For HP LaserJet 1320 printer cable

Similar Questions

• A LaserJet 1320 printer network connection

  The HP LaserJet 1320 printer lacks an Ethernet, only the 1320n, NT and nw models have that.  My question on this is can I connect the 1320 to my Ethernet system using Ethernet to USB converter unit? The 1320 has a USB input/output.connector.  If not, is it because the current software does not support the Ethernet connection, and if this is the case the software update?  In this application, I want to be able to use the printer HP 1320 of my laptop HP Pavilion DV7-1267 also connected to the Ethernet system.

  It is possible to install the HP LaserJet 1320 to an Ethernet network via a Jet Direct external print server.  Support direct Jet models can be found at the following URL:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=115&prodSeriesId=410622&prodTypeId=18972&prodSeriesId=410622&ObjectID=c00229696

• LaserJet 1320: Print multiple copies

  Regardless of the number of copies I specify to print on my Laserjet 1320, it will only print one copy. I use Word 2010, Windows 8.1

  I suspect that the following is the case:

  • Your document is a MultiPage document (i.e. not just a single page).
  • You select that copies be printed "collected" (e.g. pages 1,2,3,..., 1, 2, 3,..., 1, 2, 3,...) rather than "not assembled" (i.e. pages 1,1,1,..., 2, 2, 2,..., 3, 3, 3,...).
  • The driver assumes that the printer can produce multiple copies of a source only copy - this is known as ing MOPY(I think it stands for "copy of the original multiple").
  • But the printer does not function MOPY - usually this is only available if the printer has a hard drive or a large RAM disk - I do not think that the LJ1320 supports one of these.

  You can confirm that the foregoing occurs by:

  • "Capture" a print job to a file (using the option "print to a file" in the print Word dialogue or sample driver
  • Then examing initially file resulting .prn (you should be able to open it in Notepad).
  • Most of the file can be unintelligible, but initially will look like:

  

  If the command SET QTY is there, this confirms that the driver think the printer will make copies.

  If so, check the settings of the device to the printer:

  

  to check whether or not the system thinks that a hard disk is installed on the printer, and Mopier mode is enabled or not.

  If the disk hard printer is set to installed, change to not installed.

  If the Mopier Mode is set to Enabled, change it to disabled.

  Then repeat the tests to see if it makes a difference.

  He should do it, although the print jobs sent to the printer will be larger (they will contain several copies).

• HP LaserJet 1320 Print blank Page extra

  LaserJet 1320 shoot two sheets of paper when printing a single page. It does when you print a test page.

  Its also happens when I do the desktop remotely.

  Depending on the configuration page, the total number of pages does not include blank pages that follow each of the printed pages.

  Is there a hardware problem or configuration of printer?

  If it was the model that was network when you printed the configuration page that you would also get a Network Setup page.

  You must be connected to a network via an Ethernet cable to see the integrated Web server, if it is a model that supported it.

• Only a network printer LaserJet 1320 prints

  Hello

  I have a shop.  In my office, I have a HP Laserjet 1320 PCL printer attached to my new computer running Windows 7. On my network, I also have a computer in the store that is running on Windows XP. After sorted desktop drivers to make the printer work with PCL 6 (it printed only a copy when the value of PCL5), I cannot now make the computer store impression. Is it important that computers are running a different version of Windows and the computer of the shop would have the Windows 7 driver for the printer as well as the XP driver or just one of them and if so the one who! This file the printer disk/s should be in?

  If the printer on the desktop computer port is LPT 1, should the store by using the same or does \\oshop?
  Any advice would be much appreciated!
  Thank you

  your best solution is directly connect to a computer and then share the printer from the pc

  LeftnWrite wrote:

  Hello

  I have a shop.  In my office, I have a HP Laserjet 1320 PCL printer attached to my new computer running Windows 7. On my network, I also have a computer in the store that is running on Windows XP. After sorted desktop drivers to make the printer work with PCL 6 (it printed only a copy when the value of PCL5), I cannot now make the computer store impression. Is it important that computers are running a different version of Windows and the computer of the shop would have the Windows 7 driver for the printer as well as the XP driver or just one of them and if so the one who! This file the printer disk/s should be in?

