Four questions about how to change the Satellite L650 - 1 M 0
Hello
The laptop Toshiba L650 - 1 M 0 is possible to add the Bluetooth?
Currently, I don't have a WiFi card.
I have a second question:
The laptop Toshiba L650 - 1 M 0 is possible to replace the ports USB 2.0 to 3.0?
And the third question:
The laptop Toshiba L650 - 1 M 0 is possible to replace the matrix with a resolution of 1366 x 768 full HD (1920 x 1080) resolution?
Most recent:
The laptop Toshiba L650 - 1 M 0 is possible to replace the processor and graphics card?
These questions are for the future. I mention these parts when you are already old and weak.
Sorry for my bad English, but I used the Google Translator because I do not know how the English language. I only know the Polish ;)
Please write without mistakes, because the Google translator will be able to translate for me.
> Is that the laptop Toshiba L650 - 1 M 0 is possible to add the Bluetooth?
I think it would be possible to upgrade with the combo Wifi/BT card.
But I haven't found any info what WLan/BT cards combo would be compatible 100%.
You should test
> Laptop Toshiba L650 - 1 M 0 is possible to replace the ports USB 2.0 to 3.0?
No, the USB ports are part of the motherboard.
> Is that the laptop Toshiba L650 - 1 M 0 is possible to replace the matrix with a resolution of 1366 x 768 full HD (1920 x 1080) resolution?
I guess it would be possible, but we must find a 15.6 screen that supports such a resolution.
> Laptop Toshiba L650 - 1 M 0 is possible to replace the graphics card and processor?
GPU is not extensible.
In some cases its possible to upgrade the processor, but you will need to check which processors are supported by Mobile Intel HM55 Express Chipset
But even if the chipset would be favourable to a new processor, there would be still pending regarding BIOS support.
However, this upgrade took isn t supported by any laptop manufacturer, and I guess that its your own risk by doing this.
Tags: Toshiba
Similar Questions
-
Re: How to change the Satellite L650-108 screen resolution greater than 1024 x 768
You just bought a new 108 L650, but I cannot fix the upper to 1024 x 768 screen resolution.
It should be 1366 x 768.Right-click on the desktop and choosing the resolution of the screen only gives you the opportunity to 800 x 600 or 1024 x 768. I can't find anyway to get it to the correct resolution.
Help would be most appreciated.
See you soon,.
Tillman
Hello
Have you installed a graphics card driver?
Please go to page European driver Toshiba and download and reinstall the graphics driver.Good luck
-
How to change the Satellite L670D-103 using new SSD 80 GB HARD drive?
Hello
I have a Satellite L670D-103 with a 320 GB HARD drive running at 5400 RPM which is too slow for me.
So I plan to change this factory by a new SSD HDD to increase the performance of the overall system :)
But as the SSD are expensive, I have only a 80 GB SSD.
I built the recovery on a USB media and I want to use it to restore my system to the new SSD (I previously did the space needed to ensure that all data can be stored on my new SSD 80 GB space; p)
Retrieving SSD partitioning new procedure is done without error, but when copying image to restore data to freshly created the partition, one not enough space error stop the process!
It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb).
So, how can I restore mysystem on my new SSD?
Thank you
Stéphane.> It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb)
To my knowledge, you have different recovery options:
(* 1) * recovery of factory default software
(a) recovery to out of box state
(b) recovery without changing the HARD drive partitions
(c) recovery of a custom size partition(* 2) * "erase the HARD drive.
I think that if you choose factory default software recovery of-> recovery to out of box state then the recovery would create exactly the same size of partition on the new SSD which were available on the 320 GB HARD drive.
I think this might be the reason why you have received this message.Perhaps you need to choose the 3rd option Recovery on a custom size partition
What do you think?
-
question about how to combine the two scripts.
