follow-up of the CPU

Similar Questions

• Follow-up of the CPU of a Dell N2024P OID

  Hello

  Is it possible the workload monitor CPU on this model?

  If this is the case, what OID would give me information?

  Thank you.

  I think that all the CPU utilization OID for N-Series switches are de.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.   Here are some examples...

  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1 (total free memory)

  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2 (total memory)

  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3 (table for the following...)

  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.1 (index)

  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (name of the process using CPU)

  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (% CPU used by the corresponding process)

  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4.0 (accumulation of CPU)

  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.9 (CPU)

  B

• The CPU monitoring

  Hello

  I'm new to BB, I configured the client bbc4.40 on the linux system. In the part of the cpu that it is dispalyng only the average load rather then HIGH output which I used to get the bbc4.20 cliect. Please suggest which changes I should make to get the EFFORT produced in the follow-up to the CPU.

  Thanks in advance.

  Yogesh

  Hello

  What is your Linux platform? RedHat or Suse?

  If it's Red Hat or Suse, on your BB client Setup, add

  TOP = "/ usr/bin/top.

  TOPARGS = "-b - n 1"

  export TOPARGS TOP

  to etc/bbsys.local

  and restart the client

• "Installer" taking up the CPU

  I have an iMac end of 2012, and lately he worked very slowly. A few days ago, I checked the activity monitor to see "Installer" take a lot of CPU. I leave and rejected it as an error, but sometimes it starts to do it again.  I just kept smoking them until I found several installers taking up half of the space of the CPU. I did some research and I read that the Genio virus, but there is no house icon in the upper right corner and I just can't find any files for it.

  Can download some adware or malware.  A simple, fast and safe way to remove adware and malicious software is to download and to use Malwarebytes Anti-Malware for Mac. There has been developed by one of the most respected contributors and the top of the page in these forums and recommended by almost all of the top contributors here.

  If you prefer to do it manually, follow these instructions in the site theSafeMac.com (author of Malwarebytes): adware removal Guide

  If you want to check to see what adware/malware, you may have before you run Malwarebytes and then download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple Support personnel) of the CSA to provide an overview of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• Firefox does not start (not safe mode), but uses the CPU

  I have the latest Firefox 25.0 (and the last Flash 11.9.900.117) on Windows 7 and the following behavior is reproducible. It started not too long ago.

  At first when I launch Firefox, nothing appears no matter how often, I restart. I see in the list of the process firefox.exe to 25% of the CPU, 2 x FlashPlayerPlugin_11_9_900_117.exe (CPU 0%) and plugincontainer.exe. No matter how many times I killed all of them, would not restart Firefox.

  The following also not help in this situation:

  • Starting in normal safe mode: Firefox opens a window but immediately freezes and does not respond. The process list shows the same process even if I find the unexpected FlashPlayer.
  • Disable plugincontainer: same results (just without plugincontainer.exe)
  • Uninstall Flash: Same results (just without FlashPlayerPlugin)

  The following can start Firefox only once:

  • Starting in SafeMode but select "Reset Firefox": Firefox does not start right away, however. Nothing happens, and you have to kill the process. However the very next time you launch Firefox in the normal way, it works fine (but it shows FlashPlayerPlugin.exe in the list of unopened Windows process despite the tab). Unfortunately, after closing Firefox the process (Firefox, FlashPlayerPlugin) are not deleted. I kill and the problem with Firefox do not leave reappears.

  In case you use "clear history of Firefox closing:

  • do not delete Cookies

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  Use "Firefox > output" (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit) to close Firefox if you are currently doing by clicking on the X close in the title bar of Firefox.

  Create a new profile manually (and not via the reset) as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Satellite A10 S203: the CPU fan does not work properly?

  I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

  Hi SACRIFICE them.

  Here are some possible solutions to this problem of fan.

  1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

  2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

  If please check this and an answer then follow the next step!

  CAMPino

• Satellite M30 - is the temperature of the CPU ok?

