formatting lost when cut and paste

Similar Questions

• keep the formula when cut and paste cells

  I have a workbook for card games where we're going to turn seats/tables throughout the day (6 moves in total).  I have reproduced the a sheet that has cells with formulas to pick up names among the other sheets in the workbook.  When I cut and paste them, for my seat of update, the formula of data changes.  IE:, journal name game 1, cell #A1 said = name cell A2 of sheet summary and so on.  When I cut and paste, it will change this formula in the correct sheet but bad cell.  Why is she even change any link to the other sheet?

  Thank you.

  It is difficult to follow what you describe here.  By workbook (not a term of numbers), it seems you're saying that worksheet. But in numbers, you can't have a sheet that contains cells. The cells are take-away in an array of numbers that is located on a sheet.  You can duplicate a table of numbers and you can also duplicate a sheet of numbers, but it is not too clear what you're doing.  How about providing a screenshot of what happens?

  SG

• Photoshop CS6: image is too large when cut and pasted on a new file window.  I'm cut a picture of 2 x 3 on a new file, and it reads like 8 x 11 or more. How

  Photoshop CS6: I cut and paste a small part (2 x 3 inches) of an image on another new file window (8 x 11).  The transferred image appears huge. If I reduce the size, the whole image and reduced background, not only the image. How can I keep the image of 2 x 3 and keep the size of the canvas of 8 x 11?

  Thank you

  The transferred image appears huge

  Caircraft are 2 x 3 image is higher resolution than your 8 x 11 file.

   
  Change the resolution of the 2 x 3 to match you res 8 x 11 before you copy it to the new file or

  Choose this layer in the copied file and then edit > transform > scale. Be sure to hold the SHIFT key while you move the handles to angle to maintain the proportion.

  If your copied file appears even more of your 8 x 11, see angle of the scale handles, press Cmd + 0 (which is zero) to display the handles

• Lost to cut and paste files

  I cut and copied some set of files of office (located in C :) to a folder in the d: drive. Another series got also copied in another location on the disk D of office. When I tried to copy the 3rd series of files, it might get copied. I cancelled the process 3 or 4 times. But nothing has managed. On the other hand, I've been facbooking on Google chrome. He got the hanged man. At the same time, windows Explorer got hanged. So I tried the Task Manager to end the task. It also did not work. Finally, I kept the CPU start button pressed and sutdowned the computer. To start the computer, I could not locate the files in the original folder or destination. I tried all sorts of recovery software to restore the file. But they could not locate the files. I thought that the files are not deleted, but their memory address is blocked, so I tried check disk (check 5 steps of readers). He repaired an area called '$J Journal USN' but still I couldnot find the files. Please help me!

  Hello

  Unfortunately, there is no other way to recover lost data. You can search for third-party software recovery that could help you.

  DISCLAIMER of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Lost tools cut and paste

  Even if I right click on the icons are not available

  Hello

  • What were the changes made before the issue started?
  • Where exactly are you facing this problem?
  • Is - this problem is confined with specific applications?

  Response with more information.

  See also:

  http://support.Microsoft.com/kb/555375

• Impossible to make the cut and paste it into all programs

  Original title: I run Vista on a Viao and lost my cut and paste ability, in all programs, in Word and Internet...  Any ideas of how I can retrieve this function?

  Any thoughts?

  Hello

  1. what exactly happens when you try to copy / paste?
  2. do you receive any error messages?
  3. did you of recent changes on your system prior to this problem?

  Method 1: I suggest to try the steps mentioned below and check if it helps to solve the problem.

  Step 1: Start the computer using safe mode with networking.

  (a) Remove all floppy disks, CDs and DVDs from your computer, and then restart your computer.
  (b) If your computer has a single operating system installed, press and hold the button F8 as your rebooting the computer.
  (c) you need to press F8 before the Windows logo appears.
  (d) if the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  (e) in the display Advanced Startup Options, use the arrow keys to select the desired mode safe mode with networking option and press enter.
  (f) log your computer with an user account with administrator rights.

  Reference: http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Check to see if the problem persists in Mode safe mode with networking. If the problem does not occur in Mode safe mode with Networking if you please try the next step.

