For loops with string

Excerpt: Labview Developer Suite Sound and Vibration Option 2009 SP1

I need format some number and strings to insert into a txt file using the loop For. This structure above make the service but an empty space when run the outer loop. I need to remove this empty space, I have tried several ways, but don't get the success.

Turn the arrow on the figure.

'Table in spreadsheet string' function apparently puts it in a pair of 'carriage return, new line' all four lines (a "line" of the original array). I could find any arrangement that prevents him, not know not why it presents itself as a space, but if you put a "find and replace" (from the string function palette) and are looking for a 'return Constant transport' and replace with an "empty string", defining the Optional Boolean value "Replace all?" true it removes.

Tags: NI Software

Similar Questions

For loops with the cursor line and indexing

Hi all

I have a question about the loops with the cursor, line and indexing.

How can I scan via a cursor with an iterator?

I would use an iterator as

Whole LoopIndex;
Whole LoopIndex2;

for LoopIndex at the beginning of the cursor at the end of the cursor
loop
line =: cursor [LoopIndex];
for LoopIndex2 of LoopIndex at the end of the cursor
etc...
end loop;

I need to use an iterator because I need to use a nested for loop.

OR

How can I solve the following problem?

Class name % ofClass average test Score
1 Niobe 7 8 8.4
1 alena 4 7 7.5
1 9 7 8.9 Estia
1 Lilly 10 8 9.8
1 Sandra 6 8 8.3
1 Melanie 8 8 8.1
Nadia 2 8 3 4.4
Sayuki 2 9 8 8.4
Diasy 2 7 8 8.0
Flower 2 7 8 6.5
Diana 2 6 8 7.3
3 Flora 7 8 5.8
Sukiya 3 4 8 8.4
Samantha 3 10 8 7.7
Roxanne 3 7 8 6.9
Eline 3 8 8 7.4

I need to
-By class, I need to recalculate each average people
-By class, I need to calculate the % of class score (sum averages / people in the class)

So it can be done in a nested for loop?
Or do I just step by step?

Well, based on this information it would be something like...

SQL> ed
Wrote file afiedt.buf

  1  with t as (select 1 as Class, 'Niobe' as Nm, 7 as Score, 8 as Tests, 8.4 as Average from dual union all
  2             select 1, 'Alena', 4, 7, 7.5 from dual union all
  3             select 1, 'Estia', 9, 7, 8.9 from dual union all
  4             select 1, 'Lilly', 10, 8, 9.8 from dual union all
  5             select 1, 'Sandra', 6, 8, 8.3 from dual union all
  6             select 1, 'Melanie', 8, 8, 8.1 from dual union all
  7             select 2, 'Nadia', 3, 8, 4.4 from dual union all
  8             select 2, 'Sayuki', 9, 8, 8.4 from dual union all
  9             select 2, 'Diasy', 7, 8, 8.0 from dual union all
 10             select 2, 'Blossom', 7, 8, 6.5 from dual union all
 11             select 2, 'Diana', 6, 8, 7.3 from dual union all
 12             select 3, 'Flora', 7, 8, 5.8 from dual union all
 13             select 3, 'Sukiya', 4, 8, 8.4 from dual union all
 14             select 3, 'Samantha', 10, 8, 7.7 from dual union all
 15             select 3, 'Roxanne', 7, 8, 6.9 from dual union all
 16             select 3, 'Eline', 8, 8, 7.4 from dual)
 17  --
 18  -- END OF TEST DATA
 19  --
 20  select class, nm as "NAME", score, tests, average
 21        ,round(((average*tests)+score)/(tests+1),1) as avg_person
 22        ,round((average / sum(average) over (partition by class))*100,1) as class_average
 23  from t
 24* order by class, nm
SQL> /

