Forefox will not work after the installation of XAMPP, just repeat me there is already an instance running even if there is no

Similar Questions

• Streets of MS & travel will not work after the installation. Message says reg. Error & re - install. Re-install does not correct.

  What happened the installed program 5 or 6 months ago after a vista update. even after uninstall the program and reg cleaning then reinstall error persists. Very strange for a coflict how MS product.

  Hello

  1. What is the exact full error message?
  2. Remember to make changes to the computer before the question?
  3. What version of Microsoft streets & trips do you use?

  I suggest you try the procedure described in the link below:

  Error message when you try to use the streets & trips: "your registry settings for this application were not correctly copied.

  http://support.Microsoft.com/kb/314590

  You can also check:

  MapPoint / streets & trips / Highway Solution Center

  http://support.Microsoft.com/ph/1058#TAB0

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• LIP does not work after the installation of a local language, writing in my windows software 8

  LIP does not work after the installation of a local language, writing in my windows software 8

  

  This icon is hidden... and there is no preview in the installed LIP.

  
  I hv uninstall the software, but for the LIPS does not work

  Hello

  You use the Microsoft Account or Local user account?

  Create a new user account and check the status of the question in the new user account.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

  You can also refer to:

  User accounts: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

  Thank you.

• Computer will not start after the installation of Kaspersky, will not even go into safe mode

  I tried to install Kaspersky on my laptop this morning to roll some viruses on my computer. After you restart during the installation, I got the blue screen of death with a STOP 0x000000F4 error code. I can't use my phone at all now, and it will not work in SafeMode either. I tried to restore the computer to before that Kaspersky was installed but it cannot do so. I tried to restore to the last known good configuration, but that did not work. I have no idea what to do now. My laptop is basically useless now and I am very angry.

  If I have the Kaspersky disk in I kind of access Kaspersky, and it keeps telling me it is obsolete and must be updated, but it will not be updated. Also, it tries to mount the drives or something and gets stuck trying to create the swap file. I don't know if it's important, but I'll post it anyway.
  I'm at a loss to know what to do...

  If you have tried to install an AV program after your PC has been infected you left it too late.

  Your safest option is to use your recovery discs to get destructive if you plant (make sure that the external devices are disconnected during this process)

  I hope that you, the data has been saved you will lose everything on the PC

  Once recovered allow windows update to do its thing for Important updates ONLY. It may take several reboots.

  If any update fails cure this problem before doing anything else.

  Once the update finished visit of manufacturers of laptop for important driver updates to update necessary.

  Only after this has been done, you should start installing software or external devices.

  If an installation fails, solve this problem before

• Mathcad 14 will not work after successful installation

  I have a new laptop and installed as the first software MathCad.  Installation meets with success.  Congratulations after the installation of liscence.  When I open the mathcad 14 in Start menu, the message...  Mathcad has stopped working correctly appears.  It's software I have intalled on XP, so I think that the disc I install is correct.  PTC has provided me with a new license for the new machine (I sent them the hard drive id and they provided new license).  Sometimes, I see a list of unregistered .ocx and .dll files.  I tried to launch the privileges to administrator and re-install/repair.  Same results.  Any ideas?

  Automatic reports have been sent to Microsoft.

  Having spent the last 48 hours trying to solve this problem of talking to TPC for two hours, I was finally able to reinstall the program successfully.  If you get an error message during the installation which results in error 1305.Error (i.e. check that the lib.tar file exists and that you can access), there is a problem with the length of the filepath name.  In addition, it might be a problem with the installation of MSXML 4.0.   Here are the steps I took:

  (1) I created a folder in my C: / drive with a very short name (i.e. two letters).
  (2) I downloaded the file CD_English.exe of the site Web of PTC for Mathcad 14.0.  It is under its support page.  This is the version put out on listening to Mathcad 14.0.  I extracted all the files in the new folder of file with a short name.
  (3) after downloading, I opened the PreReq file and clicked on all the files listed for install.  When you install msxml, go through the Setup Wizard and click on modify.  Make sure that the XML SDK option is checked.  Complete the installation.
  4) go to the setup.exe file and install Mathcad.
  I hope this will work!