  I do a portable M30 growing for a friend and I noticed that the CPU temperature is between 55-72 ° C. I installed an app called sensorsview that monitors the temperature of the CPU.

  This site indicates the maximum temperature for processors Pentium M is 100 ° C, but does not specify the average (it is 1.7 GHz and Centrino). Does anyone know what should be the + average? +

  [http://www.heatsink-guide.com/content.php?content=maxtemp.shtml]

  Hello

  First of all I m a little carful with this type of material followed tools regarding the temperature of the CPU. I mean that if everything is ok, the laptop will not shut itself or something else. In my opinion these tools may not can read the temperature correctly.

  In any case, 72 ° C is in my opinion a little too high. You should try to clean the laptop. I guess there are a lot of dust in the radiator. Use the jet of compressed air to clean the laptop, it can blow out the dust.
  This is why you should not disassemble the laptop so it of pretty easy to use.
  Check it!

• Can satellite L755D-21J - I upgrade the CPU or GPU?

  Hello.

  I wondered who, for centuries now,.

  I got a laptop Toshiba L755D-21J,
  Can I upgrade the CPU or GPU?

  I have GPU: APU A6 - 3400M Quad Core
  CPU: Radeon HD 6540 g 2
  RAM: 8 GB

  I wonder if I can pass the CPU or GPU to make it better for the games.
  I love my computer.

  If I can update, what GPU/CPU can I upgrade with?

  Hello

  Best answer you can get reading follow document Toshiba:
  Is it possible to upgrade the CPU or GPU of a Toshiba laptop?

  Check it out.

• Can I upgrade the CPU T2310 Satellite Pro L40 - 15A series laptop PC?

  Hi, (I apologize if this has been asked before, but when I search 'Satellite pro l40 series' I couldn't find any relevant response)

  I've been looking around the net & found contradictory answers to this question so far, so I hope that this forum may be able to help.

  I have a 15 D portable computer Satellite pro L40 and I want to upgrade the processor Intel Pentium Dual-Core 1.46 Ghz T2310 an Intel Pentium Dual-Core T4300 2.1 GHz 1 MB 800 CPU or something similar.

  I found the following issues http://www.notebookcheck.net/Review-Toshiba-Satellite-L40-14N-Notebook.7294.0.html

  "f consider you a CPU upgrade, there is not a lot of options." The Intel GL960 value express notebook chip supports only up to FSB 533 Mhz processors. So, does not allow most of the Core 2 Duo CPU update (with 667 MHz). "

  But then, I also read that the GL960 can run 800 MHz processors?

  I also asked the question on ebay to the seller of the CPU T2310 & received this response

  «SHOULD be OK, but your T2310 533 Mhz FSB and the T4300 has 800 Mhz.»

  Motherboards intel more modern should easily accept a 800 mhz cpu, but I cannot guarantee. May be an idea to see if you can find out if there are other models of Toshiba L40, also with 800 mhz chip, because it would be a good indicator.

  And if I can't pass a T2310 because of the 800 mhz too is their a 533 mhz cpu that will be compatible & more powerful for audio production that my current Ghz CPU T2310 1.46.

  I've only had this PC 4 years again, it seems not to be very mobile friendly if this resource could not be designed to handle upgrades.

  Thanks for the tips.

  Post edited by: ib1

  Problem is that upgrading the CPU is not taken in charge and everything you do is at your own risk.
  See also http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• Replacement of the CPU is possible by Satellite L300 - 12 p?

  Hello

  is it possible to replace the CPU in the Satellite l300 - 12 p with one of the following processors:

  -Core2Duo T5250
  -Core2Duo T7500
  -Core2Duo T8100
  -Core2Duo P8400

  Greetings

  Kat

  Post edited by: kat_1

  Hello

  Please take a look here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35970&tstart=45 (second thread and so everything)

  As well as this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35970&tstart=45

  Hope this will give you some ideas.

  Kind regards.

• ProBook 6570b - are the CPU & GPU extensible?

