Force indicator update

Similar Questions

• How to confirm or force the update of the bios

  I made an update of the bios on my system of 4058-CTO W500, but he is stopped at half way through the ' writing block x of y "Countdown.  Is only the approximately 35 65 and suddenly closed bios window and start the system closing.  He took a /long/ time (about 10 minutes) to complete the shutdown of Windows, but finally made it.

  The system seems to be ok - it restarted, got to the bios screen a couple of times and restarted each time back, then started upward in Windows.  Is this a normal behavior?  Is there a method to check that the bios everything is indeed correct or perhaps force the update again?

  I have the files .iso and .exe for the update of the bios, but when I run the .exe, I get a message that the bios is updated to alread - done this review done watching the whole bios to see if it is correct, or is it just the version number...  I have not tried running the update .iso - type of hope for some feedback before I do.

  In any case – all entries and thoughts are welcome.

  I agree with Moskito.

  If this can help you to sleep better at night, back-in the previous version... and then to the high-flash BIOS flash it again.  But I highly recommend you do so through the ISO version... take the OS completely out of the equation.

  Concerning

• Indicator update Smartphones blackBerry won't go away.

  Hi all

  I've updated 'Quick pull lite' app world yesterday and that went well, but the indicator update does not go far. So I decided to just update my other application requiring an update which has been 'Where' and this update has failed. So I just did a battery pull which did not help. So I uninstalled App world and the indicator went far obviosly. I reinstalled App world and the indicator is back, but now there is no apps to update in 'My World'. Any idea on how to get rid of it? Any help would be appreciated.

  Thank you

  Mike

  Carrier - T-Mobile

  BB - 8900

  OS - 4.6.1.231

  App world - 1.1.0.15

  Personal BIS

  Hello

  Home screen > messages application > menu > search

  criteria of:
  all unread messages, of all types, in all folders.

• force an update of the topology

  Hello people,

  I was wondering if there is a way to force an update of the topology without restarting the FMS.

  I encountered this problem a few times now, on different hosts FMS, here's the scenario:

  A new script agent is built and pushed out creates a new type of topology. Everything seems OK until you try to create a new rule for this. The type of topology is not available for the scope of the rule.

  If anyone else has experienced this? I brought this to support previously and we restarted just the FMS to work around the problem. Is there some other way around him? Of course, we want to keep the downtime to a minimum, especially with production systems...

  Support the groovy code to achieve what I thought I would share with the community...

  This forces an update on a specified type so that the topology Service updates the cached information.

  In this case, we were unable to field of application of the rule properly at a table of script agent, received unknown root of the error.

  If the table is missing in the drop-down list, I would first try to disable and re-enable the corresponding cartridge. Manually by typing in the scope sometimes also works.

  Use: To run the Script Console. UpdateType true & TypeName and subject of topology - for agents of script, it should be: agentName_Agent_Table_tableName

  typeName can be found or checked in: Configuration-> \Tables\ Data\Mgmt Server\All Agents\ [Nom_agent] [tableName], click property Viewer, value "name of Type of topology.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  def typeName = "agentName_Agent_Table_tableName";

  UpdateType Boolean = false;

  def topSvc is server. TopologyService;

  release of def = new StringBuilder();

  output< "checking="" type="" "="">< typename=""><>

  def type;

  try {}

  type = topSvc.getType (typeName);

  output< "found="" type:="" "="">< type=""><>

  }

  catch (Exception e) {}

  output< "failed="" to="" find="" type:="" "="">< e=""><>

  Return output.toString ();

  }

  def descendentTypes = null;

  try {}

  descendentTypes = topSvc.getDescendentTypes (type);

  output< "found="" descendent="">

  }

  catch (Exception e) {}

  output< "failed="" to="" find="" descendent="" types:="" "="">< e=""><>

  }

  If (! descendentTypes & UpdateType) {}

  output< "updating="" the="">

  type = topSvc.beginUpdate (type);

  type = topSvc.endUpdate (type);

  output< "type="" updated="">

  try {}

  descendentTypes = topSvc.getDescendentTypes (type);

  output< "found="" descendent="">

  }

  catch (Exception e) {}

  output< "descendent="" type="" information="" still="" not="" available:="" "="">< e=""><>

  }

  }

  Return output.toString ();

• The Installation of VMWare tools failed. In any case to force the update/install VMWare tools?

