For Satellite Pro M70-220 port replicator

Similar Questions

• For Satellite Pro M70-220 laptop cooling pad

  I want to buy a block of cooling for my laptop Satellite Pro M70-220 (PSM75E) and would appreciate advice and recommendations on the most appropriate cooling pad. Plateau broken down to use the desktop, rather that the tower would use.

  The dimensions of the base of the laptop are about 34.5 cm (W) x 24 cm (P) - (or 13.5 ins (W) x 9.5 ins (D)).

  The laptop has 2 vents in fan - a vent is located on the left side (half back) of the laptop, and other the vent is located on the left side of the base in line with the side wind. Subject to correction, I feel that the cold air is sucked through the vent base and is blown through the vent on the left side. If that is correct, then I guess the cooling pad fan would blow air on the basis of the laptop, thus completing the airflow of the computer laptop cooling fan.

  Thank you

  Alan CB

  Hi Alan

  Before starting to discuss cooling pad, I want to ask you why you need. I have Satellite M70-159 and have never even think to buy this extra part.

  Have you ever watched on the net and found something that may be good enough for you?

• 160 GB hard drive update for Satellite Pro M70 - 220

  I want to upgrade my satellite Pro M70-220 portable HARD drive the current 60 GB HDD to a 160 GB HARD drive and you drive would be grateful if someone could provide information on the standard/type of HARD drive I should like being looking for and, if possible, specific manufacturer's recommendations and the model number of an appropriate 160 GB of disk HARD.

  Thank you

  AlanCB

  Hello

  The laptop uses a simple 2.5 SATA HDD.
  It's not really important what the speed of the HARD drive is supported, but I recommend to use the 5400 RPM or faster 7200 RPM HARD drive

  Generally all HARD drive size should be compatible because the SATA controller has no limitations.

• Advanced for Satellite Pro A120-105 port replicator

  Hi all, I'm a Satellite Pro A120-105, but he's only got the basic spec ports and I want to get the III or III advanced port replicator + I need a firewire connection.

  What replicator is compatible with the model of laptop above?

  Hello Anthony

  All laptops can be connected to port replicators have port replicator port in the lower corner. Are you sure that your laptop have such port too?

  I ask this question because the specifications of laptop for your laptop model says that there is no such port on your laptop model. Check it out!

• Satellite Pro M70-220: Microsoft Kernel DLS driver reinstall

  I'm having a problem with the "Microsoft kernel DLS synthesizer" (on my laptop Satellite Pro M70-220).
  that very well, I would appreciate some help to solve.

  My questions are in * "BOLD" type * at the bottom of this post.

  In the device under the "Sound, video controller & games" Manager type of device, I found a yellow exclamation point
  mark against "The Microsoft kernel DLS synthesizer".

  When I right click on the entry for device 'Microsoft Kernel DLS Syntheizer' and select 'Properties', the
  more info is given under the general tab:

  Microsoft kernel DLS synthesizer
  Device type: sound, video controller & game
  Location: Location 0
  Device status: Windows cannot load the driverfor of this hardware device. The driver may be corrupted or
  missing (Code 39)
  Click Troubleshoot to start the troubleshooter for this device.

  Before clicking on the resolution of the problems, I checked the info on the "Driver" tab, which is:

  Microsoft kernel DLS synthesizer
  Driver provider: Microsoft
  Driver date: 01/07/2001
  Driver version: 5.1.2535.0
  Digital signer: Microsoft Windows component Publisher

  When I click on the button "Driver Details" tab driver, the information given is:

  Microsoft kernel DLS synthesizer

  Driver files:
  C:\Windows\System32\drivers\D.music.sys
  C:\Windows\System32\drivers\lvusbsta.sys
  C:\Windows\System32\drivers\Tvs.sys

  Provider: Microsoft Corp.
  File version: 5.1.2600.5512(xpsp.080413-2018)
  Digital signer: Microsoft Windows Publisher

  On the 'Détails' tab in the properties box, the given info is:

  Microsoft kernel DLS synthesizer
  Device ID of Instance
  \DMUSIC SW\ {8C07DD50-7A8D-11D2-8F8C-00C04FBF8FEF}

  * Troubleshooting: *.
  When I click on the "store" on the general tab, a page "Toshiba Help & Support" is displayed.
  who gives the instructions to uninstall and reinstall the device. Uninstallation instructions are simple:

  Go to Device Manager > right to uninstall click Device > click Surdesinstaller > in the "withdrawal of the device confirm.
  Dialog box, click OK.

