For the first time, I tried to import three photos in sport and I had a pop box that said they could not be imported!  Do you know why this could be?

Is there anyone there to answer my question?

Tell us the EXACT Word error message in Word.

Tags: Photoshop Lightroom

Similar Questions

  • I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

    I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

    Hi Bobsirkus,

    The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

    Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

    You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

    Kind regards

    Tanuj

  • I am in charge for the first time.  How long should it take?  I check battery during the charge percentage?

    I'm charging my Apple Watch 1 for the first time.  It has been more than 2 hours, and it shows the green lightning when I touch the face.  How long does take to recharge?  Is there a way to check the level of the battery during charging?  How can I tell when it is fully charged?

    You can take a look at this page of the Apple Watch user's Guide. http://help.Apple.com/watch/#/apd2b717523a

  • I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. It's saying that the product may be false and it will not be installed. Any suggestions?

    I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. That is to say that this product can be wrong and it won't download. I downloaded before and didn't have any problems. Any Suggestions?

    Use one of the links below

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30-45 minutes

    I am trying to download CS on my HP Z400 running Windows 7 for the first time.  The installer won't boot.  It finally gives a "server not available" error after 30 to 45 minutes.  I checked to be sure there is no Adobe folder in my program files.

    Hello

    Please check the help below document:

    Error download or update Adobe Creative Cloud applications

    You can also view the nets below where the issue has been addressed:

    Error 207 to "install Adobe".

    Adobe creative cloud installation does not work. Get the error code 207. All solutions?

    Kind regards

    Sheena

  • get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

    get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?  Using Windows XP.

    Hi James,

    Let me know if the problem persists.

    Kind regards

    Nicos

  • iMac 5 k end of 2014 for the first time enable FileVault stuck Reboot

    Hi all

    I just got the FileVault on my iMac 5 k end of 2014 with fusion drive for the first time.  It is said that a restart is required. He could not restart and stuck on the black screen. No apple logo, nothing.

    Here are the steps I've tried

    1 restart by holding the power button and turning it back on

    2. reboot into recovery by now cmd + R Mode

    3. enter in disk utility

    4 did not have a first-aider for my drive of fusion

    5 tried by clicking file > open or remove encryption (both selections are greyed out)

    6. I tried to enter the Terminal. Typed in fdesetup disable (no command found, Ditto for sudo)

    7. click on the left upper Apple logo > disc start > selected my drive > chose Unlock > typed my password > selected reboot > same, stuck.

    I need help.

    Thanks in advance

    Hello. Please let me know if figure you it out. Your question sounds the same I am facing with my Mac mini (published earlier today). Turn on Filevault and all I get is a white screen.

  • Firefox crashes while loading images for the first time after windows starts upward

    every time I log on windows, Open firefox and load an image or a site with content firefox flash stops responding for 2 or 3 seconds and then returns to normal after that and everything is fine... it happens only when I open firefox for the first time after starting windows to the top...
    thing I tried
    Start windows and Open firefox in safe mode (does'nt fix the problem)

    updated 13 solved the problem...!

  • I m using firefox on mac. I used it for the first time on mac while I had put a lot of "separators" on the bookmarks toolbar... How to remove the xtra those? Small request that it creates big problems...

    Well not much description required in this case. I was using firefox for the first time on a mac and so was trying new things with this version of firefox. Just got stuck with these separators xtra... Can't find a way to get them off of my bookmarks toolbar...

    You can open the Bookmark Manager (Bookmarks > show all bookmarks) and go to the Favorites bar folder in the left pane.
    You can then remove the separators in the right pane.

  • Photo PhotoSmart 7520 tray is blocked when I try to print photo 4 x 6 for the first time.

    I just bought this 7520 and installed the software; then when I tried to print a picture for the first time, I kept getting the error message that the photo tray is locked (will not travel to bottom to pick up the blank photo paper) even if no clogging. The call centre could not solve the problem, and they ship me a replacement printer; but I suspect that this may be a common problem.

    I searched the post, and someone else had the same problem.  The solution is that the tab on the slide of paper size was outside the slide area.  I fixed it, and the printer now prints pictures.

  • Get the string invalid Base64 of image of toDataURL() for the first time in 10 of blackberry webworks

    Hello

    I need to get the Contact image converted to string Base64 using BB 10 Webworks (blackberry.pim.contacts) I get only the contact.photos [0] .smallFilePath which returns the path to the phonebook file.

    Now, I want to get the image of this path and convert it to a Base64 string.

    Here's the javascript code :

    var img = document.createElement ('Image');
    var canvas = document.createElement ('Canvas');

    function getBase64Image (p) {}
    img.setAttribute ("src", p);

    Img.width = Canvas.Width;

    Canvas.height = img.height;

    CTX var = canvas.getContext ("2d");
    ctx.drawImage (img, 0, 0);
    Return canvas.toDataURL("image/jpg");

    }

    This means bad Base64 string of image for the first time. When I convert this string to the image it displays white screen. But returns a string in the Mithraeum and after conversion, display a correct image.

    I use Blackberry Z10 (OS 10) for the test.

    I think that the canvas is not drawing image properly for the first time.

    I have searched and tried many things, but not got success. What will be the solution.

    Thanks in advance.