HelloI have a sql script that can display a table (or view) all the information, it works fine. I call it validate_table.sql, as below:
command prompt
accept invites owner "Enter table owner:
accept invites from TABLE_NAME "Enter object (table/View...) "name:"
column owner format a10 column 'owner '.
column format a30 topic 'Object name' object_name
column object_type format a15 direction "Type of object".
Status format a10 column titled "Status".
in the heading of column created format a20 "created."
the LAST_DDL_TIME format a20, heading 'LAST_DDL_TIME.
Select
owner
object_name
object_type
status
, to_char (created, "DD_MON_YY hh24:mi:ss") created
LAST_DDL_TIME,
Of
DBA_OBJECTS
where
object_name = upper ('& table_name') and owner = upper ('& owner');
command promptprompt -- ----------------------------------------------------------------------- ---
Guest - table/view structure-
prompt -- ----------------------------------------------------------------------- ---
command prompt
describe and owner... & table table_namecommand prompt
prompt -- ----------------------------------------------------------------------- ---
guest - list assigned user/subsidies-
prompt -- ----------------------------------------------------------------------- ---
command prompt
set pagesize 50000
set linesize 10000
set verify off
Set feedback off
column lvl format A4 direction "Lvl".
proprietary format of columns A14
format column in table_name A29
A38 dealer column format
column privilege A10 format
SELECT 'Role' lvl, t.table_name, t.grantee, t.owner, t.privilege
OF dba_tab_privs t
WHERE t.grantee IN (SELECT FROM dba_roles role WHERE = role t.grantee) and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
UNION
SELECT 'User' lvl t.table_name, t.grantee, t.owner, t.privilege
OF dba_tab_privs t
WHERE t.grantee IN (SELECT username FROM dba_users WHERE username = t.grantee) and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
UNION
SELECT 'Pub' lvl, t.table_name, t.grantee, t.owner, t.privilege
OF dba_tab_privs t
WHERE t.grantee = 'PUBLIC' and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
ORDER BY 1, 2, 3;command prompt
prompt -- ----------------------------------------------------------------------- ---
guest - list of synonyms created.
prompt -- ----------------------------------------------------------------------- ---
command prompt
proprietary format of columns A15
synonym_name A20 column format
A15 table_owner column format
format column in table_name A40
DB_link A40 column formatSelect the owner, synonym_name, table_owner, table_name, DB_link from DBA_synonyms where Table_name = upper ('& table_name') stopped by the owner;
command promptprompt -- ----------------------------------------------------------------------- ---
guest - list index created-
prompt -- ----------------------------------------------------------------------- ---
command prompt
Select
table-name
index_name
index_type
nom_tablespace
status
of DBA_indexes
WHERE table_name = upper ('& table_name') and owner = upper ('& owner')
order of table_name, index_name;
command promptprompt -- ----------------------------------------------------------------------- ---
guest - list of constraints-
prompt -- ----------------------------------------------------------------------- ---
command prompt
format column in table_name A15
format of column cons_type A15
cons_name A20 column format
check_cons A25 column format
VALIDATED A20 column format
column status A10 format
last_change A20 column formatSelect
table-name
(case constraint_type
When 'P', then 'Primary Key '.
When 'R' then 'Foreign Key'
When 'C' then 'check '.
When 'U' then 'single '.
When 'o' then 'read only display '.
When 'V' then 'check the view. "
When 'H' then 'Hash expression. "
When 'F' then 'REF column.
When the of ' then 'additional logging.
cons_type end)
constraint_name cons_name
condition_de_recherche check_cons
status
VALID
last_change
of dba_constraints
where owner = upper ('& owner')
and table_name = upper ('& table_name')
order of cons_type;I have another script that allows to display the newly created tables (table, table names) in the last 24 hours.
