Formatting card Micro SDXC for Permanent storage

I own a Macbook Pro retina 15 inch mid 2014 with a 256GB SSD internal 10.11.5 running.

I recently bought a SanDisk Micro SDXC (class 10) 128 GB card with an adapter clever so that I can record it permanently inside the slot for SD card in my MBP.  I have about 80 GB of music in my iTunes library and would like to transfer more in this SDXC card, therefore, freeing up tons of space on my disk flash SSD internal.

I do not always plan using SDXC with a PC card, my boyfriend suggested I have format as MAC OS (journaled) to take full advantage of his speed.

My main question for the Apple community is:

Should what plan I use?  Partition GUID, Master Boot Record or Partition Apple card?

If I were you, I use partition GUID card.

Tags: Notebooks

Similar Questions

  • Windows does not recognize the micro sdxc card

    Just buy a tablet in surface 2 and install a card micro sdxc 64 GB in it but it is not displayed anywhere

    Hello Joful,

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    Who is the manufacturer of the micro sd card?

    Thank you for details on the issue.

    SD card cannot be detected either if the required driver is not installed or is corrupted. A driver is a software that uses a device to work with your PC. Every device needs a driver to work with the PC.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check. Please follow these steps:

    a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.

    b. click or type 'show all' and then click on or type "material and devices."

    c. click or tap on "Next" and follow the on-screen instructions.

    If this does not help, use method 2.

    Method 2:
    Please use the suggestions contained in this Microsoft support article and check the issue.
    Reference:
    What happens if a wired device is not installed correctly?
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • File too big for empty 2 GB card Micro SD 32 GB in 7 stream HP?

    Cannot move a file video 2 GB of drive C to 32 GB Micro SD card.  Got an error message that the file was too big.  I formatted the micro card after it is inserted and moved several files of photos to the card without any problem.  Is there a setting to remove the limit of file size?

    For the record, I was able to save the video file to OneCloud, however.

    Hello m9040n_user,

    When you say that you have formatted the card in the Tablet, I assume you used either EX-fat or NTFS.

    Either format should allow large files to be placed on the SD card.

    I would like to ask how you move the file, and you are sure that the SD card is selected.

    If the SD card is formatted in bold EX, try NTFS to see if that makes a difference. It shouldn't matter, but it's worth it as some have reported problems with the EX-graisse works correctly.

    NOTE: Reformatting will wipe away all of the files on this drive so make sure its backup to the top.

  • BlackBerry Z10 Micro SDXC taken care of?

    Good day to all!

    The Z10 specifications indicate support for Cards microSD, up to 64 GB. I need to buy one because I get my Z10 next week.

    Question: can I install a Micro SDXC card like http://www.amazon.ca/SanDisk-MicroSDXC-Memory-Adapter-SDSDQUA-064G-U46A/dp/B007WTAJTO/ref=sr_1_1?ie=...

    Thanks in advance!

    Hi rpwings,

    I bought this card adapters for my device and it works. A catch but... when I first inserted into my camera, it would not be recognized. If you have this problem, just reformat the card support in the device by going to setting > storage and access, scroll down and select format the media card.  It should then work.

    Good luck and enjoy your new unit when you get it!

    (If you have any other questions, feel free to ask... we will do our best to help answer what we can).

  • Which card to use for the backup of Win8

    Windows 8 requires a minimum of 32 GB card to use for the backup. I bought a PNY 32 GB (http://www3.pny.com/32GB-Pro-Elite-Series-Hi-Speed-SDHC-Class-10-UHS-1---35MBs-233X-P3122C442.aspx ), but it wouldn't work. Even though it says 32 GB it is actually a little less. If I buy a 32 GB SanDisk will, that I meet the same problem? Exactly what the size is a SanDisk 32 GB card? (http://www.sandisk.com/products/memory-cards/sd/standard-class4/?capacity=32GB)

    Thank you

    Ed P2

    any card 32 GB will be less than 32GB after it is formatted to be used in a computer. It is a standard for all types of storage.

