For Scanjet G4010 scanner software

I used a G4010 with Win XP and when I changed to Win7 the scanner software will not work. I get the message of the solution Center HP that installation is not complete. Scanning works in Windows mode, but now I can't scan slides and negatives. I downloaded fron HP homepage upgrades.

The software you use, mini, likely out of date for Win7. Follow the link below, then select your operating system (you need to know if it's 32-bit or 64-bit).

http://goo.GL/1ae8H

Complete the installation and let me know if it works!

Tags: HP Printers

Similar Questions

  • ScanJet G4010: Driver TWAIN for ScanJet G4010 (L1956A)

    Does anyone know if there is a pure to scan TWAIN driver subject; not the one that comes with the HP software?

    Hi!, Bill103:

    I installed in my HP Omni PC120 1026la, with 10 64-bit Windows edition and I use, for analysis in my HP C4180, Irfan View. Is very easy... http://www.IrfanView.com/64bit.htm

    See, this video...

  • HP Photosmart software for scanner Scanjet G4010

    I upgraded my computer to an HP Pavilion with Windows 7 64-bit OS.  I have a disc for the HP Photosmart software for my Scanjet G4010 but it is Version 9.0 for Windows Vista.  Where can I get a copy of this set of programs for Windows 7 that I can install it.

    Hello RichardM02

    The product that you have is a commercial scanner. I suggest you post in the HP Business Support forum for a better chance to find a solution.

    You will find the Board Commercial Scanner here.
    http://h30499.www3.HP.com/T5/scanners/BD-p/BSC-418

  • HP Scanjet G4010 Windows 7 software problem

    I recently updated my computer to Windows 7 and installed the latest drivers and software for my old scanjet G4010.  It will scan using the button on the scanner, but I can't adjust scanning settings (picture of quality, where the harvest, etc.).

    BUT the scanner software does not work. This brings me through the installer without any problems until it reaches the actual scan wick. By clicking on finish, there is no process of scanning, and nothing is recorded. Have you tried several places, but... nothing.  Not in a satisfactory way, such that it has reduced what was a versatile workhorse to a silent photocopier.

    Is there a solution?

    Hi Paul2001,

    I understand that since the upgrade your OS to Windows 7, you are no longer able to use the scanning software.

    I would like that you start here: 'No. Scan Options' or "scan settings are not defined", that will guide you through the troubleshooting steps and also the possible solutions.

    I would like to know if it was useful, if you have more questions please let me know.

    Thank you

  • ScanJet g4010 - software do not install windows 8.1 - 64 bit

    I recently had to upgrade my computer - I have a HP Pavilion with Windows 8.1 (64-bit).  I have a ScanJet G4010 and can't do the drivers/software to install.  I've disabled my anti-virus (McAfee) and downloaded.  When I click to open the download it asks my permission to change settings, etc... and that's all.  It won't go any further.  Any suggestions?

    In fact, I found and installed the new scanning HP for Windows 8.1 software - which is HP Scan and Capture (you can buy it in the outlook store).  It seems to have solved my problem and my scanner works fine.  Now, I just have to settle with the new software.

  • Can not scan (HP Scanjet G4010) for printer (HP Deskjet 6980) since my Mac OSX 10.9.2 update

    Hi, since the update my Mac OSX 10.9.2, I can not scan to the printer. When I look at 'Printers and Scanners' under ' preferences system, the printer is (HP Deskjet 6980), but not the scanner (HP Scanjet 4010) and I can not add the scanner to the list. " I am able to print items off the computer, but cannot scan and print. When I printed a report on the printer page, it says that it its status is "offline." Any suggestions?         Thank you!

    Hi there Bulldogs3, welcome to the forums!

    I saw that you encounter a problem when you try to add your Scanjet G4010 to your Mac up-to-date 10.9.2. If you have not yet downloaded the installation for the Scanjet, please do it here: HP Scanjet ICA software for Mac OS X 10.6, 10.7, 10.8 or 10.9.

