Follow-up of the time users spend on a question

Is it possible, and if so, how, to follow how long a user spends on a question?

Thank you!

Hello

I can point you to one of my blog posts?

Quiz, indicating the elapsed time

This could be a starting point, I don't know if that's what you're looking for? It stores the time in a user variable, you probably want it to be exported to?

Lilybiri

Tags: Adobe Captivate

Similar Questions

  • Is it possible to set up my computer with Windows XP to limit the time kids spend on this subject?

    My kids use the computer too much and I want to limit the time spent on the computer to 2 hours per day. Is there a way to do this in Windows XP? I know you can do this with Windows 2000.

    Hi Suzana,

    Found some information at http://www.neowin.net/forum/topic/501603-restrict-logon-time-in-group-policy/

    I hope this helps.

  • What is the unknown user with a red question mark next to it.

    When I click on a file > properties > security I get an unknown user who has a red question mark next to it.   It appears only in my stuff important such as my documents and all my backups. It is not there in my pictures or my music. Can someone please enlighten me, as I think someone may have access to my PC.

    When I click on a file > properties > security I get an unknown user who has a red question mark next to it.   It appears only in my stuff important such as my documents and all my backups. It is not there in my pictures or my music. Can someone please enlighten me, as I think someone may have access to my PC.

    It is quite normal to have tags to users that may have existed in the past, files. They have no effect unless there is a corresponding account. What counts is what the user accounts exist on your computer. Have you checked those?

  • How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal.

    How can I remove "the folder/Users/user/to/mygame doesn't exist." Terminal. Rises every time I launch Terminal. I am a novice. Thank you very much.

    1. Please select from the menu bar Terminal

    ▹ terminal preferences... ▹ Profiles ▹ Shell

    If the run command box is checked, uncheck it or enter the command to run automatically (if any), each opening of a Terminal window. Note: this is not how you define a default shell.

    2. If step 1 does not resolve the problem, see below.

    Back up all data.

    Select

    New Shell command ▹

    in the Terminal menu bar. Uncheck the box marked

    Run the command inside a shell

    If it is enabled.

    Copy and paste the following line into the text box that appears, and then press return:

    /bin/mkdir disabled_shell_files

    Close the Terminal window that opens. Repeat with this line:

    /bin/mv .profile .bash_history .bash_profile .bashrc .inputrc disabled_shell_files

    History Shell and former initialization files will be saved in a directory named "disabled_shell_files" at the top level of your home directory. It is normal that some of these files do not exist, and therefore, you will get error "no file".

    Close the window and open a new test.

    You may already know that files with name starting in '. ' are not visible in the Finder by default. So, if you open the folder that you created in the Finder, it will appear as empty, even if it is not. If you need to recover a portion of the data in the files of the shell, use a shell such as nano-based text editor (1). Make sure that you're not recreating the problem. Otherwise, you can delete the folder.

  • Two thunderbird profile both at the same time with the same user account

    Dear Sir
    I would like to use Thunderbird two at a time for two different profiles with the same user accounts.
    I use linux OS.
    I thought using the:

    1. Thunderbird Pei Profile1 &
    2. Thunderbird Pei Profil2 &

    But at the launch of the second order, that nothing is happening.
    Appears in the foreground thundirbird already started.

    If possible use this configuration now or in the future nex?

    General rule, thunderbird runs only a single instance of a profile.
    However, there are two options, you can try.
    You can use an addon esily switch profiles:

    There's more help here:

    He said: "several instances is expected for debugging, so use it at your own risk.

    One method would be to use: start > run
    "C:\Program Files\Mozilla Thunderbird\thunderbird.exe"-no-remote Pei profilename

    There is a space before '-no '
    and also before '-P'
    followed by a space and the name of the profile

    You can create a shortcut icon to run each separate profile.

  • How can I capture the time of startup and logon for XP users on my domain?

    How can I capture time (or time)
    -for users to access the logon screen (references)
    -users press OK after entering his credentials on the logon screen
    -Office XP that appear in a usable format moderately (for example, the user is able to open Explorer)

    We have problems with the connection of slow/slow start (SBSL) with Windows XP on the field and we would have 'real' numbers before you start so that we can have a base line and that you don't need to ask users what they mean when they say "it's a bit slower than usual" (and we'll know what stage of the startup procedure is slow). We would like to be able to capture (without intervention of the end user) following in a file or somewher event schedule so that we can measure how slow (or not), they are and what stage is slow, and what days it was slow. We are already capture the userenv logs.

    Hello

    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

    http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  • User profile service: when I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

    When I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

    Isn't that one profile, the administrator and another account are ok

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947215#letmefixit

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • After the system recovery running following a power outage, my user profile is lost. Unfortunately, he is also the administrator account. How to retrieve the profile or create a new?

    After the system recovery running following a power outage, my user profile is lost.  Unfortunately, he is also the administrator account.  How to retrieve the profile or create a new?

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • I also, I get the error "the service user profile Service has no connection, failed to load the user profile" but I have not been able to correct the problem by following the listed solutions.

    I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip.  It is on the login page.  My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.

    I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files.  How can I fix the desk top to coinside with his status of being online.  Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.

    Home Group is Windows 7.

    Here is the Vista Forums.

    What operating system do you use?

    Vista info below:

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • How to stop following a topic in the forum of the Apple users?

