FOR ADMINS - how to choose the right answer on a thread on this forum?

Similar Questions

• HP pavilion 15-e034tx: how to choose the right RAM for laptop

  How to choose the right RAM for my laptop (Pavilion 15-e034tx). I know I should buy DDR3 ram.

  Are there other factors should I consider when buying one? I got 2 slots for ram, which od these combos are possible?

  1-4 + 4 GB
  2-4 GB + 8 GB
  3-8 GB + 8 GB

  Thank you

  From the Manual:

  Two customer accessible/upgradable memory module slots

  Support for dual channel DDR3L (1600 MHz)

  Support 8192 MB RAM system in the following configurations:

  8192 MB (8192 MB × 1, × 4096 MB 2)

  Manual download link

  See page 53 for instructions. Memory access is easy via the service Panel. This is the part number for the approved 4 HP concert module:

  4 GB (PC3L, 12800, 1600 MHz) 691740-001

  http://www.Amazon.com/HP-691740-001-4GB-1600MHz-PC3L-12800/DP/B00CI08FX4/ref=sr_1_2?ie=UTF8 & qid = 1451655870 & SR = 8-2 & Keywords = 691740-001

  A 8 GB module is listed in the manual, and it's a 3rd generation of processor i5 I suspect 2 x 8 = 16 concerts would work, but strictly following the manual your only option is to add a 4 GB for a total of 8. Most users really not more 8 GB and adding a second identical module will allow two-channel operation, so you should see a noticeable jump in the overall performance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• 4540 proBook s: how to choose the right network driver

  Hello guys. I clean installed Windows 7 Professional. Now, I see that I can not connect my computer to the internet, so I need to install the network drivers. I wen to the HP website and saw that there are 19 different network for my laptop drivers.
  How to choose the right method?

  Hello:

  Below are the links to the ethernet and wireless drivers you need...

  Wireless:

  This package contains the installation package driver for Ralink wireless LAN controllers in the laptop models running a supported operating system.

  File name: sp66089.exe

  This card also needs a bluetooth driver...

  This package contains the OS driver installation package for the Ralink Bluetooth in laptop computers running taken in charge.

  File name: sp59632.exe

  Ethernet:

  This package provides the driver for the Ethernet Realtek controller in the laptop models running a supported operating system.

  File name: sp63213.exe

• How to choose the right settings in pre 10 for videos I have?

  I have Adobe first items 10 and you want to edit videos that I had received from a company that has transferred my Super 8 videos in format digital and saved on an external hard drive. They have the extension avi, codec Apple Motion JPEG A, image size: 1920 x 1080, pixel aspect ratio: 16:9, FPS: 29.97. I don't know what settings to choose from for the best image quality. I tried a few and the quality is poor. I need help. Thank you

  Editing,

  You HAVE found the right forum, and John and Steve are on the problem.

  Now with MJPEG images, I normally recommend this ARTICLE (from the subforum tips & tricks), but you have a somewhat unique problem, because your film contains a specific CODEC, the Apple Motion JPEG CODEC.

  Are you on a Mac or a PC?

  I don't know if Apple QT Player installation also adds the Apple MJPEG CODEC, as is Apple's CODEC H.264 and a little more. If so, you should have the appropriate CODEC. Also, I don't know if Mac come with Apple MJPEG CODEC installed. Others will have to answer these questions. I have four MJPEG CODEC on my laptop. One was the MainConcept, I bought, installed with Canon G-10 my wife installed with its Lumix, and then there is another, which has probably been installed elsewhere. None of my friends (I have Apple QT Pro on the laptop) appear as Apple, but that last one might be

  Can I change hardware MJPEG well enough (not as gently as SD DV - AVI, but still good enough).

  Good luck

  Hunt

  PS - for telecine work, I got the 8 mm/S - 8mm digital images to tape miniDV (harder to find telecine houses, what to do now) and only use my Canon camcorder to capture those tapes on FireWire in first. Which works very well.

