former program labview 5.0 to 8.6

Similar Questions

• How to debug the program Labview that runs in the target of the RT of a Compact RIO

  I use CRIO-9073 for the acquisition of data from sensors. Program Labview is written in RT target and target FPGA. It is posssible to make step wise execution for the program written in the target RT and FPGA target the way purpose us for the debugging of the program in general OS.

  MJM,

  The only way to use the debugging on a VI wrote to FPGA tools is to simulate running on the host computer. You can then deploy the compiled FPGA code on the target and run your VI RT in debug mode if you use the communication of the façade with the host PC.

• SEO Oracle Forms program units from a library

  Hello
  IM using Oracle Forms 10.1.2.0.2. I stated a procedure in several forms that runs a query and then enables or disables certain elements according to the number of occurrences of the query. The procedure is always the same and it is something like this:
  
  PROCEDURE QUERY (prBlock IN VARCHAR2, prQuery IN VARCHAR2) IS
  BEGIN
  
  SET_BLOCK_PROPERTY (prBlock, ONETIME_WHERE, prQuery);
  GO_BLOCK (prBlock);
  EXECUTE_QUERY();
  
  ENABLE_ITEMS (GET_BLOCK_PROPERTY (prBlock, QUERY_HITS) > 0, prBlock);
  REQUEST TO END;
  
  Problem is that I want to add this procedure in a library, but I can't find a way to call ENABLE_ITEMS so that each shape activates / deactivates their items appropriate. Is it possible to call a procedure declared in a unit of program forms in a library?
  
  Thank you.

  Try this

  create an ENABLE_ITEMS() with the same parameters of the library, your code can be

  Start
  null;
  end;
  the procedure should be exactly in the parameters and types that each of them to each shape

  you compile the library
  then attach to the form

  When the library call a procedure forms program units have preference and turn the shape program unit and the ENABLE_ITEMS() of the library is never called

• Program LabVIEW will hang between 33% and 50% of the time.

  I have a problem with a Labview program, I did. I have two programs that do the same thing. One is as a flat sequence, and the other is in the form of State machine.

  As explained in the link below, I would like to use a microcontroller to perform wiring for automation of a measurement process. A separate current source and volt meter will be used.

  https://forums.NI.com/T5/LabVIEW/sequence-a-good-idea/TD-p/2601333

  I did some simple test programs that I join since then. The problem is when running, that the labview program crashes, but not all the time is to run the program.

  For example: Hall 1.2.vi will correctly work twice with the third time, he is executed, it crashes. If Cancel you and try again, it will run again twice without any problem with the third hanging. It is in the flat sequence format (was in a flat sequence, but merged windows because I thought that was the cause). From what I can tell, the program crashes when calling Keithley 6517 unique Read.vi. Two connected Keithley devices are connected to the computer via GPIB to 16 and 27. The way I checked if it was this vi the cause or contributed to what I deleted the program never hung and it. I find it very strange that it crashes exactly on the third attempt every time.

  Simple.VI Hall 1.3 will work the first time and hang the second time. If it works 50% of the time. It is in the format of State Machine. It hangs in the case entitled "Measurement 1" that contains the Keithley 6517 unique Read.vi.

  I used the running highlight button and watched the program to run. Curiously, it only crashes when you use this button. So I tried to add some delays/waiting in different places without success.

  This could be the cause? As a side note, I say that the program is suspended for two reasons. The principal is the program does not run so the execution arrow is always black. The second thing is that if you notice at the end of the labview program, I have a block he who turns to the power source which does not happen when it crashes. I have to turn it off manually, and then click the abort program button to stop labview.

  
  

• How to send a nxt program labview in the mindstorm block

  Hello

  I would like to know how to send a writing of nxt program on labview in the mindstorm block for not using usb and bluetooth connection

  In order to start a program directly with the block

  Thanks for your your answer attentionand

  Hello

  National Instruments does not directly support the LEGO Mindstorms Nxt please refer to this KB see were you can ask for help.

• programming LabVIEW 2010 how to scxi 1102 and 1503 cascade in scxi 1101 case

  How to scxi 1102 and 1503 cascading if 1101 scxi for labview 2010 programming

  

  just test ok
  
  LabVIEW 2010 latest

• Download program labview on several robots

  Hello

  I'm new to LabVIEW and robotics kit. My question is how to download a simple example (avoidance of obstacles) on several robots at the same time. I am able to download separately one by one and it is caught in time. Is there a way in such a way that all the robots with ethernet cables are connected to the switch and controlled at the same time and each of them while giving the ip address or the name of the program?

