FORUM problem: my profile: location

Similar Questions

• Problem of GPS location after updating to IOS 10

  Anyone have problems with GPS location problem after update from IOS10?

  I drove Baltimore DC Regan airport, I tried with apple and Google map yesterday map, location was far from the highway, he could not determine where we are, we were on the road, but he kept us showing that we were on a local road to the highway.  Could not find 90% of time on my road.  Finally, I have to use my phone to brother with IOS9, we were fortunate that it has not updated to the most recent IOS 10.

  I wonder if anyone has the same problem after the update.

  Hello yinchiu85,

  I understand that your iPhone seems to have a hard time determining its location precisely. Fortunately, there are a number of steps you can take to help improve the accuracy of the information.
  

  Improve the accuracy of GPS

  GPS accuracy depends on the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. To improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
  • Keep a clear vision in several directions. Walls, vehicle roofs, buildings of great height, mountains and other obstacles can block the line of sight to GPS satellites. In this case, your device uses Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  If your iPhone is still unable to pinpoint your position, the next step would be to restore location Services.
  

  If you want to reset all settings to factory default location, go to settings > general > reset and tap reset card and privacy. When your location and privacy settings are reset, apps will be stop using your location until you grant them permission.

  On privacy and location in iOS Services 8 and later versions
  https://support.Apple.com/en-us/HT203033

• Problems with profile

  Hi all

  I had a Dell account/profile for quite a few years. I was also active in the forums on and outside.

  My problem is a few weeks ago, I could see is no longer 'Profile, Messages, settings, Sign Out or places where I prefer' after cutting in the forums, I am also unable to do all of the positions. I contacted Dell via facebook and advised to clear the browser cache, and then try again. No joy.

  In my view, there must be something related to my profile, because I tried

  • Firefox
  • Microsoft edge
  • Chrome

  and all these browsers on computers at home, at work and on my shelf so EVERYONE with the same questions.

  I created a new profile I have post this and everything works well so far, but I have none of my purchases or messages related to the following...

  Is it possible to transfer my 'Old' profile to it?

  Hi gibbylinks01,

  Thank you for posting and this bring to our attention.

  I would be happy to report to the administrator of the Forum and see what can be done, please contact me private by clicking on my name in blue, and then on the next page click the upper right corner where it says 'send private message '.  Thank you.

  Kind regards
  Robert

• How to network Vista workaround (the domain profile) location

  If Windows Vista is joined to a domain, the network connected to the field of authentication is marked as 'the domain profile.

  Unfortunately, if there is another NIC (Interfaces virtual VMWare), Vista doesn't know where they are. Whatever you choose for these NICs is 'public' or 'private '.

  The result is that a defined group policy Firewall profile 'Domain' the problem is never used, until additional network cards have been completely disabled.

  Anyone know a workaround to classify the VMWare NICs as "field located?

  Concerning

  Severin

  Try searching for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\" network {4D36E972-E325-11CE-BFC1-08002BE10318} cards (e.g. VMnet1, VMnet 8, etc.), and by adding a REG_DWORD value called ' * NdisDeviceType ' set to 1. Then disable and re-enable the network cards. This will make disappear from "Network and sharing Center" Vista.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Problems with profile after the loss of power.

  During the recent snow storm, the power in the House flickered market several times and once it was over my wife has had some problems connecting on his profile. After a reboot, could she do to her profile without any problem. My profile was gone, none of the documents office, my antivirus doesn't work in my profile only, everything that I had linked with my profile disappeared. My system restore has been disabled so can't use it. Does anyone have any ideas on how to do to recover my profile and all my documents?

  On the assumption that your profile has become corrupt (not a rare event), the following articles should help you...

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• I have a problem with my location network cards and I can not find my LAN on my PC.

  I can't find my LAN

  Hello! Im having trouble with the location of my network cards and I can not find my LAN on my pc - I have recently updated my software with phone system automated.

  Hello

  Perform the steps in the article mentioned below and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Hope this information helps.

• problem - can not locate folder Inbox. can't send e-mail. just receving spam.

  problem - cannot locate inbox file.can not send e-mail. just getting spam.

  The fact that you receive spam means that you don't have a connection to the ISP yet may not be entirely correct - in particular the SMTP section responsible for sending emails.  Have you tried to send an email to yourself - probably not if you can not send (or get a friend to send one to you).  If this isn't the case, please do and let us know if you are able to receive in both cases.  I would like to know if you can receive regular emails except just spam.

  What e-mail program you are using (name and version)?  When did you start this problem?  Have you contacted your ISP for assistance to reconfigure your e-mail settings to make sure that they have not changed and are correct (or provide assistance to this problem in general)-they should be willing to help you troubleshoot problems connecting at least (but maybe not the inbox lack).

