for loop in while loop

To all,

I have a question, I have a loop within a while loop. The loop runs and displays the log data. It seems that, until I have stop the while loop that log data display. It almost seems that the for loop runs until the while loop is stop.

The following accessory is an example of what I have in my code. But the because the loop runs in this example. My code is the same idea, but the loop seems to run when I start my program with execution of climax. Otherwise, it runs once I left the while loop.

All entries?

Thank you

Cosmica

I tried your VI and there is nothing wrong the way in which it executes. Nothing happens until the second tab is selected and you press the 'off' button, date on which the loop FOR runs until the indicator shows a "9". In subsequent runs, again, it count up to nine, but it is so fast that you never see. For the observer, the indicator remains at nine.

Of course you would see things a little bit better if you place the small waiting inside various parts of loops. At present, the VI consumes all CPU do nothing but turn empty loops for always while spending from time to time some nanosecods to iterate through the loop FOR. You also destroy your resource VISA with tunnels of default output, so the fence at the end probably will fail. Overall, the code seems too complicated for what you want to do. Do you really need to link a case control tab structure? Seems unnecessary. The for loop should run when the button is pressed, since this implies automatically that Your ' e on the second tab, you don't need to read the tab control. It's redundant!

Tags: NI Software

Similar Questions

  • For loop within a while loop

    I have for loop within a while loop... admission to the for loop N comes from the VI selection... the while loop I a condition essentially statement it stops just after to finish all the iteration in loop...

    Entrance to the N loop is bascially driven by a local variable... that's the problem Iam having:

    When I press the Start button to run the program... regardless of the output of the select VI is gives the N of the for loop, then the loop starts and then ends in place... and when the output of the select statement takes a different value (the N of the loop for) loop not work until I restart the program again... What can I do so that the for loop runs again for another value of N, the RUN program button is enabled.

    1. clean your diagram.  Style guides suggest keep the pattern of a single screen.  With a little effort, I was able to get your DB less than 1600 x 1000 pixels.

    2 then I can see (some) it happens all at once. This thing does nothing?

    3. local variables can lead to race conditions.  Output in Angle position may be a race condition, although is probably not what you wanted to do.  What does the wired local time at the moment present terminal meter? (Ooops! Two controls with the same name - which can be quite confusing as well!)  If you need or want two components of façade having the same text, use the legends.  Make the labels is different so the comic is more readable.

    4. having more than one Dequeue function on the same queue will lead to unpredictable results.  When an item is removed, it is removed from the queue and is not accessible to any other Dequeue function.  In parallel loops, you have no way of guessing which Dequeue will seize any particular element.

    5 use Boolean reverse instead of Select with wired False to true and true cable at the entrance to false entry. Better, just make the case of forgery in the structure of the case within the for loop the real deal. No required reversal.

    6. I was not looking for to determine the logic of the code within the structure of this case. It seems I could have posted a much simpler way to do this several weeks ago.

    7. use multiply from the Digital Palette rather than a node form multiply by 4 or 1.8. Uses less space BD and is much easier to read.

    8. as has been suggested, learn how to work the machine architecture and the State of producer/consumer.  They can make your life much easier.  Do not try to convert immediately to these models.   It's too much bite to at some point.  Learn how they work first.  Make a few simple examples.  Then rewrite this program in this format.  Probably faster than fixing what you have now.

    Lynn

  • FOR loop does not update the local Variable

    I am newer to labview, and I can't wrap the head around why not a habit of local variable to update in the code if it updates on the dashboard. Anything im missing?

    Assume that you are talking about the local variable of the 'State of the cell. The terminal updates every 500ms in the small top loop, the local variable indicates simply that the indicator and thus updates also.

    The problem is "dataflow" and you need to familiarize yourself with the concept!

    Once the while loop starts, the local variable is reading and inside the loop begins. Most likely, the local variable is read before it is updated in the small loop, so most likely returns the value of a fade on the first iteration of the while loop. Now the small loop continues to go twice per second for about five seconds. Only after the loop FOR (and everything else inside the while loop) completed, the while loop will go to the next iteration, date on which the local variable is read once more, this time with the last value of the last for loop iteration of the previous iteration of the while loop.

    In summary, the local variable updates very well, it's just that the code does not read the new value around most of the time.