  Hi, I bought a refurbished Probook 6570b running Windows 7 Professional 32 bit. It seems it does not come with the cpu core but rather a celeron B840 1.9 GHz, not more, it has a discrete graphics unit.

  My question is this. The CPU & GPU are scalable?

  Thank you for taking the time to read this!

  The CPU is extensible. According to the HP product bulletin the following shall be supported:

  3rd generation Intel® Core™ i7 - 3540M (3.0 GHz, 4 MB L3 cache, 35W, 2 hearts) *.
  Up to 3.70 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i7 - 3520M (2.90 GHz, 4 MB L3 cache, 35W, 2 hearts) *.
  Up to 3,60 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3380M (2.90 GHz, 3 MB L3 cache, 35W, 2 hearts) *.
  Up to 3,60 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3360M (2.80 GHz, 3 MB L3 cache, 35W, 2 hearts) *.
  Up to 3.50 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3340M (2.70 GHz, 3 MB L3 cache, 35W, 2 hearts) *.
  Up to 3.40 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3230M (2.60 GHz, 3 MB L3 cache, 35W, 2 hearts)
  Up to 3.20 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3320M (2.60 GHz, 3 MB L3 cache, 35W, 2 hearts) *.
  Until 3.30 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i5 - 3210M (2.50 GHz, 3 MB L3 cache, 35W, 2 hearts) * †
  Up to 3.10 GHz with Intel Turbo Boost technology
  3rd generation Intel® Core™ i3 - 3130M (2.60 GHz, 3 MB L3 cache, 35W, 2 hearts)
  3rd generation Intel® Core™ i3 - 3120M (2.50 GHz, 3 MB L3 cache, 35W, 2 hearts) * †
  3rd generation Intel® Core™ i3 - 3110M (2.40 GHz, 3 MB L3 cache, 35W, 2 hearts) * †
  2nd generation Intel® Core™ i3 - 2370M (2.40 GHz, 3 MB L3 cache, 35W, 2 hearts) * †
  Intel® Celeron® B840 (1.90 GHz, 2 MB L3 cache, 35W, 2 hearts) *.

  with a better processor, you also get some slightly better integrated graphics. If you want graphics discrete, HP supports the following graphics cards: AMD Radeon™ HD 7570 M with 1 GB of video memory dedicated GDDR5

• Simple Script Execution: Days and only using 15% of the CPU power

  Dear community,

  I have a data file (.tdm) with 17 channels of waveform point each containing 13742499 data. I want to delete all the data points that are not actual load points. I have build a canal ("LoadTrigger") that is a trigger for points of interest. With the following script, I tried to erase the im not interested datapoints:

  Dim RowCount

  Number of lines = 1 to GlobalChnLength

  ChnVal if (RowCount, "/ LoadTrigger") = 0 THEN

  Call the DataBLDel ("1-17 ', RowCount, 1" ")

  End If

  Next

  The script is now running for more than 20 hours with no result. Can someone please tell me if I am wrong in my script, or if there is a way to make it faster?

  In addition, I wonder why DIADEM uses no more than my cpu power? As you can see in the photo attached DIADEM mainly use a carrot and never more than 15% of the CPU.

  

  Best regards and hoping answers of construcitve!

  If you try to delete rows based on conditions, you can use code like this:

  Option Explicit
  
  CreateExample
  
  "Make sure that the correct group is active.
  
  data. Root.ChannelGroups (1). Activate
  
  ' chncalculate allows you to set values that match a NOVALUE condition
  
  Call chncalculate ("Ch (1) = Ch (1) + CTNV (0 = Ch (1))")
  
  'Delete the lines that contain a NOVALUE in channels '.
  