SET SERVEROUTPUT ON;
DECLARE
CURSOR tmp_cur IS
SELECT master, object_name
FROM dba_objects
WHERE object_type in ('TABLE', 'SEE') and the owner not in ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN") and last_ddl_time > sysdate - 1;
tmp_rec tmp_cur % ROWTYPE;
BEGIN
FOR tmp_rec IN tmp_cur LOOP
DBMS_OUTPUT. PUT_LINE)
tmp_rec. Owner | ' ' || tmp_rec.object_name);
END LOOP;
END;
/
The gap of the first script (validate_table.sql) is that it can only check table one by one by manual entry, then how can I combine these two scripts, to make a scipt that can check all newly created tables (not a table) in the last 24 hours?
I thank very you much in advance!
Hello
If you already know how to find the owner and all the tables created table_name recently. One thing you can do is to change all the WHERE clauses in validate_table.sql, so instead of things like
where object_name = upper ('& table_name') and owner = upper('&owner');
you say
WHERE (owner, object_name) IN
(
SELECT master, object_name
FROM dba_objects
WHERE object_type in ('TABLE', 'SEE')
AND owner NOT IN ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN")
AND last_ddl_time > SYSDATE - 1
)
;
Here is another approach:
Validate_table. SQL is quite handy as it is. You may want to run this script for tables, even when you know that they are not new. Divide into 2 scripts: one called ask_and_describe_table.sql, which looks like this:
-Ask_and_Describe_Table.sql
accept invites owner "Enter table owner:
accept invites from TABLE_NAME "Enter object (table/View...) "name:"
-You can use any name path instead of d:\some_dir below:
@d:\some_dir\describe_table & owner, table_name
and the other one called Describe_Table.sql, which starts like this:
-Describe_Table.sql
DEFINE owner = & 1
DEFINE table_name = & 2
column owner format a10 column 'owner '.
...
and continues with the same exact content as validate_table.sql.
Now, to write another script (I'll call it Describe_Recent_Tables.sql):
-Describe_Recent_Tables.sql - create and run Describe_Many_Tables.sql
-Turn OFF the devices designed to help people to read the output:
SET ECHO OFF
SET FEEDBACK OFF
SET PAGESIZE 0
VERRIFY OFF SET
-Create a Describe_Many_Tables.sql:
COIL d:\some_dir\describe_many_tables.sql
SELECT ' @d:\some_dir\describe_table '
|| owner
|| ' '
|| object_name
FROM dba_objects
WHERE object_type in ('TABLE', 'SEE')
AND owner NOT IN ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN")
AND last_ddl_time > SYSDATE - 1;
SPOOL OFF
-Features lighting designed to help people to read the output:
SET ECHO ON
SET FEEDBACK ON
SET PAGESIZE 50
SET VERRIFY ON
-Describe_Many_Tables.sql performance
@d:\some_dir\describe_many_tables
I guess that all of your tables have standard names (for example, start with a letter, no spaces in the name,...), which don't require quotation marks. If they could, then the same basic approach will work, but the details are a little messier.
When you want to see the information on a single table or view, no matter how old it is, driven
Ask_and_Describe_Table
or, if you do not need to question the owner of the table and the name, something like
Describe_Table SCOTT EMP
(You can find that you really need not Ask_and_Describe_Table.sql).
When you want to do this for all the tables created in the last 24 hours:
Describe_Recent_Tables
-
Basic question on how to change the menu text in the FLA file
I'm kind new to Flash and I'm a little stuck on where I'm supposed to change the menu text in the flash file I bought (link below).
I can see where to change the hyperlinks in the action script for each menu item, but I can't find the text (for example I want to change the word 'Our gallery' and type 'Compétitions'
http://www.abcpchelp.com/header3_fv8.flaThank you!
This forum is very good -
Question about how 'First' makes the sequences
Hi all
I have a small question. I have a calendar in which I placed a transparent video with a timecode effect thereon for the purpose of lining of the stuff. I turned the visibility of it, but I wonder if I should remove it before as I give to improve the rendering time. First will interfere with him or she will calculate that it is there as an object for "invisible" also?
