For the PID variable time interval

Similar Questions

• A design of query for the conversion of time difference in days, hours, Minutes

  Hi all

  A design of query for the conversion of time difference of time in number of days remaining remaining hours minutes and rest in seconds. Made this one till now. Please suggest for all modifications, until now, it seems to work very well, kindly highlight for any anomaly.

  WITH DATA (startDAte, EndDate, Datediff) AS (SELECT to_date ('2015-10-01 10:00:59 ',' yyyy-mm-dd hh24:mi:ss'), to_date ('2015-20-01 03:00:49 ',' yyyy-mm-dd hh24:mi:ss'), to_date('2015-10-01 10:00','yyyy-dd-mm hh24:mi:ss')-to_date('2015-20-01 03:00','yyyy-dd-mm hh24:mi:ss') FROM dual)

  UNION ALL SELECT to_date ('2015-10-01 10:00:39 ',' yyyy-mm-dd hh24:mi:ss'), to_date ('2015-20-01 03:00:40 ',' yyyy-mm-dd hh24:mi:ss'), to_date('2015-10-01 10:00','yyyy-dd-mm hh24:mi:ss')-to_date('2015-20-01 03:00','yyyy-dd-mm hh24:mi:ss') FROM dual

  UNION ALL SELECT to_date ('2015-11-01 10:30:45 ',' yyyy-mm-dd hh24:mi:ss'), to_date ('2015-11-01 11:00:50 ',' yyyy-mm-dd hh24:mi:ss'), to_date('2015-11-01 10:30','yyyy-dd-mm hh24:mi:ss')-to_date ('2015-11-01 11:00 ',' yyyy-mm-dd hh24:mi:ss') FROM dual

  UNION ALL SELECT to_date ('2015-11-01 09:00:50 ',' yyyy-mm-dd hh24:mi:ss'), to_date ('2015-11-01 10:00:59 ',' yyyy-mm-dd hh24:mi:ss'), to_date('2015-11-01 09:00','yyyy-dd-mm hh24:mi:ss')-to_date ('2015-11-01 10:00 ',' yyyy-mm-dd hh24:mi:ss') FROM dual

  UNION ALL SELECT to_date ('2015-11-01 08:30:49 ',' yyyy-mm-dd hh24:mi:ss'), to_date ('2015-11-01 09:30:59 ',' yyyy-mm-dd hh24:mi:ss'), to_date('2015-11-01 08:30','yyyy-dd-mm hh24:mi:ss')-to_date('2015-11-01 09:30','yyyy-dd-mm hh24:mi:ss') FROM dual

  )

  Select

  trunc ((EndDate-StartDate)) days.

  trunc (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24) hours)

  trunc (to_number (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24-trunc (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24)) * 60) Minutes,))

  (to_number (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24-trunc (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24)) * 60 - trunc (to_number (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24-trunc (((enddate-startdate)-to_number (trunc ((enddate-startdate))) * 24)) * 60)) * 60 seconds))))

  data;

  Thanks for the answers in advance.

  AHA!

  TO_TIMESTAMP expects a string as input, so it first makes an implicit conversion from DATE to a string, in the format of NSL_DATE_FORMAT.

  To convert the TIMESTAMP DATE independently NLS_DATE_FORMAT, use

  CAST ( AS TIMESTAMP)

• A possible solution for the Date and time January 1, 1970 Bug?

  I fell for a scam currently floating around the Internet, this type of scam to change the date and time of an IPhone on January 1, 1970 made my IPhone stuck in a boot cycle. people use the term "brick" of the nature of bugs. I was curious if there is no fix?

  Put the phone in DFU mode:

  http://www.payetteforward.com/how-to-put-iPhone-DFU-mode/

  You will then need to reload all your data from your back upward.

• My windows mail takes forever to load. Started about 4 weeks ago. No problem except for the amount of time for loading

  I'm using Vista - Windows mail 6.0.6000

  What is a POP3 account? If so, see if the problem persists if you uncheck the send & receive Messages at startup.

  A few steps, you can try.

  • Delete the account, restart, and then add it again.
  • Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.
  

  • Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• VibrationController is not vibrating device for the period of time or indefinitely.

  Hello

  I develop native application of BB10, requiring a vibration of the device to warn the user.

  The amount of time (2 min or more) to vibrate that I provided is not honored by VibrationController. It always vibrates for a predefined time amount (less than 10 seconds) and stops.

  No matter how long, I specify in the start() method, it always vibrates for a predefined time quantity and stops.

  Here is the code I use:

  QML

  function vibrate() {}

  80, duration 2 min vibration intensity

  VIB. Start (80, 2 * 60 * 1000);

  }

  attachedObjects:]

  {VibrationController}

  ID: vib

  }

  ]

  {Of container

  layout: {DockLayout}

  Button {}

  text: 'alert user '.

  onClicked: {}

  VIBRATE();

  }

  verticalAlignment: VerticalAlignment.Bottom

  horizontalAlignment: P

  }

  }

  Request let me know what I'm missing here.