  If the printer on the desktop computer port is LPT 1, should the store by using the same or does \\oshop?
  Any advice would be much appreciated!
  Thank you

• Pavilion a1400n: Windows XP driver for a LaserJet 1200 printer attached to a Windows 7 computer

  Where can I find the driver Windows XP on a 32-bit PC wants to be able to add a printer connected to a PC running Windows 7 64 bit which are on my home network?

  I worked through the process of adding a printer to my Windows XP machine that I can get to the point in the Add Printer Wizard after the navigation of the printer and choose what I click Next and the response that I actually want add the printer that is on the Windows 7 PC. I am then presented with a dialog box indicating that the INF file is necessary. I downloaded the drivers that are on http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=58928 & swLangOid = 8 & swEnvOid = 4063 and tried each of them pointing to the directory where they are each. When I do that I said that "Windows cannot locate a suitable driver. Contact your administrator for help to locate and install a correct driver.

  Where can I find the suitable driver for PC Windows XP print to a printer connected to a Windows 7 PC on my network?

  I found a solution to this problem, but this isn't the ability to print a document from my XP computer to a shared printer connected to my Windows 7 computer. The solution I implemented was to connect my XP computer to the printer via a parallel cable. I went with this approach for two reasons.

  First of all, I realized that none of the drivers for this printer are available for Windows 7 64-bit allow me to print a document double sided or in a brochure (print booklet of course depends on the ability to print double-sided) from my Windows 7 computer. The dirver for this printer on my XP (32 bit) provides these capabilities. The 64-bit Windows 7 driver that Microsoft provides through Windows Update appears to support these capabilities, but when these options are selected, that the document prints single sided. Windows 7 64-bit universal printer driver for this printer that is available on the HP site is not yet expected to provide these features. It's as if HP abandoned for most of this printer. I understand that this is an old printer, but what I find amazing, it is that he was not so old a printer when Windows 7 64-bit was new, so why can't HP provide the latest version of the driver that could perform these functions? (Of course I can just be assuming that at some point it might). Surely it cannot take up that much space on their server. The other question is why the universal printer driver for Windows 7 64 bit cannot provide these capabilities? XP driver 32 bit I have, which is also a universal printer driver that I downloaded several years ago on the HP site, provides the capability. I have tried downloading a version of XP 32 - most recent bit of the driver to see if it was stripped of these capabilities.

  Second, I chose to use the parallel connection because my XP computer has a parallel port, I already had a parallel cable which was not used, and doing so allows me to have the printer connected permanently on both computers. Tempting to connect two computers using a cable USB would require to manually switch the USB of a computer connection to the other whenever I tried to print from the computer that was not connected.

• HP Laserjet 1320: Printer hard drives

  Is about to recycle both HP printers for new ones.

  These printers have HP hard drives:

  HP Laserjet 1320

  HP Photosmart8250

  Thank you.

  The Photosmart 8250 and Laserjet 1320 contain not all hard disks.  Make sure that no media cards are left in the Photosmart 8250, these could contain images that you want to keep.

• HP driver unavailable site - for windows 8.1 HP Laserjet 1320 printer

  
  

  Hi Maxim

  Windows HP PCL5 universal printer driver

  8.1 for Windows (32 bit)

  FTP://ftp.HP.com/pub/softlib/UPD/HP-UPD-5.9.0.18326/UPD-PCL5-x32-5.9.0.18326.exe

  Windows 8.1 (64-bit)

  FTP://ftp.HP.com/pub/softlib/UPD/HP-UPD-5.9.0.18326/UPD-PCL5-x64-5.9.0.18326.exe

• HP LaserJet 1320 printer driver

  Can I use a HP 1320 LaserJer printer on a Dell with Windows 7 laptop? It seems that I could download the software, but the cord I have does not work with the laptop.

  J.-x., welcome to the forum.

