FPGA Compile Error - Xilinx error

I am compiling my FPGA VI on my laptop and have failed to do.  The VI compiles correctly on my PC lab.  I tried to uninstall and reinstall LabVIEW FPGA and Xilinx tools without change.

I'm running SP1 2014.

I've attached my log for compiling file.  I tried to geenrate a new specification to build with no change.  Compilation of a white VI works fine.

The FPGA VI has some registers and interacts with the DIO card using FPGA.

I appreciate all help.

Matthew

So, I finally determined what was the problem.

I had created a junction of Windows for several directories for some files out of a second disc of port.  As regards to Windows is, C:\NIFPGA is exactly and is supposed to hide the fact that he is really D:\NIFPGA.

Well, apparently, he does not hide that quite some programs.  I noticed in the Xilinx log file that it maintained exchange between C:\NIFPGA and D:\NIFPGA.  So, I tried a Windows symbolic link to Diretcory, which is similar to the junction (according to my research, the junction is supposed to be the 'best'), and now it seems to work correctly.

So the lesson here is: If you want to move this directory NIFPGA, reinstall the system, or use a symbolic link to remap the directory, not a junction.

Tags: NI Software

Similar Questions

  • tables of fixed size in FPGA compilation error - how to implement a waveform control in an FPGA?

    Hello

    After being stuck for two days, please let me briefly describe my project and the problem:

    I want to use the cRIO FPGA for iterative control of waveforms. I want to capture a full period of the waveform, subtracting a reference waveform period and apply control algorithms on this. Subsequently the new period of correction must be sent again for the output module OR. If it does not work, the captured waveform will look like the one reference after several iterations.

    I am planing to create an array of size fixed for the capture and the reference waveform (each around 2,000 items for a given period). I use so 2 paintings of each elements of 2000. I use the function 'replace the subset of table' to update each element captured in the loop sampling and a feedback for each table node to keep in memory (I also tried shift registers, but then the berries do not have a fixed size any more and I can't start the compilation process).

    If I try to compile the FPGA vi, I get the following error:

    Details:
    ERRORortability:3 - Xilinx this application runs out of memory or met a memory conflict.  Use of current memory is 4167696 KB.  You can try to increase physical or virtual memory of your system.  If you are using a Win32 system, you can increase your application from 2 GB to 3 GB memory using the 3 G switch in your boot.ini file. For more information, please visit Xilinx answer Record #14932. For technical support on this issue, you can open a WebCase with this project attached to http://www.xilinx.com/support.
    "Synthesize - XST" process failed

    Before I added berries to my code I could compile the FPGA without problems. So, it seems that the tables are too big for the FPGA. :-(

    Therefore, I would like to ask if there is perhaps a better method to implement my problem in LabVIEW FPGA? How could avoid the tables to save my waveforms on a period?

    Thanks a lot for your help in advance.

    Best regards

    Andreas

    Unfortunately, the LabVIEW FPGA compiler cannot deduct stores shipped from berries (yet). When you create these two large paintings, you are creating essentially several registers very, very large. Just by looking at your picture, I guess that there are at least 4 copies of each of the tables.

    You want to use LabVIEW FPGA memories instead. You can create memories outside the loop and then read/write them where you are currently referencing the berries. The only change that you really need to do is to break down your treatment in scalar operations. I have attached a simplified version of your plan, I hope it helps. Let us know if you have any other questions.

  • DMA FIFO of FPGA compilation error

    Hello

    I have a cRIO 9074 with FPGA. I tried a simple piece of code to learn how to acquire the data that is generated on the FPGA at a rate of 10 KHz and transfer it to the host VI to treat later in offline mode. However, I meet this compilation error when you compile the FPGA VI base containing a node to write FIFO (photo of the VI attached below). In compiling the report, it is said that there are 256 RAM Block used (the total number is 40), so an error has occurred. The error notification of exact compilation from Xilinx report is reproduced below:

    # From the PAM program

    # o toplevel_gen_map.ncd - intstyle xflow-calendar toplevel_gen.ngd map

    toplevel_gen. FCP

    #----------------------------------------------#

    "Target part using" 3s2000fg456-4 ".

    Design of mapping in the lut...

    Guided running of packaging...

    Running based on the delay of packaging of LUT...

    ERRORack:2310 - type compositions "RAMB16" too found to adapt to this device.

    ERROR: card: 115 - the design is too large to fit the device.  Please consult the Design summary section to see what resource requirements for your design exceeds the resources available in the device. Note that the number of slices don't notice it that their packaging could not be completed accurately.

    NOTE: A file NCD will be always generated to allow you to examine the mapped design.  This file is intended for evaluation use only and will not be processed successfully by means of BY.

