\Documents and Settings\Application Data of owner
Type cd Microsoft
The command prompt now shows C:\Documents and Settings\Application Data\Microsoft owner
Type cd CD Burning
The command prompt now shows C:\Documents and Settings\Application Data\Microsoft\CD Burning owner
Type dir
You should get a list of all files in the directory of CD burning. Most likely, your annoying file is listed. Led type followed by the file name.
You could do all this in one step, of
C:\Documents and holder
Type cd "C:\Documents and Settings\Application Data\Microsoft\CD Burning owner"
The quotes may or may not be necessary (I don't remember at the moment), but should not hurt to have them.
Tags: Windows
Similar Questions
-
BB10 signature command line question says:
command line says:
Error: Code signing request failed because this version of the application or the package has been previously signed. If please increment the version (s) and try to connect again.
Manifesto says:
Archive-manifest-Version: 1.5
Archive-created-by: BlackBerry Elf Packager 1.7 BAR
Package-Type: application
The author of the package: the blue Gystrophacy
Package-author-Id: testVGhlIEJsdWUgR3lzdHJvcGg
Package name: ras
Package-Id: testRel_ras___1b824___
Package version: 1.0.2.1
Package-Version-Id: testMS4wLjIuMSAgICAgICAgICA
Package-Architecture: armle-v7
Application name: SiteManager
ID of the application: testRel_ras___1b824___
Application Description: Toolbox for manufacturers
Application version: 1.0.2.1
Application ID-Version: testMS4wLjIuMSAgICAgICAgICA
Request-requires-system: Tablet OS/10.0.4.0
Mode-application development: false
Name of the entry Point: SiteManager
Entry-Point-key: e1
Entry point: WEBKIT_NUMBER_OF_BACKINGSTORE_TILES = 12 app/native/wwe
Entry-Point-Type: Qnx/Elf
Entry-Point-Icon: {86x86}native/resources/icon-86.png:{150x150}native/resources/icon-150.png
Entry-Point-Splash-Screen: {1280x768}native/resources/splash-1280x768.png:{768x1280}native/resources/splash-768x1280.png
Entry-Point-focus: auto
Entry-Point-user-Actions: access_internet
Entry-Point-System-stocks: run_native
I changed the number of version two times now and always doing this to me. any ideas?
User error:
in ripple settings name of archive I've capitalized the s in sitemanager
-
Deployment of final application with the command line Question
OK so I have my finished application.
on a folder in my office called "CODBOUG".
So I tried different methods to run the application and complete the test on the Simulator with the command line. But it's just too much. So I need your help community!
I tried:
BlackBerry-deploy-installApp-package CallofDutyBlackOpsUltimateG
uide.bar - device 192.168.18.128
I'm a little lost with the help of the command line, if someone could guide me on the right lane.
I'm on windows, btw.
Thank you.
When you run a command, Windows will search in a series of directories for this program to run. The list of directories is stored in what is called an environment variable. You must add the path to the bin of the sdk at this variable directory (e.g. C:\Program Files (x 86) \Adobe\Adobe Flash Builder Burrito\sdks\blackberry-tablet-sdk-0.9.3\bin).
You can access the path variable by right-clicking on my computer > properties. Select the Advanced tab and click on approx. Variables.
Under System Variables, search PATH and edit it. Add the path to the sdk bin directory (make sure that there is a semicolon, that separates the directories).
Open a command line window in the directory where your .bar file. When you run the command, Windows will look for blackberry - deploy and can be found in the directory that you have added to your PATH variable so to run it.
-
Customer has 52 profile and EX90. I'm looking for orders from command line to have 'A' 'B' call, then the Conference to 'C '. I'm currently testing several ways and want to ensure that the call is pushed over the MCU.
Thank you
Robert
Hello
I recommend to check on the guide of the APIs here.
The command to place a SIP call to the 1920 call would be:
xcommand. dial: [email protected] / * / SIP protocol: bandwidth: 1920
xCommand Dial
Dial a number from the system. Returns information on the CallId and ConferenceId, which are necessary for some other commands.
Number: Enter the number or address. Protocol: Select the Protocol h.323 or SIP. CallRate: Fix a rate of call. CallType: Select the type of audio or video call.
BookingId: any identifier that an external booking system (e.g., TMS, CTS - MAN) can use for its own references to match calls placed with the internal identifier systems of booking for a meeting. This can be any string, for example, a GUID. The reservation Id will be provided in the call connects, events of appeal etc. for the call.