  We have a problem dealing with other brands of laptops.  We have the features for them.  You will need to determine what type of connectors for your laptop is available and buy a cable that is compatible with the printer and the laptop.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP laserjet 1320 connected to windows 7 but cannot print on a windows xp computer

  We have 4 computers connected to a printer.  2 computers windows 7 and the other 2 are windows xp.  When I try to find the printer and connect to it it is an error code that is displayed saying "the server for the ' pcl 5' hp laserjet 1320 printer does not have the printer driver installed.".  If you want to find the right driver, click ok.  otherwise, click Cancel and contact your network administrator or the OEM for the printer driver correct"I don't know where to even try to find the right driver.  I tried uninstaling and reinstaling the drive of the printer and it still does not work.

  all I ended up doing was to move the printer to the computer xp and related windows computers seven until the printer this way, everything works and there is no need to download all the drivers.  I tried to download everything as you said, but I more was skip a step or put in the wrong place.  Thanks anyway for your help

  Zack

• HP LaserJet 1020 printer: Download the drivers for the HP LaserJet 1020 printer

  I would use my HP LaserJet printer, who worked previously with Windows 98SE with my HP/Compaq laptop which runs on Windows 8.1 (x 64). My HP/Compaq laptop is not connected to the Internet. However, my laptop HP with Windows 7 (x 64) is connected to the Internet. Is it possible for me to download the drivers for Windows 8.1 desktop my HP laptop and move the pilots in a DVD which I can install them in the HP/Compaq? This procedure is possible or if it is not recommended. Thank you very much for your suggestions. Robert

  Hey @Robert61,

  Welcome to the Forums of HP Support!

  I understand you are trying to download the drivers for your Laserjet 1020 printer on a single computer, burn the drivers to a DVD player and install it on another computer. It should work without any problems.

  Please let me know if it solves your problem. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP laserjet 1320: PRNTER IS NOT PRINTED AND ITS CRIMINAL IS OFF

  Hello

  I have HP laserJet 1320 printer, before its usb connector seems to be mulfunction, I replced the trainer, he began working again, but after a few days failed to print and its criminal turned off, put except when I turn on does not start immediately, will start after the switch several times.

  Any help is highly appreciated. Thank you

  No idea what you mean by criminal is off. If you have replaced the trainer, remove side trim and with the power off, reinstall all connections to the new trainer and see if it boots. If still an issue I think that the new trainer has a problem. There is an engine test button below the trainer that you can press to see if it prints a page with lines. If it is then that confirms that the trainer has a problem.

• Windows 8 driver for LaserJet P1005 printer?

  Does anyone know when driver Windows 8 will be available for the LaserJet P1005 printer?  Says support page 'end 2012' - but here we are in 2013 and no driver.  Hoping that HP Experts may provide information, or a temporary workaround.

  Try to remove the software from your computer by following this video-

  http://youtu.be/-M0GVVcwT-o

  A time out, try to reinstall the software and try to print again.

• LaserJet 1320: Hp printer does not not on Windows 10

  I just recently upgraded to Windows 10 and the HP LaserJet 1320 printer does not work. I went to the site and downloaded the correct driver (64-bit). The printer appears in the printer list when I go to devices and printers, but can not choose the printer when I go to print something. If I go into settings > devices in Windows, I'll see the printer listed, but I can not set the default printer, and it says "Driver is unavailable."

  Is there a better driver, or a way to fix this?

  Thank you.

  It is connected through the USB port, and of course, I tried connecting directly first, who did install a driver, but he had the same result as the download of the driver separately. I was finally able to make it work by installing a different driver, which I don't remember, but this has been resolved weeks ago.

• LaserJet P1102w: Printer 'offline' since the upgrade to El Capitan on MacBook Air - using the USB cable connection to print

  Updated the MACBook Air to OS X 10.11.4 El Capitan.  In this process, my printer disappeared.  Apple support had to intervene to get the printer view and print - that was yesterday & took 1.5 hrs.  Today, I tried printing and get the error "offline."  I went through the steps of unplugging the printer and Router 2 x, but always 'offline' message.  Help please!

  Hey @mel1121,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your Mac OSX 10.11 for the Laserjet P1102w printer machine printing. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  2. Hold down the CTRL key and click the icon of your printer on the left.
  3. Click on reset printing system.
  4. Click on the button "+" in the lower left corner of the screen.
  5. Select your printer from the list.
  6. Click in the box next to and select your printer from the list.
  7. Click on Add.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.