• Reference Dell OMSA - does not work after the installation of KB3161608

  I recently installed the last batch (June 2016) the MS updates on our servers.  It went well with the exception of two servers, both running Server 2008R2 and a PE2970, a PE2950.  These are our only two servers running server 2008R2.  On both machines, after installing all the updates, I was unable to open OMSA.  The browser will display "Internet Explorer cannot display the webpage".  OMSA continued to work properly on the rest of our servers, which are almost server 2008.

  I tried another browser, but that has not worked.  OMSA reached 7.3, so I downloaded and installed 7.4.0 and the 7.4.0.2 updated.  I found references to similar online, and some of the install OMSA fixes problems using the prompt, or "runas admin".  I installed them all over the place, but no matter how I installed it, I got the same result!

  I've not found errors in the event logs of the server.

  So I started uninstalling updates until I found the one who broke it, and it was KB3161608.  Uninstall this update fixed OMSA on both servers.

  This updates is listed as optional, so I'm not sweating it for now.  I believe that this is a certificate problem and could be fixed by creating a new self-signed server certificate, but this isn't really my area of expertise.  But I wanted to put this out there in case it might help someone else.

  In my tests, you should communicate the updates installed then OMSA will not work.

  KO 3161608

  KO 3172605

  KO 3172614

• My internet does not work after the installation of El Capitan 10.11.3.  Help, please!

  I upgraded to El Capitan 10.11.3 tonight and now internet will not work.  I can't connect to the app store either.  I can connect to wifi but safari says "Safari cannot open the page.  Safari can't open the page "https. ' / / www.yahoo.com/.  The error is "the operation could not be completed.  Operation not permitted. (INSPOSIXErrorDomain:1) ' can someone help!

  Thank you!

  Hi SmilingDaddy

  Here are a couple of things to try. Here I am assuming you are using a wireless router?

  Open system preferences > network

  The name of your network appears in "network name"?

  Click on the button "Advanced...". »

  In the WiFi list, make sure that your preferred network is at the top of the list.

  Click on the TCP/IP tab and click on 'Renew DHCP lease'

  Now you have Internet?

  Try turning off WiFi, either in the same pane of network, or by clicking on the WiFi icon in the menu bar. Then wait a minute and put it back on.

  If you hold down "Option" key and click the wireless in the Menu bar, you can click on the 'open Wireless Diagnostics... '. "There is also info even before making it on the signal strength, etc... WD can give you help and additional information.

  Let us know if it works and if not, please give any info you can. Are you using WiFI? Are you using a cable/DSL Service? What model of iMac?

  Hope this helps, Greg

• Audio does not work after the installation of Vista on Satellite Pro a series?

  Done a format and a new facility with vista ultimate and can't get the audio from realtek to work.
  The drivers install properly but don't have still no sound.

  Download realtek 97 and drivers HD, but still no luck.

  I had this problem some time and fixed it but I can't find where I found the solution of :(

  Any help would be great, thanks!

  Hello

  First if all would be very useful to know which model of laptop you have.
  Second, you could find the driver of his right on the page of Toshiba and so you n t need to test several audio drivers! The one on the Toshiba driver site works for sure.

  I read about a similar problem on Vista OS and these Toshiba document should help you:
  [Audio cut off (no sound) after the installation of Windows Vista: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1886 758xml & sliceId = & dialogid = 54568603 & stateId = 0 0 51373343]

  Check it out!

• Bat button fn - b Audio does not work after the installation of Win 8.1

  I read here about what is a problem.  I tried about 4 things without success, so I am posting this!

  I have beats HP Envy edition 14-2166se laptop which works entirely 8.1 update Win and using the audio driver sp63555.

  Everything works including the audio beats program just cannot move to the fn - combo button b or to disable the function controller audio beats. Any help would be great!