    If that is not always do the trick, follow these 2 steps and add the printer and back scanjet.

    1 mac OS x: how to reset the printing system

    2. repair disk permissions

    I hope that helps you.

    Good luck

  • Scanner not found - Mac OS 10.11 El Capitan with HP Scanjet G4010

    Hello

    I need help, it's driving me crazy. The last time I've used this scanner was a few days ago and now its does not work.

    I'm Mac OS 10.11 El Capitan with HP Scanjet G4010, it's a plugin via the USB port.

    I went on HP website for maybe update the driver, it seems that one does not exist?

    I have unplugged and restarted twice and re-downloaded the 10.10 OS driver, just in case and nothing.

    If I run the application image capture and the scanner appears under devices, research for a minute, then says "no camera or scanner connected."

    Thank you!

    Hello

    Any compatible OS listed in the download section, it is incompatible with El Capitan.

    You can try the drivers of Yosemite and check if they might work on the newer operating system:

    http://FTP.HP.com/pub/softlib/software13/COL53041/DP-154741-2/HP_ScanJet_v2.4.1.dmg

    You can give also the 3rd party VueScan request a test, it seems to support your scanner without the need of additional drivers:

    http://www.Hamrick.com/VueScan/hp_scanjet_g4010.html

    Shlomi

  • Lack of availability of software driver for ScanJet 3300, WHY?

    Why Microsoft has not published software driver for Win 7 compatible with the ScanJet 3300 being...?
    Is this a ploy to force consumers to the perfectly material trash to work for love to upgrade your operating system or what...? Please, can someone there answer for me...? I'm stumped...

    Very simple to answer:
    Microsoft does not support your Hewlett Packard ScanJet 3300 C.  The fact of Hewlett Packard.  If Hewlett-Packard does not release a driver for one of their products for a given operating system (or even a level of service pack of the operating system) is the choice of their (Hewlett).

    Microsoft does not have the drivers for * any * Unit of material that they do not manufacture.  It is in the millions of devices and not a very wise decision from ANY point of view.  Support for your hardware devices in * any * widely used operating system is the manufacturer of the material - they are the only ones with a vested interest in your use of their product over another happens to support the operating system, you have chosen to run.

    Just to make sure that the lack of support in Windows 7 is interpreted as a problem of "lack of support from hardware manufacturer" as opposed to something else... I decided to quickly do a simple search for your product in reference to Windows 7:
    "Windows 7" ScanJet 3300

    And the first thing I found was the following:
    Report of the Compatibility Center Windows 7 for HP ScanJet 3300
    (You can also see the 32-bit version by clicking on the web page tab).

    Who says exactly what I have:
    "The device manufacturer stated that this product is not compatible.

    If you go to the HP web page for the product: Driver & Software Downloads - HP Scanjet 3300 c Scanner
    .. the first thing you see is that HP did not provide drivers beyond Windows XP (click on the drop down menu to select your operating system), nor for Macintosh or * nix.  There is a link on the page we can fly over who asks, "I don't see my operating system?" and answers, "If your operating system is not listed, HP has no software or driver downloads available for this product in that operating system."

    You can also see the queries on the HP ScanJet 3300 in the Microsoft Answers forum which shows the circumvention of some people in an attempt to stretch the life of this product (the State that and support which is something that Hewlett Packard decided to their product).

    Yep - that's the way it has always been.  You buy something and sooner or later, if this product works in conjunction with other products, that you upgrade one or more tof products to work with you will need to upgrade the original product too * if * you want to keep the functionality of this product gives you.

    This product (the HP ScanJet 3300) is old and outdated technology.  Quality, it can give you compares even with cheap (and I mean cheap - cheap) scanners that can be built in the more generic off-brand inkjet all-in-one on the market today (where ink will cost you more than a month given 6 period that initially the printer.)