     CLASS NAME          SCORE      TESTS    AVERAGE AVG_PERSON CLASS_AVERAGE
---------- -------- ---------- ---------- ---------- ---------- -------------
         1 Alena             4          7        7.5        7.1          14.7
         1 Estia             9          7        8.9        8.9          17.5
         1 Lilly            10          8        9.8        9.8          19.2
         1 Melanie           8          8        8.1        8.1          15.9
         1 Niobe             7          8        8.4        8.2          16.5
         1 Sandra            6          8        8.3          8          16.3
         2 Blossom           7          8        6.5        6.6          18.8
         2 Diana             6          8        7.3        7.2          21.1
         2 Diasy             7          8          8        7.9          23.1
         2 Nadia             3          8        4.4        4.2          12.7
         2 Sayuki            9          8        8.4        8.5          24.3
         3 Eline             8          8        7.4        7.5          20.4
         3 Flora             7          8        5.8        5.9            16
         3 Roxanne           7          8        6.9        6.9          19.1
         3 Samantha         10          8        7.7          8          21.3
         3 Sukiya            4          8        8.4        7.9          23.2

16 rows selected.

For loops with the array variable
I am using a loop for example with the name of the table in the select variable, but get a compilation error

for current_aud_row in (select * from ' | table_name |' where...)

table_name contains the name of the actual table

I do that I get the name of the table as a parameter.
Help, please!
Excellent. Oracle APEX (Application Express) is a web IDE and RTS - it makes heavy use of DBMS_SQL to execute SQLs and restore these dynamically in the form of Web-based reports, or turn it into XML for graphical rendering using Flash software.

DBMS_SQL is perhaps more complex (and only really necessary when it comes true dynamic SQL at all stages - including the result of SQL), but we must know how to use and apply. It is a valuable tool at times.

Bug in the conditional for loop with an array empty

There seems to be a bug in the loop with a conditional terminal.

If an empty array is connected to an indexed table auto entry tunnel, a tunnel of output array has an element instead of zero.

The constant matrix is left empty.

High loop without the conditional Terminal produces an empty array.

Conditional down with a terminal loop never true generates an array containing a single element

Thanks to LabVIEW version 8.5

'For' loop with a different number of iterations. Second, the auto-indexation of the tables with different sizes is done. It can affect the performance of the Vi?

Hello

I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.

Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).

My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...

Thank you very much.

My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used. Once you son upward, LabVIEW must then call Matlab and wait for it to run. I know from experience, the call of Matlab to run the script is SLOW. I also recommend to do the math in native LabVIEW.

for loops with stdout all iterations

Hello

I have a loop that calls an external script. The external script something writes to stdout. I would like to see the stdout. I tried to connect a string to standard output, using a tunnel of concatenation. But it always shows only one line to stdout, not all of the output of the iterations. How can I achieve that?

iviewlab wrote:

Thanks for your help.

I want to see stdout running. So I use a shift register for now. But I still don't understand how to get all the exit seeing a single string. I tried to use the building, but it doesn't seem to work?

How about using concatenate the String?

cursor for loops with exception handling

Hi all
I use oracle11g I need to write a stored procedure to about 10 select statements with the managements of exceptions for each select statement. I am unable to handle the exception handling.please guys help
Here is the code sample I wrote
CREATE OR REPLACE PROCEDURE TEST_PROC
(P_ID IN VARCHAR2,
P_MOB IN VARCHAR2,
P_OUT_MSG OUT VARCHAR2)
AS
CURSOR CUR_RES AS SELECT NAME, INFO, VER_DETAILS FROM TABLE_NAME WHERE ID = P_ID AND MOBILE_NO IS P_MOB;.
BEGIN
FOR REC IN CUR_RES LOOP
P_OUT_MSG: = 'BKY000. '
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN
P_OUT_MSG: = 'BKY001. '
END;
OUTPUT DESIREE WHILE RUNNING IN A JAVA APPLICATION IS REQUIRED
IF THE DATA FOUND BKY000 | RESULT OF THE SELECT STATEMENT
IF DATA NOT FOUND BKY001
PLEASE HELP WITH SAMPLE... PLEASE FRIENDS

It's more clear now

create or replace procedure test_proc (p_id in varchar2, )

p_mob in varchar2,

p_out_msg out varchar2,.

p_result on sys_refcursor

) as

v_err_msg varchar2 (300);

row_count number;

no_data_returned exception;

nonunique_column exception;

Start

Open Select p_result *.