This may sound really stupid to ask, but I'm learning how to be as effective as possible in my workflow and if first does not care that it is because he is disabled, so I'd be inclined to let incase I need it again, but if she would accelerate rendering my project then I would take it before my final DVD build I intend to publish.
Any thoughts?
Premiere Pro makes that material visible. So feel free to leave there with visibility turned off.
Edit: to prove to yourself, add an effect to transparent video which causes the rendered line go red. As a"camera view". Die the eyeball and the Red goes. Make sense?
-
Questions about how to avoid the "while OTHERS"
Hello
I am currently teaching myself PL/SQL. I have the script according to which uses SO that OTHERS (not a good thing):
When I run the above script and enter the value - 10 when prompted, I get the following output:undef sv_student_id declare v_student_id student.student_id%type := &sv_student_id; v_total_courses number; begin if v_student_id < 0 then raise_application_error(-20000, 'A student ID cannot be negative'); end if; exception when others then dbms_output.put_line('Got an exception'); end; /
What leaves to be desired (like a better message ;))SQL> @213c Enter value for sv_student_id: -10 old 2: v_student_id student.student_id%type := &sv_student_id; new 2: v_student_id student.student_id%type := -10; Got an exception
The questions are:
1. How can I get the outer exception to display the error message specified in the raise_application_error instead of a generic message (such as 'Got to exception')?
2. I want catch exception using something specific, like "when-20000 then" (which does not), instead of the Tote so "than others'.
Thank you for helping,
John.
Published by: 440bx - 11 GR 2 on Aug 14, 2010 08:01 - plural for questions1)
undef sv_student_id declare v_student_id number := &sv_student_id; v_total_courses number; begin if v_student_id < 0 then raise_application_error(-20000, 'A student ID cannot be negative'); end if; exception when others then dbms_output.put_line('error_code='||sqlcode ||', error_message='|| sqlerrm); end; /
2)
undef sv_student_id declare v_student_id number := &sv_student_id; v_total_courses number; my_ex exception; pragma exception_init(my_ex, -20001); begin if v_student_id < 0 then raise my_ex; end if; exception when my_ex then dbms_output.put_line('my catch!'); end; /
and maybe, that
undef sv_student_id declare v_student_id number := &sv_student_id; v_total_courses number; begin if v_student_id < 0 then raise_application_error(-20001, 'A student ID cannot be negative'); end if; exception when others then if sqlcode = -20001 then dbms_output.put_line('-20001 message'); elsif sqlcode = -20002 then dbms_output.put_line('-20002 message'); ... end if; end; /
-
Question about upgrading HDD on the Satellite M40X-184?
Hello
I would like to ask if there is an option to insert a new hard drive in my toshiba. As much as I know that there is no official support for this?
There is an access to the place where the disc is placed on the side of the laptop. S
o that my question is
1. is it possible to put a new drive (faster and longer)
2. is it possible without losing the warranty
3. what discs do you offer meThanks Szczepaan
It seems that the device must be capable of supporting hard drives 2.5 "up to 120 GB. Additional cell phone supports DMA synchronous Ultra100.
You can use hard disks with a rotation of 4200 / 5400 RPMCU
-
I have not previously recorded about how to change the setting of password to save them now?
I haven't used the password in Firefox - choose not to save their economy function. I want to change this so all of my passwords are now saved. I can't find clues or information for me to do. Can I erase everything and start over?
Chris.
For more information on using this feature, see the article Password Manager - don't forget, delete, edit , and import passwords saved in Firefox.
-
Question about upgrading memory on the Satellite L20-181
Hello
The recommended minimum is memory for Windwows XP 256 MB and I don't understand how the company could get far notebook sale with integrated graphics with 256 MB shared system memory.
In any case, I want to improve my Toshiba and my intention is to buy 512 MB more memory, such as http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=20049&ft=m&st=3
Will it work properly with 768 MB or I will only buy the same pair: 256 + 256, 512 + 512?
Thank you very much.
Hello
First of all, you are not right. Windows XP also works with the low value of the memory.