  My concern is with the "relocation of the device" instructions, which are:

  Close all programs > start the Add Hardware Wizard > click Next and Windows Search Plug &
  Play devices.
  If no device Plug & Play are found, a list of devices appears > click on "Add a new hardware device" > click Next > click
  "manually install the hardware that I select in a list" > click Next > in the "Common material Type" list
  Click the appropriate device category > click Next > in the manufacturers list, click the manufacturer of your
  device > in the "Models" list, click the name of the model OR click "have a disk, if you have an update or
  the manufacturer provided to install for your device driver > click Next and follow the instructions in the wizard
  to complete the installation.

  * Issues: *.

  * 1. What is "Microsoft DLS synthesizer" and what is its role? *

  * 2. Is "Microsoft DLS synthesizer" a device of internal device, as opposed to a 'Plug and Play '? *

  * 3. With respect to relocation instructions: *.
  * - what category of device "Microsoft DLS synthesizer" would be listed under? *
  * - in the list of "models", what the "model name" would be for the "synthesizer DLS of Microsoft? *

  * - for 'Disc' alternative option, where can I get/download a update or provided by the manufacturer *.
  * driver for "Microsoft DLS Synthesizer" of? *

  * - one disc 'a' Wizard allow you to select the folder on the hard disk that contains the *.
  * Downloaded (s)? *

  Note: I'm leaving the principle that the driver is corrupted so I'll have to download and install
  the uncorrupted driver.

  * Please indicate if there are any other installation information that I'm aware of.*

  Thank you very much for any assistance anyone who can offer.

  AlanCB

  Hello

  I've never heard of the Microsoft kernel DLS synthesizer and that's why I studied a bit.

  I found this MS developer site:
  http://msdn.Microsoft.com/en-us/library/aa940369.aspx

  It is said:
  The component of the Microsoft kernel DLS synthesizer provides the port of DMusic, content class miniport driver in the dmusic.sys file

  It seems that most of the problems with this kernel occur due to lack of SP2.
  If you have installed Windows XP you need to update the operating system to the State.
  All service packages must be installed!

• Re: How to use Recovery Expert Mode in Satellite Pro M70-220 product recovery CD

  I would appreciate advice on the following points.

  My Satellite Pro M70-220 (PSM75E-00D008G3), portable computer has 4 partitions created by Acronis Disk Director costume v9:

  C: OS - Win XP Pro SP3
  D: programs
  E: data & downloads
  F: backups

  After you start the laptop in Win XP, I inserted the recovery CD Toshiba in the DVD - RAM drive
  and sailed to the BMP file, R:\G_INST\BMP, where I found the file "menu.bmp", which gives 2 recovery
  Options:

  * 1. Retrieve entire hard drive *.
  Caveat. All data stored o your computer will be lost.
  Preinstalled software factory will be installed.

  * 2. Recovery expert Mode WARNING: *.
  This is for PC experts only.
  Preinstalled software factory can be installed on an existing partition.

  My questions are linked using the "Recovery Expert" Mode:
  -I'll be able to use the "recovery of the Expert Mode' the recovery CD to reinstall Win XP Pro (pre-installed software factory) on my C: partition, while affecting only not partitions D, E & F?
  -I'll be able to format the C: partition by using the "Expert recovery" Mode, without formatting of other partitions?
  -What is the exact procedure of "Expert Recovery Mode"?
  -where can I find more information on the procedure of "Expert Recovery Mode"?

  Thank you

  AlanCB

  > I'll be able to use the "recovery of the Expert Mode' the recovery CD to reinstall Win XP Pro (pre-installed software factory) on my C: partition, while affecting only not partitions D, E & F

  Yes, this should be possible. Using the Expert Mode of recovery, you should get the ghost window where you can select the partition where the OS is to be installed. In this case only that partition would be formatted.

  > will it be possible to format the C: partition by using the "Expert recovery" Mode, without formatting of other partitions?

  Yes, theoretically it should be possible.

  > what is the exact procedure of "Expert Mode of recovery"?
  As I mentioned above, this mode allows you to restore the operating system on a partition of some and only this partition will be formatted.

  > where can I find more information on the procedure of "Expert Mode of recovery"?
  What looking here in the forum?
  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=7302ᲆ

• Satellite Pro M70-220 - how to start the Advanced Boot Menu

  Which key have to press on my Satellite Pro M70 - 220 starting Win XP, in order to enter the "Advanced Start Menu" - in other words, the menu that gives various boot options, such as safe, last good start Congiguration, start Windows Normal Mode, etc. ?

