fonts Mathematica does not properly after the senior at el capitan

Similar Questions

• Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

  After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

  Help, please

  Hi Digambar,

  Welcome to the community of Lenovo!

  Please perform the below mentioned the troubleshooting for the troubleshooting steps:

  1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
  Note: All browsing history will be get deleted.
  2. If the problem is persists kindly update the playstore Google later.
  3. make sure that the update of the system is up-to-date.

  Please come back to us if the trobleshooting helped you.

  Thank you & best regards

• HP pavilion ab027tx 15: Equalizer b & o does not properly after the update of windows 10

  I've updated to windows 10. .and I have installed the latest driver realtek audio on my laptop from the HP website.

  The B & play 0 appears in the control panel and list of icons. But I am not able to change the mode(music/voice/movie) in the room B & O when you listen to music and watch YouTube etc .i have reinstalled the driver realtek audio, but the same problem appears. Please tell the solution for this problem

  It does not work when I use my headset

  Hi there @pavan_014.

  Thank you for visiting the Forums HP's Support and welcome! I think the problem you are having is your sound and headphones since the Windows 10 upgrade.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Although you had already uploaded/updated new drivers, I would suggest trying to uninstall all the drivers of its current:

  • Go to the Device Manager
  • Click sound, video and game controllers
  • Right-click on the audio driver
  • Click on uninstall
  • Restart your computer laptop twice
  • Try the speakers

  You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.

  You can find the great troubleshooting steps in document No. sound from speakers as well as resolution of the headphones and headset problems. This document contains several troubleshooting steps that may prove useful.

  Please follow provided the troubleshooting steps, re-post and let me know the detailed results of the troubleshooting.

  Thank you!

  Have a great day!

• Mail does not start after the installation of El Capitan

  I just installed El Capitan 10.11.3.  Well, everything seems to work except Mail which breaks down as he tried to upgrade.  It gives me this error message:

  "Mail must repair your mailbox information.

  Restart (the program and the computer) does not seem to help.  Here is a copy of the diary of the Console pertaining to the accident:

  2016-03-15 9:17:20.101 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.101 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.102 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.102 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.102 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.102 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.108 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.108 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.150 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.157 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.157 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.173 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.280 PM Mail [979]: layout using V2

  2016-03-15 9:17:20.280 PM Mail [979]: layout using V2

  2016-03-15 9:17:22.469 Mail [979] PM: SQLite error (error disk i/o) 10: upgrade running query

  2016-03-15 9:17:23.536 PM Mail [979]: layout using V2

  2016-03-15 9:17:23.536 PM Mail [979]: layout using V2

  2016-03-15 9:17:25.591 Mail [979] PM: SQLite error (error disk i/o) 10: upgrade running query

  2016-03-15 9:17:27.652 PM Mail [979]: layout using V2

  2016-03-15 9:17:27.652 PM Mail [979]: layout using V2

  2016-03-15 9:17:29.718 Mail [979] PM: SQLite error (error disk i/o) 10: upgrade running query

  2016-03-15 9:17:29.718 PM [979] Mail: [+ [MFLibrary executeBlock:isWriter:useTransaction:isPrivileged:]] SQLite 10 error: upgrade running query

  2016-03-15 9:17:29.718 PM [979] Mail: [+ [MFLibrary executeBlock:isWriter:useTransaction:isPrivileged:]] SQLite 10 error: upgrade running query

  2016-03-15 9:17:58.995 PM Mail [979]: layout using V2

  2016-03-15 9:17:58.995 PM Mail [979]: layout using V2

  2016-03-15 9:18:05.718 PM Mail [979]: copy of /Users/ [USERNAMEREMOVED] / Library/Mail/V2/MailData/envelope Index [USERNAMEREMOVED] /Users/ / Library/Mail/V2/MailData/envelope Index-8 failed with 10: disk i/o error

  2016-03-15 9:18:05.728 PM Mail [979]: layout using V2

  2016-03-15 9:18:05.728 PM Mail [979]: layout using V2

  2016-03-15 9:18:05.738 PM com.apple.xpc.launchd [1]: (com.apple.mail.50592 [979]) Service came out with abnormal code: 1

  Can someone tell me how to solve this problem?