• How to choose the right project settings?

  I am new in taking video and modifying them. I bought a Sanyo Xacti HD camcorder and a lot of clips in my last trip. The clips are transferred to my count and have the format. Depth of MP4 1280 - 720 1280 and 29.97 frames per second.

  I want to create after having been released on DVD I can show on my TV 16:9 (PAL Netherlands)

  When I create a new project, I choose the seetings and I don't really know how to choose!

  Should what project settings I choose in the settings I see that 30 fps under NTSC systems. Is there somewhere a general explanation how?

  Help will be very appreciated!

  Greetings Willem

  Before the NTSC in PAL, I think that there are other major considerations.

  1. you save the 16:9 720 p 30 1280 x 720 at 30 frames per second, using the MPEG-AVC/H.264 codec). Seems to me you are dealing with what they call "AVCHD Lite". If so, there are major problems of basic editing in first Elements 7. See the FAQ of Steve Grisetti

  http://forums.Adobe.com/thread/454585?TSTART=0

  2. your comments suggest that you want to create the widescree of DVD-VIDEO (16:9) of your timeline.

  3. so, first and foremost, I would determine if you can successfully bring your video in Elements 7 first and export the DVD-VIDEO in NTSC system, before thinking on the conversion of a video NTSC a PAL end product.

  4. as a general rule, you select the preset of the project (new project dialog box) to match the properties of your video. Once done this will not stop you changing predefined export later. In the case of your NTSC by Sanyo 720p30 video, I suggest the project (new project dialogue box) = NTSC HDV HDV 720p30 preset. Think the project defined by default as a template from which you can edit your video. Although this 720 p is a variant of AVCHD, I would suggest the HDV category since there is no preset under AVCHD 720 p. Note that the descriptions on the right which you have set the preset.

  5. in Share/disc/disc, in the dialog box burn, and then select the preset: NTSC_Widecreen_Dolby DVD. If it's all completed successfully, then we can talk about conversion of NTSC 1280 x 720 16:9 for a DVD VIDEO PAL (720 x 576 25 fps with a flag from 16:9 to stretch the video on screen after the encoding).

  6. you can find the following link helpful:

  http://www.Camcorderinfo.com/content/article_converting_ntsc_pal.htm

  RTA

• How to choose the right version of publishing app when you choose to change the image of in InDesign?

  Hi all

  Normally when I want to edit a picture that is in a page layout in InDesign either, I press option-click on the image, or ctrl-click on the image and choose to edit using the CC of Photoshop, Illustrator CC or another app I need to use at any specific time. Well, I also have backups will only backup my entire system and so all my applications get saved as well.

  Well, what's happening now (for today) is that when I choose to edit the image, it is opening Photoshop (or Illustrator, etc) from my drive backup and not within the app on my main drive. So, even though I already have Photoshop open as I work in InDesign, when I try to edit an image it will open the copy of BACKUP of Photoshop AS well I tried to choose 'other' when ctrl-click on the image and choosing to Ed... but when I navigate to the here where Photoshop is on my main drive, I can't choose the main application because it appears to show the main application of Photoshop as a folder with the that there is content packaging.

  How the hell can I fix the path to the correct version of Photoshop, where I need to do the editing? I must now go to things a way hijacked by browsing up to where the image is in the finder (via ctrl-click on the link of the image in the LINKS Panel and choose "show in finder"), but it takes twice longer :((, it wouldn't be so bad if I didn't have as many images as I work with that I'm doing now.

  Any help or advice will be appreciated :))

  Thank you kindly,

  Christine

  Just guessing...

  The problem is if Photoshop CC on the primary drive is open? If this is not the case, consider set to open at the start of the computer. The current instance might prevail over those inactive.