    Mapping performed.

    See the report of map file "toplevel_gen_map.mrp" for more details.

    Problem encountered during the packaging phase.

    Summary of design

    --------------

    Error number: 2

    Number of warnings: 125

    ERROR: Xflow - card program returned the error 2 code. Aborting the workflow execution...

    Bitstream not created

    Time history analysis

    What does that mean? How can I fix this error?

    Thank you

    Bogdan

    Hey,.

    Have you already tried to reduce the size of the FIFO memory?

    Christian

  • FPGA compilation error

    I'm converting a piece of code from 8.5 to 2011.  When I tried to compile the fpga vi to a bit file, I get the error attached.  Why is this?  Thank you!

    The thing is that the only solution that I found about this error is to install a patch or repair/reinstall Xilinx or LabVIEW FPGA tools.

    Christian

  • FPGA compilation error sbRIO 9632

    Hi guys,.

    I'm trying to write a simple piece of code to send a PWM signal to a PIN on my sbRIO-9632 (starter kit 2.0) to order a servo. I used the example of 'control a servo using PWM' and my code is pretty much the same. When I try to generate/compile the FPGA VI, it stops after only 4 to 6 minutes, saying an error has occurred. The compilation appears to hang during the process of the "card".

    The example is for a sbRIO-9631 so I created a new project for my robot Robotics and changed the PIN e/s that I use (Port5/DIO9). I search through forums but cannot find a solution to this :/

    I have attached my code and the XilinxLog file with it.

    Thanks for any help!

    MortZ

    Hello

    Sorry for the late reply! Have you made progress?

    Unfortunately, your zip file seems to be disabled on my PC. How it has been compressed?

    So what I meant by remove the digital Pulse.vi to generate, is to see if it affected the compilation. Please see if you can compile the FPGA code with the following approach:

    Create the new project > add your target sbRIO > add the VI attached to this post to your FPGA target > compile

    I think it would be beneficial to you to see if the problem is the compilation itself or the code you are trying to compile.

    In addition, you have any another available PC? Might be a good idea to see if your code compiles on another PC.

    Please make sure you have LabVIEW Real-time and LabVIEW FPGA installed (it should come with the Robotics module, but I recommend that you check that they have indeed been included).

    If the build process fails to map no matter what you do, I propose the following: make sure that the target passes a self-test of MAX. reinstall the Xilinx tools (only if it seems that the issue is not with the code, but with the compilation process itself).

    Good luck

    Best regards

    Christopher

  • cRIO 9014, FPGA compiler error

    I use cRIO 9014, that while the FPGA code compilation I get attached error.

    Please guide me ob who...

    Hi Olivier,.

    The displayed error is clear.

    Your system time is older than the time of installation.

    Change to correct time and try it...

    In addition, if you change your system time (IE computer), some software will not work. (another example is Gmail. Try to connect to Gmail after year settting in the previous year in your system. It displays error SSL.).

  • Xilinx Compilation error: Formal HDLCompiler:432 < eiosignal > has no real or default value

    Hello

    I've compiled several programs for sbRIOs previously but did not run in before compile errors. I can't find any support to see what is actually wrong. Any help with this would be appreciated!

    The summary of the situation of the Compilation is:

    LabVIEW FPGA: Compilation failed due to an error of xilinx.

    Details:
    ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 87: Formal has no real or default value.
    INFO: TclTasksC:1850 - enforcement process: synthesize - XST is made.
    INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000032_CustomNode.vhd", line 18. eiosignal is declared here
    ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 106: Formal has no real or default value.
    INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000033_CustomNode.vhd", line 18. eiosignal is declared here
    ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 125: Formal has no real or default value.
    INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000034_CustomNode.vhd", line 18. eiosignal is declared here
    ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", Line 144: Formal has no real or default value.
    INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000035_CustomNode.vhd", line 18. eiosignal is declared here
    ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 163: Formal has no real or default value.
    INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000036_CustomNode.vhd", line 18. eiosignal is declared here
    ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 182: Formal has no real or default value.
    INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000037_CustomNode.vhd", line 18. eiosignal is declared here
    ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd", line 201: Formal has no real or default value.
    INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000038_CustomNode.vhd", line 18. eiosignal is declared here
    ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" at line 220: Formal has no real or default value.
    INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000039_CustomNode.vhd", line 18. eiosignal is declared here
    ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd" line 50: Unit ignored due to previous errors.
    File VHDL C:\NIFPGA\jobs\R6n310u_Z1R8lYC\NiFpgaAG_00000031_SequenceFrame.vhd ignored errors

    -->

    Total memory use is 189944 kilobytes

    Number of errors: 9 (0 filtered)
    Number of warnings: 4 (filtered 0)
    Number of news: 0 (0 filtered)

    "Synthesize - XST" process failed

    I had similar errors (not real or by default) then compile using the code LV would not remove, but the compiler Xilinx would be due to determine it was unused.  It is usually inaccessible code with a register read in the main loop, but write it to enroll in a deal structure that would not be executed.  Differences in the ability of the LV compiler or compiler of Xilinx to decide what is safe to delete this could lead.

