format specifier syntax - several commands syntax

Similar Questions

• Too little of the format specifiers.

  Hello someone can help me format this correctly? It keeps giving me the error too little the format specifiers.

  At some point, you mixed up of your string format and you put the string name. Wire directly your group name in the name of Group on the TDMS VI entry. And then thread the pipe name format string in the format string driveway. See here:

  

  You must do this to 3 loops.

• FM and the FX format specifier.

  How can I disable FM or FX format specifier in the oracle form builder? I mean, where I could find these format specifiers, so that I couldn't turn off em and don't get error ORA 01850?

  Hello!!!

  Try this:

  If: block4.ten_rec_dt is of type Char and: block4.ten_rec_tim is of type char and then

  use:
  TO_DATE (: block4.ten_rec_dt |) » '|| (: ' block4.ten_rec_tim,'DD/MM/YYYY HH24:MI:SS)

  If: block4.ten_rec_dt is DATE and: block4.ten_rec_tim is the DATE then

  use:
  TO_DATE(TO_CHAR(:Block4.ten_rec_dt,'DD/mm/yyyy'). » '|| TO_CHAR (: block4.ten_rec_tim, 'HH24:MI:SS'), "DD/MM/YYYY HH24:MI:SS")

  Kind regards.

• Question about syntax of Format specifier

  Dear community,

  I try to write data in an Excel file, it does not work properly. My problem is that I'm not able to get the correct number of decimal points in my data. I would have three decimals after the comma (and not a period) and am currently using "% 3d" as a specifier to format syntax but it seems to round the data to numbers with no decimal point. I enclose below two screenshots, one of VI and the output of said file.

  Any suggestion would be great!

  Thanks in advance,

  

  Use .3f. Le.3 is for the number of digits after the decimal point and the f for a floating point number.

• HELP format specifier

  I read this transmition of port COM 1 using VISA Interactive Control.

  +0.0000000E+00\x00\x00\x00\x00\x00-0.3127200E+02\x00\x00\x00\ x00\x00 +0.0000000E+00\x00\x00\x00\x00\x00 +0.0000000E+00\x00\ x00\x00\x00\x00 +0.0000000E+00\x00\x00\x00\x00\x00 + 0.0000000E + 00\x00\x00\x00\x00\x00 \x00\x00\r\n

  I use the string function analysis.

  I need engineering form numbers and ignore the '\x00 '. the space "" and then to acquire the second number "-0.3127200E + 02. And so on!

  I tried several different format without much luck specifiers! (I get only the first number)

  Any help for a new user out there?

  Thank you, Ross

  You helped me! Characters \x00 were some representations of INTERACTIVE of VISA control, in the data stream, in fact they were

  binary 0000 0000 0000 0000. I used search and replace patternVI to delete all characters, I didn't need to flow. Thanks for your time, it lead to the answer I needed! THX

  

• How to understand the format of hyperic shell command line?

  I logged on the hyperic shell and I just wanted to check on the orders and their
  output.  Im having trouble understanding the syntax I do a list alert and get:
  
  alert list
  org.hyperic.util.shell.ShellCommandExecException: error getting alerts
  In undeclared throwable was: java.lang.ClassNotFoundException: org.hibernate
  .collection. PersistentBag (no security manager: RMI class loader disabled)
  
  When I use the "list alertdef" command it comes back with: ""
  list of alertdef <-group | -plate-forme | -Server | -service > < resource > [-activated |-disabled]
  
  Replace - platform with linux - say? or a particular computer Devils name
  what they are referring to with resource? is the agent HQ a resource?
  
  What is necessary and what is not. . Cant seen to get anything to work.
  An example of this command is all I need.

  You will see many orders with a syntax similar to the alertdef list.  You
  do not replace the '-' keywords with anything, it has the 
  that you would replace it.  The can be the ID of the
  resource (if you know it) or the name (use quotes if there is)
  (spaces).  For example, I can do:

  alertdef list - server 10001

  or

  list of alertdef - HQ Agent server 'hq.hyperic.com '.

