followed all the instructions to copy files in the profile directory failed
all files named from the old profile are new profile when firefox look any of the bookmarks etc are displayed - what to do now?
"... "'old' files appear in the new profile but are re-created after firefox starts empty.
Sounds like Firefox cannot have been closed completely when the files have been copied, or the copy and replace files with the same name did not. Windows should have asked if you want to replace each old file with the 'copied' version, and that didn't happen to you ignored.
Or you copied the files in the profile \Local Sattings\App Data\ folder and not the profile folder OK \App Data\ - , but that would not have re-created empty files.
Tags: Firefox
Similar Questions
-
Hotmail blocked
My partners hotmail account is blocked we have followed all the instructions, but still does not allow access. The alternative e-mail account is no ideas
Hello
The question you have posted is related to Windows Live and will be well suited in the Windows Live Forum. Click on the link below.
Windows Live Solution Center
-
I get the error code: A12E1... I have uninstalled and reinstalled... I downloaded and re-installed... I followed all the instructions... I still can't get my crib request to open... He spent more than a month... Please contact me at 770-565-3280 G Robert Edwards to [email protected] ... otherwise the system is safe, and I'm going to cancel my account...
-
So I followed all the instructions on Thunderbird 'Help' in the creation of a line of signature HTML and "saved". That part went well. Then I tried to add a picture by using "Insert", then "Image"... and the image is broken. I went ahead and 'Saved' anyway, then tried to compose a new message to see if maybe it seems, but it was still broken. How can this be repaired? I would like to add a badge logo and certification to the signature after my other information line. Thank you! Fiona
Good to hear. :) Can mark you any of the messages above as a solution, maybe add that you need to click on if it was nothing else than to fix the signature of a file instead?
-
My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read suggestions?
original title: Windows Audio recordingHello
(1) what version of the Windows operating system is installed on your computer?
(2) did you of recent changes to the computer before the show?
(3) what is the file format of the files you are trying to play?
(4) you get an error message?
(5) you are able to hear the sound of Windows and other applications?
(6) that Microsoft Fixit ran?
You can try the following methods and check if it helps.
Method 1: No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsMethod 2: Problems running Windows Media Player
Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Click view all, and then click the Windows Media Player settings.
See this link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Method 3: Solving problems run Windows Media Player library
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
-
Original title: Update Configuration
Whenever I boot, I get the following: all the configuring updates step 3 of 3 15%; do not turn off your computer. He never finished the updates. I can get by launching start-up repail and restoration, but I have to do this everytime I turn on the computer.
Adding to the suggestion of Azeez, you too, try the following.
Give this one a whirl:
- http://support.microsoft.com/kb/949358> -
MS has put the "validation failed" popups on my laptop that wouldn't go away even if I followed all the steps possible to validate my software as a real. How can I go there my LT?
-
Error 80040154 Windows XP 32 bit wont let me sign have followed all the steps
I followed all the steps to repair Windows Live and it says Messenger works fine, but it won't let me sign in keeps giving me this error code. Yet I can connect if I go on Windows Live Sign in assistant, but it does not give me my Messenger. Ive had thisMessenger years and just, it started doing this.
Thanks Bob
Hello
The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/product.aspx?ProductID=2
-
I downloaded w10 and change my mind. I followed all the steps to return to w7, and I'm not not to start my computer at all.
Totally impossible to set up the computer. I followed all the step as advised and virtual repair does not work. Please notify.
Thank you.