  Usually, the installed in last instance of an application is the one linking operating systems (OS X & Windows) with a document file that calls for the application, for example, by double clicking in Finder/Explorer. It is common to see the new version called (say CC Photoshop rather than Photoshop CS 6) because the new version is usually the last installed. Because Adobe CS applications typically install new versions of common files, it is recommended to install releases in chronological order, if it is necessary to reinstall the applications when there are multiple instances on the same computer. For example, to install Photoshop CS4, and CS5 and CS6; If an earlier version is installed when a newer version is present, the previous common files can cause application problems. One consequence of this is normal, but sometimes annoying, behavior that at the launch of an application by throwing one of his files, the new version is open because this is the functioning of the operating system.

  In your case, it is possible that the operating system sees Photoshop of the backup drive installation the new installation and lance. Perhaps to save Photoshop CC makes this instance appear most recent for the operating system. Remember to leave Photoshop CC out of the backup operation. If it works well! If this isn't the case, you may try to start the computer from the backup disk, run Photoshop, then exit and restart the computer from the main drive. If this solves the problem, maybe try to start from the backup disk, then reinstall Photoshop top and then restarting the main player. If it works, it can "keep", or an operation like backup, could reduce to naught all your smart stuff.

  Maybe one of these strategies may be a permanent solution.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• How to choose the right Dell equipment

  If this is in the wrong forum, I apologize. I didn't know where to post this.   I'm trying to determine what conputer would best serve my family but when the "generation" computer's "help me choose" function was not helpful to say the least.   I'm leaning towards an Inspiron 530 but did not make a final decision.  Can someone give me an idea how to make a decision on what is best?  For example, how can I determine the best processor for our needs?

  Thanks for any help.

  The main question to ask is "what do you plan on using the computer for?

  If yout main use will be internetting, emailing so your system specs can be much less

  IF you want to gaiming and video work you will need a powerful system more.

  Tell us what are your terms of use and we can provide more advice.

• How to choose the right photo-album

  I want to use pictures for my video. I have four different albums. FCP X shows pictures of the only album (and not the good).

  What should I do to choose the good album (and photos)?

  In Photos-> preferences, click on use as Photo library system.

• How to choose the right layer just pointing?

  I have a file with many layers (a composition with lots of different hidden items and comped together) and used the V tool by pressing Ctrl to select the appropriate layer.

  After organizing my layers into groups, which no longer works.  Pointing takes me for the Group containing the layer I want, and I still have to understand that, in the old-fashioned way (toggle visibility on all of them until this I find the right one).  With nested groups, it is even worse, and the point function is totally broken.

  I noticed that point function has had some other good improvements: it shows the contours of layers and a few numbers when the ctrl key is pressed.

  So, is there a more refined way to use the feature to make it useful again?

  OK, it seems that changing the radio button in the group to the layer, is what I wanted.  Leaving the AutoSelect deselected. the option is separated from him is no not part of this, as it seems.  The ': ' at the end makes it appear that the option right applies to the function on the left and means nothing without her.

  Regarding right-clicking, which gives a long list of everything, and not just what I could be pointing.  Too bad, it would be a handy feature.  Right-click to change diapers doesn't help if I only know the name that is on the photo: the 'hard' is to toggle the visibility up to this I find, and which is no longer available in the layers panel.

• How to choose the right Version of the JDE?

  Im a little confused here.

  Im trying to develop applications for blackberry OS 6.0 phones, but the eclipse I download contains the version 7.1 of JDE.

  https://developer.BlackBerry.com/Java/download/?OS=Windows#Eclipse

  So if I use it I would be able to create applications for any OS of 5.0 to 7.0?

  Thank you

  No, in order to work in OS 5.0, you must use the SDK for 5.0 or an earlier version.

  For example, to work in OS 6.0, you can use the SDK to SDK 6.0 or 5.0.  You can use the SDK for OS 5.0 because the SDKs are compatible before at the latest (higher) OS versions.  But 7.1 SDK is not compatible with the previous (fewer) levels of BONE.

  Clear now?

