For Satellite 5200 recovery disk does not work

Hello

I try to use the recovery for Satellite 5200 disk but it won't work. I have the recovery disk in the DVD player and I tried holding C and also tried to change the boot sequence by pressing F12 at startup to the top but he's not in it.

Someone at - it ideas?

Advertisement

Is there a problem with the drive while the OS is running? Try to use different bootable CD and see exactly what is happening.

Tags: Toshiba

Similar Questions

  • For Satellite L450 recovery disk does not work

    My laptop's daughter was so slow, that we decided to take it back to factory settings. There is no disk recovery with the laptop because it has the repair work however when we did the computer is no longer started upward and when we started it in safe mode, the repair option was gone!

    I've then went to Toshiba.eu and bought the recovery disc, seem to work, load files etc and then says loading windows, but the screen just goes black.

    I can't find a phone number or contact point on the invoice and if I will have to consider in a shop to repair I don t want to have paid for both disks that do not work!

    I do something wrong or can any one help?

    Thank you

    New laptops are available with preinstalled operating system and without recovery disk but in user s manual is clearly described that you can create this preinstalled software recovery disk Toshiba Recovery Disk Creator.

    I m wondering really you didn't mark this option.

    In any case, try to reuse this disc to see if the problem occurs again and again. If you will not be able to install the original recovery image I recommend you contact the nearest Toshiba service provider and ask for help.

  • Satellite P100 - recovery disk does not work

    After getting some annoying adware that I couldn't get rid of, I decided to format my hard drive and my notebook back to factory... something that I couldn't do.

    First of all, I inserted the disc, and in no way I couldn't take. I tried to run on the start menu, I browsed the records and sought some sort of file that would open up the normal Wizard... etc... nothing... I rebooted to see if it would start... nothing...

    I went into the setup (f2) and asked him to initialize the disk. He then says "Loading ram disk image" with a progress bar... the bar ends, the screen empties and that restarts, get to the same point and restarts continuously.

    I found this thread with a guy with exactly the same problem here:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17094

    He described his solution, but I have no idea what he's talking about.

    I got this 'product Recovery DVD-ROM' and no other discs. I can't get into windows, I can only get f2 and the parameters it and watch it to restart... I can't do anything with it at all.

    Stunned by using the made recovery disc my laptop unusable as before when it was just annoying ad sites in...

    Any help would be appreciated.

    Alissa

    Hello

    I checked the link in your ad, and the other person started the laptop with the Linux Boot CD to format and delete partitions on HARD drive integers.

    I recommend to do the same thing. Delete the partitions and format the drive HARD and then try to recover the laptop with the Toshiba Recovery CD supplied.

    Good bye

  • For 1000-zx satellite recovery disk does not work

    XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

    Hello

    Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
    However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
    In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

    Good bye

  • Satellite A50 - recovery disk is not working

    Hello

    I'm trying to do a clean install on my laptop, but the recovery disk is not working.
    The files transferred to the laptop, but once done, I get an error message that says: "the system is not fully installed. Please run Setup again."

    Does anyone have suggestions as to how to fix it?

    It took me four days to get to this point and make me very frustrated.

    Thanks heaps

    Naomi

    Hello

    What is the installation using another CD; That is to say the Microsoft Windows XP disk?
    Have you tried that?

    In my opinion, this would help to pinpoint the problem
    The error message can be linked to different issues; I mean the HARD drive or a single partition problem could also be possible.

    Try to format the drive HARD whole again. Delete all partitions from the HARD drive and check if you can proceed with the installation.

    But if you will not be able to install the OS by using the recovery disk and other disks then a question must relate to a part of the material. (possibly HDD)

  • Satellite C650 - error reading disk and the recovery disk does not work

    Hello

    I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.

    I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.

    Does anyone have any ideas as to why this is happening?
    I tried to start my computer acer laptop from the recovery disk and it worked fine.

    As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?

    Any help would be appreciated, thanks.

    On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.

    But there is something else:
    > I made a Windows 7 recovery disk using my other computer acer laptop...
    Sorry, but I don t understand this. Can you please explain what you did exactly?

  • Satellite L350-170 - recovery disk does not work

    Hello

    I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

    I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

    Thank you
    Jackie

    Hello

    Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
    Please check that would help determine if the problem is related to the computer laptop or recovery disk.

    Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

    However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

  • Satellite A30 - 203 - recovery disk does not work

    Hi all

    I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

    Thank you

    Hi dimation,

    It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

    In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

  • Satellite A100: Recovery DVD does not work

    I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

    I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

    However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

    What is the problem with that? How can I really use this recovery DVD?
    Someone help me please.

    Thank you.

    Hello

    The recovery procedure is not difficult.
    Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

    Your problem is very strange. You have created all the partitions on the HARD drive?
    I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

    Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

  • Vista recovery disk does not work

    my recovery for a6057c disk will not work after that I used the NeoSmart
    recovery disk.

    After logon to Vista I see that empty office, I can access the task
    Manager by CTRL - ALT_DEL.manager.

    Windows and all my files are on drive D and my C is the drive has nothing on this subject now. I'd do it
    I just want to make a disaster Recovery and
    all over again with new factory. Does anyone have any ideas?

    I now remove the prtition C on my drive.

    Vista still labels the d drive, I have no C?

    I found the answer on the Microsoft Knowledge Base.

    Item number: 947288 primary partition drive letter designation is lost when you use WinRE to repair a GPT in Windows volume

    The article is also for Vista.

    Article ID: 223188 How to restore the drive letter of the system / boot in Windows

    Would do the same thing.

    I took the article to use regedit to swap my C & D return records.

    Now windows Vista starts OK. (All I had before was just an empty office).

