for windows vista system recovery
Runs ok recovery disks. But when he is at "complete installation" "install windows" part then I get a message "Windows Setup cannot configure Windows to run on a hardware on this computer. U had Vista SP1 and 2 installed before the recovery attempt. Ideas of Anny?
I went out and bought a new OS and it me operational. Too bad I had to lose all my files to do, but at least the computer is running again. Thanks for your help.
Tags: HP Desktops
Similar Questions
-
How can I get the program files deleted using CD for Windows XP system recovery?
I used a CD to restore the system to reboot my computer and didn't back up my files. Can I get back them? I tried to go to the system restore, but it will not go back to the point before I ran CD. Any suggestions? My computer is a Dell Dim4500.
Hello
I suggest you to refer to this link and check if it helps:
It will be useful.
-
0 x 80070643 for Windows Vista system
Setup error, I get all the way to the end of the wiz. then he throws the error. But I have the 32 bit, trying to change a security to the essential. Help please,
Make sure that the original anti-virus is completely uninstalled before trying to install MSE.
If you try to install Microsoft Security Essentials, repost of kindlly in the MSE Forum, the link below:
http://social.answers.Microsoft.com/forums/en-us/msestart/threads
Installing and upgrading Microsoft Security Essentials program.
See you soon.
Mick Murphy - Microsoft partner
-
Helps the Vista system recovery
Hello.
I have Vista on my desktop. Recently, a friend told me that I was able to connect my Xbox 360 to my pc via ethernet. I did, and of course, it did not work. I've disconnected and ended up with something like "the file calculated checksum does not match" or something like that. I havnt been able to access the windows since.I followed the instructions for the Vista system recovery. Downloaded 64-bit using the binding and the ISO burner. Basically, when it says "Press any key to boot from the CD/DVD drive" I do, but instead to load the screen of Windows recovery process, I usually get an error with this screen below "Windows cannot recognize the digital signature for this driver" once or twice he managed to get that load the files on the disc but then goes back to "press any key...". "and when I do I get 'checksum of the file...". "or whatever. I keep going in circles!
So, that being said... I don't know what to do. Help, please! Thank you!!!
If I understand you correctly, you have downloaded a startup repair disc, NOT a Systrem recovery disk to put it back to factory settings.
Here's how to do a startup repair disk:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to perform a recovery to factory settings.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their way of doing recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
-
I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager
Hello
Here are the different ways to reinstall vista
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a microsoft dvd vista
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
Save all data, because it will be lost, do the above
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?
original title: reinstall Windows VistaI was getting a new hard drive to my HP laptop. Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?
Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.
-
80070020: updates for Windows vista for x 64-based system
When installing KB973917 updates for Windows vista x 64 based system I get the error code 80070020
0 x 80070020
STIERR_SHARING_VIOLATION the process cannot access the file because it is being used by another process
You receive a "0 x 80070020 the process cannot access the file because it is being used by another process" error message when you try to download an update from Windows Update or Microsoft Update
http://support.microsoft.com/default.aspx?scid=kb; EN-US; 883825>
see if that helps.
-
I'm unable to install the update for Windows Vista for x 64-based systems (KB972145). Whenever I try, I get the error code 80070570.
0 X 80070570 - ERROR_FILE_CORRUPT
The file or directory is corrupted and unreadable.Perhaps it is the update itself that is corrupted, try to manually download and install the same:
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=enIf this does not work maybe reset - WU
http://support.Microsoft.com/kb/971058/en-us
How to reset the Windows Update components?Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
He tried to install since 10 December and fails every time with this error.
someone at - it suggestions?
Hello
How to fix Windows Vista error 800b0100 update
http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/Error Code 800b0100 in Windows Update
http://www.instantvista.com/800B0100.htmlError message when you try to use Microsoft Update or Windows Update Web sites to install
updates: "0x800B0100.
http://support.Microsoft.com/kb/956702
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Duplication did not begin until I tried to load the list of updates. Continues to tell me the same updates are available and download them if allowed. Only the update that has been update group above that does not DOWNLOAD is Internet Explorer 8 for Windows Vista, which I am downloading now. When I go to 'historic day' to remove duplicates as indicated in the instructions for help. duplicates above are not listed. Of the; folding situation is on a Gateway laptop. I am writing this issue on my Gateway PC.