Requires the user role: USER
Parameters:
Number (r): Protocol: CallRate: <64..6000>TypeAppel: BookingId:64..6000>
Example:
xCommand Dial number: 543210 Protocol: h323 OK * r DialResult (status = OK): CallId: 2
ConferenceId: 1 * end
I have not tried to climb multiway but I would then try to hold, call another point of termination, then the command joining. Looks like you need to the Callid returned by a command call xstatus .
xCommand Call Hold
Put a call on hold. The CallID returned by operating the xCommand command Dial. During the call, you can run the xStatus calling command to see the CallId.
Requires the user role: USER settings:
CallId (r):<0..65534>0..65534>
Example:
xCommand Call Hold CallId:19 OK * r CallHoldResult (status = OK): * end
xCommand call Join
Join all existing, active and put calls on hold.
Requires the user role: USER settings:
No parameters.
Example:
xCommand call Join OK * r CallJoinResult (status = OK): * end
Thank you
-
3 command line questions simple esxi
Hello
I have 3 simple questions on the ESXi-shell commands1. How can I execute a command dd and gzip the results without storing the file somewhere?
/ tmp # dd if=/vmfs/devices/disks/mpx.vmhba1\:C0\:T0\:L0:1 of=/tmp/dd.dump bs = 1 M count = 20
/ tmp # gzip - c dd.dump > dump.gz
instead of these 2 lines do it all in one without store dd.dump
2. how created a list of all the vmx files in a data store without also listing the files whose name as vmx - blabla.vmdk vmx or *.vmxf
the output must use full paths so I need something like this but without the false resultsfind/vmfs/volumes/datastore1 / * | grep ".vmx" | grep - v '.vmxf' > vmx - files.list
3. How can I grep all files in vmware*.log in a data store for a complex chain as "scsi0:0.filename ="redirect results in a file that lists the results like.
/ vmfs/volumes/datastore1/test/test. VMware.log: 2012-10 - 01 T 07: 19:00.120Z | VMX | Scsi0:0.fileName DICT = WIN02.vmdk
/ vmfs/volumes/datastore1/test2/test2. VMware.log: 2012-10 - T 02, 07: 19:03.120Z | VMX | DICT = test2.vmdk scsi0:0.fileName
Thanks in advance
3. you could xargs - find/path/to/vmfs /-name 'vmware*.log ' | XARGS grep-i chain
I guess that's 4.1 - I'm still not sure if ESXi xargs
HTH
~ Stephanie Sai
-
ExtendScript Toolkit running command-line - approved place message
I run the following in a command line of Windows 7:
"C:\Program Files (x 86) \Adobe\Adobe ExtendScript Toolkit CC\ExtendScript Toolkit.exe"-run "C:\Users\john\AppData\Roaming\Adobe\InDesign\Version 11.0\en_US\Scripts\Scripts Panel\example.jsx".
However, I get the message "you are about to run a script in Adobe InDesign CC 2015. You should only run scripts from a reliable source. "You want to run the script", with Yes/No options.
I was wondering if there is a way to remove this message from appearing. According to Indesign Java Script running error, this message is deleted if the jsx script is located in a trusted location. I thought that C:\Users\john\AppData\Roaming\Adobe\InDesign\Version 11.0\en_US\Scripts\Scripts Panel is a trusted location.
In my documents
Folder.myDocuments; ~/Documents?
Do Folder.myDocuments.execute ();
Should see a folder called it Adobe Scripts.
If it not is not, create it.
HTH
Trevor
-
I need help with a question command line syntax
I got 3 issues that need to be entered in command line / syntax.
I had no training in command line and need help for that setting in the command line syntax.
(The IP address is a fact).
This will be done also on a PC that requires elevated permissions. So if a programmer can zip through it in no time it would be much appreciated. Perhaps one without high and an example with.1 setting up daily ping test to a server with the IP 10.254.254.1 which will be composed of 1 000 ICMP echoes.
2. establish daily ping tests to a server with the same IP address which will consist of one hundred 1 500 bytes ICMP packets.
3 configure these run every day and are output to a text file.Hi Matt,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.
Please post your question in the Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/
Thank you.
-
The question of command line CAP.
So I'm all new development of blackberry, but I found an inexhaustible amount of info (from this forum and experienced developers). I read a lot of posts on the lines of command about the file randomly Googling rapc.exe. My problem is that my .cod files are too big. I understand the maximum number of bytes allowed in a .cod file is 64 KB, unfortunately my files have reached 90 KB in size. I can't delete images and unused classes because they are all very functional and that it.
