for my HP pavilion's fingerprint sensor only works at the initial log in not any other time

Similar Questions

• HP Pavilion dv6-black screen only works with the external monitor

  I discovered that my screen was not turn on yesterday when I tried to turn on my laptop. Fortunately I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I can not really be restricted to my living room or office to use my laptop.  Y at - it easy fixes to this, or is my only option to take it to someone with experience that replace the monitor for me?

  Hello

  Given the external screen display there are so few opportunities...

  -Sun display-project is a flashlight on the screen and check if you can see the bottom - if background is visible while it is the backlight in the LCD screen that needs to be replaced.

  - Display dark: if it is completely black and nothing is visible when you Flash light on the screen, then it is due to the LCD screen itself might be a broken screen (a cable that connects to the motherboard screen) or could be inverter LCD.

  If the laptop is still under warranty so I recommend you call HP tech support and they will be able to get it fixed for you.

• When you attempt to load an album for listening offline with Apple music sometimes only some of the songs on the album are made available. For example, Weezer White Album. Why?

  When you attempt to load an album for listening offline with Apple music sometimes only some of the songs on the album are made available. For example, Weezer White Album. Why?

  What country do you live? Because I just checked this album and all songs should be available in the Apple music - and thus be downloadable. (I live in the US BTW.)

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• BlackBerry Z10 headphone only works with the left ear

  My headphones (beats studios) only works with the left ear when connected. The helmet has never had a problem on my old iPhone 4 and currently with my rMBP so I know that's not the headphones. Any suggestions?

  There seems to be a problem with the jacket of the head. They are defective for a few pieces and the jacket cannot recognize the HP in the same case, what makes the phone to give no sounds on the notification.

  Try to use different headphones. If the problem persists try replacing the model.

• I bought and downloaded Lightroom 6 Lightroom 5.7 update. When I go to install it says that it cannot install because it only works on 64-bit I did not. Is there a 32-bit version as there was in Lightroom 5

  I bought and downloaded Lightroom 6 Lightroom 5.7 update. When I go to install it says that it cannot install because it only works on 64-bit I did not. Is there a 32-bit version as there was in Lightroom 5

  N ° 6 of Lightroom is 64-bit only.

  Update on the OS support for the next Version of Lightroom

• CSS only works on the page and not in the css doc

  So I have the following code for the shadows: h3.a {text-shadow:-50px 50px white, 1px 1px #00F}.  I put it on my css doc which is connected to my page, but it does not appear.  then I put it in the top of the page, and then it appeared.  Why it only works on the page?

  I just passed something like that for a few hours yesterday and realized that I was not saving the page external .css real after adding new styles.

• LabVIEW 2013 executable only works on the development machine?

  Hi all

  I created an executable to distribute my test software, but it only works on the development computer. With success, I gave my front executables with labview 2012 on the target computers by simply creating the .exe in the project and then Explorer in installing labview nessary drivers and run the engine of time without problems. Now, I created a new test with Labview 2013 program and I can not get my new test .exe application to run on the target computer. Has anyone seen this kind of problem before?  Any help will be appreciated.

  Thank you

  
  

• I paid for a subscription to 299 rubles for 3-4 days. When you try to load the Photoshop license "subscription not found" report

  I paid for a subscription to 299 rubles for 3-4 days. When you try to load the Photoshop license "subscription not found" report

  It is the main cause of the problem, entered URL Adobe with loop back address, thanks to which the activation request is unable to reach the Adobe activation server.

  We need to reset the Hosts file or manually remove entries from the hosts Adobe.

  You can check the link below. :

  https://support.Microsoft.com/en-us/KB/972034

  Let me know, if you need assistance.

• You are looking for an application that would alert me of appointments for my netbook XP Home and is only based on the internal clock.

  Original title:

  Looking for a small footprint application that would alert me of appointments for my netbook XP Home.  Something that depends only on the clock internal.

  Hello
   
  Microsoft XP comes with Outlook Express, which combines the functions of calendar and reminders. You can use this application to program reminders and he uses time as a clock system.
   
  To set a reminder, follow these steps.
   
  a. open Outlook express on your computer of Microsoft XP.
   
  b. Select the day of the month you want a reminder of nec. Once you open the Schedule tab, in the lower left corner, on Microsoft Outlook double click on the date, on which the activity takes place. An event without a title will open. On the screen without title of event, you can choose specific settings you need for the reminder of the event. Can enter the information that the object, location and time of beginning and end of the event.
   
  c. Enter the title and duration of the event. On the event without a title, you can enter the title of the event under the subject field and you can also enter the location of the activities. The subject is what appears on the calendar. You can choose what time the activity starts and ends. To enter a start time and end to clear the all day event option by clicking on it and select the time you want in the fields. The time appears before the subject on the screen of the calendar.
   
  Hope this information is useful.

• Can I use the magnetic charger shows to recharge my iPhone or it only works with the watch?

  I'm looking to see if my Watch magnetic charger will also charge my iPhone. Can someone help me understand this?

  Hello

  Non - magnetic charge cable only works for load your Apple Watch.

• L50-B-1NM satellite - wifi only works near the router

  Hi just bought this laptop for my daughter Toshiba L50-B-1NM 15.6 inches processor Ci3 4 GB 1 TB and wifi only works if he was sitting next to the router.