LiveUpdate install updates for your Symantec/Norton application only.
Don't worry what you see in the installed updates or unable to uninstall the 3 updates, simply 'hide' and move.
1. stop the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click stop
(Stopping the service will take a moment)2 remove the contents of the download folder:
Start > Right click on run , and then select run as administrator >
(type or copy/paste) %windir%\SoftwareDistribution > [OK]
Open the download folder and delete its content
Close the window.3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update | View the updates available (or Select the updates installed): right-click on KB976325 KB973917 and KB974318, in turn. Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.
4. start the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click Start
(Stopping the service will take a moment)=====================================
To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I have the same error Code 09370001 which appears whenever my PC is trying to install the update: System Readiness Tool for Windows Vista KB947821... I have 7 failures of my PC, try to install this update.
My system is:
Windows Vista Premium Hm
Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
3.00 GB RAM
Mobile Intel (r) 965 Express Chipset FamilyCan someone guide me how I can get this update to install?
Thank you so much in advance.
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.
I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.
How can I fix the corrupted windows components store?
Thank you
Dan
CMDC,
If the SFC was not able to repair files then the best thing to do is to reinstall Windows. You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool. If there is still a problem with the SFC nto be able to complete then you should do a reinstall.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
How can I fix error 8007371c code for "Cumulative Security Update for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2936068).
Melvin,
Please contact the Microsoft Community.
I only see the answer from here-
Let us know if you have problems with Windows in the future.
-
Update for Windows Vista security for systems x 64 (KB2705219) does not maintain install
This update security update for Windows Vista for systems x 64 (KB2705219) does not maintain install. He also continues to try to move automatically.
Other updates are installed without problems if Im not sure what I can do about it.
Help!
Windows Update error 80070490
http://Windows.Microsoft.com/en-GB/Windows/Windows-Update-error-80070490#1TC=Windows-Vista
-
Error message below Re: I got the cumulative update for IE 9-64 - bit to fail repeatedly. The error code is listed below.How much of a problem is the following and, if serious, how can I get the system to install this update? I'm running Vista 64 bit and it is patched to date - with the exception of this one.
Update cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2761465) installation failed
Error details: Code C 8007371Help and Support: http://support.microsoft.comHello
Thank you for reaching out to the Microsoft Community.
According to the description, it seems that you have found a 8007371 C error code while trying to install update Cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2761465).
I understand the inconvenience you encountered. I will certainly help you with this issue.
I suggest you to refer to the advice given by Karena R on June 10, 2010 and check if it helps.
Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
For more information, visit the following link and check.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.
Maybe you are looking for
-
Move the tab bar to below the address bar?
Hello I just upgraded to FF4, and now the tab bar is just up the top of FF. In my previous version (3.6.something), it was above the web page area, below the address bar. I can move it to the bottom? I find this disconcerting whether if far away page
-
Product number: QN650AA #ABC Serial number: [Moderator published serial number] Model number: s5-1020 I lost my bios password and have no way of entering them on startup, im 17 and im trying to change some settings for my info that more slender integ
-
Cannot change left/right mouse buttons.
There is no tab in the properties of the mouse buttons. Some time in all of the recent "improvements" that gave me a center mouse & keyboard, the button tab disappeared from the properties of the mouse. I have reviewed each tab, and there is no optio
-
Enumerator programmable root PROBLEMS!
Hi guy s :) I get this stupid of enumerator problem root... can anyone help pls?... that's what he repeats to me: http://prntscr.com/5hf239 and that's what he's saying is when I try to fix it: http://prntscr.com/5hf2i9 In addition, what say the roo
-
Adobe sign DC Pro works not on the button install, can not sign and save
I installed Adobe Acrobat DC Pro but have a question by clicking the sign in button to register the product. I put in my email and password, but when I click on the button, nothing happens? What could cause this problem and how to fix it? Any help w