    Your VI is full also potential competition conditions caused by the over-use of the local variable. You need to respect the proper execution order by eliminating local variables.

    So what is the solution? Hard to say without knowing what the VI is supposed to do. Most likely, you will need to remove the inside OF the loop and use it outside while loop for everything.

  • How to end Vi in a For loop

    Hello. I enclose my Vi. I have a question about stopping a loop For I have 2 loops for the case "Test underway". I have a termial conditional that will stop my Vi but only after you have completed all the iterations of the loop For I have need of this Vi to stop immediately, when you press the stop button. I realize that it will take probably still finish an iteration, however, at the present time it waits until all iterations are performed, before coming to rest. I'm doing it with the same front button that stops the while loop. I tried a local variable, but to change a mechanical action and I prefer not to do, if this is possible. There was a lot of posts related to this topic here on the forum but I couldn't find the one suited to my needs. Thank you for your time.

    Your While loop waiting loops to stop, so you can use local variables of your stop button to stop the for loops right now.

    See you soon,.

    Jimmy

  • Creating tables in a nested for loop

    Hi all.

    I was stuck in this problem for quite a while now and I still don't know how to continue. Some outside the entrance would be greatly appreciated!

    I'm doing the following:

    -Take an array of numbers, to check if they are within a certain range (e.g. between 2 and 4)

    -Build two new arrays: one with all the numbers that are inside the beach and the other with the rest.

    An additional condition is that the amount and value of the range conditions will change (for example, it could be between 2 and 4 only / 2, 4 AND 6 and 7 according to the entry)

    To treat this, I created two nested for loops - one that goes on a table that contains conditions of the beach and inside that actually go and check if the values are in the range. I think I did that part successfully, but the next part is confusing to me - how to actually create the tables separated within two loops for?

    My apologies if I did not explain it well. Another method to support this problem is I want to translate following LabVIEW:

    Ranges of table / / [1 5 7 10] exodus-> This means we want to divide numbers based on those who are in (1,2) and (4.5) against those who are not

    Table of values / / [2 3 6 11 3]

    EndOperationDelegate table / / array of values within the range
    Table outValues / / Array of values out of range

    for m = 1:size (ranges)

    for n = 1:size (values)
    If (THE NUMBER IS on the INSIDE of EACH RANGE)
    EndOperationDelegate = [EndOperationDelegate NEWNUMBER]
    on the other
    outValues = [outValues NEWNUMBER]
    end

    end
    end

    Sounds easy enough, but it gets so chaotic with Labview that I don't know what to do. I have attached a reference image - insertion in the array function is not in fact add to the table, it creates a new table. How can I save that for when the nested for the ends of the loop?

    I have seen a few examples with shift registers which lie in a loop and I couldn't successfully that transfers in my block diagram.

    Any help/direction would be greatly appreciated.

    Hello!

    See the following example to understand how you can create a table in the loop For

    In your case, you also can uce conditional terminal to create a table only when then located nearby. It makes the code much cleaner that the structures of the case

    Hope this helps, if not, let me know if I can help you!

    Marcin

  • Have different conditions for loop start and stop

    I do a VI when a circle is moving on an image control and its movement is decided by programming, but also by the user. I have programmed the speed of the circle as a vector which turns (using a rotation matrix) when a certain condition is met. This condition is dependent on the position of the circle and direction as well as other entries. The tricky thing is I want to that when the rotation condition is met (true), the rotation continues until the angle of the vector is equal to the original angle (when the condition became real) + / variable x.

    So my question is how do I program a piece of code that once activated, will run until a stop (depending on the State of vector early in the race) condition is reached. As it should be when the VI is on, I can not put a while loop inside an another while loop. Online help mentions also conditional for loops, but it isn't available in my version of LV (8.2)

    The correct solution is a state machine with a case inside a single while loop structure. Based on the need to use one of the several cases and move on to another matter as necessary using a state variable (for example, an enum) in a registry change. One of the cases should be slowed down and not do much except maybe controls survey.

    There are a lot of models.

    Do not hesitate to contact a simplified example of your code and help you.

  • Cursor for loop in PlSql

    while I was studying on cursor for loop I found this statement in the web

    "A cursor FOR loop implicitly declares its index of the loop as the % ROWTYPE record."

    for example an emp table contain more columns empno, ename, sal, hiredate deptno

    and take a cursor for loop until

    for rec in select empno, sal from emp loop

    If the cursor loop for said index of the loop as a % rowtype our cursor statement must include all columns and follow the data type compatabulity.

