Following a power failure, I can only open the pc in safe mode.
The computer "sounds" as if he started, but after the opening of microsoft bar, startup screen, the screen goes black. I was able to open in safe mode and have also booted from the dvd diagnostics. There is no problems identified during diagnoses are made.
In safe mode, the computer connects to the internet, but I am unable to download certain corrections in safe mode.
This problem occurred shortly after the Windows Live Essentials update. I can't remove the update.
Try a restore in safe mode point. That might solve your problem.
Tags: Windows
Similar Questions
-
Windows 7 Build 7600 this copy of Windows is not genuine - I can only run the computer in safe mode
My son - under Windows 7 Home Premium - Dec 2010 laptop, purchased at Future Shop
It has worked well for the past 2 years. Suddenly, on Saturday, he stopped doing anything.
That's happened?
I don't know, but when I started upwards, normally, all I get is the 'black screen of death", with the words"Windows 7 Build 7600 this copy of Windows is not genuine ".
I CAN'T DO anything HERE - can't make a right click, left click, CTRL ALT DEL, menu button - nothing worksSo I rebooted in SafeMode with networking - everything works fine.
I have tried many fixes - when I read the topics - but NONE OF THEIR WORK in safe MODE
slui.exe 4? Does not work in safe mode
Run? Does not work in safe mode
Start - computer - properties - activate windows now? Does not come to the top, in safe mode
However, he won't come to the top with a status or product ID
Starter - activate windows? does not work in safe mode
I tried to download the windows / microsoft / genuine / validate the tool - but guess what, that didn't work either - update installation failed - error information 0x8007043C - probably does not work in safe mode - but that's all I have As
I did a system restore - it 'worked' but ran very slow - and then when I restarted, the problem came back.
and many othersI ran Avast free on it - and anti-octets Malware - nothing - but I can only run in safe mode.
Avast has some programs that run on the system re - start - but it does not start in normal mode - if none of them workI read a lot of topics on this - and I'm VERY FRUSTRATED
I used another laptop - does the slui.exe 4 - and he asks me the activation key? I can't that - not in safe mode
I called the phone number - and talked to anyone - they told me to go through the www.howtotell.com - and report a counterfeit copy. But it's NOT a COUNTERFEIT copy.
OK - it's perhaps - but why it worked for 1.5 years? And I bought from FutureShop, so should be reliable. And I have the certificate of Authenticity on the backDon't forget - I can't do anything either in normal mode - but the Safemode with network works perfectly well.
So, I don't know what to do.
I don't think that's my problem - I bought a genuine copy, a reliable retailer.
Anything you can do to help, would be greatly appreciated.I agree with this assessment.
Hard drives come with a large number of spare sectors 'invisible' - it's only when they all well used by repair mechanisms built-in to the reader that the number of bad sectors Windows begins to increase from zero (in your case, it is a sector) means that there is already a significant degradation of the drive, and you can expect the count to start sooner or later back.
-
I can only start my computer in safe mode, what can I do?
Hello
I can only start my computer in safe mode and my security settings are turned off, what do I do?
I tried to download an anti virus scan, but it does not work?
Hello
1. what happens when you start your computer in normal mode?
2. what version of Windows is installed on your computer?
3 are you aware of any changes made to the computer, before the show?
Assuming you have Windows Vista or Windows 7 is installed on the computer,
Method 1:
Perform a clean boot and check for the issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
Method 2:
Check if your computer is configured to start only in safe mode.
a. Click Start, type msconfig and press ENTER.
b. click on the Startup tab.
c. under Start Options, uncheck safe startup.
d. click on apply and OK.
I hope this helps.
-
I can only start my computer in Safe Mode - system hangs on startup after installation of updates
Original title: UPDATES DOWNLOADED PROBLEMS to START NORMAL, MUST LOAD IN SAFE MODE - LOST AFTER 30-40 SECONDS VIDEO
After the download and installation of updates on my desktop Gateway (FX7020) the computer freezes on me and was forced to shut down hard. After a few attempts to start the computer, I was able to get into safe mode. After some time in the exploration of the event viewer I tried out and re-start of normal BONE. I was unable to make it through the boot sequence and had to shut down hard again. I waited a while and it made back in safe mode, but this time after 25-40 sec. I lost the video, the mouse, the keyboard. Everything was running. I've read a few articles and I hope that I don't have a F... THE OS.
Thanks any help will be graciously appreciated... RA
Hello
Method 1:
You can try restoring the system to safe mode and check:
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
You can consult the links for:
System restore
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restoreSystem Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Method 2:
If the problem persists, you can refer startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista -
Hi, can you help me?
After that I logged my Windows, I see that my taskbar are lost...
Windows has said, "Windows Explorer has stopped working"...
I click on "close the program".
I use the Task Manager to open explorer.exe again...
But, the same message still to come...
So, I can just open my Taskmgr programs...
What will happen to my laptop?Hello
1. What is the full/exact error message?
2 were there any hardware or software changes made on the computer before this problem?Follow the steps.