  It will connect to the internet if the ethernet cable is connected, BUT for wifi, the laptop has been sitting almost touch the router. The rest of the House works well.

  Please could you help me before I take it back to the shop and eventually making a fool of myself.

  I'm really not good with technology so if you do not answer could you explain to me like a baby please ;) lol

  Thank you very much, totally disappointed at the moment because it cost me a lot of money for it :(

  Hi maria,

  I think you should consider a fact: the L50-B-1NM Satellite was equipped with an Intel 802.11ac + card agn combo Wifi/BT.

  802.11 AC is a new WLan standard that isn't taken care of by all old WLan routers.
  But of course, the standard 802.11 A / G or N must be supported by older devices correctly.

  I think first of all you must check if the wireless performance question isn't related to energy saving settings. I guess during wifi problems, the laptop uses battery power
  In this case we would use different power plan settings.

  Please check the settings that are in the advanced within the current energy saving Central WLan power settings.

  Where this doesn t help you solve the problem of WiFi signal weak, you should contact the authorized Toshiba maintainer to check the connection to the WLan antenna.

  It may be possible that the antenna isn't properly connected, which is originally a weak WiFi signal.

  Because the laptop is under warranty, it should be fix toll-free number.

  Greetings

• Is it possible to download only at 03:00 and not at any other time?

  I'm on a satalite connection and need to download updates in the middle of the night. My computer is set to the recommended level (download and install at 03:00), but the computer downloads updates at any time by forcing ISPS to stifle my connection for 24 hours.

  The only way is to change Wu for information only, rises at 03:00 and to download the updates. TaurArian [MVP] 2005-2010 - Update Services

• Webcam HP Pavilion DV6 has stopped working, it worked before, the message says webcam not started.

  The pre installed webcam works perfectly, but somehow, it works now so I;  I have re-insatalled Cyberlink software, but the webcam is not listed in devoce Manager, I get a message saying that the webcam is not started or is not found.  CyberLink Youcam software opens well, but the camera seems not to turn on. Is there a switch for the webcam harware? As there is a work around and turn off the WiFi? Perhaps a system configuration that controls what devices at boot time startup. It's as if the unit is just off, not activated, the close the lens light now, it used to.

  Your help will be very appreciated.  How can I activate my WebCam HP pre-installed?

  TIA

  It comes to my HP Pavilion dv6and the problem of my WebCam suddenly stopping.  I have posted two previous requests for assistance, does NOT see much in the way of answers.

  If I had held my breath waiting for some help or answers to this place - I'd be dead now days.  I tried everything I could think of; reinstalled the software, drivers.  But the error message was always the same saying that "the webcam was NOT turned on."  Back, through some other posts, that I could see that others have also had the same problem and all the guys from HP that mentions his HP job; has said was to reistall the software, or choose the webcam in the CyberLink WebCam software. but this option is still grayed out.

  So I just bit the bullet, because I had to do in the past.  I took off the inside of the plastic frame for the screen at the top and sides.  I had to unscrew two screws at the bottom of the screen frame to the hinges, under self-adhesive pads oval plastic/rubber.  In the Center, you can see the small Assembly of camera and microphone, with white wires, it will.  At that time, I had to put on a second pair of reading glasses, because the parts are so small.  I finally found a tiny multi wired plug-and - taken right of camera lens Center.  I loosened and then pushed with a small bamboo skewer.  When I buttoned up things up; and restarted the CyberLink WebCam driver program came to light on near the lens and the camera showed a live video image which aimed directly at me.  This plastic frame is very fragile and the two small screws will immediately far jump on the floor that you haven't cleaned vacuuming lately.  Has disappeared!

  I must say that I have had absolutely NO help from anyone at HP, I is uncomfortable taking my laptop apart to fix a poorly designed plug/plug obvious for the WebCam.  I like really this computer basically, perfect Beats Audio work for my deafness, I get more and more clear than any other volume laptop that I have tried over the past 20 years.

  I added Ram 16GBs of memory, but I have not noticed that much improvement, maybe when I make more digital video, CAD/CAM and photographics.

  I hope HP can get the image into the connector on the WebCam release and let us know how to fix it with a technology tech or something.  I tried searching and was NOT able to find the answers for my laptop either, I had the chance-out to allow him to run again, I hope you can get yours working again too.

  See you soon,.

  R & R

• Remove the key only to eject the dvd, they will not delete

  I have a Samsung 700 PC series laptop with a Matshita UJ8A7AS drive. I have informed keyboard option, it has Win7 home premium 64 bit.  The DELETE key was 2 options, DELETE the key worked to remove items highlighted or selected. In the text, he would remove characters to the right of the Courvite. By pressing keys Fn and delete entire would eject the disc of the power optical drive slot. NOW it will only eject function, as if using the Fn + delete key combination.  The Fn key does not stick. This works for all the other key combos.  I have all the updates. I lived integrated help and support, convenience stores, several research and MS Knowledge Base online. I have not knowingly changed anything. Any suggestions?

  This isn't something that Windows can help you to, the implementation of functions Fn on the abstract material level.  Windows operating system doesn't 'see' this key (indeed this Fn button is not to dismiss the screensaver).

  Most likely, there is some type of "Fn Lock" that has been activated.  But you really want to contact Samsung directly to find out how to disable or to work with her.  The controls/options so that it will apply only to Samsung and is not part of Windows.