    Here our cursor statement includes only a few columns, if we use % rowtype to select all columns but here we do not have it.

    Please can someone explain what is happening in the cursor for loop?

    Type % line is not for the table. its for the cursor.

    its almost like cursor % rowtype

    Select ename, sal from emp will be rowtype of ename and sal... not all the columns EMP

  • slider with a for loop

    Hi all

    I have a simple slider in my pl/sql procedure. I use the method for the slider of the loop and retrieve the values below.


    DECLARE

    VAR_A VARCHAR2 (100);

    CURSOR C1 IS
    SELECT DEPT_NAME, DEPT_NO OF THE DEPARTMENT;
    BEGIN

    FOR I IN C1
    LOOP
    VAR_A: = I.DEPT_NAME;
    END LOOP;

    -etc etc.
    -etc etc.

    EXCEPTION
    WHILE OTHERS THEN
    DBMS_OUTPUT. Put_line ('hello');

    END

    This workfine but if the DEPT table does not all records in it, it goes directly to the management of exceptions, and if there are all the other instructions after the FOR LOOP, they will not be executed. I know there is a method to use the cursor (instruction FETCH) more, but I want to know what is wrong by using the FOR LOOP.

    The strange thing about this example is, even if I catch the exception, the program stops and if the DEPT table has no recording errors.

    Any suggestions or tips are greatly appreciated.

    the program stops and if the DEPT table has no recording errors.

    This seems a little suspicious. Probably another error product which is now hidden simply because of your manager WHEN of OTHER of exceptions, that didn't come out the real error message.

    I recommend getting rid of the exception handler together and after the release of the thrown exception.

  • parallel processing: for loop taking place

    Hallo,

    I have a loop 'for' runnin on this system: LabVIEW2009, windows7, intel i7.

    I wonder if and how I can tell to LabVIEW that he would be allowed to run different iterations of the loop at the same time (concurrently) on my processor with 8 cores.

    Now, it will execute the next iteration when it ended the previous, even one so is there no dependencies in iterations.

    I want to give a 'ownership' of the loop, which means that it can be "unfolded" for parallel execution.

    Thank you

    Pier

    pop up on for loop and select "configure interation Prallelism."

    Activate it.

    Wire a certain number to the new 'P' of entry to specify how many processors to spread it everywhere.

    Ben

  • for loop in formula node does not

    Hello

    I; m trying to use for loop in the node of the formula, but it is does not work. I want the output (y1) product value in certain range (a and d, and of course one is smaller than d). I ' do not use primitive labview since a and d are keep changing (both are variable). I tried to put "return 0;" after the y1 equation but the error popup.

    The issue of the loop works not because it gives the last value (I average would be ""). It does not begin with an (initial) value.

    Please help me how to solve this problem...

    Pls ignore other variables not used in the equation. Thank you!! A lot

    Your code works.

    But why you use loop?
    You get the last value, so you can get it in a single step with x correct;

    Also why you say that can not use primitives?
    If you use wire instead of terminals or local variable States values constant.

    Y1, y1_2, y1 3 is the same values calculated differently.

  • parallel for loops does not

    Hello.

    I'm learning the multi - thread programming. To start, I use "parallel for loops" and I was surprised that it does not work. One - thread loop work a few times faster (depending on settings) that multi - thread. I don't know why, and it is my request to correct my Vi to work properly.

    Lenovo, G580, Windows 7, 64-bit computer

    Intel Core i7 3632QM
    Ivy Bridge
    Specification Intel (r) Core i7-3632QM CPU @ 2.20 GHz
    Package (platform ID) Socket 988 B rPGA (0x4)
    Number of hearts 4
    Number of threads 8

    LabView 2011.

    Altenbach says:

    Gibbon wrote:

    What was 'strange' behavior?  In "linia dluga" when inside the loop is on '1' of the "spreed up' between one and multi-fil is about 3 times, when I put it in '20' this grow to 6.2. It was strange form me, becourse I expect a similar value.

    A parallel FOR loop has an overhead for parallelization (split the problem, then go back the results, etc.). If the code is very fast, the overhead is proportionally larger. If the Subvi takes a long time to complete, the overhead of parallelization is insignificant. It is often not worthwhile to parallelize the loops with a very simple and fast code.