  On my old laptop Satellite 5105 - S702, it was the F8 key, but by pressing the F8 key on my M70 Pro does not bring up the 'Start Advanced Menu".

  The Advanced Start Menu came on its own a few days previously after an abnormal stop, so it seems that it does not exist on the M70 Pro.

  Thanks for any advice anyone has to offer.

  AlanCB

  Hello

  The Advanced Boot Menu can be reached by pressing the F8 key.
  It s a Windows menu basic and it s any laptop it is.
  It should work on all computers.

  Maybe you can not activate the Start Menu advanced because the Windows operating system is confused upward.

• External USB floppy drive for Satellite Pro M70

  I just bought a Satellite Pro M70 Centrino Mobile 750 to replace my Satellite 5105 - S702, which exposes the same type of problems of corruption/crash video display described elsewhere in these forums.

  I need an external floppy drive, and the site of the Toshiba shop specifies an external USB Floppy Drive Ref. PA3109E-3FDD.

  However, I have an external drive USB Floppy, Réf. PA3109U-1FDD, I bought for the satellite 5105-S702 about 4 years ago.

  5105-S702 has USB 1.1 ports and satellite Pro M70 has USB2 ports.

  Issues related to the:

  PA3109U-1FDD will work with the satellite Pro M70?

  There are likely to be problems of compatibility, driver issues or any probability/possibility of damage to the Sat ProM70?

  Would appreciate any advice.

  Thank you

  AlanCB

  Hi Alan

  I really don? t know why you ask if the floppy drive will not work. Why you don? t he try? As far as I know, it should work and you should not buy a new one.

  Just for info: a few months ago, I saw the Toshiba FDD drives with part number PX? And these drives are not bootable but on the lower side, there is a label with this information.

  Anyway, you can use your other more ancient. According to the specification tested for MS M70 is FDD Drive Kit PA3109U-1FDD (your one).

  Good luck

• Expanded for Satellite Pro M70 PSM75E memory

  I need memory paged to my Lotus Symphony programs.
  But it does not work in this PSM75E-009005DU Toshiba Satellite Satellite Pro M70 with Windows XP.
  On my desktop with XP, it works... I can set it up in preferences shortcut on the screen.

  If you want to upgrade the memory?

  As far as I know, Satellite Pro M70 PSM75E was equipped with different processors and chipsets for upgrade memory can depends on model that you bought

  But I think you could increase the RAM up to 2 GB of RAM.
  You can use the modules of 533 Mhz 200pin 2 x 1 GB of RAM.

• Updates the drivers & utilities for Satellite Pro M70 (PSM75)

  How do you know if there are any updates available for the Toshiba drivers and utilities provided with my Satellite Pro M70 (PSM75), the Date of Production - January 27, 2006, and which are in the folder Toolscd (C:\ ToolsCD) on my laptop?

  Is there an update Service that recommend updates available for download?

  I checked the list of available downloads on the download page of the site of Toshiba UK ([http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK]), for the satellite Pro M70 (PSM75) and compared the version numbers of downloads, against the same drivers & Utilities version numbers in the file Toolscd (C:\) ToolsCD) on my laptop (IE in the XML TVersion files), and they are exactly the same, even for 16 drivers and utilities with a "Date last modified" on January 17, 2006 or newer (with new - August 1, 2008)

  The only real update which seems to be offered as a download, is the update of the BIOS v1.50 - WIN (in the BIOS downloads), with a 'last modified Date' of August 7, 2007, for which there is no equivalent in the Toolscd folder.

  Thank you

  AlanCB

  You can also check this page for the latest updates, as appropriate:

  http://EU.computers.Toshiba-Europe.com (Support & downloads)

  I don't think that there is any tool, which continues to tell you that there are new updates available. For Windows, it is clear, that you can use the Windows Update feature. It has some function implemented tools can look for hardware drivers too.
  But for the rest, just keep on visiting the above mentioned page from time to time.

  In any case, if your computer works fine, you will not need any update.

• For Satellite Pro M70 boot sequence

  Issues related to the:

  1. What is the default setting for the boot to the Satellite Pro M70 sequence?

  2. What is the procedure for changing the boot during the start-up phase sequence?

  3. What is the most 'sensitive' boot sequence, with & without an attached external floppy drive?

  Thank you
  AlanCB

  Well, I'm not 100% sure but I think the default start setting is:
  DISK HARD-CD/DVD-FDD-LAN
  However, you can set and change parameters in the Toshiba HWSetup that is located in Control Panel.