  When you respond with results and answers to the questions above, we can decide if we can help you here or if it is best to refer you to experts in any email program that you use.  Let us know what the ISP has to say and if they are able to solve all the problems.

  Thanks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with Profile Service logon

  My Profile Service has not logon.  Profile of user was not found.  do not have the password reset disk. How can I access?  totally locked.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones 8350i 'profile' located on normal, but performing on vibrate/ring

  Ok. I have read several posts regarding the definition of the profile in a certain framework (Loud, Normal or another), but my problem is that I know exactly how do it, but I have mine set on one thing and it does something else (the value to 'normal' and reacts as vibrate/ring). This is my first BB and the first smartphone in general, but I'm at least tech savvy and have put things as it should. Ask yourself if this is a bug or there at - it another setting that should be done as well? If there is, which does not make any sense to me.

  Any response is greatly appreciated. I'm your humble thanks now and significantly.

  Thank you!

  After looking again, I found a solution. I guess there are some "tweaking" as neds to do now. I put a user profile now. There is no mention of this in my little book on disabling don't vibrate completely. I'll improve and we hope get straightened results. I can I have posted this in haste before that I searched deep soul. Sorry for the preventive post, but thanks for all the information USEFUL here!

• Hi there, I'm on win7 64 bit ultimate on Dell Inspiron and I suffered from journal of problem user profile services.

  I got stuck on this page, and it is not moving forward. I tried several solutions such as the creation of administrator accounts and I followed the other article which told me to change the .bak files that are not in my system. I even tried microsoft fix and it also forces the problem. I have heard that installing new software like google chrome or google toolbar is causing the problem, is it true? Hope you find a solution for me.

  Hi Bainigeri,

  Thank you for your response.

  Try to create a new user account and check the issue by following the steps in the link below.

  Create a user account:

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  If everything works well in the new user account, then I suggest you to transfer data and settings to the fixed aid profile is corrupted from the link below.

  Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope the above information helps you and your response is very important for us to ensure a proper resolution

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• The problems of folder locations update

  When you do a photoshoot save all my files on my laptop. Then I transfer the files to my server in my studio. I started to have problems with lightroom not showing the places when I want to update the locations of files other than the "My pictures" folder I can still see one that is in my computer or my network. When I try to do in lightroom. Someone knows what's the problem? I don't remember having this problem before. This does not happen with the files that are already in my network, I can update the location of these files without problem because it shows all my network places and the folder on my C: / drive.

  Soloforma

  Type the exact location where you see 'File' in your screenshot as a work around to

• Where is the profile located in El Capitan?

  I can't find the profile folder, or all records related to Thunderbird after installing under ElCapitan! 10.11 even supported at this stage?

  Hello

  You should be able to find your Thunderbird profiles folder by;

  1. In Thunderbird, go to help, troubleshooting information
  2. In the window that opens, in the title of the Basic application, click on the button record show , next to the profile folder.

  This will then open the profile for Thunderbird folder in your operating systems management Viewer.

  I hope this helps, but if not, please come back here and we can look at another solution for you.

• Problems with multiple locations

  I am having trouble wiring a table 2D plotting a graph of waveform information. According to everything I read in the documentation, this shouldn't be a problem, but it is. One thing I read said to activate the option 'Convert table' draw with a 2D array, but this option is grayed out in the menu. The strange thing is that there are other waveform graphs in the project who accept 2D data tables but I am unable to find a difference in the options between them. I have attached a few photos to see what I mean.

  Thanks for your help!

  I discovered the problem - the graph was not initially wired to a 2D array. I guess it maintains its initial entry 'type' for the duration of the program.

  Thanks for your time though.

• The problem of profile

  Hi, I need a few powershell commands for these tasks
  (1) recovery of the list of all servers connected by user
  (2) by deleting files corrupted profile and registers all servers

  I assume you mean connected to the host operating system on a virtual machine?

• Problem with profiles of camera calibration

  I use Lightroom 4.2 under windows with a Canon 450 d for awhile and I use only raw files.

  On the 'caméra Calibration' tab, I could choose between acr4.4, Adobe Standard and a few presets for canon (landscape, neutral, etc.)

  In my opinion the ACR4.4 profile gives me better and more natural colors most of the time

  Last week, I upgraded to a Canon 650 d. When I import my pictures and go to 'develop', I can only choose between the Standard Adobe and canon presets. There is no profile of x.x ACR (replace the 'x' by whatever it takes for a 650 d)

  It is not the end of the world, but is it possible to download it?  or did remove it completely for the newer models.

  In the window "about adobe photoshop lightroom", it says that I have Camera Raw version 7.3. Reinstall lightroom makes no difference and all my drivers are up to date.

  ACR's legacy profile. It no new cameras. It will not disappear for the older cameras, however.

  Adobe Standard is Adobe, well, the current standard.

  If it is not optimal for your tastes, you can change using the DNG Profile Editor.

  Rob