  Hello

  In this case, try the following.

  Open windows control panel, open programs and features, right click on the "HP System Event Utility" entry and choose uninstall.

  Once this done, reboot the laptop and let Windows load completely for a few minutes.

  Then, download and install the software version of HP Quick launch on the following link.

  http://h30642.www3.HP.com/pub/SoftPaq/sp56501-57000/sp56929.exe

  When the installation has finished, restart the computer again and let Windows load fully before checking the key combination fn + b.

  Kind regards

  DP - K

• Some Java applets do not work after the installation in silent mode, resolved in tilting head "enable Java content in the browser" - why?

  We have about 1 800 workstations with Windows 7 (32-bit and 64-bit) running different versions of JRE Java 6 update via update 7 51 32.  Most are on 6 45 update.  We would like to standardize on update of Java 7 51 (32-bit) and get everyone updated to this version for security reasons.

  For the last two weeks, we had trouble with our driver prior to installation.  What we are seeing, it of that our procedure successfully closed all open Internet Explorer Windows and processes related to Java, uninstall all older versions of JRE Java and says then successfully installed of the update of Java 7 51.  The Java Control Panel works.  We can even take Internet Explorer to check the Java Version or Java Tester - what Version of Java are you running? and confirm that the Java applets on these sites load (although the latter only works after adding the site to the list of site exceptions); However, when the testers try to access our system Kronos Workforce Central 6.3.10, used by this system Java applets do not load.

  We tried the following things, which none worked:

  • Empty the Internet Explorer browser cache and cookies.
  • Clear the local Java cache.
  • Restart the computer.
  • Reset Internet Explorer settings, including personal settings.

  Go to the Panel control Java, ranging in the Security tab, uncheck "enable Java in the browser content", the only thing that works based on apply, press OK in the pop-up window, checking the box "Enable Java in the browser content", press OK, press OK in the pop-up window and then restart Internet Explorer.  It is only after this point, all Java applets, including those used by Kronos Workforce Central 6.3.10, work.

  What I need to know, is how I can automate the reset procedure from the box "Activate Java content in the browser" after installation, or I'm something wrong or missing a step in automatic installation that is originally for this?

  We use Microsoft SCCM 2007 R3 to perform this upgrade, and everything is run on the client computer by using the SYSTEM account.  First of all, the "javaclean.ps1" PowerShell script is run, with part of the process of command line change of the strategy of running script PowerShell for Bypass.  This script handles the closure of Java-dependent applications and Java deals and uninstall older versions of Java.

  javaclean.ps1:

  #Find all Java products, excluding the automatic update that actually is uninstalled when the main installation is removed.

  write-host "If you are looking for all versions of Java installed" - ForegroundColor yellow

  [table] $javas = Get-WmiObject-query "select * from win32_Product where (name as" Java % ' or name like '% of Java (TM)' or "J2SE %") and <>the name «Java Auto Updater»»

  If ($javas.count - gt 0)

  {

  write-host "Java is already installed" - ForegroundColor yellow

  #Get all Java processes and kill them. If java is running and processes are not killed then this script will call a restart suddenly.

  [table] $processes = Get-Process-name "Java * ' #-erroraction silentlycontinue

  $processes += get-Process - name "iexplore" #-erroraction silentlycontinue

  $processes += get-Process - name "firefox" #-erroraction silentlycontinue

  $processes += get-Process - name 'chrome' #-erroraction silentlycontinue

  $processes += get-Process - name "jqs" #-erroraction silentlycontinue

  $processes += get-Process - Name "jusched" #-erroraction silentlycontinue

  $processes += get-Process - Name 'jp2launcher' #-erroraction silentlycontinue

  If ($processes. Count - gt 0)

  {

  foreach ($myprocess to $processes)

  {

  $myprocess.kill)

  }

  }

  #Loop through the Java products installed.

  {foreach ($java to $javas)

  write-host "Uninstall" $java.name - ForegroundColor yellow.