    My guess is that the image did not load the source completely still. Setting the src / image loading is an asynchronous event, which means that your code will continue to the next line regardless of whether the image has loaded yet or not.

    After calling setAttribute instead of execute the code of the Web, you will probably need define an event on img for the load event listener. Once the image is loaded, you can then use the img with canvas variable to retrieve its data.

    Note that getBase64 will return immediately, so you may need to develop some sort of mechanism to wait before returning, or the asynchronous approach and integrate reminders for the success trigger the next piece of code.

  • problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

    I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

    I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

    Sorry, the MSE tool is to set the MSE when its broken.
    UAC controller Tool v1.0 can be used to control the
    The UAC settings.

    However, I suggest you restart the PC and after BIOS hold the F8 key
    and when the Windows Startup Menu appears, select Mode safe mode with networking.

    Now, you will enter Safe Mode. On the page to connect, you will see the
    Standard Windows administrator click it to open a windows session, press and hold
    in mind, the password can be blank.

    Once you have done that make a new account administrator and giv it a name.
    Restart the PC. That you did this newspaper using the new account.
    Once you have done that decide what to keep with your current administrator
    account once you've done it restart the PC, BIOS hold down the F8 key and
    Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

    Go to control panel-> user accounts control and security for the family-> user accounts, then
    Select manage another account. In the list, select the administrator account
    your select and then delete the account, then it will ask you if you want to keep
    files etc, it's your own decision. Itknowledge24.com

  • Mouse and UI Lag, be ground immediately after turning on the computer for the first time.

    Hello

    I started using Windows 7 yesterday for the first time after using Windows XP since its release.  A couple of things, first off I noticed lag and be ground everywhere instead travel windows autour mouse, move the mouse on the screen, etc.  It will just freeze and jump around, is not no good whatsoever.  I have a wireless optical mouse Logitech, maybe this has something to do with it, because I tried to install the software for the mouse, and I got a weird error and something not to be in the right place (very annoying).  Nobody knows why, I'll have this lag?  It's really annoying and never happened in Windows XP.  Any ideas on how to possibly resolve this problem?  Thank you very much.

    Justin

    Programmer for Sony Online Entertainment.

    Try to use another mouse, or by downloading the new firmware drivers/mouse from Logitech for your current mouse.  Have you noticed the behavior if you start in safe mode?  Or if you perform a clean boot?

  • Cannot print photos he said Onenote open for the first time

    * Original title: printing images from a computer of windows 8

    OK im feeling really stupid and just frustrated now im trying to print a photo and it won't let me because it says I need to open a note for the first time first of all that I have someone please help me I really need to print this

    Hello Jordan,.

    I can understand how it can be frustrating when things does not work.

    This could occur if Onenote is defined as a default printer.

    1. What is the brand and model of the computer and the printer?
    2. did you of recent changes to the computer before this problem?
    3. what program you use to print photos?

    Allows you to change the default printer for you real printer then it should print correctly.

    Set or change your default printer
    http://Windows.Microsoft.com/en-us/Windows-8/set-change-your-default-printer

    Additional information:

    Print a photo

    Hope this helps, please answer with the State of the question for more
    assistance.
  • For the first time using BMP - app ever built, plugin file error constant

    Hello - I am trying to build for the first time and many plugins are errors. I am commenting them one at a time from the XML config and one of the culprits is the plugin file that I need to use. The other is the network plugin which also gives errors. The State errors that are not compatible with CLI 6.3.0

    I know it's the plugin developer to make compatible - y at - it something somewhere that indicates which versions of the plugins are compatible with versions of BMP? How can I find out what previous version of BMP is compatible with anything?

    Also, and this might be relevant to the question - when I look at the BMP to see what are the versions that I build for, I see that apparently I'm targeting iOS4.2?

    http://www.rickluna.com/pgb_err.PNG

    In my XML I'm deploying to iOS 9 but does not change the value of GBP v 4.2

    < preference name = "deployment target" value = "9.0" / >

    DRM for suggestions!

    r

    These plugins are all using the deprecated point rating. You must use:

    etc.

    Can I ask where you got to go to? I want to assure you that the resource is updated to the correct format.

Maybe you are looking for

  • Qosmio F20-149: need a cord for the United Kingdom?

    Hey guys,. I am looking for a power cord, taken UK, compatible with my F20-. 149.For the moment, I have a euro plug, but I need a UK plug. Does anyone know if there is a power cord for the F20?I have not found one in online stores. Thank you Christia

  • can the 2133 20 "2.4 ghz mid 2007 imac use 6 GB of ram

    can the 2133 20 "2.4 ghz mid 2007 imac use 6 GB of ram

  • Turn off activity on Apple Watch tracker

    I have a question about the Apple Watch. The phone is insisting that I complete all my physical data for watch monitor my activity. Then the phone will tell you how long you worked, etc. You can turn off notifications, but you cannot turn off the con

  • How to restore the Hibernate option

    original title: hibernation I accidentally deleted the Hibernate option when I drive clean up... how do I get it back?

  • Windows Live Photo will not use HP F380 for scanning

    I have a HP F380 all-in-One on an Acer Aspire running Windows 7 32 bit. I tried to get a scan if Windows Live Photo Gallery, but it allows me to choose which device (appears as Hp Deskjet F300), when I hit 'Import', the window of the unit closes and