    Gibbon wrote:

    Altenbach - I have another question if you can help me - how did you "seconds relative high resolution." VI "? -I want to say how did you know that there is this 'vi '. And thanks a lot for your modyfications.

    You can find it in vi.lib\utilities. It is well known.

    Maybe not well known enough!  the 'Hidden gems' package adds to your palattes.  It has also been considered by a nugget of the community

  • For loop runs with the value of N unwired

    In this case will be a loop run connected to the loop N worthless? I have seen a few examples of the loop for run without a certain number of times set to be ran wired or for example a size of table or something like that.

    PauldePaor wrote:

    Here's a program I am and as you can see the image that the program runs without the loop N being wired. The program will run without problem

    As everyone else has said, you don't have to plug something on N.  If you wire up a table for loop for input "auto-index", the loop for will run automatically the smaller table size.

    Perhaps an example will help:

    This makes a loop on my table size (in this case, long of 5 elements).  On the edge of the loop for which resembles [] brackets, indicates that it is auto-indexé.  The loop should go through each item one at a time (1, then 2, then 3, then 4, then 5).

  • Préallouée VI environment in paralleled for loop

    Hello

    I searched a bit and couldn't find that everything about this specific issue.

    If I have a Subvi in a parallelized for loop and the Subvi is set upon reentrant preallouee clone, the Subvi register also several characteristics of memory depending on the number of loop iteration For? My specific application is a Subvi containingvibration Analytisis screw using the previous data in their spread and filters.

    Thank you!


  • For loop creates 1 d data table

    Hello, I am building the circuit below, and I'm running into a lot of problems with the loop, creating a table 1 d of data from certain types of data such as the ERROR OUT and the VISA NAME of RESOURCE. I understand why it does this, but I only need the last value in the table (the value of the last iteration of the loop for). This is true for me for the error, resource name of visa, and I was thinking of using the Boolean value that indicates when the for loop.

    Is there a simple way to extract the last value in the table 1-D so that it is correct to pass along trails, VISA and ERROR type?

    You actually create a block diagram, not a circuit.  A circuit is an electrical system including devices and wires.

    If you right-click on the tunnel and choose disable indexing, then you get the value of the last iteration rather than a 1 d table.

    I recommend you watch the LabVIEW tutorials online
    LabVIEW Introduction course - 3 hours
    LabVIEW Introduction course - 6 hours

  • LabVIEW parallel for loop and OpenMP

    Hello:

    It's just a curious post, I just learned about OpenMP and I found that OpenMP helps you to parallelize loops in c about the same way that you can use the loop For parallel in LabVIEW.

    The loop For Parallel LabVIEW is being implemented under the hood using OpenMP? Or is it just a coincidence?

    No, it is not implemented LabVIEW parallel for loop under the hood using OpenMP. You might be interested to read this article on modern developments in the LabVIEW compiler architecture. Specifically, in this case, it's the DFIR technology discussed here that facilitates parallel for loop transformations.

Maybe you are looking for

  • Satellite L30-113 - pilot iqrl not less or equl

    Hi, I hope someone can help me... I think my laptop is bad. I get the blue screen with the message "driver not less or equal." Now, this laptop is old I don't know, but it is normally a reliable girl and I am a little attached to him. I bought a 2nd

  • Satellite L450 - 18 d - language keyboard problem

    Hello! I have a Toshiba Satellite L450 - 18 d, which was purchased in England in May and then sent to me to Portugal, so I chose Portuguese as default language for my keyboard. However, for the last two weeks, I had this problem: since I installed Mi

  • Pavillion 2288se g6: WiFi problem

    I have a pavillion 2288se g6 that wifi does not work. The F12 key is red instead of white, there is no yellow staff on the pilot. Please, how can I activate wifi?

  • multiple lines of text on a command button

    Is it possible to get multiple lines of text on a command button.  Instead of a large button with the text "start the Test System".  I would like a big button with 3 lines. Beginning Test System

  • _ "Windows Explorer has stopped working" error - HELP Please! __

    I tried pretty much everything I can try in this thread, and nothing seems to work! It is very probably the the most annoying problem that I experienced with windows! I can open all the files and programs it is just that the 'Windows Explorer has sto