  I used to use VMware Workstation 10 and recently upgraded to VMware workstation 11.  However, whenever I try to install a newer version of VMware tools, it will fail with message saying something like "VMware Tools can be installed in the Virtual Machine.

  Yes, I am trying to install VMware Tools within the guest operating system, but I get this notification for all my virtual machines, I'm running.

  I'm under 6 Virtual Machines simultaneously and they run on Windows 7 32 bit OS and configured with 4 GB of RAM, 1CPU, 100GB HD + 5 GB second HD for the swap file, NO printer, no sound card.

  For each virtual machine, I changed about 50 + key of Windows registry and detect the values to hide from all the programs that they are running on the virtual machine.

  I assume due to records, I changed, it confuses VM installer who it is not running on a Virtual Machine.  Then I tried to change all these registers changed to send it back to the original value, yet I is always the same message.

  I must be missing either some registry values or values that I restored is false. But I don't know which is the case.

  I can simply delete all my Virtual Machines and start again with the new virtual machine, but I don't want to repeat this process whenever a newer version of the VM tools out. and installation of windows and search and replace registry values for each virtual computer is full of works.

  So, here is my question.  Anyone know how to force the update / install VM tools in my virtual machine?

  P.S. I added under scripts in the file .vmx for each of the virtual machines.  I don't think it would cause the problem but just in case I include it.

  SVGA.vramsize = 268435456

  monitor_control.restrict_backdoor = "" true ".

  insulation. Tools.getptrlocation.Disable = 'true '.

  insulation. Tools.setptrlocation.Disable = 'true '.

  insulation. Tools.setVersion.Disable = 'true '.

  insulation. Tools.GetVersion.Disable = 'true '.

  monitor_control.disable_directexec = 'true '.

  SMBIOS.reflecthost = 'true '.

  memtrimrate = '0 '.

  mainmem.usenamedfile = "false".

  sched.mem.pshare.Enable = "false".

  prefvmx.userecommendedlockedmemsize = 'true '.

  Tent Installer to get the version information of the hypervisor of underling to see if it is a VM or not.  This is done by contacting by back door.

  Setting monitor_control.restrict_backdoor = "true"prevents communication."

• Forcing an update of my textfield

  Currently I have a loop that goes through and draw a very long list of objects.  Each object is contained within its own sprite and because it attracts the I wanted to have a text box saying 'Objects' + nObjectsTotalLoaded + ' ' + nObjectsTotal + 'have been loaded.  At the moment I am time because my curls takes so long, but I thought that if I have a text box update that creates each object that it will also fix my problem with timeout.  I would like to know what you think. I can provide more of my code if necessary.

  It is known until force and update inside a loop for or a while loop.  Flash is not interrupt their.  Maybe you can break you loop into multiple loops.

  You can also not draw all the objects at once.  I suggest that you use a timer or an addEventListener (Event.ENTER_FRAME,...). To divide an object how you draw only once.

  But according to the number of objects you have you can reduce the number or manipulate another way to increase drawing performance.

• force the update during processor intensive routine

  Hi all
  I have a SWF with several CPU intensive subroutines in a main init() routine at the beginning upward (about a 5 seconds wait).  He needs a preloader not due to active loads but processor intensive routines.
  
  I am trying to create a preloader that will display the progress as complete routines, but when I try to write text field each subroutine fills the textField.text is not updated or the display of the text field is not updated after each completed subroutine.  This prevent me to follow the progress of the opening at the top.
  
  is it possible to force an update to the display list in the middle of an intensive routine of the processor?  I think that flash is supposed to be updated after each image, but I don't see it.
  
  In addition, the text field I am display * before * this CPU intensive routine * fact * display when you run locally but * not * display before the routine executing online.  do not know why.
  