  In addition, as shown in my example, the central administration Agent is indeed a resource.
  It is a server.

  Charles

• RUNTIME ERROR NOT FATAL: unknown source Position, the 0x000027D0 thread id: type of inconsistent parameter with the format specifier.

  I'm under CVI 2013 SP1 with debug level set on scope.

  I changed a parameter in a FmtFile formatting function call and now receive this error. I wonder why the CVI can not handle this error, that is, find out about the number line... You can have more than one function of Fmt...

  Hello Wolfgang,.

  I have reproduced the error as you described in Debug64 configuration only. In the Debug configuration, the source location is specified, so I opened the bug 472987 follow. The problem seems to be in 2013 LabWindows/CVI.

  You also experience this problem in the Debug configuration? If so, could you please give a sample?

  Thank you for your input,

  Nelu F. | National Instruments.

• Impossible to format document with several paragraph styles and notes

  I'm working on a document where I have several text boxes on the same page. The text boxes reflect implemented different paragraph styles so that they will autopopulate in my table of contents. However, I need to add notes to this document. I find that the notes are at the end of the text box to which they apply to, and if I had to put a note in two different text boxes on the same page, both start at 1.

  Is it possible to manage notes in several text boxes? Or, if not, is it possible that I can attach my table of contents for the styles of characters instead of paragraph styles?

  Thank you!

  Looking at your screen shot in post #2, I see no reason to require individual images. You can manage every bit of this formatting in a unique setting using the styles section to control alignment, and dashes.

• FM crashing when it formats import / closes several files in a book

  FM hangs EVERY time it closes several files. I first noticed this problem when I tried to import the formats through all the files in a book. It would work for less than 10 seconds, and then it will disappear. My theory is that the accident occurred at each closing several files FMis and it makes sense (to me) because it seems that FM opens and closes each document in a book when the formats are imported in all of the files in a book.

  I first noticed this crash once I had changed several settings in an existing address to change the way the pages are numbered in all of the work (management wanted to change to a 'constant' numbering system from the first to the last page of the book to a relative numbering system where numbering begins with each chapter). I do not remember the specific changes I made when I got this crash, but this accident has been constant since this point.

  It is played like this...

  1. I select all the files in a book and select file/import/Formats.

  2. I click on apply, then I can get a few 'cannot Ωtre annulΘe' alerts regarding the undo history.

  3. then the accident occurred and I get the following alert from Windows...

  

  4. my solution was to open all the files in the book and then import formats. This does not create an accident; HOWEVER, the same accident will happen if I try to close all open at the same time by selecting files, right-click and choosing Close.

  5. it's really impact my workflow because the only other workaround to avoid a crash is to close each file separately, and it's extremely frustrating, especially when I'm dealing with a book that contains 60 files.

  I am a relatively new user, and I'm certainly not the more technical user in this forum. I use Windows 7 and FM 11.01.382. I searched on the internet several times and I have not found this topic, and I'm sorry if this is covered elsewhere.

  Thanks for any help!

  Instead of selecting all the files in the book, have you used them open all the files, options, save all files and close all files at the level of the book? In the book file, just hold down the SHIFT key before clicking on the option of the file menu and you should see the options "All".

• What is the parameter to specify on the command line for thunderbird automatically send email.

  I do apply to using macros Calc and precise automatically send emails, I know it's possible, to inform the parameters through a command line, but Thunderbird does not send automatically receives them, only the parameters, fill in the fields, but the send command are required manually.

  Thunderbird does not authorize this transmission stripped.

• Scan of the file: path/data not in the format specified in double

  Can you get it someone please let me know why it does not work?

  It's just a piece of sample code, to write data in a txt file and then read it.

  First, if a file already exists when I want to write in it and I chose 'Replace the file', he says stop and double track.

  Second, if I write a new file, it says: error 85: Scan failed. The input string does not contain data in the expected format.

  Attachment VI.

  EDIT: see post.

  Just for reference, I solved it by using the match VI pattern in a loop and then using the table of indexes for individual values.