  Step 2: Try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 3: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• Cut and paste the tables of a project to another

  When cut and paste existing tables from one project to another, the weight of the line for the cell borders appear to vary randomly - some are the original line weight and some are heavier when pasted.
  
  I tried to unravel with the properties of the table, but without result dialog.
  
  Is there a quick fix or I'm better import in all subjects, then changing any theme?

  Hi Colum/Peter,

  It is not a custom table, I just need to copy a table from one project to the other.

  Blasted my developers (may the fleas of a thousand camels, etc), recently decided to change toolbars in one of our applications. As this toolbar appears in slightly different forms in about 6 tabs, I tried to update the table that shows which icon does what and cut and paste this table in all subprojects that I. Each table then needs only a minor modification for some this subproject-specific icons.

  Peter on the right track. When I cut and glued to the table, it is also stuck in a number of lines of HTML associated with styles in the other project. If I delete these lines, the table will appear as it should.

  Thanks for the quick reply

• Images lost during operations cut-and - paste from memory card on my computer

  I was moving pictures on my memory card in a folder in "my pictures" using the cut and paste.
  on my memory card and when I plugged my camera into my computer, the photos were in different files as the memory card has been put in two cameras; a samsung and a cannon. Some of the pictures so share the same name of the image.
  When I cut and pasted the warning came to say something in the sense of 'element already exists, replace the existing file' I clicked on "Yes to all" without thinking about it, and now I've lost the almost all of a folder of photos! And because they were cut out of the memory of the device, I can't think of a way to get back them.
  I tried many searches in my files to try and find / recover, but I have no idea where they would have gone!
  They are pictures of vacation and I really want to try to recover, any help would be greatly appreciated!

  The following freeware may be able to recover files
  your memory card.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Recuva - file recovery - features
  http://www.Piriform.com/Recuva/features

  Download Recuva
  http://www.Piriform.com/Recuva/download/standard

  Introduction of Recuva (tutorials)
  http://www.Piriform.com/docs/Recuva/introducing-Recuva

  Good luck...

• I cut and pasted a document in Microsoft Works in another place, when I tried to cut and paste again in Microsoft Works, disappeared from my document

  I cut and pasted a Microsoft Word document into another area online editing; When I tried to cut and paste into a Word document, it has been lost!

  I need help to find this document in my computer.

  Open office word go to the section of the Home tab, on the left side is the clip on the same line and on the right panel is a small symbol, click on this symbol to the left and the clip Panel opens with a copied text, you did,

  If you did not start or let your computer hibernate it can always be included in this area, it is capable of holding 20 or copied so many things at once, but not permanently.

  If this isn't the case click the list options and consider options for the clip board in the future.

• When I cut and paste a subfolder of an excel file, the files in the subfolder are missing

  When I cut and paste a subfolder (which contains the files) to an excel file, the files in the subfolder disappeared. I didn't then properties and wer there are no previous versions of the files. Also note, glued folders are there but not files

  What version of Excel you use (Excel 2003, Excel 2007 or Excel 2010)?

  This problem occurs with a specific folder?

  Is the Excel file that is saved on a network or on the local computer?

  Check if the files are hidden, for any information to show all hidden files, you can check the link below:

  http://Office.Microsoft.com/en-us/Excel-Help/view-all-hidden-file-types-and-file-name-extensions-HP005195524.aspx

  Excel application doesn't have any role in cut\paste of files even if the files contain Excel documents.

• When I send emails to others after cut and pasting of information, it runs off the page and is not readable on their computers.

  If I cut and paste a message to a person in a Hotmail e-mail message, more often it runs off the page on other machines and they can't read.  How to fix this?

  Hi Joanne,

  The question you have posted is related to Windows Live Mail and would be better suited to the Discussion Windows Live groups. Please visit the link below to find a community that will provide the support you want.

  Windows Live Forum: http://windowslivehelp.com/product.aspx?ProductID=1

• How to cut and paste the image of the body of the received email

  I'm trying to cut and paste an image included in the bottom of an email and insert it into a Word document so that you can size and print. I can highlight, cut it with Ctrl C, paste it into the document Word with Ctrl V, but the image doesn't show, although the picture frame appears when I click on the place where the photo was pasted. Framework, but empty, no image. Any thoughts?