  THX in advance,
  Michael

  The usual method is to use a timer or a setInterval. So if you know that you must create 1 000 vector shapes and you know that it takes 10 seconds to do all the. So, instead of trying to do them all in a single function, you must set a timer that called a function every bit - something like 50 milliseconds or more.

  Then you would make a list of the forms you need to create, start a timer that called a function every 50 milliseconds, each time that the timer calls the function making it (just to be on the safe side) 4 vectors, their traverse the list of those who must be created, then the function would be, the framework would make, any preloader could make and so on. It repeats until the list of vectors that must be created was empty.

  You would most likely want a custom class that has managed it and dispatched a sort of progress and complete events.

  However, I'm not sure why you are taking this approach. You can create all the clips within the IDE Flash and then export for actionscript. Then it's just a mater of their load and preload for this is generally simpler than what you do.

  There are probably also some tips to make things seem to be created and load faster.

• Forced iOS updates. Please, give us 24 hours notice, at least!

  I don't know if everyone Apple actually monitors these communities, but just in case they do...

  It would be wonderful if you guys would allow delayed updates iOS forced at least 24 hours.
  
  This would allow those of us on the portable very limited, expensive, base data plans for access to a public library or another free WiFi access point.
  Rather than having our allocation of scarce data completely trashed for the month.

  It's certainly not too much to ask?

  Moreover, the community as a whole...
  Is there anyway to know when Apple is about to apply an update, at least one day in advance?
  If you want to know this, we could at least turn the power off until we get to another WiFi access point.

  Thank you in advance.

  The vast majority of us on this forum are all end users like you

  Please send your comments, if you like, at http://www.apple.com/feedback

• Who can force an update of the firmware?

  Hi friends,

  Picked up a xprt replacement at the Sprint Store today (see my thread on LED solid), red and the firmware is 4.1.110. When I go to update the firmware of Motorola, camera says his day (he is obviously not). Sprint send this to my camera, can Motorola? I just have to keep trying? Any help would be appreciated.

  This update is pushed by Motorola, not Sprint.

  Attempt to dial #35468 # from the Dialer. This will force your phone connects to the servers of Motorola, who should see that your phone is not up-to-date and it will push your phone.

  Thank you

  J

• Force the update of the app

  So I tend to become dazed Quill update. And often I'll light my TPT and I hope that it updates automatically (it's on) but it does on his own time. I'm sitting here with 7.0, wait until he realizes that a 7.1 is available. It happened with 6.0-7.0 > too. How can I force the tablet/Android fool to check / download updates?

  Once a day, I visit the market and search for updates. I suspect that there is a delay in a download of update on the market and the notification to users.

• How can I force image update sequences?

  I use first composite various sequences of images in one program 3D, Blender.  Several times I export a preliminary version of Blender, import the sequence to first place in the time line, so I find I want to make some changes in a blender and make a new made some executives.  Images that I have made a new, first update only some of them.

  I did a test where I got a new made a section with a different background color to the scene.  In the first three first executives set to date, then the fourth was the old image, 5th and 6th are new, 7th was old, 8th and 9th were new, and so forth.  He did for any updated image sequence, using a combination of old and new frameworks.

  I did the above test three times.  The first time I saw mixed frames, the second time that all imported fine, the third time I got the mixed frames again.

  If I restart the first, then it goes through the screen 'media pending' for all my media and then shows the correct update management, but it would be embarrassing to have to restart the creation each time I want to see my new frameworks.

  I use first Pro CS5.0.3, on a 2.66 Ghz Quad-Core Mac Pro with 8 GB of RAM.  The files are located on an eSATA RAID 5 array.

  Is there a way I can force the first to update the frames in image sequences?

  Does anyone else have these problems?  What do you do when dealing with many sequences of images that you frequently update?

  Thanks for any help.

  Is there a way I can force the first to update the frames in image sequences?

  Three choices.
  1. do not leave the first opened during rendering in another
  request (it's what I do).
  Overwritten files will update when you first.