    If you need 32 GB of actual useful storage space, you will have to get a 64 GB card.

  • Micro SDXC 64 GB compatibility with Libretto W100?

    Hi, is a micro sdxc 64 GB compatible with Libretto W100?
    Rgds.

    Post edited by: massimod1d1

    The SD card slot supports them micro SD card: 2 GB and micro SDHC up to 16 GB card

  • Equium A100-027 - driver for mass storage controller

    Hello

    After installing Windows 7 32 bit, multimedia card reader does not. All drivers and updates are installed, except the driver for mass storage controller, I can't find this driver anywhere.

    Help, please

    Thank you

    Hello

    Mass storage controller means normally only the card reader so you have to install this driver.

    Have you tried to install the 32-bit driver for Vista? Normally, the Vista drivers also work on Windows 7.

  • Spectrum x 2 and Micro SDXC

    Hello

    I recently bought a spectrum x 2 (product number: F7T43EA #ABU) and the manual says it has a Micro Sd slot but not will is compatible with Micro SD, Micro SDHD and or Micro SDXC.  I don't want to spend the money on a card that is not taken in charge, so which of these will it.  I really want a 64 GB SDXC card.

    Thanks in advance

    Hi David,

    If you have a Micro SD slot, it will support the Micro SD cards.

    Thank you

  • Does it matter what brand of card Micro SD I use?

    Does it matter what brand of card Micro SD I use?

    Class 4 and class 10 will make a big difference?

    Thank you

    Anderson

    Brand? N °

    Class? Perhaps. Some people have reported problems when using class 10 cards. Others have no problems. Just to play safe given the choice, I would opt for a class 4.

  • LaserJet 1536dnf: HP LaserJet 1536 stuck in Permanent storage Init.

    Hello, tried to put in the other forum, I already found on it but could not do.

    We have the above printer.  Sometimes when you turn it on, you get nothing on the screen and the ready, alert and toner low LED, all lights.  Sometimes you turn on the printer and you get all three lights on and then Hewlett-Packard on the screen with a few arrows below it, but it never completely starts.

    I tried to remove all cables from the printer, but it does not help.  Tried to connect the power supply directly in multiple points of sale, but that did not help.  I tried a different power cable, but that did not help or the other.

    Found the instructions for a cold reboot (arrow to the right keep and Cancel button, printer and wait that Init of Permanent storage on the screen, then release), but it does not help.  Sometimes when doing this process, you get even any information on the LCD screen and you have to remove the power cord and try several times to the same it get to the point where now this key sequence actually gets the Permanent storage Init message on the screen.

    is there something I'm missing or another way to do a factory reset?  I would like to know if this is the problem with this printer or if it is simply getting old and we need to get a new one.

    Thank you!

    Any time that I've seen this is the trainer who is bad and must be replaced.  Unfortunately hp does not part.  Less expensive, I could find:

    http://www.Amazon.com/HP-LaserJet-formatter-Board-Assembly/DP/B00SBD79A2

  • HP Color LaserJet CP3505: Old Cp3505x with 68 FULL PERMANENT STORAGE

    Hi, I have an old cp3505 from a friend of mine, which shows two main problem: "permanent storage full"(event 68.8202) and 'Halftone calibration error' (event 54.0C.03, 54.0C.01, 54.0C.02, 54.0C.00, 54.0C.03, 54.0C.01). ""

    I've done a few COLD RESET, without any positive result, faded colours appear after printing.

    I wonder if the two problems are somehow...

    What should I do?

    Thank you.

    Sorry, but I may have given you wrong instructions when the memory starts to count you press and hold the arrow down and then when all 3 LEDs come on you press up and continue.  See attachment.  By the looks of your attachments, it also appears you have a bad black print cartridge, some of the colour toners are suspect.  To test go to the diagnostics menu and choose the pq troubleshooting and the printer will print a number of pages.  Use these pages to the issue or to post here for review.  Filling Uni pages are the most important.