• Formation of a U8 command with input of data values

  Hi all

  I want to generate a U8 command with the given input values-

  Order is generated using parameters follwing the user would enter.

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Q2	PAGE			Constant			1ST QUARTER
  	P2	P1	P0
  0/1	These 3 bits form a page			0	0	0	0/1

  Where,

  1st quarter & Q2 are qualifiers whose value can be 0 or 1 binary.

  The PAGE of form P2, P1, P0 bits.

  Now, I want to develop a VI where user will enter Q1, Q2, and PAGE value of 0 x 0 to 0 x 7 and a U8 command should come from these three entries.

  For example. If Q2 = 0, T1 = 1 and PAGE = 0 x 5, then exit the VI should be a U8 command 0 x 51.

  I tried this using a function to reach the numbers, but it generates a U16 that is undesirable.

  So, I guess that this must be done using some of the techniques of handling bit as ANDing.

  Kindly help me in this regard.

  Best regards

  Snehal

  Hi Alain,

  two possible solutions:
  

• BlackBerry Smartphones Media Card Format fail on several good maps

  I did a little digging, trying to find a solution to my problem before I posted, but most of the positions in the vein of a Media Card not recognized/not possible to format off trail 'is your SD card bad?' with no further response. Here is where I am:

  My phone: Blackberry Curve 8330

  My carrier: Verizon

  My OS: v4.5.0.175

  My problem:

  2 GB media card has been used in the phone since purchase in July ' 08. Since 2 weeks, bed phone is no longer media card. Media card is recognized by phone (which means the phone detects whether or not the card is present). Error message 'Media card can not be read. Check that the memory card is formatted. "Failure to put in shape via phone immediately. When you connect to the computer via the USB port (with mass storage permit), Blackberry device is recognized, but no media card is present. A gray (i) drive appears in my computer, but is inaccessible and cannot be checked or formatted (error message; "Please insert a disk into the drive I :).

  Attempts at solutions:

  Used 3 different media cards: 2 GB Sony 2 GB PNY, 8 GB. Each of the cards tested via a SD adapter and play properly in my computer: can move files to/from, checkdisk and reformat. Have all PC formatted. Each card gives the same error 'Media Card... formatted"as shown above. Hard reset (battery pull) has no effect. Have removed battery for 48 hours (in which case there was stubborn capacitors, or something like that). Support storage of mass and the Media Card encryption or powered off, remove and reinserted card with each parameter not changed, no effect (I can give you a list of all of this, but you get the idea. I'm decently thorough). Rolled back the OS to the previous version (via Desktop Manager), problem still exists. Re-upgrade to the current version, without change.

  To sum up, the phone works very well, but media card can thus not be there. It is not the credit cards, and I don't think it's the software, because I changed the OS from top to bottom, so I guess that maybe material. I would be grateful for all suggestions, and if you need any additional information, I will do my best to provide.

  -SanityDeleted

  Hi and welcome to the Forums!

  Excellent diagnosis! Play well!

  Unfortunately, your data, the only thing I can conclude is a problem with the hardware of the BB itself. You have done everything that I can think of to determine the root cause, and everything points to the material BB. Since you're out of warranty, if you purchased an extended service agreement, you can study the use of this. Otherwise, I'm sure that your carrier will recommend replacement - at a price (for you).

  Best!

• connection via SCP without password or to specify in the command line

  I want to move some files on SCP between two servers ESXi 4.1 by script. How can I configure SCP to copy files without asking for password? I tried the command ssh-keygen rsa - t, but this command does not exist within ESXi

  Looks like you need Lamw ghettovcb backup script.

  With plink you can have this feature without reinventing the wheel.

• UDF custom format specified in OIM 11 g

  Hello
  
  According to the requirement of my client, I need to add a new attribute, UDF, customized to the user's profile. And if users update this attribute in the user profile, they must fill in a specific format. If they don't, I have to display an error message on the screen of the user's profile.
  
  Please provide steps to customize the user profile of OIM 11g according to the above scenario.
  
  Thank you.

  Customization in OIM 11 g 2