WCP

where deptno = to_number (p_id)

and job = p_mob;

Select count (*)

in row_count

WCP

where deptno = to_number (p_id)

and job = p_mob;

If row_count = 0 then

raise no_data_returned;

end if;

Select keep max (count (*)) (dense_rank first order by Count)

in row_count

from (select *)

WCP

Union all - simulating a duplicate line

Select 7839, "ETBIN', 'PRESIDENT', null, trunc (sysdate), 3000, null, 10

of the double

)

where deptno = to_number (p_id)

and job = p_mob

Group by empno

view count (*) > 1;

If row_count > 1 then

raise nonunique_column;

end if;

p_out_msg: = 'BYK0000 ';

exception

When no_data_returned

then p_out_msg: = "BYK001";

When nonunique_column

then p_out_msg: = "BYK002";

while others

then v_err_msg: = ' procedure TEST_PROC: error: ' | SQLCODE. ': ' || substr (SQLERRM, 1, 200);

raise_application_error(-20000,v_err_msg);

end;

declare

R_C sys_refcursor;

E_r emp % rowtype;

E_m VARCHAR2 (255);

DEPTNO number: = 10;

VARCHAR2 (30) employment: = "PRESIDENT";

Start

dbms_output.put_line (' input parameters: deptno = ' | to_char (deptno) |) '; job = ' | Job);

test_proc (to_char (DEPTNO), Job, E_m, R_C);

dbms_output.put_line (' result: ' | e_m);

If e_m = "BYK0000" then

loop

extract r_c in e_r;

When the exit r_c % notfound;

dbms_output.put_line (to_char (E_r.empno) |' |) '|| RPAD(E_r.Ename,10) |' | '|| RPAD(E_r.job,10) |' | '|| TO_CHAR (E_r.SAL, 'fm99990'));

end loop;

end if;

exception

While other then dbms_output.put_line ('exception: ' | sqlcode |) ': ' || substr (SQLERRM, 1, 200));

end;

input parameters: deptno = 10; job = PRESIDENT

result: BYK002

Statement processed.

Concerning

Etbin

for loops with the name of the layer.

I developed a script that checks if the layer color-101 exists in an open document.
If the layer color-101 exists executes the block of code on layer color-101.
If the layer color-101 are not running action Add layer color-101.
Back at the beginning of the loop to check again
I do it with a loop for and if statement.
1. Why does the loop not stop when the loop count variable corresponds to the layer color-101 name variable?
2. how the loop can return to the beginning to check again the presence of color-101 layer?

Variable decalre
app.activeDocument = docRef;
var theLayer = "color-101;
loop through the layers
for (var i = 0; i < docRef.layers.length; i ++) {}
the layer name corresponds to the loop variable
If (docRef.layers [i] .name == theLayer) {}
Execute the block of code for layer color-101
Alert ("Layer" + theLayer + "exist.");
}
}
layer color-101 was not found, enforcement action Add layer color-101
Alert ('The' + theLayer + "' there is no layer: Run Add layer color-101 action. '");
back at the beginning of the loop and check again

Your loop does not actually stop to find the right layer. He is content to display the alert popup window, then continues. Also the 'not found' - part will still raise. And the comparison must be 100% equal without difference case or spaces or 'copy 12' - suffixes.

Try something like

Declaring variables

app.activeDocument = docRef;

var layer_found = false;

loop through the layers

for (var i = 0; i)< docref.layers.length;="">

var layer = docRef.layers [i]

If (Layer.Name.toLowerCase (). IndexOf("case-101") > = 0) {}

Alert ("found layer:" + layer.name);

layer_found = true

do what needs

}

}

If (! layer_found) {}

Alert ("Layer not found!");

do what needs

}

Simple for loops with the table?

Just a quick question! I've been watching this for 2 hours and I searched everywhere, but always without success.
I have a simple table containing elements. When the user edits the page, I want that these elements in the array to become visible.
```
var outfit:Array = ["Doll.Drawers.Shirt1", "Doll.Drawers.Pants1", "Doll.Drawers.Jacket1"];

function f_item_show(event:MouseEvent):void
          {
                    for(var i:int = 0; i < outfit.length; i++)
                    { 
                              trace(outfit[i]);
                              this[outfit[i]].visible = true;  // THIS IS THE ISSUE //
  
                    }
          }
```
The elements in the array are strings of the instance names, so I just need each string to be converted to an object and part .visible each element set to true.
I know my loop works properly, because the trace reads accurately each instance name in the list. I thought that this part [] would solve my problem, but it's not... I get this error message:
```
TypeError: Error #1010: A term is undefined and has no properties.
          at PokeDress_fla::MainTimeline/f_item_show()
```
I know it's one line of code, because it works perfectly when I delete. All my instance names are correctly labeled and added, because they are used many times in the code without flaw.
What I am doing wrong?