    Other times we had errors when a clock has been specified in the file of constraints, but the clock was not used.

    Maybe one of these two seemingly unrelated points might help.

    Shane.

  • FPGA compilation I get error & quot; ERROR: ConstraintSystem:58 & quot;

    I use the Xilinx LogiCore IP generator for generating DSP IP for my FPGA.

    The problem is that the names of the generated components are for a long time.

    On the Web site or http://digital.ni.com/public.nsf/allkb/F810E4289A420FE68625796600764C66

    He described a problem very similar to what I have ID issue 309260 "compilation error (ERROR: ConstraintSystem:58) when compiling a LabVIEW FPGA VI which contains a generated from a DSP graph VI.»

    I followed the suggestions and changed my IP to names such as 'A' and 'B '. As a first step, that it did not work, only to spend the entire project to another shorter path of directory did this job.

    Now, when I regenerate the IP address of 'Tools' > 'FPGA Modules' > "Regenerate the node IP" this will rename my IP with an additional random name at the end. So, if I look in my case not only that I have "A.vhd" but now, I'm also having 'A_F27AB4F7464E508DCCB219B2C4271B18.vhd '.

    It's very repetitive, and you should be able to replicate that.

    It's havoc with our software and with our software process control tool. Our database of software can accommodate only names of files of a certain length, and this violates. Also, I now have files with the exact same content but with different names.

    Do you have a fix for this problem as stated on your website?

    Kind regards

    I ended up using LogiCore externally. If you do a search in your LabVIEW FPGA tools folder, you should find "\Xilinx12_4\ISE\bin\nt\coregen.exe" (in the case of the specific version of Xilinx tools you have), it's the Xilinx Logicore exe without the National Instruments candy wrapper.

    I created all of my external LogicCore to LabVIEW (it actually makes life easer, the LogicCore tool has a better Manager to track all your IP LogicCore in any case) and then used the IP LabVIEW nodes to access the intellectual property.

    This has prevented the long names, and now I can better handle the INVESTIGATION period because I can put the code in a folder I want without breaking of LabVIEW.

    -good luck

  • LabVIEW FPGA CLIP node compilation error

    Hello NO,.

    I work on an application for my Single-Board RIO (sbRIO-9601) and faced with a compile error when I try to compile my FPGA personality via the ELEMENT node.  I have two .vhd files that I declare in my .xml file and all at this point works great.  I add the IP-level component to my project and then drag it to the VI I created under my FPGA.

    Within the FPGA personality, I essentially have to add some constants on the indicators and entries CLIP to my CLIP out and attempt to save/compile.  With this simple configuration, I met a compilation error (ERROR: MapLib:820 - symbol LUT4... see report filling for details on which signals were cut).  If I go back to my VI and delete indicators on the output (making the output pin of the CLIP connected to nothing), compiles fine.

    I've included screenshots, VHDL and LV project files.  What could be causing an indicator of the output of my VI to force compilation errors?

    Otherwise that it is attached to the output ELEMENT, a successful compilation...

    After that the output indicator comes with CLIP, compilation to fail...

    NEITHER sbRIO-9601
    LabVIEW 8.6.0
    LabVIEW FPGA
    Windows XP (32-bit, English)
    No conflicting background process (not Google desktop, etc.).

    Usually a "trimming" error gives to think that there are a few missing IP.  Often, a CLIP source file is missing or the path specified in the XML file is incorrect.

    In your case I believe that there is an error in the XML declaration:


      1.0
      RandomNumberGenerator
     
        urng_n11213_w36dp_t4_p89.vhd
        fifo2.vhd
     

    This indicates LV FPGA to expect a higher level entity called "RandomNumberGenerator" defined in one of two VHDL files.  However, I couldn't see this entity in one of two files.  If urng_n11213_w36dp_t4_p89 is the top-level entity, edit the XML to instead set the HDLName tag as follows:

    urng_n11213_w36dp_t4_p89

    Also - in your XML, you set the 'oBits' music VIDEO for output as a U32, however the VHDL port is defined as a vector of bits 89:

    oBits: out std_logic_vector (89-1 downto 0)

    These definitions must match and the maximum size of the vector CLIP IO is 32, so you have to break your oBits in three exits U32 output.  I have added the ports and changed your logic of assignment as follows:

    oBits1(31 downto 0)<= srcs(31="" downto="">
    oBits2(31 downto 0)<= srcs(63="" downto="">
    oBits3(31 downto 0)<= "0000000"="" &="" srcs(88="" downto="">

    Both of these changes resulted in a successful compilation.

