Formula simple subtraction doesn't work is not for me. Please help :(

Similar Questions

• Touchscreen doesn't work is not for the Satellite U920t - 10 p

  Please read this completely before you answer with your copied and pasted answers.

  My touch screen lets you stop work, but was still attached with a reboot of the machine.
  Now it doesn't work at all and * I've tried everything posted elsewhere in this forum *.

  I tried to change the settings for battery power, try to update the drivers (not exactly who is right though!).

  Please can anyone help because it is a new machine and it's very frustrating.

  Serial number: 7D054633H
  Model: Toshiba Satellite U920t - PSUL1E-01900JEN 10 p

  Thanks in advance.

  > Please read this completely before you answer with your copied and pasted answers.
  IMHO, I n t think that someone here in the forum doesn t read the messages before playback
  I hope that this part of your post is just the result of frustration due to the malfunction of the notebook...

  Back to your question:
  > I tried everything already posted elsewhere in this forum.
  and what does this mean? What have you tried exactly?
  Have you given zero and plant control panel?

  If not try and in the case where this help not the laptop's hardware could be affected which requires new checks of material by an authorized

• WiFi doesn't work is not for the Satellite A215-S7437

  I just reinstalled windows 7 thin on my Toshiba Satellite A215-S7437 computer laptop PSAFGU - 00L 002 and the wifi does not work.

  I tried a bunch of drivers on your website and they either do not work or are not compatible.

  I even tried engineering driver to install a driver flash as you guys suggested someone else on these forums and.

  Please help as I am in desperate need of wifi on my laptop.

  Hello

  According to the data sheet for laptop, the Satellite A215-S7437 supports Realtek 802. 11b / g wireless LAN

  Please visit this page to get the WLan drivers:
  http://APS2.toshiba-tro.de/WLAN/

  You will find different Realtek Wlan drivers.
  I have not quite what Realtek chip you have exactly, but this isn't a big problem to discover this m.

  Check in the Device Manager: it is useful HowTO
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

• Start/stop button doesn't work is not on Windows 7-HELP - GOING CRAZY!

  Please help if you can. I'm going crazy trying to solve this problem.

  Recently, I made some recommended system updates. Part of the update requires that you restart the computer after the updates. My laptop will not allow absolutely not me to put back in operation or stop my system... only put into hibernation.

  I have done research on corrections and tried several unsuccessful. My last hope was to run the "clean boot" for windows 7, I did, but in the end when it should have restarted I got an error box that says "the System Configuration cannot restart the computer.

  What can I do? I think that my system does not work properly because it has not been restarted because all updates have been loaded. Is there a solution?

  Thanks in advance!

  Hi Kristi,

  Have you tried to do a hard shutdown and restart the computer?

  If you have not done a hard reboot by manually turning off the power button on CPU, I suggest you to try and see if the problem still occurs.

  If you still experience the problem, then follow these methods:

  Method 1:

  Check out the link and run the Troubleshooter:

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2:

  If the problem is not resolved, I suggest you refer to the article and change what happens when you press the power button on your computer:

  http://Windows.Microsoft.com/en-in/Windows7/change-what-happens-when-you-press-the-power-button-on-your-computer

  Let us know the results.

• G3 250: kye f2 f3 doesn't work is not for the brightness adjustment

  RES / sir

  I have laptop HP 250 g3 on the frist day feature kye f2 and f3 does not since I purchesed help me please how to update the driver for the brightness adjustment

  Hello:

  Your laptop is not supported for Windows 8.

  'Re missing you the graphics driver.