    How can I stop following a topic in the forum of the Apple users?

    Click the button following the top of the thread. If you are using an adblocker, you may need to disable temporarily to do this.

    (140801)

  • I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in one class. How to unlock my password. Carol in English

    I teach online and all my classes have the same user name and password. Now that I clicked "remember me next time", I can connect only in ONE class. How to unlock my login and my password, so that I can use it for all classes. Carol in English

    "Remember Me" for the site connections automatically when you return to the Web site is done with a Cookie the site in Firefox.

    Try to clear your Cookies for this Web site.

    Tools > Options-> life privacy - Cookies = the button show Cookies.

    You must use the custom settings for history at the top of this tab to see the View the Cookies button.

    Enter the domain name in the top search bar and all Cookies for this URL will be displayed. Unless you can figure out which is Cookie to "remember me", you will need to delete them all.

    Hold the {Ctrl} key while you click each Cookie in the small window. When this list is all highlighted, click the Cookie delete button at the bottom left.
    When you are finished click Close.

  • After a time when the data added to the interface user blocked - WPF

    I am currently using WPF graphics.

    I have created a simulation that describes the problem that I have experienced in my application (attached).

    I have two sons, we generate data (in my application gets the material data every second) and the other copies the data in the user interface (copy the data to a variable, which bind to the data source).

    Every second I get 1000 points and adds them to the data. The first seconds it works well, after a while it gets stuck.

    I added a listbox control that displays the time, need to add the variable data and gradually increases.

    I have two questions:
    (1) did whenever I have add data, it attracts all the existing data again? If so, theres a way to improve or prevent this behavior?
    (2) how many points can represent the graph at a glance? (which is the limit of the graph)?

    Thank you

    HODAYA Shalom.

    Your example updated debugging, I think that the question is the Dispatcher.Invoke calls that you use to communicate with the user interface thread. Since you use the delegate only, all calls are sent with Normal priority, which means that events of low priority (as made graphic, or updated on day of data binding to scales) can get transformed. Using a lower as priority Render four Invoke calls not glued to the UI in my tests.

  • I want to set how much time they spend on the computer not when. How do I do that? There was a tab, but it didn't.

    I don't see the screen of curfew, I want to set the number of hours that they can use on a daily basis.

    Hi SamenaBrinkman,

    Deadlines for Windows 7 can only set curfew for a configuration of the user as a child under the Family Safety. You are probably referring to the allocation of time; feature that can define how many hours a certain user can consume in a day. Allocation of time is only available on Windows 8. You can check the link below about a few changes on the time of parental control.

    Time does not

    Thank you!

  • Calendar view-only and users are unable to change the time.

    We use Windows Server 2003 R2 active directory and group policy.

    Group Policy, we blocked sytem time change but after this timetable can also test block user cannt read calander also

    pls sugget me to resolve this issure

    Calendar view-only and users are unable to change the time.

    Hi sunil77,

    Your question about changes in UAC using Group Policy on Windows Server 2003, it will be better answered by the experts in the Group Policy Forum. Please repost your question to the address provided.

  • How to view the "timer" current user time

    Hello

    How to display the "timer" right now?

    Currently I have in my program using timer, how to display the current time left on the timer to warn the user the time left on the timer?

    The number of timer upward or the countdown?

    using TimerCB

    a Council does

    Thank you

    Ben

    I'm not aware of the possibility of obtaining the hour up to what a timer callback will be called, then I would say a different approach:

    If, say, you want some action to happen every 10 minutes, but I would like to update the user interface of every second indicating the remaining time I would set the timer to 1 s interval. In the reminder of the timer, I would use a setting that is incremented each time the callback is called; If this value reaches 60 x 10 I reset the parameter and call the function to get the job done. In all other cases, you can simply view 600 - setting (in seconds) than the rest of the time.

    An alternative may be to use two counters, one for the action, called every 10 minutes, and one for the update of the UI, called say every second...

Maybe you are looking for

  • Cannot share a film at the cinema

    I use the latest version of iMovie 10.1.2 without problem. I created a movie from a recent trip and when I went to share my theater, I received the following error message: Your theater could not be opened: there was a problem to play your movies on

  • What is an overview of the link? I want just a definition, please. Not questions of others.

    I am a user of office. You keep changes to make me safer, which is good. But I really need a clear definition of your requirements. I don't know many of them. PREVIEW OF THE LINK. Taskbar. None of these bars are labeled. I DON'T necessarily know what

  • Bluetooth is not ready on Satellite P750

    I'm trying to combine a Bluetooth device on my p750 satellite and when I press on "new connection" in the Bluetooth settings I get a message "Bluetooth is not ready."I've activated Bluetooth with FN F8. In the Bluetooth wizard options, the Bluetooth

  • Where to find the manual for the Satellite 1670 disasembled

    Hello I have general problems of opening computers laptop toshiba. So far, since Sunday, I've got: 1670 return unscrewed and only open partly as it was fear could break plastic. Fixed the mouse does not now... L10 - return unscrewed and only open par

  • Windows series satellite A350D - replacement number

    Hello guys and girls. I have a problem.I have reinstalled Windows Vista on my Satellite A350D and serial number located on the sticker on the back of the laptop is not valid. Everything was ok when I reinstalled Vista 7 months ago.I had XP for six mo