Force the worker compilation to work faster

The process of creating the FPGA bit files takes a long time even with a simple FPGA design.  I followed the system resources, when the worker compile creates the file bit. Only a few percentage of the CPU is being used. Is there a way to force works Woker compile faster because there are available system resources?

My system is dual Xeon 6 physical cores with 16 GB of RAM, running the version of LabVIEW 2011 90 days come with the single-board Rio evaluation.

FPGA code compilation is performed not by the compiler to the LabVIEW but a compiler of Xilinx, specific to their FPGA chips.

The problem you see is the compiler of Xilinx is a single thread and so will not use the base and can also sometimes be seen ' hanging out '. There is nothing you can do to push the compiler to redouble our efforts by encouraging the use of other resources. If you carrots be 3.2 GHz each, then compile on your dual Xeon 6 will be no faster than on a single 3.2 GHz processor.

What you need to reduce your compile time is the fastest core, you can get!

Tags: NI Software

Similar Questions

  • How to force the shared folders to work?

    I have Windows 10 host and guest OS Windows 7. I have Visual Studio is installed on Windows 7 comments, and I'm trying to compile code that is located in the shared folders that I go up as network drive.

    When I try to do this with Visual Studio 2013, library file contains all zeros (binary, I see it in hex editor). It's a bug of folder for sure, because otherwise (no folders) compilations is OK.

    Is it possible to fix this bug and force the shared folders to do what they promised, i. e. to share files between the host and the guest operating system and do not write all zeros in the output file?


    Not really, these types of problems hit the option files shared for many years.

    Workshares of files for simple file sharing, but if you want to use as the project file in Visual Studio, then what you see is not really surprising.

    Yes you can troubleshoot it and spent a lot of time trying to make it work. Which may or may not work.

    However, the General recommendation is to use industry standard file sharing shares - for example native Windows - instead of construction option of share if you want to use for this type of scenario.

    A common alternative is to develop locally within the virtual machine and share it with other computers using source control systems.



  • Choose the worker of compilation

    I installed a worker to compile on a linux PC remotely as described here.

    Worker compiling on the remote PC can connect to the compile on PC (widows running) local development server.

    Now, when I make a compilation of the local compilation worker is selected by default.

    How can I select the one remote?

    My setup is as follows

    Development PC: Windows 7, LabVIEW 2010, Xilinx 11.3

    Remote PC: Linux (Ubuntu10.10, I know it is not supported by OR), 2012 LabVIEW compiles worker, Xilinx 13.4

    Is there a compatibility issue between LabVIEW 2010 and 2012 of LabVIEW? Or between the Xilinx software?

    Thank you

    LabVIEW 2010 provides only compile for use with Xilinx 10 and 11 toolchains. Therefore, when you make a compilation, the compile server will search for these tools. Since you have only the xilinx tools installed 13.4 remotely, LabVIEW 2010 will not choose this ability to perform compilations.

    You must update your LabVIEW 2012 host PC to take advantage of its remote workers compiles with the features of LabVIEW 2012.

  • Need to force the Flash Player installer to work even if it is out of date.

    There are a lot of PC in our network of the firm has to Flash Player version 11.1, on which is installed. We tried to get version 18 for all these PC, when Adobe released another update and all of a sudden that we used to push the update installation program will no longer work. We must be able to choose a single installer and work with it until all users in our system are up-to-date - regardless of whether or not Adobe releases yet another player update in the meantime. Is it possible to force the installer to work even if it is not the ABSOLUTE latest version? Otherwise, our users will not be just a version behind - they will continue to keep DOZENS of versions behind. I know that Adobe wants to force us to use the latest version of player safety, but in such a case the result is actually less of security.

    Any suggestions? Thanks for listening.