  Thank you

  Goutham

  Great news.  In fact, we have a range of Configuration software in real-time in LabVIEW which can copy the image to a target and then apply this image to other targets.

  You can find the palette able IO > System Configuration

  What you have to do is copy the image, and then you can download the image to your robots.

  This option, or one of the other two should do the job.

  Finally, remember that if two starter kit robots are pointing towards each other, the sonar sensors will interfere with each other.  If you use the stock starter kit, you can run difficulties running several robots using both the sonar sensor if they will compete.

• Reads OCR training character, but not the program labview

  I am training characters, then check my program is able to read the same characters. Every article I read has 8 of the same characters in different parts of the King. Because it is a curved surface, each position is formed independently. 3 the posistions, I formed the character '5' and it will recognize without any problem in the roc training program. Using the exact same ROI, it will not read the characters in my program. All settings, IE the resolution read, read strategy, erosions, etc. are the same in both programs. It notes the character, don't know what it is. I use non-linear threshold. Indicator report of character, I took the threshold values, it uses in my program and is entered as a range threshold fixed on the formation of ocr. This turned the blue character just as expected and read without any problem. Unless there is a setting I'm missing, it seems that the OCR Application does not use the text for reading OCR Idem 3 I use in my program. Any suggestions? I know it's complicated, I'll add the image and a screenshot showing what I mean

  I fixed it! I became crazy and set all the properties of ocr, even those I was using just the default setting. Weird.

• How do program labview to get an average of 200 meter reading (using loop)

  Hello

  How the labview program to obtain a value average 200 reading of the multimeter (I-help using the loop) to read the voltage level of mulmeter, but I want to get an average value of all of the 200 reding how can I do?

  Thank you

  Wee

  Thanks for the pointer to James, but I think that I misunderstood.

  I enclose an excerpt from the details I have never described the use of a table.

  

• Help program LabVIEW

  Hi all

  I am facing problems with the project I'm doing with my traditions. The project I'm doing is a lot like a game with two generators and two people will have to compete and see which generates more. It must have the following functions:

  -Display the current values measured by sensors in current of 2 respective generators.

  -Have an array of waveform that is capable of displaying the current measured values.

  -Have some sort of 'sliding bar' system that increases as the amount produced since generators increases.

  -Have a scoring system for the people of ten albums that generates the most.

  I know I already asked questions on the subject of some of the functions above, but attached is my vi together that our group has managed to date. I would appreciate if someone can point out our mistakes that we made, improvements we can make to improve our project.

  The problems that we have so far:

  -Cannot write the measured values for the file using "write to the spreadsheet" excel (not sure if we have problems in our program that will lead to this)

  -We currently use several LEDs to the 'sliding bar' (we do it wrong?)

  
  

• programming LabVIEW for nor 5122

  Hello, I just started working on a pxi system. I was wondering if anyone has useful resources for writing code for NOR-5122 (high speed scanning) and NOR-5421 (AWG). I've never programmed for pxi and while I looked at the examples in the examples to find section, I still can't understand things. Does anyone know of the tutorials or books or a reference to help me get a better understanding of how to program and eventually being able to create complex programs. Thank you. I really need to learn to program and your help would be very appreciated.

  Hi Boss,

  NI Signal generators help and digitizers AND high-speed main resources are available to work with these devices.  Under the subdivision of the programming of each help file, you will find a road section which includes a tutorial for the installation step by step of a pilot session.  In addition, you will find a reference section that describes each VI driver in detail.

  If you are not able to get a specific part of your application to function properly after reviewing these sources, you can certainly ask for help on the specific issue forums.

  Brian G

• Integrate USB DAQ 6008 program Labview

  I'm new to LabVIEW and am currently writing a vi to access the 6008. I'm using LabVIEW 2012. I installed the driver NOR-DAQmx 3.6, however, the sample code is code c - no vi. Also, I can't see examples of NOR-DAQmx in the finder of the example. I downloaded various examples, but each are missing Subvi which I believe should be installed with the driver. All advice is appreciated.

  Harry,

  1 DAQmx Base is only supported on Mac OS.  You can find petitions on the exchange of idea ask for better support.

  2 DAQmx and all its beautiful examples are not installed on the Mac.  This means that the measurement and Automation Explorer (MAX) is not installed on the Mac and things such as the DAQ Assistant exist (although it is not a great loss).

  3. when DAQmx Base is installed on Mac OS X with LV 2012 you should have the DAQmx Base screws accessible from the measures of e/s palette.