  2. right click your picture in the project window sequence,
  Select "make Offline... > Media files remain on the disk > OK.»
  Then, right-click in your sequence of image in the project window,
  Select "Media link...".

  3. close and reopen your project without leaving the first.
  File > close (Ctrl > W), then re - open the same project.

• [CS3 JS] How to force the update of XMP metadata for a thumbnail?

  Hi people,

  In a JavaScript in Bridge CS3, I update a value in the XMP metadata for a thumbnail. Later in the script I want to read the updated metadata XMP of miniature, but often the bridge didn't updated metadata at the time wherever I read it. In other words, my script reads the value before the update. I guess there is a problem of ongoing caching.

  I'm new to the bridge of script, and I hope someone here can offer suggestions on how I can (or even * if * I can) force the bridge to update the cache of the XMP metadata to a file so that when I read it later in the script reflect the recent changes. I tried to use Thumbnail.refresh (), but this does not seem to do the trick. I don't mind a slow script, I just want to be able to read the correct value.

  Thanks in advance for any help!

  -Jim

  Where is the line?

  Thumb.Metadata = new Metadata (updatedPacket);

  Try

  app.synchronousMode = true;

  Thumb.Metadata = new Metadata (updatedPacket);

  approx. synchronousMode = false;

  Metadata default bridge updates arrive in the background and not on the main thread, but using the mode synchronous here your script only continues to the next line, until the operation is complete.

  -David

• Forced ignoring update changed variables FM

  Environment: Tech Comm Suite, fully patched (FM 8, 7 HR)
  Location: HR project based on a book by FM added by reference.
  What's happening: in this project, the variables change value only. (there is no new that is added and no deleted, but their values change.) During a forced update, HR does not update the values of the variables FM.
  Comment: The project attributes are stored in the apj files and style sheets. What are (rightly) left intact during an update. Variables stored in rhvariable.apj should be updated, perhaps eventually.
  Solution: Create several versions of rhvariable.apj and copy one hand in the project directory.
  
  Does anyone know a better way?
  

  As a result of the foregoing: rename file PDC (and so generate a new) made no difference.

  Adding a new variable before the update doesn't make any difference.

  Remove BOTH the PDC and the rhvariable.apj solved the problem file.

  Conclusions:
  1. the load/update product first of all of the *.apj (and other system files).
  2. It then caches in the file of the CPD, presumably for performance reasons.
  3. I've noticed that (as the new I defined above), the variables that are not actually referenced in the project documents, not get pulled.
  4. to change from something strength *.apj, you use the process described above.
  5. the above does not have OCD, layout index. HR rebuilt the FM, and all customizations must be restored by hand. If there is no structural changes in the project, you can get away with replacing *.hhc files and backups *.hhk.

• Force the Update April 24

  My preferences automatic update is disabled. The update of April 24 outrepasseront these preferences? I don't want to update version 3.6.28 due a medical software that I use.

  If you have not ticked off auto update, you won't be updated for Firefox 11. However, as Daniel said, there are no updates for Firefox 3.6, period. He will be vulnerable to security breaches in the future, and stability problems.

  Is there a reason you want to update Firefox 11 maybe I can help you? There are many reasons to update, improve performance, support for the new standards of the web, better use of memory, hardware acceleration, etc.. And with the new Versions, most of the modules are by default in Firefox 11-compatible.

• everyone is tired of forced IOS updates?

  Then... I had an air Pad 2 & an I phone 6...

  Of course unlike most here I want to upgrade my 2 products apple.

  And! I can't push this pop-up twice a day... APPLE NEEDS TO STOP HARASSING ME!

  And no, this isn't for a Jailbreak, but for this simple reason: I like my latest product then a few years before slowing down to a stop of the turtle!

  Believe it or not, I have an Iphone 3 g, and 4 hanging in a drawer somewhere.

  Never updated, no Jailbreak and they are (almost) always as fast as day 1!

  You forgot to mention that these patches updates of security vulnerabilities, but also bug fixes.