    Note: The only compiler errors when you add the flag because otherwise your CUTTING code is optimized design.  If the IP is instantiated in a design, but nothing is connected to its output, it consumes all logic?  Most of the time the FPGA compiler is smart enough to get it out.

  • Accurate cycle of FPGA simulation error

    Hello.

    I have problems simulating an FPGA vi with a third party Simulator.

    I took the example of the tutorial found at http://zone.ni.com/devzone/cda/tut/p/id/12942 , but I get the error of dialogue (see attachment) during the construction of the export of the simulation.

    I put in the LabVIEW options the Simulator to ISim.

    The text in the details section of the dialog error box is:

    Error-61499 occurred at niFpgaSimulate_GenerateCompileOrder.vi<><><>

    Possible reasons:

    LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred.  Please contact National Instruments technical support on ni.com/support.

    There was an error in the compile command generation. The file that caused the problem is... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd. For more information, see compileOrder.log in the directory of niFpga simulation. The error information is less to:

    Line 53: Syntax error near ', '.
    ERROR: HDLCompiler:854 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 13: Unit ignored due to previous errors.
    ERROR: HDLCompiler:688 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 65: pkgnifpgasimulationmodel statement Package is not yet compiled
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 73: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 79: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 81: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 77: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 89: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 90: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 95: is not declared.
    ERROR: HDLCompiler:617 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 95: nearby; prefix must designate a scalar or array type
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 98: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 100: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 102: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 104: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 97: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 107: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 110: is not declared.
    ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 113: is not declared.

    Using LabVIEW 2011 (Xilinx tools 12.4) on Windows 7 Pro 64 bit.

    Any help would be appreciated.

    Thank you.

    Hello

    It seems that there is an article in the knowledge base that describes the error you see.  Let me know if it solves your problem.

    Error-61499 took place at niFpgaSimulate_GenerateCompileOrder.vi

    See you soon,.

    Ryan

  • Compilation of Xilinx not installed labview 2015 FPGA tools

    Hello

    I just installed Labview 2015 + FPGA Module on my computer with an older version of Labview 8.6.

    When I compile a labview FPGA project 2015 I got this error message "year error occurred while communicating with the server compilation" and warning "tools of Compilation of Xilinx not installed."

    I can assure you that my server of 2015 lunch perfectly and I installed everything correctly. I assure that it is a conflict between labview 8.6 and 2015 therefore uninstalled the older one.

    The problem is my build configuration is set to Xilinx 10.1 (which should be 14.7) and there is no way to change this.

    After looking around I found that Labview looking for best compilation tools then maybe this is not the problem

    Is there something I missed?

    Kind regards

    Hello

    I found the source of the problem. The FPGA, I used was based on a FPGA Virtex II matrix that is not compatible with this version of the build tools.

    Thanks for helping me!

  • FPGA Compilation fails because of the mistake of Xilinx

    My FPGA compiles and I cannot understand why. There is nothing crazy in my FPGA VI of really, it seems strange to have this type of problem. I can't reach the code because its owner, but it's pretty simple because it reads all channels from a single module and records them in a data FIFO. I have compiled successfully any FPGA code on this computer, so I should definitely have everything needed to compile.

    My system consists of one NOR cRIO 9030 with a single module 9220. Below is the Compilation of summaries.

    ---

    LabVIEW FPGA: Compilation failed due to an error of Xilinx.

    Details:
    ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:295]
    ERROR: [Synth 8-1031] knidmahighspeedsinksize is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:296]
    ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:301]
    ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:302]
    INFO: [Synth 8-2810] pkgshimswitchedlinkdmaportifc unit ignored due to previous errors [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:68]
    ---------------------------------------------------------------------------------
    Development of finished RTL: time (s): UC = 00:00:07. delay = 00:00:31. Memory (MB): peak = 798.605; gain = 204.203
    ---------------------------------------------------------------------------------
    ERROR: [Common 17-39] 'source' is not due to previous errors.
    INFO: [Common 17-83] release license: synthesis
    3 info, 0 Warnings, 0 critical warnings and 4 errors.
    synth_design failed
    : ERROR: [Common 17-39] 'source' is not due to previous errors.