But of course it depends on memory so the OS applications will run more rapid or slower.However, the fact is that you can upgrade the memory on your laptop and it doesn't mater if the modules have the same value of memory or not.
In this case, the laptop came with 256 MB and you can install detox the second module of 512 MB memory.PS: I recommend installing the 512 MB in the first slot and the 256 MB in the second Bank.
-
Question about how to include the virtual machine output
Currently, using this command:
Get - vm | Get-networkadapter | ForEach-Object {Write-Host $_.} The name', ' {$_.macaddress} '.
Gives me this result:
NIC 1, 00:50:56:bc:00:1 c
NIC 1, 00:50:56:bc:00:28
I'm interested also in writing the name of real virtual machine as well.
name of the virtual machine 1, NIC 1, 00:50:56:bc:00:1 c
name of the virtual machine 1, NIC 1, 00:50:56:bc:00:28Don't know how to work out of virtual machine name as 'Name' asks also the network card information.
Try it like this
$report = foreach($vm in (Get-VM | where {$_.PowerState -eq "PoweredOn" -and $_.Version -eq "v7"})){ Get-NetworkAdapter -VM $vm | ` Select @{N="VMname";E={$vm.Name}}, @{N="MAC address";E={$_.MacAddress}} } $report | Export-Csv ".\test.csv" -NoTypeInformation -UseCulture
-
Question about how Oracle manages the Redo logs
Hello
Assuming a configuration which consists of 2 redo log groups (groups A and B), each group of 2 disks (disks A1 and A2 for Group A) and B1 and B2 disks for Group B. Additionally, assume that each redo log file resides by itself in a disk storage device and that the device is dedicated to her. So in the situation described above, there are 4 discs, one for each redo log file, and each disc contains nothing other than a redo log file. Also, assume that the database is in ARCHIVELOG mode and the files from archive is stored on another different set of devices.
kind of graphically:
The question is: when the disks that make up the Group A are filled and Oracle switches to the disks in the Group B, can the group drives to take offline, perhaps even physically removed from the system if necessary without affecting the functioning of the database? Can the archiver process temporarily delayed until the disks (which have been removed) are presented online or is the DBA have to wait until the end of the process to archive a copy of the redo log file creating in archive?GROUP A GROUP B A1 B1 A2 B2
Thank you for your help,
John.Hello
A journal of the groups fallTo remove a group of online redo logs, you must have the ALTER DATABASE system privilege. Before you delete a line redo log group, consider the following precautions and restrictions:
* An instance requires at least two groups of files logging online, regardless of the number of members in the groups. (A group is one or more members.)
* You can delete a group of newspapers online redo only if it is inactive. If you need to drop the current group, first force a log switch occurs.
* Make sure a group of online redo logs is archived (if archiving is enabled) before dropping. To see if this happens, use the view LOG V$.SELECT GROUP #, ARCHIVED, STATUS FROM V$ LOG;
GROUP # ARC STATUS
--------- --- ----------------
1 ACTIVE YES
2. NO CURRENT
3 INACTIVE YES
4 INACTIVE YESDelete a group of newspapers online redo with the SQL ALTER DATABASE statement with the DROP LOGFILE clause.
The following statement drops redo log group number 3:
ALTER DATABASE, DROP LOGFILE GROUP 3;
When a group of online redo logs is deleted from the database, and you do not use Oracle managed files, operating system files are not removed from the disk. Instead, control of the associated database files are updated to remove members of the Group of the database structure. After deleting a group of online redo logs, make sure the drop completed successfully and then use the command of operating system appropriate to delete the dropped online redo log files.
When you work with files managed by Oracle, the cleaning of operating system files is done automatically for you.