  Call ChnNovHandle ("[1] / [1]", "" [1] / [2]'-' [1] / [3]'","Delete","XY", 1,0, 0)
  Sub CreateExample()
  
    data. Root.Clear
  
    Dim g: g = given game. Root.ChannelGroups.Add ("group")
  
    Dim c1: set c1 = g.Channels.Add ("c1", DataTypeFloat64)
  
    Dim c2: set c2 = g.Channels.Add ("c2", DataTypeFloat64)
  
    Dim c3: set c3 = g.Channels.Add ("c3", DataTypeFloat64)
  
    I have Sun: for i = 1 to 100
  
      C1 (i) = I mod 2
  
      C2 (i) = I have
  
      C3 (i) = i * 0.00001
  
    Next
  
  EndSub

  that will remove all lines that contain a 0 in the first round.

  

  will be converted to

  

• The CPU usage of Flex-2 15 30% when idle after upgrade to Windows 10 * contains large Images *.

  BTW my 15 Flex-2 upgrade to Windows 10 Home took place, working after a few minor updates manual driver (WLAN, graphics)...

  However, since the upgrade, I feel an annoying symptom, which has been reported by users of other brands as well.

  Although I already follow most of related advice (known assassination unnessary process, change of reports), the CPU usage is still constantly around 30%, causing the fan to operate continuously and even more unsatisfactory: extremely affecting the battery life! Using processexplorer that I discovered, that svchost (or one of its processes) is at the origin of the problem, not one of the applications. As I am not able to dig deeper, I wonder what measures taken so far by Lenovo to have the Microsoft fix this problem.

  Attached: screenshots 'notification', 'Treaty', 'system '.

  Other tips are appreciated.

  

  

  

  Mod edit: added warning about large images for those who have slow Internet service.

  UPDATE Oct10:
  

  Went to manually check tile Lenovo Support and offered an update of SystemInterfaceFoundation.exe.

  Run the update and believe it or not: the CPU usage is almost back to normal (about 4%) with browser open FF and AV SW race. less than 2.5% use svchost. Fan turns down to 'stop' or low speed.
  Can someone pls? Be wary of situation for the next few days...

  Update Oct11:

  No idea how to mark this "resolved" thread: System runs stable like a charm. Quiet, low CPU utilization and the normal battery life.

  No other text. Problem solved. See above

• HP Pavilion 17 Laptop: impossible to switch to windows 10 windows 8.1 because the cpu is not compatible.

  Hello

  When I tried to download windows 10 via the 10-notification windows on the taskbar, it said that my laptop could not download windows 10 because my processor is not compatible. I am running windows 8.1, and normally all laptop running windows 8.1 should not have problems with the cpu upgrade to windows 10, so I don't know what could be the problem.

  Your portable computer is compatible with Windows 10.

  You have no need for the icon get Windows 10 to install Windows 10.

  You can download an ISO or proceed directly from the Microsoft web page at the following address. https://www.Microsoft.com/en-us/software-download/Windows10

  Some drivers have been provided by HP alreaduy at the following link.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-17-notebook-PC-series/5401229/model/7101268#Z7_3054ICK0KGTE30AQO5O3KA30R1

  You can get the rest of the drivers required since Windows update.

• AppleMobileDeviceService.exe always takes 50% of the CPU usage.

  Original title: year App called AppleMobileDeviceService.exe constantly takes 50% of the CPU usage.  I'm not using iTunes.  Said Apple iI should ask Microsoft.  I use oper AX. sys.

  An App called AppleMobileDeviceService.exe constantly takes 50% of the CPU usage.  I am not connected to iTunes and my iPod is connected to my PC when this .exe runs with 50% usage.    Apple suggested that contact Microsoft.  I use oper AX. sys. Apple has suggested to contact Microsoft.

  Hi Armycyrus,

  Have you done a recent software or hardware changes to the system?

  Method 1:

  If iTunes is installed on the system, you can try to uninstall and reinstall the same and check if it helps:

  For more information, see the article:

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

  Method 2:

  It seems to reset Winsock has solved the problem:

  For more information, see the Apple support links:

  HT3204 Apple Device Support hogging CPU, impossible to download podcasts

  Apple on Windows software: can see the performance problems and virgins iTunes Store

  Alternatively, you can try to reset Winsock and check if it helps:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  Important: The foregoing contains as follows to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP