For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

Hello

1. this problem occurs only with this particular update?

2 did you change on your computer before this problem?

You can follow the suggestions and check out them.

Method 1

You can reset the Windows Update components.

How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

How to back up and restore the registry in Windows XP

http://support.Microsoft.com/kb/322756

Method 2

You can read the article.

You cannot install some programs or updates

http://support.Microsoft.com/kb/822798

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

How to back up and restore the registry in Windows XP

http://support.Microsoft.com/kb/322756

Method 3

Step 1:

Place the computer in a clean boot state.

How to configure Windows XP to start in a "clean boot" State

http://support.Microsoft.com/kb/310353

Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

a. click Startand then click run.

b. type msconfigand click OK.
The System Configuration utility dialog box appears.

c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

When you are prompted, click restart to restart the computer.


Step 2:

Download and install the update from the link.

Update security for Windows XP (KB2719985)

http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

See also:

Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

http://support.Microsoft.com/kb/906602

Tags: Windows

Similar Questions

  • For Windows Vista, Service Pack 1 will not completely install.

    On Windows Vista Home Premium, 32 - bit system, trying to update Explorer 7, that no longer works, to Explorer 9, which requires SP1 (KB936330) and SP2 as required components.  I use Windows Update method, Guard sent me with Service Pack 1 (KB936330) to update.  However, I do, and then he said it will take about an hour and do not use my computer.  I do this but in a few minutes 'complete' and said "completed successfully."  I have now more than a finished SP1 (KB936330) entry on my page in the history of the update, BUT does not appear under installed updates, so it seems that's not install completely.  Why?  How should I fill this out so I can go on installing SP2, then Explorer 9?

    Learn how to install Windows Vista Service Pack 1 (SP1)
    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

    Learn how to install Windows Vista Service Pack 2 (SP2)
    http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  • For Windows XP (KB2686509) security update will not install

    I've got 5 responses within 24 hours with the same question - after download from Microsoft Update for Windows XP (KB2686509) security update will not install - be what I need to do? Microsoft will pay attention and come up with a solution?  Anyone know how to reach and motivate the MS to help?

    See:

  • For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. Operating system MS Windows Vista Home Basic 32-bit SP2

    For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.

    Help, please

    Thank you

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

    My operating system does not recognize that for Windows XP (KB2813170) security update is already installed

    Just out of curiosity, why all these steps? Why not simply do step 9?

    1. #9 step alone can not have solved the behaviour & we wanted to be certain that no "leftovers" Norton formed the scr3wing things.

    2. I wanted to do some (possible) that your computer is not infected.

    Welcome & thank you for your comments. Mark one or more of my posts as RESPONSE will officially close your thread.

  • There is an update of security which will not be installed. It comes back with an error Code 66A. Any ideas?

    There is an update of security which will not be installed. It comes back with an error Code 66A. Any ideas?

    Hello

    wrong forum

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

    or please repost your question in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • updated for windows 7 Pro for windows - 10 now lightroom 6 is not open, but the fact Photoshop cs6

    updated for windows 7 Pro for windows - 10 now lightroom 6 is not open, but the fact Photoshop cs6

    Hello

    You can uninstall the application and reinstall it from here: Download Photoshop Lightroom

    Kind regards

    Bani

  • Essentials Security 3 will not be installed. After attempting to install he asks me to insert a disk.

    Essentials Security 3 will not be installed. After attempting to install he asks me to insert a disk. which drive?

    Essentials Security 3 will not be installed. After attempting to install he asks me to insert a disk. which drive?

    Checklist: http://experts.windows.com/w/experts_wiki/89.aspx

    and

    See also:
    http://windows.microsoft.com/en-AU/windows/i-cant-install-microsoft-security-essentials - notes
    Step 6 if it does not work.

    Security Essentials Version: 2.1.1116.0
    Where so you Security Essentials 3 of?

  • CS6 bought and downloaded for Windows, but now have a Mac. I have the disk to download on Mac, but do not have a CD drive in my computer. How to download through my Adobe CS6 on my Mac account. It is not listed under my orders on my account

    CS6 bought and downloaded for Windows, but now have a Mac. I have the disc to download on Mac, but do not have a CD drive in my computer. How to download through my Adobe CS6 on my Mac account? It is not listed under my orders to my account, so I can't do it this way.

    Hello

    You can access the link as follows and download the installer for CS6 products and activate the product using the license key of series.

    Download Creative Suite 6 applications

    Thank you.

  • A problem on your computer is preventing updates to be downloaded or installed

    Hello

    I have Windows XP Edition Family Service Pack 1.

    I'm trying to use Microsoft Update to update to Windows XP Service Pack 2, however, I get the following error:
    "A problem on your computer is preventing updates to be downloaded or installed.

    Any help would be appreciated.

    Thank you.
    Pritesh.

    WinXP SP3, not to mention SP2 should be installed years ago!

    If you're still under WinXP SP1, you cannot have a functional installed anti-virus application so follow these steps:

    Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

    Help: I got hacked. Now what should I do?
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

    5 steps to help protect your new computer before going online
         http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

    Other useful references include:

    HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

    HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the deletion appropriate before installing any Windows Service Packs or IE updates and before installing your new anti-virus application (which will require WinXP SP3).

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Update for Windows XP (KB2419632) security failed. How to install this?

    I am using Windows XP Pro and the security update will not work.  I use Free2011 AVG as my anti-virus and spyware SuperAnti is downloaded with Lavasoft AdAware SE Personal.  Can you tell me how to get this download to install

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows 7 Ultimate (x 64) will not be installed in AHCI mode

    System:
    ASUS Maximus Formula 1403 BIOS configured in AHCI SATA II
    Intel E8500 to 3.24 G
    4 GB Corsair Dominator at 1142MZ
    2 * 300G WD VelociRaptor (BFVS) in AHCI
    LG H20L Blu - Ray writer
    Map its strong auzentech 7.1 PCIe
    Sapphire 5870 PCIe graphics card
    Samsung Syncmaster 275 t
    PSU PC Power & Cooling 860W
    PC power & cooling UPS 1500
    Intel (r) Matrix Storage Manager Driver Version 8.9.0.1023 WHQL, Intel inf Installation Utility v.9.1.1.1019 WHQL
    Windows 7 Ultimate (x 64)
    always clean install partition wiped with zeros and partitioned and aligned using Terabyte ready for formatting

    No matter what I do, or what Intel drivers version I am using Windows 7 Ultimate (x 64) will not load iaStor.sys (or it is native msahci also).  The only way I can get windows 7 to install is to configure the BIOS for Enhanced IDE; what I am able to install msahci after Intel AHCI drivers through a reg hack and a few reboots
    The installer written in that drivers are not compatible; to contact the vendor for a newer version - I use are compatable last, Intel for Windows 7 RTW. I have no problem whatsoever with Windows XP (x 64)
    He simply refuses to recognize AHCI mode during a new installation!
    BIOS is the latest version and updates module IMSM.
    .. .anyone have any ideas?
    Thank you

    same problem here.

    GIGABYTE MA785GPM-UD2H, who doesn't have a problem with Windows 7 Professional x 86 in AHCI mode and no need to device driver. with x 64 Ultimate, AHCI or RAID will not accept/load the driver.

  • For Windows XP (KB2478971) security update will not be installed - error code: 0xD0000135

    Hi, I use Windows XP Home Edition.

    I had difficulties to install security updates 11.

    An update of the sample is displayed above. All others are updated for security and all have the same error code.

    I clicked on the question mark next to the Red Cross, which shows that the update failed.

    The "Installation location" dialog box appears.

    I click on the link 'Assisted Microsoft Support Online'

    This brings you to: a page titled "Microsoft Windows Update problems trouble."

    NEXT (!)

    A dialog box appears informing me that

    additional software (.NET framework 2.0 or later) is required to run this troubleshooting.

    He tells me to fill in 2 steps:

    1. install the softwar very from the Microsoft Download Center. (FACT)

    "2. next, visit http://www.microsoft.com/fixit to restart the troubleshooter.

    I did the above, but THE convenience STORE NEVER RESTARTS!

    Can anyone help?

    Hello

    -Did you change on your computer before the show?

    I suggest you to follow the steps in these articles and check if it helps.
    You cannot install some programs or updates
    http://support.Microsoft.com/kb/943144

  • Windows Firewall and Security Center will not start, error 1068 and 1079

    I can't start my firewall Windows, error: 1079... or Security Center, error: 1068. Can help you with this question? When I try to access the Dependencies tab I get this error: Win 32: the specefied for this service is different from the specefied to account for other services running in the same process.

    I checked to see if dependencies were the same account before I got the message of 'Win 32' and WMI Service runs in the same account (Local Service) as firewall and Security Center, but the RPC Service is running on the Network Service account and cannot be changed via the services console, because the account fields are gray and cannot be viewed or modified. I try to avoid using the tool 'SubInACL' because I don't want to reset the whole registry.

    Help, please!

    The other post:

    I had a problem with obtaining the Windows Firewall and Security Center to start. Service account permissions have been changed at some point, including the depedencies. I get the error 1079 on the Windows Firewall and 1068 on the Security Center. Both are defined on the Local Service, but dependence, the CPP is set to Network Service and cannot be changed because the user fields are gray. I try to avoid using the SubInACL.exe because I don't want to reset the whole registry. Can you help me please?

    No, I'm not on a domain. I connect via a open wireless "hotspot". My main problem is; I don't have a Firewall or Security Center. Nor will begin. I get the error: 1068, to Security Center and an error: 1079 on Windows Firewall. When I try to access the dependencies on either I get this window:

    WIN 32: The account specified for this service is different from the account specified for other services running in the same process.

    A month ago I made the mistake of trying to brand of ACDSee of security, "ACDOne" which includes software "BitDefender". That's when I lost my firewall and Security Center. BIG MISTAKE! I uninstalled and deleted all the files that I found that have been left.

    My Security Essentials and Windows Defender work very well. I'm stuck and need help with this please! Please, I beg you! Someone... Help!

    The system cannot find the specified file.

    http://support.Microsoft.com/kb/947821>

    After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the updates.

    UTC/GMT is 02:51 Wednesday, April 25, 2012

  • Erroe code: 0x8007F007 for Windows XP (KB941569) security update.

    Original title:

    install failure: windows media runtime 9.5 & 11 windows xp security undate

    install failure: format KB941569 windows media runtime 9.5 & 11 windows xp security update.

    the bad code # is: 0x8007F007

    system: windows xp / x 86, 2002 professional, service pack 3

    PC: processor intel pentium 1.5 GHz, 598 MHz, 504 MB of RAM

    Hello
     
     
    Thanks for posting in Microsoft Community!
    I understand that you are facing problems with Windows updates.
     
     
    Let's see the following steps in the article and sugg_r_es and check:
    You cannot install some programs or updates
     
     
    Note:
    Ignore "method 7: upgrade on site" link above.
     
     
    Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
    How to back up and restore the registry in Windows XP

    http://support.Microsoft.com/kb/322756/

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
     
    Thanks for posting the result and let us know if you need assistance on Windows.

Maybe you are looking for