    Hi brandonLancaster,

    Rate of normal release of the flash player is both - per month, the second Tuesday of the month.  Out-of-band releases occur when there are challenges of high-risk security bug, which we had recently.  What seems to have happened, is that client machines have been updated to the latest version, while you try to put a version prior to these systems. We can check this by looking at the FlashInstall.log file on a client computer that returned this error.  The FlashInstall.log file is located in the following location:

    • 32-bit: C:\Windows\System32\Macromed\Flash
    • 64-bit: C:\Windows\System32\Macromed\Flash AND C:\Windows\SysWOW64\Macromed\Flash

    You can send the contents of the file in your response, or download it by following the instructions that the specified item was not found. and after the URL in the files downloaded in your response.

    To avoid this scenario does not happen in the future, you disable the updates on the computers of your customers and then only deploy updates through your system of the EDSM.  To do this, you will need to deploy a custom file with updates disabled for client systems.  The Flash Player Admin Guide examines various deployment strategies in Chapter 3.  Chapter 4 discusses managers features related to security, privacy, the use of disk space and so on, and the AutoUdpates section is on page 31.

    In addition, you can sign up to receive the Security Bulletin and the opinion here notice and Security Bulletins.  When a bulletin/notice is posted you would receive an email notification and can then go download the latest version, when it is validated and remove what to your client computers.



  • How to get the crop tool to work faster (is slow)

    I'm growing a few thousand photos, and the crop tool is just slow.

    Change the culture or the displacement of the image behind the harvest is nervous, sometimes he has seconds to change the display, which makes pain culture to work.

    Even though the image is loaded and the lightroom rested some time, cropping is slow, which should not be, since the image is entirely in memory and moving should be easy for the computer.

    So, how can I get the crop tool to go faster?

    I use a Win7 Core i7-2600 with 16GB of Ram, catalogue LR on Intel SSD, images on a fast SeaGate HDD, AMD Radeon HD 6800 grafics adapter, display of 30 "(2560 x 1600)." The files are a Nikon D800E NAVE, but my D700 files are slow, too.

    I've worked through this list , which helped a little, but not too much.

    I'd appreciate some tips!

    Thank you


    This is good and bad news.

    It must draw a ton of pixels in a higher resolution, and I suspect that it only uses the CPU to do. Have a faster card video likely would not help.

    While you perform your crop, maybe you could reduce the Lightroom window so that the actual image which shows takes less than half of the screen space. There has been posts on this forum that indicate an increase in high speed to keep the image small enough. It seems to be quantified: there are certain thresholds, when the Crusaders, causing big boosts in performance. Try a few experiments.


  • Is there a way to force to render all clips in the work area?

    Is there a way to force to render all clips in the work area? All clips: not only those with horizontal red line indicating that they need rendering! I ask this because videos made preview very well unrolled, but UN-rendered ones are not! My source of the layer film (project and) imply Full HD (1920 * 1080i 25 fps).

    If a Clip has not made, it will not be rendered.

    Basically, what the rendering is to convert the Clips, that don't require not rendered, DV - AVI (DD on a PC projects). This will produce AVI in the media Cache files, make files, and for reading, pre will rely on those. If you look in the folder of files of rendering, you'll see a bunch of files named in the abstract, but these files are now linked in the PREL (project file) and will be used by the program for reading.

    If one were to remove those go files and open this project in the first instance, they would receive a message, 'where's the file 04u434ip0ow. AVI? "[Note: that is just one example of the rendered file name abstract and is not the real name, you'd see.]. Could not ignore those missing now render files, and where they were used, it would be red lines on the clamps.

    As Steve mentions, rendering files are used only for smoother playback. As I use DV - AVI SD projects files on my PC, I have no need of rendering for a reading that is more gentle, until I have changes to the Clips, as superimposition of PiP, effects, titles, etc... I could never restore the timeline, even with these additions, but sometimes, I make a small segment several times, especially with animation effects, that I adjust the settings.

    If it does not receive more smooth playback, then make all the files to be rendered usually reading will greatly improve.

    Good luck and I hope it makes sense.


  • How can I remove the wireless network settings and the Working Group?

    I used the Setup Wizard to establish them, and now I want to remove them completely.  I use Windows XP SP3.

    Hi 13emily,

    Try the step below to remove the connection to the computer's wireless network.

    (a) click Start, click Control Panel, and then click network connections.