  If your model has a Core of 4th generation, try this driver.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24348

• New hard drive doesn't work is not for me

  I have to delete and automatically add the existing disks to virtual machines. The removal works, but for some reason, I can't New-hard drive to work. Here is how I call it and the result:

  > $drVm

  Name PowerState Num CPU memory (MB)
  ----                 ---------- -------- -----------
  Test-VM 1 2048 PoweredOff

  
  

  > $drPath

  [ds_name]  VM-name/VM - Name.vmdk

  
  

  > New-disk-hard - VM $drVM - DiskPath $drPath

  New-HDD: 15/05/2012 11:10:33 New-disk hard no. datastore corresponding found.
  On line: 1 char: 13
  + New hard drive < < < < - VM $drVm - DiskPath $drPath
  + CategoryInfo: ObjectNotFound: (:)) [new-harddisk], VimException)
  + FullyQualifiedErrorId: Client20_VirtualDeviceServiceImpl_NewVirtualHardDisk_DatastoreNotFound, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDev
  ice. NewHardDisk

  
  

  > Get-Datastore-name "ds_name.

  Name FreeSpaceMB CapacityMB
  ----                               -----------      ----------
  16335 16384 ds_name

  Values and types appear to be correct, but it does not work. At one point, I had this working but then stopped. I had recently upgraded to v5 PowerCLI so I supported that, but it still does not work.

  I am passing the VM as a virtual machine type and the path of the disk as a string by the docs.

  Any help would be appreciated. Especially if I'm doing something stupid. It is such a simple function.

  I thought as well

  The virtual machine can be a VM object or even a string with the name of the virtual machine. The functionality of the object by name (NVOS) will ensure that the hard drive New cmdlet retrieves the virtual computer object. And Yes, the path is a string.

  If you assign the hard drive manually, then do a Get-hard drive, you see the same way that you use in your script?

• Tecra M11 - T.BIOS'CEO update doesn't work is not for 3.20.0.0

  I am currently on BIOS version 2.90. EC version 1.90.
  I downloaded the package to update the BIOS to 3.20.0.0
  However, when I try to update I get the following error message...

  Error: Preparation of updated failed.
  You have not given permission to run the update.

  I am the administrator. I am running WIndows 7 Professional 64 bit.
  Model M11SAU1.

  I'm upgrade is because I hope that this will solve my problem of wireless USB headset. I have a plantronics. Audio 995 wireless headset with USB dongle that simply will not be installed by using standard windows drivers who told me that the manufacturer should work. This unit works very well on my other machine Win 7 64. Ironically, it also fits great under VMware with XP on my toshiba... but refuses to install natively?

  Answers to one of these popular questions ;-)

  > I'm upgraded is because I hope that this will solve my problem of wireless USB headset. I have a plantronics. Audio 995 wireless headset with USB dongle that simply will not be installed by using standard windows drivers who told me that the manufacturer should work.

  In my opinion, this has nothing to do with the BIOS and don't think that BIOS update is a solution for this...
  However, have you intsaller the VAP (value added package) for this model of laptop computer?

  As far as I know that this is necessary in order to update the BIOS!

  Also, make sure you have disabled any software Antivirus and other security software and options!

• USB port on cinema display doesn't work is not for the keyboard

  It works with other devices. But not with my (Apple) keyboard. Is there a way to "wake up." He worked as recently as today. Woke up from his sleep and... nada.

  Thanks in advance.

  It is just woke up. Tried another keyboard in the port. It worked. Then tried one. It works now. Gremlins.

  This publication is no longer "never mind."

• FN + F8 doesn't work is not for the Satellite L650

  I just reinstall the system to windows 7 ultimate 64 bit and already install the wlan driver and package.

  "In the Device Manager,"broadcom network adapter wlan"card works very well, but he can't find any available wireless network since ' fn + f8" is missing or does not.

  Someone at - not how to solve this problem?

  Hello

  Other FN keys work correctly?
  As far as I know that you will install VAP and Support of Flash Card Utility to get the FN keys to work!
  Please check this!