    When running
    «source - notrace.» /. Xil/Vivado-6035-ip-10-60-203-176/realtime/toplevel_gen.tcl ".
    called inside
    «synth_design-top "toplevel_gen" - part "xc7k70tfbg676-1"-"full" flatten_hierarchy "»»
    (file "/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/synthesize.tcl" line 21)
    called inside
    "source" / opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/synthesize.tcl "" "
    exit #.
    INFO: [Common 17-206] exit Vivado at Tue Mar 24 23:58:54 2015...

    Compile time
    ---------------------------
    Introduction date: 24/03/2015-16:46
    Date recovered results: 24/03/2015-17:00
    Waiting time in the queue: 00:24
    Compilation of time: 13:22
    -Generate a Xilinx IP: 00:00
    -Summarize - Vivado: 01:27

    Compilation has restarted on
    24/03/2015-16:57

    ---

    Any help would be much appreciated!

    Thank you

    James.Morris wrote:

    Okay, so it seems that I get the error with a project from scratch and an FPGA with a single command and an indicator.

    I download the latest FPGA 2014 SP1 installation and I hope that will solve my problem.

    Well I'll mend, which fixed the problem! Somewhere along the line, my install FPGA must be corrupted.

    Thanks for the help, guys.

  • LV 2011 (and 2012 LV) compilation error. Size not valid in _InstSize: 21

    I created a Subvi in LV8.5 to manage events UI outside a main vi. The Subvi gets control references who are registered for the events, through a queue that all actions are sent to a consumer case, nothing complicated. Everything works fine in LV8.5, but now I got all LV2011SP1 on a Windows 7 64 bit and I still get the same error:

    "Compile error. Report this issue to National Instruments Tech Support. Invalid size in _InstSize 21 "

    which appears 3 times. I tried to open the same code also in LV2012, same error... When you try to isolate the problem, I discovered that by disabling the code in 3 cases of greater consumption that I can get rid of the warning, but then I can't reduce the problem to one...

    Any ideas?

    Yes, the thing to put 'problem' labview code into a Subvi its own helped me as well.

    My speculation is that it forces the choice of another compiler (without the bug) path when compiling the source of the LV.

    I think you should file a bug report using the pages of http://ni.com/support .

    In this way we will have better tools in the future.

    BR,

    / Roger

  • Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop

    Compiler error. Report to Technical Support OR: err c = 0xF1 ufppushop

    When recording / runing a vi that performs calculations in a node formula containing several if and a switch statement. (LV6.1, WinNT)

    I solved the problem: the compile error occurred because a single formula node entry was an enum.
    When you insert a cast to digital, the problem has been resolved.

  • Outside regs, reg 1239 compiler error

    I installed LV2009 and trying to open the version 8.6 vi.

    I get a message "compilation error. Report this problrm to Technical Support from National Instruments. off-regs - no release candidate has found, reg 1239! »

    32-bit client of Labview on Win 7 64 bit and Win Server 2008 64 bit give the same error.

    The attached code.

    Technical support NOR suggested installation LV 2009 service pack 1, which fixed the problem.

Maybe you are looking for

  • His cracking on Satellite L550-1See

    I would like to know the sound in my laptop (L550-1See). When I opened a music, a video file, or something like that which uses the sound in the game, there are voices craked if it was played in maximum or rather high volume, especially in the upper

  • How to exit verification mode

    I need to reisntall the original software, after that I have format the laptop, when inserted the CD, the answer says I must leave the verification mode, needs your help to overcome this problem. Brgds/TKS/Noman

  • Zoo Tycoon 2 does not work on Windows 7

    Ive just installed Windows 7 32 bit on my laptop of son. Zoo Tycoon 2, the collection of zookeepers installs OK but does not work. If I insert disc, the screen comes back, but when I hit play nothing happens and zoo tycoon disappears from the Task Ma

  • HP dc 5100 mt: problem Audio driver for Hp compaq dc 5100 mt

    I INSTALLED WINDOWS 7 ULTIMATE 64 BIT ON MY DC 5100MT HP BUT AUDIO DRIVER DOES NOT WORK... AND ANY TYPE OF SOUND IS NOT PLAYED... PLEASE DO SOMETHING FOR ME... I WILL BE VERY THANK FUL TO HP UR TEAM... WITH BEST REGARDS SAFI

  • 8.1 Windows will work in XP mode

    I just got my Dell Inspiron's 3847.  It has win 7 pro installed (reason why I bought it) and a victory for the pro 8.1 recovery disk.  Apparently, win 7 pro will run in mode xp easily, I found the info indicating that he has a real copy of xp built-i