  4 installation DAQmx Base includes a bunch of examples in this direction: Applications: National Instruments: LabVIEW 2012: examples: daqmxbase: However, the example Finder doesn't seem to know they are there, then you will need to manually search.

  One good thing about DAQmx Base is that it is almost entirely written in LabVIEW, so you can see what he does.

  Once you get past the obstacles, the USB-6008 case works well with DAQmx Base and the Mac.

  Lynn

• How do I program labview to read a full bridge strain gauge placed at an angle of 45 degrees to measure the torsional deformation?

  Hello

  Currently, I'm trying to convert the reading of the strain gauge allows to get readings of the strain of a game of strain gauges of configuration of full-bridge at an angle of 45 degrees on a hollow cyllinder. It is set at 45 degrees, because we are trying to get traction and compression strains resulting from the application of the twist, or a moment of torsion, to the cyllinder hollow. Finally, we want to convert these readings of strain in order to get the couple. Our problem is that full-bridge options to convert the strain gauges appear only apply to configurations 0 or 90 degrees. My question is how can I take my current VI and set it to take readings of the strain of an alignment of 45 degrees. Also suggestions on how to add couple of this VI measures would be appreciated. We have scoured the site, but we are very new to Labview.

  Thank you!

  

  This is not a very good example, they show.  Full-bridge 1 will also read the constraint of torsion.  Full-bridge 1 is for any configuration where you get 2 gauges of tensile and compression 2 meters and you expect roughly equal magnitudes.  With a twisting bridge, the only thing you need to do is to make sure that the wiring and pay attention to the numbering of gage.  Think just mentally on what measurers are in tension and in compression as you twist the stem or tube.

  If you're wrong, you pretty much know immediately because you will see very little change in the output when you go to the torsion of the shaft because the templates of traction and compression will liquidate cancel each other in the bridge rather than expand their effects.  To fix it, all you will need to exchange a few threads to effectively rewire the bridge correctly.

  Good luck in your project.

• Virtual PC 2007, former program back (PSPICE), Hardware Lock

  When I bought my new PC with Vista Business 64 bit (SP2, now), I didn't know that I could not run my old program back (PSPICE). Replacement cost of the software is $ 5000. I would like to find a way to run this software on this machine (I keep my old XP 32-bit, SP3 machine alive do turn this software). I tried DOSbox, but it doesn't seem to be able to read the material lock (connected to the serial port). So I was wondering if this Virtual PC 2007 might work. I wanted to just ask you the question before going through the installation process. Thank you

  You could try Disk2VHD (http://technet.microsoft.com/en-us/sysinternals/ee656415.aspx)...  With it, you can clone your XP machine in a virtual machine, and then boot from your Vista machine to the clone.  I don't know if he's going to read the serial port.  You also need to activate the clone.
   
  Alternatively, you can ask here (http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/threads), which has all the VPC experts there.
   
  Steve
   
  "Oldsheppard" wrote in message News: b0e37509-ff1c-44a4-a2e3-6657bc27aa6a...

  When I bought my new PC with Vista Business 64 bit (SP2, now), I didn't know that I could not run my old program back (PSPICE). Replacement cost of the software is $ 5000. I would like to find a way to run this software on this machine (I keep my old XP 32-bit, SP3 machine alive do turn this software). I tried DOSbox, but it doesn't seem to be able to read the material lock (connected to the serial port). So I was wondering if this Virtual PC 2007 might work. I wanted to just ask you the question before going through the installation process. Thank you

• Former program is not Compatible with Windows 7

  I have windows 7 on my computer, but want to use a CD with system requirements of:

  486 or higher; 8 MB OF RAM

  at least Windows 3.1, 95/98, NT

  at least a 33 MHz processor

  2 X CD-ROM drive or even faster watch display 640 X 480 pixels and 256 colors

  This program does not open upward, I get message that my version of windows is not compatible.

  What can I do to open this program.  I think I have great and fast enough processor.

  This is an installer for an old CD player is not working?

  It is perhaps that there is no W7 drivers for it to install or run (esp if you use W7 64 bit and the road goes up to 32-bit days).

  If the above assumption is correct, what is the real brand and model of the drive? Using 32 or 64 bit W7?

  Armed with the above, have a look at drivers for it manufacturing and site of CD players for their latest software supported. Maybe it's that they do not support W7 at all if its an old drive.

  According to what is in fact the program, pouvez be able to run it in compatibility mode - http://windows.microsoft.com/en-us/windows/make-older-programs-run#1TC=windows-7 which can sometimes have some success.