For driver Brother HL-1230 pour windows 7-64 k
I have a printer brother HL-1230 with USB cable. No driver for Windows 7. How can I use qd this printer? Thank you
Hello
Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: Thank you
http://support.Microsoft.com/common/international.aspx
Tags: Windows
Similar Questions
-
Driver for my Brother hl 1230 series on Windows 7 64 bit
Hello
I spend hours looking for a driver for my Brother HL 1230 series that would work on my laptop Windows 7 64 bit, but I couldn't find. Is anyone of you know on one?
Leonard
There are no drivers to download for your printer from the Brother's Web site. Instead they suggest to use the drivers built into Windows 7. Please see here for more details
If you have any existing brother installed the drivers for your printer, it is a uninstall tool, you will need to use:
-
Can I use my printer Brother HL - 1230 on Windows 7
We just bought a new Dell with Windows 7 hard drive. Is it possible that I can use our printer brother HL-1230 with this set up?
The site of the center of compatibility Windows 7 here:
indicates that your printer is compatible with Windows 7. However, this thread:
can be useful. A poster reports success using the Vista drivers from the Brother's Web site.
Note: I recommend manually create a system restore point before proceeding if you decide to try.
-
Problem install driver Brother MFC 8300 (using Windows Update)
I need help for my printer to work with a new installation of Windows 7 Home Premium 64-bit. I had to reinstall due to a CMOS error, I think it was because of a dead battery. It could even be something else because I had other problems with this facility (explained below). In any case, the printer is a former Brother MFC 8300 (he was a workaholic!). Past times, I have re-installed Windows, there have not been any problems with this printer. I just install Windows Update driver (the driver is named 'Brother MFC8600/9650 Series' in Device Manager). But this time the installed "Windows Update" the driver and says that everything is working properly but when I go to "Devices and printers" it does not appear in "Printers and faxes" (as he usually does). FYI, there is a list for "USB Composite Device" in "Devices" that shows "Brother MFC8600/9650 series" as a scanner. Don't know what that means.
I also tried to manually download the driver of 'catalog.update.microsoft.com '. I downloaded 2 different versions of the driver. It has a size of 2.0 MB file and the other has a 2.3 MB file size. I found myself by installing do not either because I didn't know where the appropriate destination location has been using the 'Expand' of the 'Command Prompt' command with "expand
-F: * " ." I think that the file for the "Windows Update" file size is 2.1 MB (my memory is not the biggest however).I am running as a "Standard user", but I installed all the drivers of devices as an administrator. I also noticed a problem with an application that I used before this re - install, "Ultracopier. On installs previous he has installed fine and he demanded 'Administrator' rights after the start. But during this installation, it did not work at all and did not 'Administrator' rights after the start. I also had problems with a 2 to external hard drive related to the permissions and access to certain files and folders. I don't know if any of this matters but I thought that the more information the better.
I hope someone can help me with this because I really need this printer to work.
Hello
Sorry for the late reply.
I suggest that you restart the Printer Spooler service and see if that fixes the problem.
A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.
Please follow the steps below:
You must be logged on as administrator to perform the following steps:
- By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
- Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- Right click on the print spooler service, and then click Properties.
- Under the tab general , next to Startup type, make sure that Automatic is selected.
- If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
For more information, please see the link below:
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
If you are still facing problems while using the printer, I suggest to uninstall the driver again and install all the optional updates offered by Windows Update and then install the printer drivers if not included in the optional updates and see if the problem persists.
To install optional updates, follow the steps below:
- Press the Windows key + R
- Type wuapp
- In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer
- If updates are found, click on view available updates.
- Select the optional updates, and then click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Hope this helps, get back to us if you need further assistance for Windows.
-
Update driver Brother MFC 210 c - window 7 Home Premium
Hello
I just updated my computer from Windows Xp to Windows 7 Home Premium. I can't find the dirvers for my Brother MFC 210 c. I even drive, but the computer does not hired the legacy. I think the printer works on 32 bp as opposites tp 64bp. I used Windows update to see if my printer would come to the top, but it didn't. Can someone help me?
Thank you!
Hi AleDeb,
I had the same problem and spent the last 2 + hours to understand. After much research I could not find a driver specifically for Windows 7 so in my frustration, I downloaded the driver for Vista and it worked. You can find it here: http://welcome.solutions.brother.com/BSC/public/agreement2.aspx?c=us&lang=English&prod=mfc210c_all&osname=win_vista_x64&viewmode=0&guid=11a8160e-fb29-4c94-bce4-d88bc89e3cbd&dlid=dlf003430&flang=8&dlfileseq=2. Click on I accept and save it somewhere where you will be able to find it. After it downloads the file, open it and extract it. It will save you all that is in the same place. Then, go to the--> hardware control panel and sounds--> devices and printers. Click on "add a printer". After that the printer is highlighted and click Next. He will try to find the driver automatically but will not be able to. After a failure, click ok, and navigate to the location where you have unpacked just the files. It should work. It worked for me. Let me know if it works for you. Good luck!