To use the stand of notation, each medium can only represent a single object, so you would need three media since there are three objects in your channel... which means you would need three tables.

If they appeal to target something inside the Doll.Drawers object, then you could simply store the shirts and pants and whatnot in the table as strings and use...

Doll.Drawers [outfit [i]] .visible = true;

What you should try instead is to store the actual paths to objects rather than representations of string of them, as in...

var outfit:Array = [Doll.Drawers.Shirt1, Doll.Drawers.Pants1, etc...

Then you should be able to use...

costume [i] .visible = true;

for loops with movieclips

Hello:
I have twenty movieclips on stage with these names:
G1
G2
G3
G4
....
How to make invisible with a loop for, as
for (i = 1; i < 20; i ++)
{
g + i.Visible = false;
}
What does not work.
Can you help me, please?

for (var i: int = 1; i< 20;="">

{

This ['g' + i] .visible = false;

}

How to: display a message while for loops, with no required user input

Hi everyone, I'm relatively new to LabView, using 8.5.

I want to display a message all in one for the loop runs, requiring no user input to delete the dialog box (that is to say, the box disappears after the end of the loop For).

Any ideas?

Thank you

Darren

for loops with cursor
Hello Experts,

I'm a beginner in PLSQL. I use the oracle 11g on windows machine 7.

I wrote a simple code that gives me an output.

DECLARE
v_dealer_name southern_orders.dealer_name%type;
v_total_order southern_orders.total_order%type;
cursor southern_cursor IS
SELECT distinct (dealer_name), sum (total_order) OF THE group southern_orders by dealer_name;
BEGIN
OPEN southern_cursor.
IF this is is southern_cursor % ISOPEN THEN OPEN southern_cursor;
END IF;
BECAUSE me in 1... LOOP 38
EXTRACT the southern_cursor in v_dealer_name v_total_order;
EXIT WHEN southern_cursor % NOTFOUND or southern_cursor % ROWCOUNT > 37.
dbms_output.put_line (' the dealer is: ' | v_dealer_name |) "and their order is:' | '. v_total_order);
END loop;
close southern_cursor;
end;

the result is:

the dealer is: has and their order is: 1000
the dealer is: B and the order is: 2000
the dealer is: c and the order is: 3000

In the code above, I calculated the total number of lines, and then wrote the code. Instead, I would use the sql loop to the code.your above help is appreciated.
```
DECLARE
    v_dealer_name southern_orders.dealer_name%type;
    v_total_order southern_orders.total_order%type;
    cursor southern_cursor
      IS
        SELECT  dealer_name,
                sum(total_order) total_order
          FROM  southern_orders
          group by dealer_name;
BEGIN
    FOR v_rec in southern_cursor LOOP
      dbms_output.put_line('the dealer is : ' || v_rec.dealer_name || ' and their order is :' || v_rectotal_order);
    END loop;
end;
/
```
SY.

How to move the Cursor parameter for loop with the type of table?
Hi friends,
I wonder how to pass a parameter into the second loop in the code example below. Please see the "BOLD" statements and to answer my questions.
Thank you very much. Here's the code.