I heard the wind of a command line that can be introduced to rapc.exe which will set - slicesize = NNNN and datafull - NNNN = as a solution to my problem. This seems perhaps too technical for my situation, I'm not using my head today. The problem is I'm having trouble finding how to add these command lines, or what that means yet. My blackberry app is that several weeks of deployment AppWorld I love just to test it on my blackberry like point and click does not create the same user as on a touchscreen phone experience.
I know there are a lot of great developers on this forum, and I understand that there are a lot of excellent programmers. Can someone help me to conquer the sensation "noob" I'm feeling right now and guide me with a somewhat dummed down from the version of the technical explanation.
In short, how can I add the command lines above named rapc.exe preferably with output using 3 third party programs or modifying an output by the compuler file. I want to implement the compiler to ignore the warnings of size for the .cod files, as long as it's not a bad practice.
Thanks in advance! -Andrew Mason
Ok. I was average overhtinking this, I guess it's easy to limit the size of your .cod simply by making the additional source folders. I made two additional folders res and split my resources evenly among them. There was a lot of workarounds that appeared to be more work than they were worth. It's a quick and easy solution. Thanks for the link, it helped a bunch got my brain moving.
-
Strange behavior with the function «Help in command line»
So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:
If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.
All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:
Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?
Note - side
Curiously, the Index for the help lvconcepts.chm file looks like this:
In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).
Hello
Please contact National Instruments!
It is a very strange behavior. I tested out and seen the exact
same results you are experiencing. This was reported to R & D (AUTO ID # 130246) for further investigations.
From what I can tell the a possible workaround solution that we have documented
in the post of root Canal. I can't continue to look into this in order
to see if there is no other workaround solution or a reason why it is
run in this way. Thanks much for the feedback! If
you have any other questions on this subject please post them here.
Have a great day! -
0xc000000e - Windows Home Server 2011 - how to open the repair or the command line option
Hello
I currently have the problem that my Windows Home Server 2011 stops booting with the 0xc000000e error code.
Of course, I searched the web and found the following article:
https://support.Microsoft.com/en-us/KB/2261423
Can I boot from my installation DVD. "Windows loading files.
While two options:
-new installation
-repair
I click on repair. The next screen prompts to choose a restore image. ???? No other options or possibilities. No command line, nothing.
OK boot with F8. Start menu. No repair option. Only "safe mode with cmd. Tried this. Then download the same GUI as before. Same two options. No CMD and taxation not possibility to use STARTREP. EXE.
Any suggestions?
Thanks in advance.
Alexander
Hello
Your question is beyond the scope of this community.
Repost in Windows Home Server Forums.
https://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer
See you soon.
-
Hello world!
I need program/reset sharing Internet connection by the command line rather than GUI tools under Windows 2008 Server (could be a .cmd to run startup script or the programmer). Is this possible? Or there is some registry keys I need to set/restore and restart some services?
Thank you very much.
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
-
Need help to use a diskpart command line to create a partition.
Original title: diskpart question - please helpI really need help with the diskpart commands, so I hope someone can help out me. I recently sold a pc on ebay which would include a 320 GB HARD drive. I didn't want to take any chances on the data being restored from the disk I did a "clean up" the disk to be sure.
Seeing how it would take time, I started after work and went to bed. During the night the XP machine, it worked on that decided to do an update and restart. Long story short, I have more the diskpart command line to create the new partition and format the disk, and I can't (don't know how) get machine XP or 7 to recognize the drive.
I do not think that it will hire at all, but the reader is sitting in a docking station and mounted in the machine. If someone could help me I would be very happy. If you can give me a list of commands that I need to get this drive back to normal and ready to ship (so the buyer can easily load their own OS) I would be eternally gratefull.
Is there another way besides as diskpart to get the disk to format so I can send it ready for the new owner to install its own operating system?Hello
Step 1: Format your hard drive using the Installation disc.
If you have the installation disc, you can format the hard drive.
To do this, follow the steps below:
(a) place the installation disk in the system tray.
(b) restart the system using the installation disc. (This is commonly known as booting from the installation disc).
(c) during the installation process, you can re-partition and reformat your hard drive
Note: the process will erase your files and programs, so remember to make backups of your data files and the program before you start.