  In addition, the WLan driver must be installed in order to get the FN + F8 key combination.
  Usually, that's all you need

• Enter key doesn't work is not for the pop-up screen

  Hello

  I am facing a problem in trying to close the context menu in my application. The enter (return) key does not work on my popup screen. I can close the popup with button screen central trackball or with the pointer of the mouse (in Simulator 9800). I want to close the same screen by using the Enter key. I develop application for Blackberry 9800 with OS 6.0 and also the part of the code I am using is as

  PopupScreen messageScreen = new PopupScreen(new VerticalFieldManager(VerticalFieldManager.VERTICAL_SCROLL)); messageField=new BasicEditField("Message:","Abc",20,Field.READONLY);
  closeButton=new ButtonField("Close", Field.USE_ALL_WIDTH){
    protected boolean navigationClick(int status, int time) {
      getScreen().deleteRange(0, getScreen().getFieldCount()-1);
      UiApplication.getUiApplication().popScreen(getScreen());                return true;
    }
  };messageScreen.add(messageField);
  messageScreen.add(closeButton);
  UiApplication.getUiApplication().pushScreen(messageScreen);
  

  Someone help me please on this issue.

  Thanks in advance

  Hi paabs,

  Here's what you need to do:

  1. create a function for each of your buttons. For example: okClicked() & cancelClicked().

  2. replace keyDown and check if the key pressed is the Enter key. If so, check the field with the focus and activate the correct function.

  3 replace the method "navigationClick. Locate the field with the update and select the correct function.

  E.

• OracleTextSearch doesn't work is not for the CSV file

  Hi all

  I use Oracle Webcenter content with Version: 11.1.1.9.0 - 2015-04-14 07:19:29Z - r126792 (Build: 7.3.5.185).

  I configured using OracleTextSearch below of setting in the config.cfg file

  SearchIndexerEngineName = OracleTextSearch

  I can search text for the file types such as text, excel, docx, pdf, but I'm not able to do text search the csv file.

  Please suggest any alternative to enable text search the csv file.

  Please find the below the example of csv file.

  "Id","CurrencyIsoCode","City","Status"
  "1","GBP","","Activated"
  "2","GBP","Reading","Expired"
  "3","GBP","Reading","Expired"
  "4","GBP","Brighton","Activated"
  "5","USD",""Atlanta"""","" Georgia""","Expired"
  "6","GBP","Reading","Expired"
  "7","GBP","Bristol","Activated"
  "8","GBP","Chicago","Expired"
  "9","GBP","Chicago","Expired"
  "10","GBP","Chicago","Expired"
  "11","GBP","Chicago","Expired"
  "12","GBP","Reading","Activated"
  "13","GBP","London","Activated"
  "14","GBP","Reading","Expired"
  "15","GBP","Singapore 068893","Activated"
  "16","USD","Overland Park","Activated"
  "17","GBP","London","Activated"
  "18","GBP","Hangzhou","Activated"
  "19","GBP","Southampton","Activated"
  

  Do something:

  Edit config.cfg and add below variable:

  TextIndexerFilterFormats = csv

  After that, save and exit. Restart the server.

  Checking in a new file csv and do a word search.

  It should work let me know again, you have a question or not

• Boolean converter doesn't work is not for the string data type

  Hi gurus,

  I am creating a Boolean converter based on the O/N value for column EO, but every time I select the checkbox that's throwing error "attribute with the value false precision/scale not valid."

  If I add PrecisionRule = 'false' for TestFlag to the EO, I had ORA-12899: value too large for column 'XX '. "" "" FDY_TEST '. "" TEST_FLAG' (real:, maximum of 5: 1).

  Seems that it is still store 'true' / 'false' char to instead "Y/N", even if the POS in the converter class return System.out.println ("getAsObject - value is Y")

  If I use the transitional attribute (TestFlagDummy) and change the EOImpl to TestFlagDummy getter and setter, it works very well.

  I was wondering why the converted does not, in which case the other converter for string I test to convert the value entered for upper case works very well.

  Appreciate any help.

  Definition EO

  ------------------

  < attribute

  Name = "TestFlag.

  Precision = '1 '.

  ColumnName = "TEST_FLAG."

  SQLType = 'VARCHAR '.

  Type = "Java.lang.String"

  ColumnType = "VARCHAR2".