Your database will not be affected as you can work with 2 files, redo log in each group, as the minimum number of redo log in a database file is two because the process LGWR (newspaper writer) writes in the redo log in a circular way. If the process crashes because you have 2 groups only if you want to remove 1 Add a third and make that the current group and remove the one you want to be offline.Please refer to:
http://download.Oracle.com/docs/CD/B10500_01/server.920/a96521/onlineredo.htm#7438
Kind regards
Mohamed
Oracle DBA -
Question about upgrading memory on the Satellite A210-127
I upgraded my memory form 2 GB (2 x 1 GB) 4 GB (2 x 2 GB) with two modules of memory Kingston KVR667D2S5 / 2G (PC2-5300 CL5).
For two weeks, he had no problems, but then I got the blue screen every time when the system starts making reference to I guss memory error.
I tried to replace the memory with original Toshiba but still blue screen modules. I conctacted service and they say that
It may be the incompatibility of memory, virus or malfunction of the hard drive.
After a few days of work on the solution I reinstal my laptop Toshiba DVD and replace the original brief. Now everything works fine.I wonder is Kingston memory cause of my problem or somethig else?
Nobody knows is memory Kingston KVR667D2S5 / 2G 2 Gb compatibile with Toshiba?Hello
Honestly, the Kingston offers products of high quality and, I think, you are the first person who complains of Rams from Kingston.
If you visit the page Web of Kingston you can find a list of compatible RAM. Your module is listed here? -
Satellite A200 - 23 X: how to change the app assigned to buttons on the touchpad
Dear friends,
I have the Toshiba A200 23 X with Vista.
I installed the Synaptics pointing for the touchpad device. I assigned in the 3 buttons, 3 different possibilities for that when I touch each of these buttons to start the appropriate application.The question is how to change the applications that I assigned?
The first time, before fix, when I touch for example, the first button, a small window appears asking to attach a request, the same happened with the rest buttons 2.
But now I want to change these apps that I have attached to these buttons, I know no way th.If anyone can help please.
Thank you very much
Hello
I think you can change the settings of touchpad button in the properties of the touchpad.
You can find properties of * Panel-> mouse-> device (last tab)-> settings button settings *.There are a few options. You must choose the option called Dual mode
You will find the area where new applications could be affected.Concerning
-
How to change the xml link?
First a few words about my background:
I got a page on a version of InDesign CS3 layout. Now, I'm creating a procedure to automate the production of several pdf based on this provision. Manually process would be to open the page layout; change the xml with each xml source link and create a file pdf corresponding...
First question:
In CS4 when I want to manually edit the xml link, the open dialog box prevents me (xml files are grey) to select xml files, it is a well known problem? How can I avoid it?
Second question:
How to change the script xml link?
Last question - applescript question -:
How to skip application dialog boxes? As "this document is missing a few links, would continue you?
If you want to be able to help me, thanks in advance!
There is a piece of code found on the net:
tell document 1 of application "Adobe InDesign CS3"relink thisItemLink to someFileReferenceupdate thisItemLinkend
Maybe you are looking for
-
can not activate passwordregistration
CONFIGURATION security record of the ist passwords button disabled. To this effect, I can't use the passwordmemory Thank you in advance for help Dr. L. Hoins
-
How can I change the notebook in adobi
for some reason all my attachments coming out on e-mail go rather Notepad then adobi can someone tell me how to change ot to adobi pdf Thank you very much Erika
-
Windows cannot access the specified device path
I have a HP 2000 laptop with windows 7. I had problems playing a dvd. I can burn images and photos of viev on cd. When you try to play a dvd a message-" Windows cannot access the specified device path. You can have not permissions to access this item
-
Cannot connect to windows 7.
"In as long as administrator, I tried to eliminate, connect to windows 7 using run NETPLWIZ and unchecking" users must use password, etc. "and then it prompted me name and password, I put this in and hit 'apply' and OK. I restarted the computer and i
-
How to remove faronics dfs software windows 7
I'm unable to start windows 7 ultimate service pack 1, because software faronics dfs hangs the computer when I uninstall or install software or the thing and it turned off the pc and the next day I start the pc, I find the same software that i uninst