    Looking at the Specifications for the HP ScanJet 3300 it is obvious that there are much better products out there in a size of comapact more and more features.  It is time to replace this equipment.

  • How to scan a document or photo to my all-in-one for my laptop. should I have the scanner software

    I tried scanning of photos of my all-in-one for my Samsung laptop without success. I need to download the scanner software?

    JoanRoger wrote: Scanner is inkjet HP 2060 advantage all-in-one K110 series. Laptop is the Samsung RV510 64 bit thanks

    Hello JoanRoger, here is the link for the package full feature software/driver for your printer All In One of 2060.

    I download and install this software. Do not turn on the printer or connect the USB cable before advised to do so during the installation process.

    Just to go to the linked page and the section Details and specifications, search for the DJ2060_K110_231.exe and click on the filename to download the file.

    This should allow the correct use of the printer All In One 2060 connected to your laptop.

  • Problem with the HP Scanjet G4010 on the computer.

    I've recently updated my Windows Vista computer to Windows 7.  I was able to reinstall most of my hardware & software.  However, my HP Scanjet G4010 is not recognized by the new system.  The software provided with the scanner for Windows Vista XP & a.  I downloaded the updates of the driver, the system assures me my driver is up to date, but when I try to scan, I get the message HP imaging device is not found.

    Every time he tells me that the download was successful, and yet, when I click on HP scanning icon, I get the same message.

    Not sure that after you download the file ("Download succeeded") you will need to run the file by double-clicking on it?  Or this sentence meant that "installation succeeded"?

    See if running HP's Print and Scan Doctor helps --> http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootDisplay/?sp4ts.oid=3236364&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03941207-7%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    and see

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c00820311-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1402373449630.876444892.492883150

  • ScanJet G4050: Desktop unable to see the drivers for Scanjet G4050

    I have a ScanJet G4050 that I can't make it work with my desktop computer (HP ENVY 700 - 210xt CTO desktop PC). The Office seems to think that there are no drivers for the device.

    I've recently updated for Windows 10 of 8.1. I had not connected the scanner before update (yes I know) so I honestly do not know if she would have connected before.

    I ran software installation from the disc, and then downloaded and installed software linked from the info Windows 10 on HP website.  Nada.

    My Device Manager Office lists the HP scanner which I assume is due to the installation of the software detects not the scanner because I told

    The drivers for this device are not installed. (Code 28)

    There is no compatible driver for this device.

    Watching the news on the events tab for the device, it is said

    USB\VID_03F0 & PID_4605\CN48JCB18105 device has been migrated.

    Device's last Instance Id: USB\VID_03F0 & PID_4605\CN48JCB18105
    The class GUID: {6BDD1FC6-810F-11D0-BEC7-08002BE2092F}
    Path:
    Migration status: 0x0
    Present: false

    I guess ' present: false "means that the device is not seen by Device Manager.

    Just in an act of desperation, I switched the USB cable in case it was bad, nada.

    OK, I'm completely and totally frustrated... and ideas.  If someone can point me in the right direction I would really appreciate it.  Pay $99 for technical support of time on a $180 scanner is not really profitable.

    @ErinContour

    OK, well - the information on the pages of the Web site support has been around since at least 2006 - so if the scanner is not believed, it seems at least some support information has been around for some time.

    I don't have the answer...

    ErinContour wrote:

    This scanner is aged a year... so little vintage. I mentioned, I installed the scanner, I installed the complete software off the drive before you download and update the software using the Windows 10 link on the HP site. I have the guide to the user, which in the circumstances is singularly useless.

    Still not clear. I guess I misunderstood - do not remove the existing printer software before installing the replacement defined on HP website.  Assuming you have done this, then 'all good '.

    Maybe it's nothing other than Windows 10 no no not necessary routines in place to support the scanner software.