  Thanks to everyone for their help.

  The problem has been resolved - to try and finally understand everything.

  If you encounter this problem, it is perhaps because, unless you know the file format of the inserted picture, programs can not figure it out for you. Place your cursor on the image, right click and save the image under a .jpeg instead of simply copying. Then work with the file .jpeg in any photo management program you use normally - or even insert it in Word.

• Cut and paste in Indesign style names

  Hello everyone, I'm new to this forum.

  I have a question about the cut and paste in Indesign: Let's say I have two documents.

  -In the first, I have several rules of paragraph style, let's say style1, style2, style3.

  -In the second document, I have exactly the same paragraph style (style1, style2, style3) names, but different formatting rules (for example in doc1 style1 is 13 times, the same style1 doc2 is Minion 11).

  What I want to do is to copy the text of document 1, the selected paragraph style name, but not the setting shaped styles. So when I did the copied text in document 2, can I get the text automatically style with rules of formatting of document 2.

  I can't find a way to do it: I cut & spent keeping the formatting, but not the names of the styles only.

  Did someone in the face of this problem or have a solution?

  Thanks in advance for your help.

  Hi everyone and thanks for your help.

  I finally found out why the cut & paste has not worked for me.

  The problem was that in doc1, I put all my styles in a folder, while in doc2 (take a guess!) No.

  That was the problem. Once I put in a folder with the same name as doc1 doc2 styles, everything worked magically.

  Thank you very much!

  Fabio

• Dreamweaver - cut and paste text of strange characters appear

  Just started using Adobe Dreamweaver.   When I cut and paste Google adsense of Google Chrome ad codes in Dreamweaver, the "citations" are transformed into: & gt;

  How can I fix it?

  Here's a sample:

  copied text:

  "< script async src="//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js "> < / script >

  <! - ProPrankster.com - >

  < ins class = "adsbygoogle".

  style = "display: block".

  customer-ad-data = "ca-pub-4378258341244254.

  data-ad-slot = "2469206513."

  data-ad-format = 'auto' > < / ins >

  < script >

  (adsbygoogle = window.adsbygoogle | .push ({}) [of]);

  < /script >

  Copied text will look like this when pasted into Dreamweaver:

  & lt; script src async = & quot;//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js & quot; & gt; & lt; / script & g t; < br >

  & lt;! -ProPrankster.com - & gt; < br >

  & lt; ins class = & quot; adsbygoogle & quot; < br >

  style = & quot; display: block & quot; < br >

  data-customer-ad = & quot; CA-pub-4378258341244254 & quot; < br >

  data-ad-slot = & quot; 2469206513 & quot; < br >

  advertising-format data = & quot; Auto & quot; & gt; & lt; / ins & gt; < br >

  & lt; script & gt; < br >

  (adsbygoogle = window.adsbygoogle |) []) .push ({}); < br >

  & lt; / script & gt;

  It would be the outcome if you paste your code in anything other than the display of Code (Design or Live).

  Can you confirm where in DW you paste the code?

• Cut and paste tabs and "returns"?

  Hello

  In an earlier version of pages, I could copy and paste tabs, as well as breaks line or "go back". I use this feature a lot then the processor who ends up going inside a spreadsheet and visca versca.

  In the most recent version of Pages, I think that cutting and pasting of the tabs is available in all simply copy the tab character and paste it into the Find/Replace dialog box. (And a shortcut of 'Option-tab' inserts a "tab" character in the Find/Replace dialog box.)

  But cut and paste newlines or line returns no longer seem to work (or fact is old keyboard shortcut 'Option-return'.  This feature has gone completely outside, or modified or?

  Anyone know?

  Thank you!

  Rick

  Just tested the latest version of the Pages.

  Option-tab peut be used in the dialog box search to search for a TAB

  I can select a tab in the text and paste it into the search box and it is as expected

  Shift + return produced a line break, and this also can be copied and pasted into the Find dialog box

  I can't locate 'Find & Replace"of carriage return anyway, page break, column etc. break section break that had Pages 09... most have disappeared when Apple introduced 5 Pages.