  $java. Uninstall()

  }

  }

  Once this script is complete, SCCM calls a script VBS "install.vbs" to perform the installation of Java JRE 7 day 51.

  install.vbs

  '* ********************************

  '*

  ' * Script: install JRE 7 routine

  '*

  ' * Date: 14/03/14

  ' * Author: [REDACTED]

  ' * Rev: 1.0

  ' * Notes:

  '*

  '* ********************************

  '--------------------------------

  ' / / / Common

  '--------------------------------

  Set objFSO = CreateObject ("Scripting.FileSystemObject")

  Set objWshShell = CreateObject ("WScript.Shell")

  «Get the system architecture»

  Protected colSys: Set colSys = GetObject("WinMGMTS://"). ExecQuery ("SELECT AddressWidth FROM Win32_Processor", 48)

  Dim objSys

  For each objSys in colSys

  If objSys.AddressWidth = 64 then bolIs64Bit = True

  Next

  'Get the operating system

  Dim colOS: Set colOS = GetObject("WinMGMTS://"). ExecQuery ("" Select * from Win32_OperatingSystem ", 48")

  Dim objOS

  For each COS in colOS

  If left (objOS.caption, 20) = 'Microsoft Windows 8' then

  bolIsWin8 = True

  WScript.Echo "win8.

  End If

  If left (objOS.caption, 22) = "Microsoft Windows 8.1" Then

  bolIsWin81 = True

  WScript.Echo "win81."

  End If

  Next

  ' Set 32-bit directory program files

  If bolIs64Bit = True Then

  strPFILES = "Program Files (x 86)".

  strSYSDIR = "SysWOW64".

  Else strPFILES = "Program Files."

  strSYSDIR = "System32".

  End If

  ' Set repertoire_windows

  strWIN = objWshShell.ExpandEnvironmentStrings("%windir%") "

  'Set the current directory ".

  strCurrentDir = objFSO.GetParentFolderName (Wscript.ScriptFullName)

  ' Set computer name

  strCompName = objWshShell.ExpandEnvironmentStrings("%computername%") "

  '--------------------------------

  ' / / / Main script

  '--------------------------------

  '--------------------------------

  ' / / / Installation using .msi & capture exit code

  '--------------------------------

  ' intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\package.msi" "" & "TRANSFORMS =" "" & strCurrentDir & _)

  ""\transform.mst"" "ALLUSERS = 1 Reboot = ReallySuppress/SB»(, 8, True)"

  ' wscript.quit (intExitCode)

  ' * COMMANDS RUN HERE *.

  "Create the folder structure if it does not already exist

  strFullPath = 'c:\Windows\Sun\Java\Deployment' "

  "How many levels are there in the path?

  nLevel = 0

  strParentPath = strFullPath

  Do until strParentPath = «»

  strParentPath = objFSO.GetParentFolderName (strParentPath)

  nLevel = nLevel + 1

  Loop

  ILevel = 1 to nLevel

  "Path of directory to the iLevel level to understand

  strParentPath = strFullPath

  For j = 1 To nLevel - iLevel

  strParentPath = objFSO.GetParentFolderName (strParentPath)

  Next

  ' Is it exist directory? If not, create it.

  If objFSO.FolderExists (strParentPath) = False Then

  Set newFolder = objFSO.CreateFolder (strParentPath)

  End If

  Next

  "Kill process

  objWshShell.Run "taskkill /F /IM iexplore.exe", 8, True

  objWshShell.Run "taskkill /F /IM firefox.exe", 8, True

  objWshShell.Run "taskkill /F /IM chrome.exe", 8, True

  objWshShell.Run "taskkill /F /IM javaw.exe", 8, True

  objWshShell.Run "taskkill /F /IM java.exe", 8, True

  objWshShell.Run "taskkill /F /IM jqs.exe", 8, True

  objWshShell.Run "taskkill /F /IM jusched.exe", 8, True

  "Copy deployment files

  objFSO.CopyFile strCurrentDir & "\deployment.config", "c:\Windows\Sun\Java\Deployment\", True

  objFSO.CopyFile strCurrentDir & "\deployment.properties", "c:\Windows\Sun\Java\Deployment\", True

  "Disable UAC".