    User guides vary - most recently, I think the documentation has improved substantually.  Unfortunately, in my opinion, a lot of the old guides (this one circa 2006) are not as including the type of information desired by many users / owners of the devices.  NOTE: This is a personal opinion only; I speak NOT of HP.

    There is a tool that you can try:

    HP Print and Scan Doctor for Windows

    No idea if the doctor will know what is happening.  Although imperfect, it is a good program...

    ----------------------------------------------------------------------

    If the scanner is connected physically and that the computer is aware of this connection and know the type of material, then you might be able to use a software program of scanning solution.

    Options of the digitization program

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • G4010 Scanner is no longer save scans since updating to OS x 10.9

    My G4010 scanner is unable to save the scans since the upgrade to Maverics. The OSX drivers also seem to, have been removed from the support web page. I can scan using Adobe Acrobat, which still uses the HP interface. Image capture reports no scanner available.

    Hi disteele,

    Unfortunately the scan software "TWAIN"-based on the oldest HP is not supported on the Mavericks. "."  Please click here for the software, you must install to scan using Capture of Image.

    Hope this helps,

  • I'm updating my scanner software & I get the message that the administrature must install this even though I am the administrature

    I have a HP Scanjet 4890 scanner which I need to update the software. I get the message that the administrature

    must have access. I'm the administrature that appear when I look in the program & at the start but I still get this message.

    Thanks for any help you can offer.

    Harry Millard

    E-mail: * address email is removed from the privacy *

    Hi, Harrison-LindaMillardII

    Try and reset the permissions right-click Run as Administrator option when you are finished.

    http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx

  • ENVY 4500: Lack of scanning for HP ENVY 4500 software after reinstalling the laptop

    Dear support,

    I got a HP ENVY 4500, installed on a laptop with Windows 8.1 and the HP Software scanner worked fine.

    I have recently reinstalled the same laptop but with Windows 10 Pro: the printer works fine but the scanner software HP is not available! I can't use all the features of the printer this way...

    My question is: why the HP scanning software is not available for Windows 10 Pro? I used the original CD.

    Where can I download the (new) 10 Pro software for Windows?

    Please help me solve this problem.

    Kind regards

    Carmine

    Hi all

    now, I have solved my problem: I install the Windows 10 soft "HP Scan and capture" from the Microsoft Store and it works very well with HP ENVY 4500 printer / scanner!

    Concerning

    Carmine

  • Compatible for Mac document scanner

    My need is for more information on the document scanner that has a good reputation with the IMac.  I have reviewed the product of Fujitsu and have excellent reviews from colleagues who own PCs. help, please.

    drjcg

    This list of compatible printers/scanners maybe hep you decide:

    Printer and Scanner software available for download:

    https://support.Apple.com/en-us/HT201465

Maybe you are looking for

  • How to compare two .tdms signals different files?

    I develop a lie detection system in labview.so Inorder for that I need to compare the physiological threshold signals in the file .tdms with signals that I acquire the object for each question asked.i continuelsy use breathing and heart beat monitor

  • Computer reboot several times

    Hello One of my friend's computer is restart several times as soon as it tries to connect to his computer... He has accidentally two anti software virus installed on his computer, and therefore, this problem exists... Please suggest me a solution...

  • Icon in the taskbar - common parameters of Dell

    I have a new 3847 Dell Inspiron running Windows 10.  An icon appeared in the taskbar that I can't do anything with except mouseover that shows 'Dell common parameters.  It looks like a white gear on blue background.    Can someone tell me what it is?

  • Language display button became unavailable after update

    Language display button became unavailable after update Hello! I use the Russian version of the HTC sense XE. After the last update button, triggering languages of entry become unavailable. So I can't type on my Russian servers. Someone knows somethi

  • Backup DVD of Windows 8

    I downloaded and installed Windows 8 without selecting the option to backup DVDs. Do I really need DVD backup when re - install or change the computer? I could do a backup later? Can I install my purchased Windows 8 on other computers. and how much?