    I also received my HP Factory disaster recovery disks it looks they will work if I need.

  • I'm trying to recover my Windows Vista, but one of my #2 recovery disk does not work... What can I do?

    I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!

    THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:
    INSTALL WINDOWS
    WINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.

    AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!
    YOUR HELP WOULD BE GREATLY APPECIATED! THXS
                                                      

    Contact the computer manfacturer, who provided the original discs.

  • Recovery disk does not work now I have installed a new hard drive.

    I replaced my hard drive on my laptop HP - computer pavilion dv7 notebook. My recovery disks do not seem to work now, I get to 62% completion and then the error message "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. "Error code: 0xe0ef000e" do I need to buy a new HP recovery discs? Thanks, Nick

    Hi, Nick:

    Unfortunately, I don't have any experience in troubleshooting these special software installations.

    We should expect to download and install.

    If they are not, I have no tricks up my sleeve for you to try.

    I recommend starting a new thread describing your questions with this software and hope that someone else in the support forum can help you with these items.

    See you soon,.

    Paul

  • Recovery disk does not work for Satellite A100-197

    I'm working on an A100-197, which would not boot into normal Windows, but was able to start in safe mode.
    I used MSConfig to disable all startup and other services. Not good.
    I used the system restore. Not good.
    I have scanned for viruses, rootkits, etc. None found. Not good.
    I copied data to another hard drive in SafeMode with network and inserted the recovery DVDs.
    Through unpacking and got message saying to remove DVD - did this and system seems to freeze.
    Click the exit button and it restarts, but Windows froze (the movement stopped moving blobs). Tried safe mode
    but got a message saying that the installation of the system has not finished.
    Tried the recovery again, but this time I left the unpacking screen 100% of the overnight to see if
    He has nothing. There can be no. Click on exit and got the same as above.
    HDD formatted in partition magic and I tried again. Not good.
    Created 5 GB FAT32 partition and DVD files copied to the FAT32 partition. Tried to run the decompression program
    back. He refused to run in DOS mode.
    I think that connects the hard drive on another machine and RecoUnpack.exe a work PC running to
    unzip the files on the laptop HARD drive image, but this is crazy - the recovery disk is supposed to retrieve the
    System. What else can I try?

    GMC

    I would say that you have some serious hardware malfunction. Have you ever tried to check the RAM and the processor?
    In your case, I would try to run the UBCD4Win (www.ubcd4win.com) and superPI allows to see if the RAM is faulty.

    It could also be another component such as the motherboard or something on the motherboard (graphics, sound, some capacitors)

    It s just a suggestion, but you could really give my hint a chance. ;)
    I would also try another HARD drive in this machine, maybe the controller from your old HARD drive disappeared...

    Welcome and appreciate all comments

    Dennis

  • Satellite L300D-202: restore using recovery disk does not work

    Good afternoon

    Wonder if anyone can shed some light on this error message I get when trying to restore my laptop...

    «Setting permissions V:\HDDRecovery...»
    V:\HDDRecovery the system cannot find the specified file
    Unpack the WinRE...

    L ' ImageX for Windows tool
    Copyright bla...

    Opening the file in error [V:\HDDRecovery\SWImg\06546XSP.svml
    ERROR: ImageX could not apply WinRE V:\HDDRecovery\SWImg\06546XSP.svm index 1 of the HARD drive to W:!

    Press any key to continue... »

    After that, I find myself with the Toshiba Recovery with no action software and a screen BACK Active but nothing happens...

    I'm guessing that lack of HD, received today from Toshiba for this system recovery media

    Laptop is:
    Satellite L300D 202

    NB. If I restart the laptop start date and shows BOOTMGR is missing Ctrl Alt Del to restart...

    Any help appreciated,
    Thanks in advance,

    Rick0684

    > NB. If I restart the laptop start date and shows BOOTMGR is missing Ctrl Alt Del to restart...

    Hmm... for me, it seems that the laptop does not start from the disc (DVD), but it attempts to boot from the HARD drive...

    In any case, have you tried to boot from another disk; for example, Win XP, Linux Live CD?
    To do this, and check if it is possible... If Yes, format the HARD drive and try to boot from the recovery again disc!

    PS: Have you tried a HARD drive recovery option?
    Turn on the unit, press F8 and choose fix my computer
    After that, select Toshiba HDD recovery option if possible.

  • Satellite C670D - 11K - Toshiba recovery disks does not work

    I tried to recover the Satellite C670D - 11K using new factory system recovery disks provided by Toshiba. Both drives do their thing until the end when I get these messages:

    Files\mcafee\virusscan/dat\000.0\avvscan.dot c/program Error (error = 1117)
    Error restoring image
    request could not be performed due to the i/o device error
    Error image x could not apply for win 7 V:\\HDDRecovery\SWIMG\15434XSP. Water rain Index 2 in c HARD drive management

    Only option after this point is to press a button any and I get the white screen Toshiba

    When I turn on the laptop I get message "boot mgr is missing." I tried the disc of recovery a couple of times since and things don't get any better. In fact I just get a black screen with cursor after

    Suggestions this is appreciated please? I was thinking of buying the recovery disks would be a solution simple but should I give in and go to a professional now?

    Thanks, Paul

    I assume you are using recovery discs that you created using Toshiba recovery disc creator tool, right?
    It seems silly now, but something went wrong and I m afraid recovery disks are now useless. It turns out that you can't change anything or force the cell to the recovery image installs successfully.

    The only thing you can try is - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm
    I don't think this will help, but you can test it in any case.

    Now, you have two options:
    -for the restore disc original order from Toshiba
    -install the clean version of the OS by using the Microsoft installation disc

Maybe you are looking for