  TableName = "FDY_TEST" >

  < DesignTime >

  < name Attr = "_DisplaySize" Value = "1" / >

  < / DesignTime >

  < / attribute >

  Converter class

  -----------------------

  public class YNConverter

  implements the converter, ClientConverter

  {

  public Object getAsObject (FacesContext facesContext, UIComponent uiComponent, String value)

  {

  If (true".equals (value)) {" "}

  System.out.println ("getAsObject - value is Y");

  }

  else {}

  System.out.println ("getAsObject - value is N");

  }

  return "" true ".equals (value)?". Y":"N";

  }

  public String getAsString (FacesContext facesContext, UIComponent uiComponent, Object value)

  {

  System.out.println ("getAsString - Value is" + value.toString ());

  Return "Y".equals (value.toString ())? "true": "false";

  }

  public String getClientLibrarySource (FacesContext facesContext)

  {

  Returns a null value.

  }

  public Collection < String > getClientImportNames()

  {

  Return Collections.emptySet ();

  }

  public String getClientScript (FacesContext facesContext, UIComponent uiComponent)

  {

  Returns a null value.

  }

  public String getClientConversion (FacesContext facesContext, UIComponent uiComponent)

  {

  Returns a null value.

  }

  }

  USER INTERFACE

  ---

  < af:selectBooleanCheckbox

  label = "#{bindings." TestFlag.label}"id ="sbc1.

  value = "#{bindings." TestFlag.inputValue}.

  Converter = autoSubmit "YNConverter" = "true" / >

  Kind regards

  Ferrere

  Your link should look like this:

  VO attribute similar to the following:

  and EO attribute similar to the following:

  Dario

• Apply the following Style doesn't work is not for me. apply the bad style

  I have two set up paragraph styles: 'Head 1 with the rule' and "head 3". Both work very well on their own. I want to use the following Style to apply "Head 3" automatically after that I use 'Head 1 with the rule' and press return. That's a title and subtitle in a society newsletter. The Setup looks right to me.

  

  

  Yet when I try, "Head 3" does not follow after "Head 1 with the rule. Instead, I get my paragraph style "body text".

  

  Help appreciated. Thank you.

  You have an empty return once the head 1, if you select the return that he decorated with Head3?

• Save doesn't work is not for the actions of scrolling

  In check-in demo mode, scrolling actions do not register properly... I created demos how to find information on our Intranet. For example, I scroll down to a specific menu item and click the item.
  
  I replay the recording and the works of scrolling, but then it goes back to the position of the screen before the scrolling action and highlight box and position of the mouse to the button so I had to click on is invalid.
  
  It did not Captivate 2... Maybe I need to adjust the settings? I tried to enter manually the print screen (PrtSc) after the scrolling action, but it does not work.

  I'm having the same problem. I also have posted about this, but received no response.

  I do a manual page when I'm done to scroll or do a drag / move. I copy the background of the manual screenshot, then paste it as a the incorrect slide background. It's annoying, but I've done half my demos in 2 and half in 3, so I'm stuck with 3.

• "Dual monitor Expand" doesn't work is not for t5740 with WES 2009.

  We do the following procedure to configure all our years TC bi-ecrans.

  1. flash the tC, customize it to our needs.

  2 join to the domain

  3. log in with Admin Creds, change default display settings: display properties-> settings tab-> "extend my desktop windows on the second monitor"-> apply

  4 validation EWF, logoff

  5. now, Login as any domain user for the workstation mode extended.
  works great for t5630 (xpe sp3) & t5630w (WES 2009) & t5740 XPF 2002
  

  BUT it fails with t5740 with WES 2009
  

  the above parameters are only to the Admin account, any other user domain/local get one active monitor.
  

  can write us any script/group policy settings to do
  

  Could someone help me solve this problem.
  

  Thanks in advance
  

  found an easy way without multi-display software

  Requirements: HPDM AGENT installed on TC

  c:\windows\xpeagent\hpdmAgent.exe

  c:\windows\xpeagent\hpdmmc.exe the set display = rate of 1280 * 1024 = 60 depth = 32 sm = primary r = pm

  put the following two lines of code in a file bat in logon scripts

  source: found this in the task log hpdm "display" - file and registry settings