-
driver webcam creative M6 pour windows 7
I would like to know if exists a creative webcam M6 pilot pour windows 7
Hello
Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
-
Where can I find a Windows 7 64 bit for a Brother HL-1250 printer driver
I have an old Brother HL-1250 laser printer. When I got my new computer it came with Windows 7 64 bit installed. I plugged the printer, Windows recognizes the new device, downloaded the drivers and installed the printer. It worked fine for about a year. Then, a month ago, I tried to print with it in Excel and Excel told me it could not connect to the printer. I tried all Microsoft diagnostics and they did not help.
I decided to uninstall the printer and reinstall it. I first tried to install through Windows Update search a new driver. Who has failed, I got was a cryptic message that says "Fail", without further details. Then I tried to reinstall using the existing driver and got the same cryptic "Fail", once again with no details. I went on the site of Brother, he said brother has no driver, you have to get it from Windows Update. I went to the support for Windows 7, this site says to get the driver of brother. I did a search of the Knowledge Base and he set up a generic PCL driver he said would work. I downloaded and tried to install it, but it is 32-bit and windows wouldn't install it.
So I'm puzzled. Anyone know where I can get a driver 64 bit Windows 7 for the Brother HL-1250, or why the print has stopped working in the first place? TIA
Have you tried this driver?
-
I'm looking for the driver for canon cp400 pour windows 7
I'm looking for the driver for canon cp400 pour windows 7
Hello
See this page to select your language:
http://support.Microsoft.com/common/international.aspx
====================================
Or sorry that it is area English.
Left click at the bottom of the Microsoft Community page
English and set your language.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I neeed a driver for a mzn505 installation run on windows 7. Is it available?
I need a driver for a mzn505 istall work on Windows 7. Are available?
Hi Jeff,
Welcome to the community of Sony!
Drivers are not available as this Walkman player is not compatible with the Windows 7 operating system. You can use the mini stereo cable to connect the computer Walkman player and can transfer files.
Thank you for your message.
-
Need a printer driver for a HP Photosmart 2710 on Windows 8.1 RT 32 bit.
Hi lt12345,
I understand that you are looking to use the Photosmart 2710 with Windows 8.1 RT, but are unable to find a driver. In my attempt to find a driver, I've come empty-handed. It seems that this printer is not supported for printing from Windows RT.
Sorry to be the bearer of the bad news. Kind regards
-
is driver for canon pixma mp800 included with windows 8?
is driver for canon pixma mp800 included with windows 8?
-
Hello. I'm looking for driver for ACPI\HPQ0004\3 & 33FD14CA & 0
I replaced the HDD with a SSD from X 25 - m Intel and replaced Windows Vista with Windows 7 Ultimate X 64.
It is the only unknown device I have. I've searched the forums and found solutions for Windows Vista, but not for Windows 7.
Anyone?
FranKeRS76
Hello:
If this isn't your quick launch buttons driver, then it is probably the ProtectSmart HDD driver that is missing.
Quick Launch buttons driver:
ProtectSmart Driver:
Paul
-
new hard drive for laptop computer tried to install windows XP
Just fitted new hard drive for laptop computer tried to install windows XP, continues by saying can not find any hard disk. any help would be appreciated
Hi JohnJelf,
· What is the brand and model of the laptop?
· What is the full error message?
· The new hard drive detected in BIOS?
I suggest you to contact the manufacturer of the laptop computer for more help and information.
-
drive is Matshita DVD-RAM UJ-850 s a SATA drive
I use windows Vista
Driver provider Microsoft
Day 21/06/2006
Version 6.0.6002.18005
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Need driver for printer Samsung ML-1520 on Windows 7 Ultimate
Need driver for printer Samsung ML-1520 on Windows 7 Ultimate
Is your Google broken?
http://www.Samsung.com/UK/support/model/ml-1520/XST
Unlike a PCL or PostScript driver, a GDI printer driver based on Windows to do the printing. See http://malta.oki.com/support/printer/troubleshooting/detail.aspx?id=tcm:179 - 140786-16
A "universal printer driver" is often provided by printer manufacturers when they do not want a printer driver for specific printers. It allows printing in a variety of printers from the manufacturer, but perhaps not all of the features that includes a driver specific to the model.
Maybe you are looking for
-
Firefox now "reads a page in the future" for WordPress sites?
Hello I just noticed something weird in Firefox 26.0. With the help of a violin, I see that when I review WordPress sites, the browser asks an extra page (only the source page, not the links on the page) that I want to. Indeed, it seems to be the nav
-
MY time capsule 2 TB is is no longer under tension after 14 months. I changed the power cord and made sure that the work of output and still no power. Is it possible to fix it?
-
Why is a USB to reduce cable included with 4 AppleTV?
It doesn't have a Lightening port on it. I must be missing something?
-
Windows don't mail not send and receive some
Windows don't mail not borrowed with att.yahoo port, Server error message: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] wrong username or password.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC
-
Pravilion HP P7-1235: WIN10 stuck in boot loop
I started with Win7 has accepted the update free for Win10 and it worked great for awhile, then he said, one day I got i/o device error and continued to work... maybe two days later a blue screen appeared 'Death of critical process' and he did it...