    (b) right click on wireless network connection and then click Remove.

    To remove a network component

    When you set up a network, Windows automatically creates a workgroup and gives it a name. As we cannot delete a task force but if you rename the working group which will remove access to other computers.

    To rename a computer

  • Update the State of the work using APEX_PLSQL_JOB. UPDATE_JOB_STATUS in the procedure


    I have trouble getting my head around the status of the work in APEX_PLSQL_JOB.

    I have a button on a page that presents a work using:
              l_sql := 'BEGIN validation_pkg.run_validations_job(NULL,:P7_APP_ID); END;';  
              l_job := APEX_PLSQL_JOB.SUBMIT_PROCESS(p_sql => l_sql,p_status => 'Validation Submitted');
    This creates a job runs my packaged procedure and returns the JOB_ID argument which I store in a table, so I can query its status thereafter.

    The job runs then but I want to update the status of the job as it progresses through the stages of the treatment, it runs. So, I want to call APEX_PLSQL_JOB. UPDATE_JOB_STATUS. This call requires two parameters, the JOB_ID argument and the new STATUS. The manual contains the code example:
    and says: APP_JOB is a "reserved" component that will automatically "replaced for you at runtime with the number of actual jobs.

    However, when I want to talk: APP_JOB in my code 'create a package body... '. ', as
    apex_plsql_job.update_job_status (P_JOB =>:APP_JOB, P_STATUS => 'Stage 1 Complete'); 
    It returns a "bad bind variable. compilation error 'APP_JOB'

    How can I make to APP_JOB in my procedure packed?

    Thank you very much


    You must add the p_app_job parameter for example to your validation_pkg.run_validations_job procedure.
    Then present you the work as

    l_sql := 'BEGIN validation_pkg.run_validations_job(NULL, :P7_APP_ID, :APP_JOB); END;';
    l_job := APEX_PLSQL_JOB.SUBMIT_PROCESS(p_sql => l_sql, p_status => 'Validation Submitted');

    In the procedure, then use you value of parameter in APEX_PLSQL_JOB. UPDATE_JOB_STATUS call

    APEX_PLSQL_JOB.UPDATE_JOB_STATUS( P_JOB => p_app_job, P_STATUS => 'New Status');

    Kind regards
    My Blog:

  • Why most of the work has disappeared from the artist list in the update of iTunes 12.5.1 and 10 IOS and how I get it back?

    Update to the latest version of iTunes on my iMac and update my iPhone to IOS10 why most of the work in the list of artist in my iTunes library disappeared, and how do I get it back?


    If you use iTunes game, try here > get help with iTunes - Apple Support

  • Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

    Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

    Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.


  • Conflicts between FF 37.0.2 and the Greasemonkey add-on extension disables certain built-in functions of Netflix. Is a fix in the works?

    After seeing that mouseover Netflix video descriptions were does more after the FF 37.0.2 update, I was able to isolate the problem (thanks to a suggestion by jscher2000 here: ). Even if my installed userscripts were functioning normally, have Greasemonkey enabled in FF 37.0.2 disabled built-in Netflix mouseover descriptions. Before the update, everything was fine. This issue is not present in Chrome or IE.

    Deactivation of Greasemonkey solved my problem of Netflix - but then all my userscripts are useless. I rely on Greasemonkey to enhance and customize my web experience. I can only assume some other issues posted the Mozilla Support that 37.0.2 creates problems with a number of modules and extensions. Is there a fix in the works, or should I downgrade to an earlier version of FF?

    The changes from 37.0.1 to 37.0.2 are pretty minor (Release Notes), but some changes are related to compatibility with card/chipset graphic driver software, which could affect the display of overlapping information. Since the display works normally when Greasemonkey is disabled, I don't think it's likely to be the problem.

    I suggest the reactivation of Greasemonkey and investigate scripts.

    While on Netflix, click on the small triangle of drop down next to the monkey button in the toolbar and look for the check marks indicating that a particular script is running on the page. Try to turn off scripts to see if you can follow the show down to an individual. I think you should reload the page between changes.

    Can you trace the problem to any particular script?