Method 1
Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.Step 1
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeStep 2
Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
http://support.Microsoft.com/kb/929135
Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.Method 2:
See the help article and check if it helps.Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.
An upgrade on the spot is the final solution before you have to reinstall the operating system.
Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.Response with more information to help you.
-
I followed the instructions for Error 80070020 to start Windows in safe mode with internet access, but Windows Update does not open when you click on it in the box start the search. Internet access is available and I can connect with other sites. However, it starts when Windows is in normal mode, but that does not help me solve my problem
To decode 0 80070522 x. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of the East of 20, the number, the Windows error.To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 20 Menu display - decimal. It will say 32.Start an command prompt (Start - All Programs - Accessories - command prompt) and typenet helpmsg 32and it will sayThe process cannot access the file because it is being used by another process.Use Notepad to search for FATAL and 80070020 in C:\Windows\Windowsupdate.log. -
My laptop keeps hitting a blue screen at startup ('a forward driver a buffer based on the stack'), I can only start it in safe mode. I want to try windows updates to see if this will help, but whenever I click on the button to update windows on the start menu, nothing happens. I tried searching for the program to see if I can open it another way, but can't find it. If I click on windows update and then nothing happened. I have windows vista home.
original title: I can't open windows update
Hey ElizabethSlater,
Try to run a full scan with the Microsoft Safety Scanner to make sure that nothing is found.
Try also to install the latest drivers from your computer manufacturer's website. If you have difficulty to locate the website of your computer manufacturer or the drivers on their page, please provide your computer brand and model in your next reply. If you have built your computer you need visit the site of the manufacturer of each piece of hardware to get the latest driver.
Once the drivers have been installed, try to restart your computer, and then test to see if the same problem occurs.
Hope that helps.
-
MPB starts only in the trunk in safe mode
Retina MBP 2012 - mi 2012 • OSX - 10.11.6 (El Captain)
I know that this is not a new issue, but I din't found a solution to internet research;
This week, since when I have ' USB drawing too much power ", and then restarted my mpb - it can only start in safe mode. I did MSC and PRVM Reset but without success.
Panic report *.
panic (the appellant 2 0xffffff802e1ce6fa cpu): Kernel trap at 0xffffff7faf638b70, type 14 = page fault, registers:
CR0: 0X000000008001003B, CR2: 0XFFFFFF813B80F274 CR3: 0X0000000031B18000 CR4: 0X00000000001626E0
RAX: 0XFFFFFF813B80F26C, RBX: 0XFFFFFF7FAF5F4BC4 RCX: 0 X 0000000000000000, RDX: 0 X 0000000000000000
RER: 0XFFFFFF81319F3C00, RBP: 0XFFFFFF81319F3E10, IHR: 0XFFFFFF813B80F26C, RDI: 0XFFFFFF8041E69900
R8: 0X000000000000FFFF, R9: 0XFFFFFF813B80F26C, R10: 0 X 0000000000000000, R11: 0 X 0000000000000001
A12: 0 X 0000000000000440, R13: 0XFFFFFF804240EA00, R14: 0XFFFFFF8041E69900 R15: 0 X 0000000000000000
RFL: 0 X 0000000000010286, RIP: 0XFFFFFF7FAF638B70, CS: 0000000000000008, SS 0 X: 0 X 0000000000000000
Lack of CR2: 0xffffff813b80f274, error code: 0 x 0000000000000000, CPU error: 0 x 2, PL: 0
Backtrace (2 CPU), Frame: Return address
0xffffff81319f3890: 0xffffff802e0dab52
0xffffff81319f3910: 0xffffff802e1ce6fa
0xffffff81319f3af0: 0xffffff802e1ec563
0xffffff81319f3b10: 0xffffff7faf638b70
0xffffff81319f3e10: 0xffffff7faeb21855
0xffffff81319f3e70: 0xffffff802e6b6148
0xffffff81319f3ee0: 0xffffff7faeb215b6
0xffffff81319f3f00: 0xffffff802e10f2da
0xffffff81319f3fb0: 0xffffff802e1c9117
Extensions of core in backtrace:
com.apple.iokit.IOUSBHostFamily (1.0.1) [79D250A3-843A-3750-BE64-A252CF17A148] @0 x ffffff7faeb19000-> 0xffffff7faeb82fff
dependency: com.apple.driver.AppleUSBHostMergeProperties (1.0.1) [401B 7165 - 36E8 - 3EE5 - 849D - 71d AEB3E46E4]@0xffffff7faeb15000
com.apple.driver.usb.AppleUSBXHCIPCI (1.0.1) [D08C7EEE-CA01-3053-8 D 47 - 2587BBCF9C9 5]@0xffffff7faf633000-> 0xffffff7faf652fff]
dependency: com.apple.iokit.IOACPIFamily (1.4) [5D7574C3-8E90-3873-BAEB-D979FC215A7D] @0xfffff f7faf5e4000
dependency: com.apple.iokit.IOPCIFamily (2.9) [F51AA3D6-EC2F-3AD3-A043-06DB79027AA2] @ 7fae97c000 0xffffff
dependency: com.apple.iokit.IOUSBHostFamily (1.0.1) [79D250A3-843A-3750-BE64-A252CF17A148] @0 x ffffff7faeb19000
dependency: com.apple.driver.usb.AppleUSBXHCI (1.0.1) [931A3E67-1954-320C-9619-C41C0A516804] @ 0xffffff7faf5ed000
Corresponding to the current thread BSD process name: kernel_task
If your Mac runs in Mode safe mode, but not otherwise, it is most likely, you have an installed extension that is the cause.
Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find the bad Apple.
-
Open the menu for Safe Mode screen, system know last good config., ect.
I just lost everything on my computer and had to install the original disc for windows XP, now system hangs in the screen where you can choose Safe mode and you should just let it keep trying its own fund it finally starts because if you choose it will freeze and do nothing as now its saying that the browser must be updated , but when I tried to update IE8 it said that 'the procedure entry point not found SHRegGetValueW in SHLWAPI.dll dynamic links library' Please help. All the disks are origional disk, Gateway computer, version of Windows XP Home Edition 2002.
Hello
I suggest make a SFC (System File Checker) scan on the system and check if the problem is resolved. Follow the steps mentioned in the article below.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Once you did check SFC scan, you are able to download Internet explorer on the system and the installation and check. Download internet explorer 8 on the system from the link below.
http://www.Microsoft.com/Windows/Internet-Explorer/worldwide-sites.aspx
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Under Win XP pro. PS 3: I can only do a restore in safe mode?
It is this way for years.
Hi 1Flyingstar,
· What happens when you try to perform a restore in normal mode?
· You get the error message?
· Are you referring to the system restore?
If you are referring to the restoration of the system, follow the steps in the article.
Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
-
I can't start my pc in safe mode
Can any one help I have a windows XP when I boot my computer I want to run in safe mode, to start, it ran windows normally or the safe mode options, but I can't move the selecter until safe mode, I think that the keyboard does not work on startup so I can't choose Safe mode no matter what knowledge is there another way to start in safe mode?
http://bertk.MVPs.org/html/SafeMode.html
(Scroll down to the "Alternative method to using the F8 key"... "But you should understand why you don't have a keyboard at that time). -
I can only open a new tab by clicking on an element to an already open tab and choose open in a new tab. Nothing else works for example file, new tab or by clicking the new tab to the right of the last tab.
Uninstall the Ask Toolbar. It can cause this problem.
- http://support.Mozilla.org/en-us/KB/uninstalling+Add-ons
- http://support.Mozilla.org/en-us/KB/cannot%20uninstall%20an%20add-on
- http://KB.mozillazine.org/Uninstalling_toolbars
If this does not resolve the problem:
- See Troubleshooting extensions and themes
- See-> Troubleshooting plugins
- See-> basic troubleshooting
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check-> http://www.mozilla.org/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
I paid for a year since December 29, 2015 and I can't open the app, they say that I can only download the trail version. But my version of trail for indesign is already expired so I can't use it.
I received an email that says that the payment has been made.
Please refer to this document for assistance:FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?
-
I can't open the ADOBE PDF file. When I try to open it, the following comment is displayed.
"We cannot open this file with ADOBE READER. This file type is not supported or the file is corrupted. This could be properly not be sent and decoded as an attachment. We cannot open the file, but can be read by the preview generator Microsoft Powerpoint. How can I open it?
Adobe/Acrobat Reader cannot open PDF files.
PPT/pptx files can be opened by Microsoft PowerPoint or PowerPoint Viewer for free.
-
Hi, back back can check files you opened with "recent files"? With my current setup, I can only see the last 10 files. Can I change the setting to display the last 20 files for example? Thank you
File management preferences is where you can change the number. I don't know the maximum.
Maybe you are looking for
-
I am using windows 7 on my hp laptop. When I try to update I get a message saying that I must have at least windows XP. Is there something else blocking my update? I tried the two update a download of the latest version. My current firefox is 13.0.1
-
Thousands of duplicate after 12.4 update songs
After installing iTunes 12.4, my library watch replica exact 7 000. I have two and music Apple and iTunes subscription Match. Everyone has noticed this problem with the new update? It's a real pain to go through and remove/hide songs.
-
Vertical black line on Portege 3500
My P3500 screen suddenly started showing a vertical black line with interference on the right hand third of the monitor. The line disappears after about 15 minutes, but still the interference. I plugged an external display that shows no display probl
-
On top of the above message says XULRunner
-
Toshiba Flash Cards has stopped working...!
HI :) My problem is:When I start my laptop an error message pops up saying: "Toshiba Flash Cards has stopped working". What is Toshiba Flash Cards? and what I will do with this error? Also, is the utility of flash refers to the Fn key card in the key