declare
l_bom_header_tbl BOM_BO_PUB. BOM_HEADER_TBL_TYPE; -TABLE TYPE
V_bom_header_tbl Bom_Bo_Pub.Bom_Head_Rec_Type: = Bom_Bo_Pub.G_MISS_BOM_HEADER_REC; -Record type
v_bom_components_tbl Bom_Bo_Pub.Bom_Comps_Tbl_Type: = Bom_Bo_Pub.G_MISS_BOM_COMPONENT_TBL; - nested table type
c: number = 0;
k: = 1 number;
Start
BOMPXINQ. () Export_BOM
P_org_hierarchy_name = > l_org_hierarchy_name,
P_assembly_item_name = > l_assembly_item_name,
P_organization_code = > l_organization_code,
P_alternate_bm_designator = > '1Test. "
P_Costs = > l_costs,
P_Cost_type_id = > l_cost_type_id,
X_bom_header_tbl = > l_bom_header_tbl,
X_bom_revisions_tbl = > l_bom_revisions_tbl,
X_bom_components_tbl = > l_bom_components_tbl,
X_bom_ref_designators_tbl = > l_bom_ref_designators_tbl,
X_bom_sub_components_tbl = > l_bom_sub_components_tbl,
X_bom_comp_ops_tbl = > l_bom_comp_ops_tbl,
X_Err_Msg = > l_Err_Msg,
X_Error_Code = > l_Error_Code);
If l_Error_Code = 0 then

because me in 1... l_bom_header_tbl. COUNTING LOOP
V_bom_header_tbl.organization_code: = "DSC";

Can assign us a table type of guy like below the registration statement?
V_bom_header_tbl.assembly_item_name: is l_bom_header_tbl (i) .assembly_item_name;.

k: = 1;

I want to pass the l_bom_header_tbl (i) .assembly_item_name parameter in the declaration below: How do I do this?
for j from 1... l_bom_components_tbl. COUNTING LOOP

Can assign us a table type of type array as below the statement?
v_bom_components_tbl (k). Assembly_Item_name: is l_bom_header_tbl (i) .assembly_item_name;.
k: = k + 1;
end LOOP;
end loop;
end;

Published by: ILovePlSql on March 22, 2010 07:51

Published by: ILovePlSql on March 22, 2010 08:16
ILovePlSql wrote:
V_bom_header_tbl emp % rowtype;

If v_bom_header_tbl has just two fields as ename, sal then also the assignment of type table, record type work or if the record type and the array type have the same structure?

Yes:
```
SQL> declare
  2      type Bom_Head_Rec_Type is record(ename emp.ename%type,sal emp.sal%type);
  3      type BOM_HEADER_TBL_TYPE is table of Bom_Head_Rec_Type index by binary_integer;
  4      l_bom_header_tbl BOM_HEADER_TBL_TYPE;
  5      V_bom_header_tbl emp%rowtype;
  6  begin
  7      select ename,sal bulk collect into l_bom_header_tbl from emp;
  8      for i in 1 .. l_bom_header_tbl.count loop
  9        V_bom_header_tbl.ename := l_bom_header_tbl(i).ename;
 10        V_bom_header_tbl.sal := l_bom_header_tbl(i).sal;
 11      end loop;
 12  end;
 13  /

PL/SQL procedure successfully completed.

SQL>  
```
SY.

Very odd behavior of 'for' loop with configurable class
Who can explain to me two compile errors in this fragment?
-----
public class JavaBug
{
Public static interface bugs < TBug extends JavaBug >
{
Iterable < TBug > getTBugs();
Iterable < JavaBug > getBugs();
}

public static why (Bugs bugs) Sub
{
for (bug JavaBug: bugs.getTBugs ())
{

}

for (bug JavaBug: bugs.getBugs ())
{

}
}
}

-----

Sorry if an example like that was allredy displayed, just give me a link in this case.

Published by: 816877 November 30, 2010 07:00
If* 1.4 compatibility is your goal. First, you mentioned here. If this isn't a goal, it's the worst answer because you transfer all the insecurity of the run-time type.

Variable inside 'for' loop with parentheses

Hi all
Coud someone tell me how Im going to put the I variable within the [[]] because I can't get it to work
for (var i: Number = 0; i < product; i ++) {}
_root.menu ["Product" + i] ._x += (product[[[+i]]]x-_root.menu.product["product"+i]._x)/speed;
}
Thank you!

use:

var tl:MovieClip =;

for (var i: Number = 0; i<>
_root.menu ["Product" + i] ._x += (tl ['product' + i + ' x»]-_root.menu.product["product"+i]._x)/speed; "])
}

For loops with string

Similar Questions

Maybe you are looking for