• How to choose the right number of VMs for an application?

  Hello:

  Our society needs to install Project Server 2007 on a server of ESXi4 and told me to use 2 virtual machines: an application server and a database server. But my question is:

  -If the two machines will be installed on the same server, and that these machines will be used exclusively for Project Server, so why use 2 virtual machines instead of using a single with more ram and put in place the database server and the application? Y at - it a gain by using two virtual computers instead of one?

  Thank you very much

  Concerning

  Carlos Negroni

  I have not used in Project Server, but I had similar problems with Oracle at the same time. It's that we have to separate the server database from the application servers as we have done in the physical world. What it came down to us has kep application as separate VMS servers. It makes it easy for the application fixes and performance as Oracle worked better with separate servers. Even if they have been virtualized or not, I think that they should always be regarded as separate servers (VMs).

  www.phdvirtual.com, manufacturers of esXpress

• How can I give credit to the right answers to two of you who helped?

  Dear Hunt and Steve G,.

  The two of you have helped me on my intial posts two and I want to make sure you got two credit for the right answers. Can I do this?

  At present, there are three possible awards of aid:

  There are two answers to "Fairly useful" 5pt and one "Correct" answer of 10pt.

  Also mark the question as 'Response', but the OP can do, without awarding any points to anyone.

  Personally, the most important of these functions is the 'response' indicated to others, who might have the same or similar problem, the answer is in the thread. I ask still posters to return to their son, with updates, and a report on what he has worked for them, even if this resolution has come from another forum. The functions of the forum at two levels: a messages with a problem and I hope it gets resolution. Then others come, will search and find something similar to their problem and read maybe the answer in the current thread and never need to post. Third, much, me included, come to the forums to learn something, if a thread on a problem I've ever known, or material I've ever used, or workflow I've ever known, can teach me new things.

  In regards to the 'rewards', most of us do what we do, to help others, and this is the reward. A "thank you, that worked," is what motivates us. All points are lagniappe.

  Hunt

• Choose the right model of project

  I'm pretty handy with Primere Pro CS5 and a bit with After Effects.

  Usually of digital HD work.

  But when it comes to formats, well, it's something that I need to focus on learning.

  I have a DCR-HC21. Records on Mini-DV tape.

  I have a lot of videos I want to transfer them to DVD.

  I am able to import video from the camera using firewire, in first Pro CS5.

  However, I want to be sure I chose the right settings when

  initially implemented for the project. For the best quality.

  Any help would be great.

  Try this:
  
  warning

  And to better understand what is happening, look at this:

  How to choose the right sequence settings?

  Edit:

  When you create a new project you are presented
  with a setting of the sequence to the choice menu.
  You can skip this step by pressing "Cancel", then import your media
  and create the type of sequence that best adapts to your images.

• Mr President I allowed Adobe Illustrator and photoshop for the windows version, but I also needed Mac version. How can I get the mac license. Please give me the right answer. Thank you, Sir, I have the license of Adobe Illustrator and photoshop for window

  Mr President

  I allowed Adobe Illustrator and photoshop for the windows version, but I also needed Mac version. How can I get the mac license. Please give me the right answer.

  Thank you.

  Shaji Samuel

  Hi Shaji, please see: a product for another language or version of trading platform

  I hope this helps.

• Choose the right paper for the job

  Printing photos at home is a convenience that can save time and gas money. But sometimes printing comes out dull and faded and you know that the cartridges are fine. It might be the paper being uses in the printer that may be the problem. Learn how to choose the photo book of right for the work to achieve sharp and vibrant images. This link covers everything from how to choose the correct size paper to do the job and to fit the image.  It also has a chart that shows what that finish and best suits the event and then you try to look just as it should. Do it right the first time can not only save time; but too much ink!  Here is the link: http://www.hp.com/united-states/consumer/digital_photography/buying_guides/how_select_paper.html?jum...

  As always, I hope the community finds this information useful.