  • How can I hide/remove the work in mode column list of Videos at home?

    I just upgraded to El Capitan, and with it comes iTunes 12.  I loaded a few videos in my iTunes library I see the list of home videos view includes a column for 'Work' which doesn't seem to have a way to remove it (i.e., it is not in the list of questions for the customization of view column).  There is also no option to "Hide the work" under the menu bar show the item.  I don't want to see this 'work' (especially since it's some random frame of the video, which gives zero information!)

    Seen this work (even at the "small" setting) really expands my quite large list of videos needs space.  I want to turn it off.  But how? ! ?

    Thank you.

    I'm confused.

    KERIAH wrote:

    As I loaded some videos in my iTunes library...

    I don't know what that means «videos»  Then later you refer to 'videos' which confuses me even more.

    I don't see any category in the iTunes menu' called «Vidéo»  In my view, these are all categories:

    In addition, if 'home video' means something like an iPhone or iPad-production video, don't manipulate you in the app Photos?

  • Finally, mite update frm FF 3.6 at 14 for html5 (on the work of google last updated frm 3 to 5 services dint). will be history, bookmarks, site prefs etc be preserved?

    Finally, mite update frm FF 3.6 at 14 for html5 (on the work of google last updated frm 3 to 5 services dint). will be history, bookmarks, site prefs etc be preserved? probably used to active connections. extension & plugin compatibility is not really important.

    also, so simply, I hit update and do, will that opera-like "Firefox" menu appear or I have to do a clean install to get it?

    If you do the update of in Firefox bookmarks, preferences, history, etc. will be there. Active connections should work for most as well. The majority of your extensions and the plugin should work as well, but you may need to update after the update of Firefox.

    On Windows XP the menu Firefox is not by default, but if you want you can always enable it by going to view > toolbars and unchecking the menu bar

  • Is it possible to automatically check all bookmarks, then remove the works do not bookmarks

    Is it possible to check automatic all bookmarks and remove the works do not bookmarks

    Try this extension:

  • HP Deskjet 2512: HP Deskjet 2512 not print or copy in black but the color of the works very well

    Help, please. New cartridge. I remove the plastic. It is authentic HP inks. The works of fine color but black wont print or copy and that's what I use most. Aggrivating.

    Sorry it took so long to respond, but whenever I clicked on the link for the doctor to printing and scanning, it says the page has no load but, at random, he began to print in black. I printed the first screen of our conversation, just on the off chance that he himself and it printed fine so I tried a few other documents and all is good-to-go. Thanks a lot for your help! I'll be sure to mark my issue as resolved. Thank you!

    See you soon!


Maybe you are looking for

  • Continues to change the proxy server setting in Windows 7

    I am running Windows 7 on a HP laptop and have a problem with the proxy server setting.  Internet usage has slowed because it tries to use a proxy server and I do not have.  I can access the settings and uncheck the "use a proxy server" box, but it b

  • Blinking wireless card

    I just noticed that the card adapter wireless switch light blinking 'blue' and 'blue' - 'orange '. etc at a pace of about two flashes per second. Wireless still seem to work. I am, I headed a failure? HP Pavilion dv6500 Thank you very much.

  • ImageButton does not appear in C++ instead of QML mode?

    Goal: Show the image on the screen buttons. ERRO: ImageButton does not appear in C++ instead of QML mode. Question: something wrong in my code?, or the imagebutton control develops now? Mini code: imageButton = ImageButton:: create().defaultImage (QU

  • Linux and oracle database installation best practices windows

    can anyone recommend the guide of best practices for the installation/design of windows/Linux oracle database servers.Microsoft, sql Server, provide a number of useful resources on the evolution of the default parameters that can die of hunger the op

  • YouTube (or Media Encoder) changed over the past 2 weeks while processing MP4 crashes?

    I always made my MP4 projects before loading on YouTube. (2 h + videos)Over the past ~ 2 weeks, all my MP4 uploads have hung in the treatment. both 1080 p AND 360 p videos. When I go the same content as WMV (1080 p or 360 p) they treat them very well