  The new version of Mail stores its database in a different format that the old, so the database must be converted before Mail can use it. Sometimes, the conversion fails because the old database is damaged, or because of a bug in the conversion code.

  What you should do depends on what type of e-mail accounts you have. The first step, no matter what you do, is to save all the data, if you don't have a current backup.

  Please read this post in full before anything else. If this is unclear, ask for clarification before taking a step. If you're not convinced that you can follow instructions, stop, don't change anything.

  A. Si you know that you have IMAP or Exchange only e-mail accounts

  The easy way to recover is to delete the old database and start over. You can do this without losing all the messages, provided that:

  ☞ All your incoming mail accounts are on an IMAP or Exchange Server

  ☞ You store messages sent on the server

  ☞ You have no mailboxes "on my Mac".

  Independent mail services the best-known as iCloud and Gmail are inspired by the IMAP. On the other hand, hosted by ISP e-mail services often use pop. If your ISP is one of your providers of mail services (or the only), you cannot use this procedure. See below part B in this case.

  If the above conditions are met, please continue to do so.

  Quit Mail runs.

  Open your home folder's library folder by pressing the option key and selection

  Go ▹ library

  in the Finder menu bar. Inside, it is a subfolder named "mail". Move this folder on the desktop. You do not move the e-mail application; you move a folder named "mail".

  Launch of Mail. The mailboxes must be restored automatically. The messages will be downloaded from the servers, so it can take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and which can be a problem if the bandwidth is measured or the Internet connection is slow.

  If the mailboxes are restored successfully, you can delete the folder that you moved to the desktop. You may have to re-create your rules, signatures and custom stationery Mail. If it's important for you not to have to do these things, ask for instructions before you delete the folder.

  B. Si you have a POP or "on my Mac" mailbox store, or if you don't know what you have

  Move the folder of mail on the desktop as in the part has and open.

  Press the key combination command + F to search. In the line of chips to search along the upper part of the window, select "Mail". Below, defined as the search criteria

  The name ends with mbox

  Results of the research will be a list of folders with a name ending with '.mbox '. Each of them represents a box the letters.

  Launch of Mail. All mailboxes will be empty at the beginning, but if you have any IMAP or Exchange mailbox (including iCloud), they should fill in automatically after a delay, as in part A. If you have now all the messages you want to keep, you can stop here. Otherwise, import from mailboxes in the search results. The article of support related, select

  Apple Mail

  as import format. You'll probably want to jump boxes to letters with names such as "Deleted Messages", "Junk", "Spam", or "Trash". Some may be duplicates of what you already; those that you can remove.

  In some cases, a mailbox may fail with an error to import. If this happens, thanks for posting your results.

  If all the mailboxes that you want to import do successfully, you can delete the mail on the desktop folder.

• Mail does not start after the update of EL Capitan 10.11.2

  Many applications do not work (do not start) after my Mac Book Pro with El Capitan 10.11.2 update:

  -Mail

  -Time Machine

  -App Sore

  How can I fix this?

  -First data backup. Since you said TM does not work you will need to use another method

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable, reinstall the OSX. Nothing shall be lost.

  How to reinstall OS X on your Mac - Apple Support

• Email does not work after the installation of El Capitan?

  Cannot send or receive e-mail after the download and installation of El Capitan. I have an account error come, who says "cannot connect". When you open "Connection Doctor" connection status: Mail was abel to connect to internet. Each account is "trying to connect to this POP or SMTP account failed. Verify that the user name and password are correct. They are. Can you help me?

  You have more than one e-mail account, and if so, they all do the same thing?

• Acer X 1930 works does not properly after the factory restore

  It did not work correctly since the restoration of my desktop Acer X 1930 under Windows 7. Now, it shows: "configuration of the Windows updates failed. Returning from the changes.

  Could someone please help?

  Hello, I had problems even when I went back to 10 Win7... The only way I could make it work just is for the first few newspapers in I had to restart my system rather often. I know that this is not a SOLUTION but is what I did...

  Load Windows 7, let the updates for about 3 minutes... I first tried 8 mins but still many updates. So 3 works for me... I am also connected on wire on a Giga lan with Ultra fast connection to my ISP... So time could vary for you...