  Also can I specify indefinate amount of time like duration. so that the vibrations does not stop even I stop explicitly.

  Here is the configuration that I use:

  SDK: 10.1

  Feature Q10: with version 10.2

  IDE: Momentics version 2.0

  Thanks in advance.

  Looks like the maximum (for the C API) is 5000ms.

  https://developer.BlackBerry.com/native/reference/core/com.QNX.doc.bps.lib_ref/topic/vibration_reque...

  This limit makes feel me like there is a missing documentation of the Qt version.

  I will raise a bug.

• Script for the Passage of time?

  
  I wonder if someone could point me in the right direction. I make a banner ad that gets to a certain point and then there is a stop action and the user is invited to interact, when it does, the animation continues until the end. It's that everything works fine. BUT customer needs me to add a few scripts that indicates if the user is not interacting after 6 or 7 seconds, continue to the end despite everything. I'm an action script (2.0) novice and don't know how to proceed. Desperate to see tips. Thanks in advance!

  I can't thank you enough for the help, works perfectly!

• Script Automator for the DATE and TIME stamped record

  Hi all

  I'm not a scripter, but are in need of a DATE and time-STAMPED folder (or file) I would like to put on my desktop and have updated automatically so that I can use this tool to quickly see if a backup external (or internal) is current. probably I could also use it to quickly find out how /old/ a backup is.

  for now, I do this manually if I want to quickly verify that a backup works by creating a "date named folder" on the desktop - such as '-2016 03 26 "."» so I can quickly see if a backup I just ran ran.

  I have a lot of backups (internal, external, off site, etc.) and it would be super useful for me to have.

  I consider the name of the folder to be customizable (potentially) in case I need to change it, but a good default would be "-YEAR MONTH DAY" so that I could see easily when this backup has been but also I name my files in this way so they can appear in chronological order "."

  is anyone able to help me with something like that or suggest another forum for cross-post this?

  Thank you

  Jon

  Hello

  Create the the ""new folder " action, like this:"

  

  ---------------

  Drag and drop the 'Shell Script' variable in the "name:" field.

  

  --------------

  Double click on the variable in the "name:" field:

  Copy and paste this text in the field 'Script ':

  date "+%Y %m %d"
  

• Text for the username variable input area moves to the next screen when you click

  I assigned a username variable to a text entry area. If I mouse click inside the text box to enter a name, I am taken to the next screen. In other words, the entry text box seems to act like a button. Is there something I need to change in the Properties window to prevent this?

  Hi Eddie,.

  You have 2 possible actions: a by clicking on the button (success), a when you click outside the button (the rest of the slide) which is a failure. And you can attach an action at a time. The default action for both is 'Continue', which means that the head of reading which has been suspended by the button, will continue. You don't want that to happen if the user clicks on the button, but outside the key (like by clicking in the field ETB). This is the reason why recommended Manish allows you to change the action for failure to 'No action', which means that nothing will happen if the user clicks outside the button. He can then click in the text field and type its entry.

  Lilybiri

• How do the dynamic set for the PID control point

  Hi all

  Here, I have a question about regulation PID setpoint. Now, I've built a program in which the vi PID setpoint. may not be a constant. But I want to improve the program by allowing the set to be dynamic, saying the dynamics, I want to say maintaining the setpoint change over time, it could be like a sine wave, or better could be a custom shape. Could someone tell me how to fill that?

  Thank you

  CJ

  
  

• In the control loop time interval and simultaneous measurement

  Hello world

  I just started to learn labview so please do not judge my messy programming

  I want to constantly measure certain values (humidity, temperature, etc.) and once a certain threshold is crossed, I want to activate a device. Measure and activating things works perfectly if used separately. If I combine it and measure for awhile (10 samples at 100 Hz continuous playback mode) I get the error 200279 "attempted to read samples that are no longer available.

  If I use (100 samples to read 100 Hz n samples) it measures for some time (interrupted manually after 4 hours), but I recognized that there was a gap of time of half an hour between the timem system and the 'real' time shown in the table.

  Oh, and this isn't really critical time. It is enough if it measures one sample per 5 seconds or more.

  Is there a quick fix and dirty for this?

  Thank you for your very long in advance.

  Hendrik

  
  

• Cannot be used for the loop variable 'i' twice?

  Something weird is happening with a dialog box that I'm doing that dynamically creates buttons based on the number of objects in a table that I pass in a function. I say weird, but it's obviously me not understanding how the variables in a loop. See below:

  mrp = {
      one: [new File("/Users/constantincerdan/Creative%20Cloud%20Files/Templater/Iconbuttons/bagspouches.png"), "One"],
      two: [new File("file:///Users/constantincerdan/Creative%20Cloud%20Files/Templater/Iconbuttons/beauty.png"), "Two"],
      three: [new File("file:///Users/constantincerdan/Creative%20Cloud%20Files/Templater/Iconbuttons/bluepocketsquare.png"), "Three"]
  }
  
  function Dialog(dialogTitle, buttons) {
  
      var dlg = new Window("dialog", dialogTitle + " - OU");
      dlg.margins = [20, 15, 20, 17];
      dlg.buttonsGroup = dlg.add("group");
      dlg.buttonsGroup.orientation = "row";
      dlg.buttonsGroup.spacing = 15;
  
      for(var i = 0; i < buttons.length; i++){
          templaterButton = dlg.buttonsGroup.add("iconbutton", undefined, buttons[i][0])
          templaterButton.onClick = function(){
              open(buttons[i][0])      
              dlg.close()      
          }
          dlg.buttonsGroup.add("panel", [undefined, undefined, 0,120])
      }
      dlg.show()
  }
  Dialog("Test",[mrp.one, mrp.two, mrp.three])
  
  
  
  
  
  
  

  Execution of this poster dialog very well, and all the icon buttons have their own photos as they should (see photo below).

  This is what confuses me: line 16, he is able to use I on the buttons [i] [0] very well get every image and use it, but for some reason any when I also try to use the same thing to line 18 to try to open the real images for each button, I get the error "undefined is not an object" on this line. Change key [i] [0] to line 18 to the key [0] [0] opens the first image very well (on three keys), so I can't understand what I'm doing wrong here?

  

  The problem is that the function that executes the dialog box is not a variable that I exist. It is a function that get-called on the fly. One thing you can do is to use 'this' in the service running, so it will point to the iconbutton that you clicked on, unfortunately there is no default property of this button that can point to the actual file, there is only the property "icon" but that only gives the name of the file and not its full path , but you can create a custom property that can point to the path to the file like this:

  MRP = {}

  a: [new file ("/Users/constantincerdan/Creative%20Cloud % 20Files/Templater/Iconbuttons/bagspouches program. PNG"),"One"],

  two: [new file ("file:///Users/constantincerdan/Creative%20Cloud%20Files/Templater/Iconbuttons/beaut y.png"), "Two"],

  three: [new file ("file:///Users/constantincerdan/Creative%20Cloud%20Files/Templater/Iconbuttons/bluep ocketsquare.png"), "Three"]

  }

  function {Dialog (dialogTitle, buttons)

  var DLG = new window ("dialog", dialogTitle + "- OR");

  DLG. Margins = [20, 15, 20, 17];

  dlg.buttonsGroup = dlg.add ('group');

  dlg.buttonsGroup.orientation = "row";

  dlg.buttonsGroup.spacing = 15;

  for (var i = 0; i)< buttons.length;="">

  templaterButton = dlg.buttonsGroup.add ("iconbutton", undefined, buttons [i] [0]);

  templaterButton.myFile buttons [i] [0] ;// = my custom property

  templaterButton.onClick = function() {}

  App.Open (this.) MyFile);

  Open (this.) MyFile); / / use the property of the selected object

  DLG. Close();

  }

  dlg.buttonsGroup.add ('panel', [undefined, undefined, 0,120])

  }

  DLG. Show()

  }

  Dialog box ("Test" [mrp.one, mrp.two, mrp.three])

• CP7 - decimal points Show 4 (or more) for the user Variable?

  Is there a way to show the decimal points 4 or more for user variables?

  For some reason, I'm only show two decimal places for user variables in Captivate 7.

  Micky

  Fear, you need to use JS for that. How do you get the decimals?

• How to create the presentation for the columns variable and use it in the story?

  Hi all
  
  Someone knows how to create variable presentation for a column (that is, I need to create it in edit section formula itself). And then, I should use it in the Narrative section to display the value of this column. Is this possible? Or do I need to use any other variable for this requirement? If Yes please let me know, how to create it? This is a very urgent requirement.
  
  Thanks in advance
  Stephanie

  Hello
  You can have any number of columns in the narrative view, he will accept... Just mention the numbers of the columns in the view body narrative...

  check if useful/correct...

  Thank you
  prassu

• Why do I get the word is not responsible for the messages every time I try to open a word document

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you use the product key on your machie isn't only good for Vista - Office.  Chances are Office was installed as a free trial, and the trial has expired and to activate office (or get a real version of Office to replace the trial with) then you must buy the product and get a product key for Office to purchase.  If the trial has expired, this fact might explain all the problems you encounter - produced Office are more fully functional (only functional to the point of being able to turn them on).  If this is the case, you will need to decide whether to buy Office and which version to get the programs you want to use.  This decision is yours.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Crazy rendering for the color correction time

  I gave a quick clip h.264 with the color corrector.  The clip is only a minute long, but the rendering time is more than 15 minutes?   Is this normal.  Final cut this would make about a minute or 2.  The file is a h.264 from 1920 x 1080 to 23.976.

  Appreciate any idea that can be offered.

  Not normal. You will need to provide an amount exhausting details about your situation and specific configuration.

  After my experience - if you have an approved graphics card and are able to engage GPU in the mercury playback engine you should decimate FCP rendering times.