  ' If bolIsWin8 or bolIsWin81 = True Then

  "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop t REG_DWORD 0 f d", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM v EnableLUA /t REG_DWORD /d 0 f", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM/v ConsentPromptBehaviorAdmin t REG_DWORD 0 f d", 8, True"

  "End If

  "Install application".

  intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\jre1.7.0_51.msi" "IEXPLORER = 1 AUTOUPDATECHECK = 0 = 0 JU JAVAUPDATE = 0 WEB_JAVA = 1 ALLUSERS = 1 Reboot = ReallySuppress/qn", 8, True ")

  "Enable UAC".

  ' If bolIsWin8 or bolIsWin81 = True Then

  "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop /t REG_DWORD /d 1 f", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM EnableLUA /t REG_DWORD /d 1 f v", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM v ConsentPromptBehaviorAdmin /t REG_DWORD /d 5 f", 8, True"

  "End If

  WScript.Quit (intExitCode)

  '--------------------------------

  ' / / / Installation via .exe on network

  '--------------------------------

  "objWshShell.Run" "" "& strCurrentDir &"\Setup.exe"" s - sms - f1 "" "& strCurrentDir & _"

  "" "\setup.iss" "-f2" "" & strWIN & "\Temp\Install-app.txt" "", 8, True

  "Need to turn off the security warning opening the file first.

  Set objEnv = objWshShell.Environment ("PROCESS")

  objEnv ("SEE_MASK_NOZONECHECKS") = 1

  ' intExitCode = objWshShell.Run ("" "& strCurrentDir &"\jre-7u45-windows-i586.exe"" /s /v "" / norestart "& _)

  ("" "TRANSFORMS =" "" & strCurrentDir & "\Tribe-jre7.mst" "", 8, True)

  ' WScript.Quit (intExitCode)

  ' * COMMANDS RUN HERE *.

  "Then turn it back on.

  objEnv.Remove ("SEE_MASK_NOZONECHECKS")

  '--------------------------------

  ' / / / Features

  '--------------------------------

  Help on this issue would be much appreciated!

  It turns out that it is actually a problem with Kronos Workforce Central.  We had the parameter 'site.java.plugin.CLSID.familyVersion' as an application set to "clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA", which is the CLSID Java Java 6.  After update this value to "clsid:8AD9C840 - 044F-11 D 1-B3E9-00805F499D93" (the universal CLSID of Java), this problem does not occur when the automatic upgrade of Java.

  We also have good Java 6 and 7 in our environment and did during our implementation of Kronos, so I don't know why we used the Java 6 CLSID in the first place.

  Detective Conan!

• LivePatch does not work after the installation of 2.18 MW

  Hello
  I just installed 2.18 MW. (BTW, the installation will fail if you are using a '!' tank in your system user password).
  I then created a customer. I've created a project yet.
  I clicked on the tab LivePatch because I want to reach 2.19 before I have create my project. The following errors below were posted. Can I fix it now? I have an aru_mw_r12_version.txt file (I have currently). I would like to know that my installation is valid/work/good.
  Thank you, Dean
  ----
  Checking Version LivePatch
  The current Version of LivePatch is 2.18
  Last Version of LivePatch is UNKNOWN
  A later version of the Maintenance Wizard is available.
  Run the phase 1 of the automatic LivePatch...
  LivePatch Phase 1 output
  