  Just FYI: by pressing a key during POST, you can choose the boot device.
  D - default system
  U USB FDD
  1 - disc HARD bed
  2 - slim select bay (if available) HDD
  C - CD rom
  N - network LAN
  P - PC HDD (PCMCIA) card

  But these options are not always available.

• Video capture with a satellite Pro M70: which ports and drives can I use?

  I want to edit my home movies on my Satellite Pro M70 using WXP Pro (win dvd or movie maker). I want to capture video from my panasonic camcorder that has digital strips. What are the ports that I can use and what cables do I need? I'm desperate to edit my recent wedding video to put on DVD and mail it to my mom. The panasonic website has ignored me! Any advice anyone?

  Well, as far as I know this unit has only one S-video output port. In this case, you can connect the laptop to the TV and look at the photo of laptop to TV but it of not possible to receive all the signals of TV or any other device on your laptop.
  To receive the signals, you need a composite or a s-video port.

  However, if the camcorder has a firewire if port you can send digital files through the firewire connection. But this should only work with digital files that are saved on the camcorder.

  Please also visit these helpful sites:
  http://www.Camcorderinfo.com/content/connecting_cam_to_computer.htm
  http://www.Educ.TTU.edu/HOWTO/Vid_Room250_Connections/vid_connections.html

• HDD upgrade for Satellite Pro M70

  Is anyone know the upgrades available to change the standard 60GB hard drive in the Satellite Pro M70 (PSM76E-00100KEN) with something bigger.

  The Toshiba Options site shows only optionally available external hard drives, but noticed that the newer models of the same family have between 80 and 100 GB discs, so I asked if any of these would correspond, for example:

  PSM75E-00P004EN uses a 100 GB drive
  PSM76E-00500KEN uses a 80 GB drive

  You can also all drives available from other sources that might be suitable - what spec should I look, speed, installation size, connections etc. and BIOS compatibility

  All the info appreciated, surprising how fast the disk fills up, and I would like to keep in-house, although I also use an external drive of 250 GB for home storage and backups etc.

  Thank you
  Steve

  Hello

  The Satellite Pro M70 series is great, but I think that every m70 must support a HARD drive with serial - ATA interface.
  Some units have been delivered with a 80 GB HARD drive. In my view, that a 100 GB HARD drive should also work.

  I found a few properties of the HARD drive:
  Rotating disk: 5400 RPM
  Buffer size: 8 MB
  Number of discs: 2
  Number of Heads: 4

• Vista drivers for Satellite Pro M70 mass storage

  Hello everyone. I would like to know if there are and where I can download updated device driver for my Satellite Pro M70 (PSM 75-E) mass storage. I tried searching but I found nothing.

  All other drivers are ok. Infact for audio drivers I used the Xp one and it's ok. The only one who is not installed is a 'mass storage device' I think it's for multireader memory card. Can someone help me? There is a way to install the Xp drivers as for any other material?

  Thanks for any response.

  Hello

  Driver Toshiba page provides all the Vista for the Satellite Pro M70 drivers!
  Only the BIOS and driver Vista BT's are available for this laptop.

  I checked the XP section and Cardbus driver and Chip Set Utility are available.
  I guess that these two applications are required.
  I m do not know if you will be able to install these utilities on Vista, but a train is free.

  If the two applications will not work I guess you have to refrain from the use of the reader of memory card on Vista.

• The update of the BIOS for Satellite Pro M70 does support TPM?

  Hello

  There was an update of the bios that is specially designed for Vista... = bios-vista - 510win.zip on the Toshiba site...

  Although my Satellite Pro M70-113 did not support the default TPM module (BIOS verson 1.1, I always have this), is it possible that this update includes the TPM secure to enable bitlocker on vista?

  Can someone check and confirm please... :)

  And secondly, is configuration BIOS update for Windows utility saves the current state of the BIOS in some external as backup media, while if it happens with the process of update... the previous version can be restored in return?

  And a BIOS may be downgraded?

  Thank you.

  Hello

  (1.) I m not 100% sure but I think the new BIOS for the M70 does not support the TPM secure. I read somewhere that all BIOS versions that support TPM on Toshiba laptops cannot be updated by a common user, but the user must contact the authorized Toshiba service provider for these updates.
  That's why I think that Toshiba would not any BIOPS version by download issue if this BIOS would support the TPM.

  2.) now something about the second question:
  The new BIOS version replaces the old BIOS and BIOS States and to my knowledge it of not possible to save the settings for a backup more later.
  Generally, you must be careful with any update of the BIOS. Bad BIOS or bad update procedure may damage the jury!