  After 3 minutes, I had 20 to 26 update ready to be used. Restart the computer. They worked. Makes about 3 times. ON the 4th time I down load 90 updates to see if it would work. And he did very well. Then after that, I went to look at the missing updates to ensure that they were going to update or had... added some that were OPT... on on the last 50ish and they have all updated very well. But for some reason, if I let all try them and update from the beginning, they would fail. I think it's because they have tried to put in the updates before others will want that needed to be done first...

  I do not work for Microsoft or Acer and it is only first hand from one of my systems. This isn't a fix only my way to make it work.

  So if you have a connection interent fast and no more wireless I would say that for the first time you start your computer just let it run for a few minutes then go to the Start button and restart so you do a little at a time...

  I would like to know how it works for you...

  James

• NVIDIA gforce9500 gt does not properly after the to...

  Hi I m using vista family basic n my graphics card is nvidia 9500gt it was work propely for months, but when I update the nvidia windows update driver it will restart in an instant the problem is that the computer works normally but the screen shows blue dotted staright lines I have reinstall the driver but nothing won't be going on so please help me...

  Hello

  Remove ALL power and remove and reinsert the card - are not only well adjusted. Be sure to operate fans and
  clean the dust bunnies. Check the range of cables for the video card and monitor.

  Check with support from Nvidia, their drivers live and ask questions in Nvidia forums about known issues
  with this card.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  Hope these helps.

• BlackBerry App Whatsapp works does not properly after the upgrade of the operating system 10.3.1.1565

  Hello

  After upgrade to OS 10.3.1.1565, I have problems with Whatsapp: when I get pictures, they download more in the photo folder and even I can't open them Whatsapp. They just stay inside the talk of whatsapp fuzzy mode. Advice to solve this problem?

  Thank you and best regards,

  Chris

  On my side, suddenly this problem disappeared... without do me whatever. Strange, but at least it works.

• Liquefy tool does not properly after the update to Photoshop CC2015.1 [was: problems with the Liquify tool]

  When using liquify tool get w square pixels with change on a mask hiKey, don't know how to get rid of

  Hi josuep,

  Please see this link for the same problem: Photoshop CC 2015.1 liquefy clear result

• my wireless keyboard does not work after the upgrade to El Capitan

  I have a wireless trackpad, keyboard, and mouse connected to the iMac of 2013. Everything works fine until I upgraded to El Capitan a few weeks ago. Whenever I wake the system from standby mode, I am unable my password key using the keyboard. The keyboard no longer respond or begin typing the characters on his own.

  So I did a little research on the Internet and discovered by turning off the wireless trackpad will solve the problem. So I tried and yes it works. But it also means that I have to turn off my trackpad whenever I need to connect using my keyboard, which is not the best solution. And my keyboard and trackpad have always been placed side by side, works perfectly well until this upgrade of the OS.

  Does anyone have a solution to this?

  Thank you

  Have you tried to remove the keyboard and the trackpad of Bluetooth devices in the bar of Manu. Then allowing them to be discovered again.

  (You may need to hold down option when you select Bluetooth)

• My internet does not work after the installation of El Capitan 10.11.3.  Help, please!

  I upgraded to El Capitan 10.11.3 tonight and now internet will not work.  I can't connect to the app store either.  I can connect to wifi but safari says "Safari cannot open the page.  Safari can't open the page "https. ' / / www.yahoo.com/.  The error is "the operation could not be completed.  Operation not permitted. (INSPOSIXErrorDomain:1) ' can someone help!

  Thank you!

  Hi SmilingDaddy

  Here are a couple of things to try. Here I am assuming you are using a wireless router?

  Open system preferences > network

  The name of your network appears in "network name"?

  Click on the button "Advanced...". »

  In the WiFi list, make sure that your preferred network is at the top of the list.

  Click on the TCP/IP tab and click on 'Renew DHCP lease'

  Now you have Internet?

  Try turning off WiFi, either in the same pane of network, or by clicking on the WiFi icon in the menu bar. Then wait a minute and put it back on.

  If you hold down "Option" key and click the wireless in the Menu bar, you can click on the 'open Wireless Diagnostics... '. "There is also info even before making it on the signal strength, etc... WD can give you help and additional information.

  Let us know if it works and if not, please give any info you can. Are you using WiFI? Are you using a cable/DSL Service? What model of iMac?

  Hope this helps, Greg

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software