  • HP CLJ 4600n: 68,0 Permanent storage write Fail

    I got the "68,0 permanent storage write Fail" error popping up regularly on the printer.  It can be erased by pressing the loan, but he always returns shortly after.  I did an init NVRAM, which did not fix the problem.  The printer is on a network, if that makes a difference.  Any ideas what to do, or what causes this error?  Thank you.

    You'll have to maybe replace the trainer as indicated by the '0' in error, it is onboard NVRAM having a problem and it cannot be replaced.  You could try an initialization of the disk, but I doubt it will work since it generally gives error 68.1.  Because the printer is on a network, which means that you have a network card installed, I would remove the network adapter with the power off and then do the NVRAM initialization.  After that the printer is ready to run some internal reports to see if it works well, then turn it turns off and put the NIC back in and see what happens.

  • SAS HBA or Raid for R905 for external storage?

    So I got a R905 used off ebay.  I wanted to use it for a storage server.  Unfortunately, the LSI SAS HBA or the Areca 1883 work in one of the 7 pci-e slots.  The cards are seen and their bios are launched and start automatic and other tests.  Two of them crash during initialization (it is not a matter of waiting a few minutes - in a trial, let him so all day while I was out).  I know that the slots are not dead, like the map 4-port gbe enet provided with it works great, just like a connection-x 2 infiniband card.  I confirmed that the bios and bmc firmware are the latest and best.  It's a kind of dell 'we do support the controllers dell' thing?  If so, I guess I agree with the purchase of a dell SAS HBA connector sff-8088 with random (since that's what jbod I want to connect using...)  Any thoughts appreciated...

    Hello.

    No Dell non-certified controllers are not validated to work properly on Dell servers. But this does not mean that may not work, it's a 50-50 chance. I recommend using certified Dell SAS HBA card such as: manufacturer: 7RJDT | Dell reference: 342-0910. Not so sure on the type of connector

  • BlackBerry BOLD 9650 Smartphone - CARDS MICRO SD: highest CLASS # SPEC?

    OK, I've looked. Could not find.

    PLEASE, I DON'T WANT OF ABILITY. I understand that MAX is 32 GB Micro SD for the 9650.

    What I want to know, is what is the top/most fastest Micro SD CLASS specification, supported by the 9650 currently & also if this will change with the new OS updates.

    If I understand correctly, more the class specification, faster data transfer rates, faster performance related to mobile data card power. (The material & o/s of the unit must support this level, or 'CLASS' of M - SD card to take advantage of the benefits, although).

    Basically, is the phone able to realize the benefits of performance (worth it for me to pay the extra $) of the use of CLASS 4, CLASS 6, micro SD CARD, or would it be a waste of $, given the capabilities of the phone?

    (Here I just get a CLASS 2 CARD & do with it? Faster is better & I'm willing to pay for performance, I don't want to pay unnecessarily for performances in the Micro SD that the phone cannot be used.)

    BB techies out there - please chime...

    Thank you

    -A noob-

    OK, says that I have would...

    I received my new 8 GB, class 6 MicroSD card. It's made by "TOPRAM," kind of a lesser known manufacturer - so I took a chance, but I'm glad I did. The price was less than 1/2 as major players in the business of memory, but so far, it seems that the only thing I have suffered from this decision is a somewhat heavier portfolio...

    I moved my data and installed the new card. It is not an assessment scientific with number & stats & similar, but...

    "Class 6" card is significantly faster (as the map of "class 2" he replaced "") for me the access data and transfer data functions, which, for me, enhances the user overall experience.

    Two thumbs up for (class 6) specified maps, afaic.

  • I have a problem with a card being inadmissible for the zoom on a phone.

    I have a problem with a card being inadmissible for the zoom on a phone. The Web site has been formatted for the phone using Muse. The plan should be saved in a way in Photoshop or y at - it a setting in the Muse who can fix this?

    Please provide more details, as if the card is integrated an image or a real map generated by widget.

    The generated plan must zoom in/out.

    Thank you

    Sanjit

Maybe you are looking for