  ERROR: std.err has produced:
  tail: unable to open ' / Stage/patches/MWiz/aru_mw_r12_version.txt' for reading: no such file or directory
  tail: unable to open ' / Stage/patches/MWiz/aru_mw_r12_version.txt' for reading: no such file or directory
  [/ mwiz/oracle/mwizdb/10.2.0/eof/scripts/COMMON/auto_livepatch.sh[1596]:
  /mwiz/Oracle/mwizdb/10.2.0/EOF/log/INSTANCE_-99/get_from_url_.log: cannot create [no such file or directory]
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  egrep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  [/ mwiz/oracle/mwizdb/10.2.0/eof/scripts/COMMON/auto_livepatch.sh[1596]:
  /mwiz/Oracle/mwizdb/10.2.0/EOF/log/INSTANCE_-99/get_from_url_.log: cannot create [no such file or directory]
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  egrep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  [/ mwiz/oracle/mwizdb/10.2.0/eof/scripts/COMMON/auto_livepatch.sh[1596]:
  /mwiz/Oracle/mwizdb/10.2.0/EOF/log/INSTANCE_-99/get_from_url_.log: cannot create [no such file or directory]
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  egrep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  [/ mwiz/oracle/mwizdb/10.2.0/eof/scripts/COMMON/auto_livepatch.sh[1596]:
  /mwiz/Oracle/mwizdb/10.2.0/EOF/log/INSTANCE_-99/get_from_url_.log: cannot create [no such file or directory]
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  egrep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  [/ mwiz/oracle/mwizdb/10.2.0/eof/scripts/COMMON/auto_livepatch.sh[1596]:
  /mwiz/Oracle/mwizdb/10.2.0/EOF/log/INSTANCE_-99/get_from_url_.log: cannot create [no such file or directory]
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  egrep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  LS: p *: no such file or directory
  CP: cannot create the file ' / mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_-99_.sh': no such file or directory
  =====================================================================
  The phase 1 beginning of LivePatch to Wed Oct 10 14:13:31 EDT 2012...
  By using the existing LivePatch directory for log files: /mwiz/oracle/mwizdb/10.2.0/eof/livepatch
  Download the latest version of the Maintenance Wizard LivePatch.
  
  Runs the script to download get_from_url_ - 99_.sh in/internship/patches/MWiz
  
  ################################################
  
  ERROR - looks like ftp failed, see ls-l p\ * (see above) of EOF_PATCH_TOP
  EOF_PATCH_TOP = / stage/patches/MWiz
  Journal of session: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_\*.log
  ===================================================================
  (1) ask the administrator trying to run the ftp script manually.
  OR
  (2) HOME/.netrc value, then try to Script: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_-99_.sh
  
  Get_Patch_Updates utility to download p_R12_GENERIC.zip from updates.oracle.com
  ERROR: Could not download the latest patch to MW.
  Please download and manually it apply.
  =====================================================================
  ERROR! Cannot download the patch to updates.oracle.com.
  Please see /mwiz/oracle/mwizdb/10.2.0/eof/livepatch/auto_lp_26574.log for a more detailed error.
  =====================================================================

  You can use the manual method to download the livepatch.

  If you want to continue to resolve this with me that is fine also.

  Some time after the release of Maintenance Assistant 2.18, Oracle has changed how they connect to the server updates.oracle.com causing connections and downloads to fail.

  The solution is to 2.19 and this is the reason that the ftp was unable to download the patch. You could manually place the patch in the directory EOF_HOME/patch $. This should cause the tool to use the already downloaded patch and don't try to ftp the patch from the update server.

  Thank you

• Re: Vista will not start after the installation of update

  About 2 days ago I updated 2 Optional updates through windows update. It was - Input - Synaptics Synaptics PS/2 Port TouchPad
  and somethind to do with sound hdmi (don't know why I got this update ' cos I do not have a hdmi and I accidentally installed it as well).
  After that installs Vista won't start so I did a restore of the system in safe mode, and she came back to life, however, isn't in better shape, will probably not not to install Vista all over again.
  So be careful when you install these updates.

  It's weird that they came with windows update. As much I know usually windows update does not update if not needed harddrivers...

  You need to update your hardware drivers from the Drivers Toshiba download site and not from Windows update because no one knows if they interfere with the drivers of Toshiba.