You need to do a manual reinstall:
-
I have a new macbook pro and want to install CS3 on it. I followed all the download links. Found my serial number for my Adobe account and get up to date through the whole & get this message ' put in place has encountered an error and cannot continue, contact adobe customer support for assistance ' all I want is for CS3 to install on my new computer so I can continue to work and do not have to spend hours working it help Please. CC is not an option, because I work in a country with no reliable unlimited internet access
New computer means new problems of system operating with the OLD software means
Fix possible Mac 10.10.4 (at least for Premiere Pro) https://forums.adobe.com/thread/1891705
10.10 mac. ? sometimes has problems, often related to the 'default' permissions that need to be changed
-solution https://forums.adobe.com/thread/1689788 of a person
-
I want to change the language. I followed all the steps and I can't. Thank you
I want to change the language. I followed all the steps and I can't. Thank you
By default the creative cloud application will use the language settings of your operating system. You can find information about your current language setting is by examination of the following documentation:
- Mac OS: OS x: changing the language shown in menus and dialog boxes
- Windows 7 and 8: Install or change a display language
If you want to install the software included in your cloud Creative subscription in another language, then you will need to make this adjustment in the creative cloud application. All the details on how this can be accomplished in set the installation language. Creative Cloud applications. CCM.
If after setting the language and installation of Adobe Creative applications, you discover that they are in test mode, then it is possible that your subscription may not understand the requested language. You can find more details at the launch of products creative cloud in test on non-English operating systems. CCM, CS6.
Finally, you can check if you have a single subscription or multi-English language under you account at http://www.adobe.com/. For more information on how to manage your membership please see manage your membership | Creative cloud.
-
Audio is OK until the PP CS5.5.2 is open to all the other audio fails and PP works
This could be an Nvidia, Windows 7 64 bit, Matrox MX02, Premiere Pro CS5.5, ASUS P5E Deluxe problem or a bit of everything.
When I start the system, audio system, CDs and mp3 files work.
When a launch of first Pro CS5.5.2 audio works replaying in PP and the system of files as mp3s continue to play.
When I close Windows Media Player and re - open the audio only one that works is the PPCS5.5.2
This only happens after that PP is open.
When I reboot everything is back to normal, until the PP is open.
All the other audio fails, sound system, CD and mp3 files
The audio is routed to the Matrox MX02 with 5.5.1 drivers not the SoundMax card on ASUS P5E deluxe with the latest drivers and BIOS.
This is consistent. I have not a clue as to what is at the origin of the problem. Matrox is studying the MX02.
I use the driver with a GeForce GTX 560 Ti 280.26
Any help will be appreciated
Technical support Martrox
We have been able to reproduce the problem and reported your steps in our Engineering Department.
We will discuss the updates as soon as we have not.
Preferences
Audio output mapping on: Premiere Pro WDM Sound.
The audio material value: Premiere Pro WDM Sound
The ASIO value: speakers (Matrox WDM audio device THE)
Reader: Reader of Matrox
Table of mixing Windows - speakers (Matrox WDM audio device THE)
Remote control audio/speakers/panel Matrox WDM set as default
ASUS P5E Deluxe
Driver RealTek SoundMAx 6.10.2.6585 latest driver for W7 64-bit
MX02 audio driver 5.5.1.44
the properties of the sequence:
Sequence 01
1920 x 1080
00-03; 11; 02, 29.97 FPS
48000 Hz - Stereo
I've loaded a different sequence and changed Matrox settings accordingly. The problem remains the same.
Sequence 01
720 x 486
00; 00; 00; 00, 29.97 FPS
48000 Hz - Stereo
1080 p 29.97
Matrox AVI CODEC
Type: MPEG Movie
File size: 623,1 MB
Image size: 1920 x 1080
Frame rate: 29.97
Audio Format: 48000 Hz - compressed - stereo
Project Audio Format: 48000 Hz - 32 bit floating point - stereo
Total time: 00:02:23:21
Average: 4.3 MB/second
Pixel format: 1.0
Video shot on pixels Sony PMW EX1 Square Native 1920 x 1080 MP4 imported by PP CS5.5.2
NVIDEA GeForce GTX 560 Ti
driver 8.17.12.8026
Latest updates of W7 installed
-
Im very new to Oracle DRM and Im trying to get the configuration of the application on the Windows Server that is running SQL Server 2008. When I try to connect to the Web Client I get this error.
DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.
Can you please help
The problem is solved, reinstalled DRM and recreated the repository. the password has a symbol that causes the problem, @.
-
The problem I have is that I am running Puppy Linux on my laptop.
Now, I have tried everything I can to get Java works under Firefox, chrome, or Seamonkey (I have all three browsers on my computer).
For firefox and seamonkey, I tried the following-
Downloaded the tar.gz for java file
he unzipped in/opt/java
went to/user/lib/mozilla/plugins and run the command
ln-s/opt/java/plugin/i386/ns7/libjavaplugin_oji.so
to create the symbolic link to the plugin
check that the plugin is executable (in fact even tried to give all full read/write permission and run it)For chrome does the same thing but put the symbolic link in the/usr/lib/chromium-linux/plugins folder instead.
Restart the web browser, even tried to restart the X server where the browser runs somewhere in the background.
All three browsers can pick up all other .so plugins in this folder except Java.
When I click on check plugins on firefox I access the page on 'Missing Java? -For your safety, Firefox has disabled your outdated version of Java. Please install the latest version.
However, the version I downloaded is Version 7 9 update that is exactly the same as that which is available under the latest version of Java is (it was only downloaded from this link a few minutes before, I even tried to re - download just in case there was an update in 5 minutes).
If I go to the Java folder and run the control panel of the Java Control Panel appears, and he knows where Java is installed and everything.
So what's happening? I have installed the plugin in the right directory? I guess then that is where all the other plugins are stored and Firefox, Chrome and Seamonkey are picking all others upward fine, or would there be an old version of Java lurking around somewhere on my system, Firefox, Seamonkey, and Chrome are trying all to use it?
I also tried to download the RPM and posing in the folder/usr/java and replacing the symlink/opt/java than in the folder/usr/java and still nothing.
I don't really understand it ' cos it's picking up all the other plugins like Gecko and even installed Flash in the same way and that works very well.
libjavaplugin_oji.so is the classic Java plugin.
You need the libnpjp2.so of next generation plugin (for examplejava/lib/i386/libnpjp2.so) for current browsers. -
I bought this mobile last summer. It came with Microsoft Office Starter. I used it for about 9 months. and then I could not open all the files. I've tried everything, and most say uninstall Microsoft Click-to-Run, but it won't. I can't go to my files. So, I bought Microsoft Office 2010 and it does not open. It says click to run failed or Microsoft can not open the program. Help, someone, please.
Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
-
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
-
Moderator Forum Keith has a few suggestions along this line to
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
-
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
-
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
-
Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
`
When you get your system in good working condition, I invite you to back up your system up to an external hard drive and it puts regular periodic updates.
-
I hope this helps. Good luck.
Maybe you are looking for
-
ProDesk 600 G1 BIOS configuration of the TPM secure through the BIOS Configuration utility
We have a range of devices, computers HP desktop and laptops in our environment. Devices are all running Windows 7 64 bit and should have Bitlocker enabled, but we found that some were not encrypted. So I am trying to set up a remote BIOS and Bitlo
-
Explorer Windows has stopped working.
I don't have an error code. Explorer Windows stopped working altogether, and I have no windows on my computer. It started after installing SP 2. for vista. I have an Acer Aspire 5535-5452 and have had problems in the past with updates. I had to recov
-
Registered home page will not play dvd
Home recorded DVD won't play in Windows Media or Total Media. Store bought ones will play - but without the sound! the clues out there please
-
I have problems with my motherboards. I installed originally a jury of six core AMD Asus but discovered that the sound circuit on the Board picked up the RF of six hearts. So I changed it to a Biostar TA890FXE an AM3 Board with 4 PCIE slots. This m
-
Why connecttng signals and slots of an element of action gets segfault
I add an action item to a page. For some reasong I had to disconnect the item, delete and re-create, and then reconnect it. But I am getting exception when I try to pull the plug. If I omit the disconnection then I get exception when connecting. My c