Check out the link:
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
You can try following the steps from the link below
http://support.Microsoft.com/kb/313348
For Windows vista -http://Windows.Microsoft.com/fr-fr/Windows-Vista/Create-and-format-a-hard-disk-partition
For Windows 7 - http://windows.microsoft.com/en-US/windows7/Create-and-format-a-hard-disk-partition
I hope this helps.
-
How Windows to determine which file to run with some command line commands?
I had someone ask me an interesting question, and I really didn't have a good answer for them. We were talking about the command prompt. I showed them how they could start some programs simply by typing a command at the command prompt. Their question is how is it, some files require a full path to start? Also how the Windows does not know which file to run when the 'explorer' simple as orders are entered?
Thanks in advance!
Hi, Deedubbadoo,
Their question is how is it, some files require a full path to start?
You can have some files in the same directory that share the same file name but have different extensions. For example, you might have a file named compta.com can launch an accounting program and another called Accnt connects your system to the accounting system network.
The operating system searches for a file by using default file name extensions in the following order of precedence: .exe, .com, .bat, and. cmd to run Accnt so that compta.com exists in the same directory, you must include the .bat extension in the command line.
If a component of a path is a file name, it must be the last element
Therefore: Explorer
-
I need to pass command-line variables in a file - remoteapp.rdp
my normal program outside the remote desktop would be
R-A123456 program.exe
I could not pass command-line variables in the file program.rdp.
Program.RDP R-A123456 does not work.
from the program.rdp file
replacing the shell: s. ProgramName
remoteapplicationprogram:s: | ProgramName
gatewayhostname:s:
remoteapplicationname:s:ProgramName.exe
remoteapplicationcmdline:s:
Help
Server 2008 R2
XP Professional SP3
Hi John,.
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.
-
Feeding through command line management
I am aware that GPEDIT. MCS opens Control Panel - but how (using the command line) is the possible PC to go into hibernation?
This is a problem I need to find a solution to--to a network of about 800 PC and, of course - the alternative (manually visiting each PC and perform the task manually) is out - seeks therefore to a network drive...
-It must concern "All Users" - POWERCFG. EXE will only affect the current user.
Any other suggestions?
I'm guessing you want to write a PowerShell Script Server to connect to the Instrumentation WMI (Windows Management) of each client Machine XP and change the settings in this way; Unfortunately, because I'm not a sysadmin, I don't know exactly how it would happen.
Information about WMI and how he peut help you:
http://TechNet.Microsoft.com/en-us/library/ee692772.aspx
http://msdn.Microsoft.com/en-us/library/aa394582 (v = VS. 85) .aspx
How to use WMI via PowerShell:
http://TechNet.Microsoft.com/en-us/Magazine/2007.05.PowerShell.aspx?PR=blog
http://www.powershellpro.com/PowerShell-tutorial-introduction/PowerShell-scripting-with-WMI/
Finally, you can probably get a pretty good answer if you post your question in one of the following locations:
- Forum script: http://social.technet.microsoft.com/Forums/en/ITCG/threads/ (as far as I know it is the best, place to ask questions about WMI)
- PowerShell Forum: http://social.technet.microsoft.com/Forums/en-US/winserverpowershell/threads
Maybe you are looking for
-
Noisy HDD downloading with more than 2 Mbps Internet
When I download with more than 2 Mb/s to the internet, I hear a noise continuous scratchin/scratching. After I stop downloading the noise disappears. It has 5000 hours working time. Toshiba 120 GB SATA/300 5400 RPM 8 MB 2.5 "MK1246GSX...
-
My beginning of doen't Satellite x 205
Hello. My Satellite X 205 SLI3 laptop (bought in the United States) won't start. I have a white screen computer Ant portable 1 long beep and 2 short beep sounds. What is the problem and the solution? Thank you for your help. Kind regards. OURSONNET.
-
Qosmio PQG31A motherboard graphics controller
Hello I have a Qosmio G30 PQG31A and the graphics controller / GPU is dead! can someone tell me if there is a Toshiba repair center in East Sus *.
-
HP Office Jet 6000 wireless duplex printing problem
(Note: all printers updates have been made) Printer works great as duplex, however: I try to Print Duplex (1/2 letter size pages - portrait booklet with the paper size of 8.5 "x 5.5" ). When I go to print I select the paper size for brochure (predefi
-
Sansa View not recharge, but the battery becomes hot, no blue ring
I just bought a Sansa View, my first MP3 player. It did not really work just yet, I've had a week now. The battery life is very short. What I can't understand is this evening when I plugged it in to recharge, it will not respond with the blue ring an