FPGA: first compilation fails

Similar Questions

• FPGA Xilinx compilation failed. Access to the path 'C:\NIFPGA\corecache\activity.log' is denied.

  I just has my cRIO.  I installed all necessary software and drivers and have written a VI mode FPGA.  However, when I try to compile the code, I get the error of follow-up message (see attachment).  I contacted the support NEITHER and they have been unable to solve this problem at the moment.

  The engineer NOR gave me the following advice:

  ' 1. start the registry editor by selecting Start ' Run and then entering the window run regedit.
  2. press the Enter key to open the editor.
  3. find the following registry key in the path below:
  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  * the Wow6432Node is not correct in all cases. on my PC, you go to HKEY_LOCAL_MACHINE\SOFTWARE. National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  4. on the data tab, you should see the path associated with your CompilerPath_Xilinx12_4. Please confirm that it is linked to the C:\NIFGPA\programs\Xilinx12_4
  If you Xilinx 11.5 installed, make sure it is also bound to the correct path.
  5. If you have previous versions of LabVIEW installed, you will need to go to these versions as well. For example if you have LabVIEW 2010 is installed, please, go to 10.0\AddOns\FPGA
  Make sure that the CompilerPath_Xilinx12_4 or the CompilerPath_Xilinx11_5 or the CompilerPath_Xilinx10_1 are all properly placed under the drive C as seen above in step 4.
  (6) make sure that the "Working Directory" under LabVIEW 11.0 has the right path of C:\NIFPGA\
  (7) after that, close the registry editor and navigate to where is the worker to compile the FPGA. By default, it should be here: C:\Program Files (x 86) \National Instruments\FPGA\CompileWorker
  (8) here open the document "WorkerRootDirectory.txt" and change the path. Make sure that it is pointing to the C drive.
  (9) save and close the file. Restart your computer.

  It was already correct and still impossible to compile.

  Usually, a "access to the path... denied." error comes from the permissions of the user.

  What operating system do you use?

  You use this tool from an administrator account?

  Is there a security policy on your computer which determines the permissions and user rights?

  Is it possible to run LabVIEW as an administrator?  (e.g. under Windows 7, you right-click on LabVIEW.exe and choose 'Run as administrator'.)

  Best regards

• FPGA Compilation fails because of the mistake of Xilinx

  My FPGA compiles and I cannot understand why. There is nothing crazy in my FPGA VI of really, it seems strange to have this type of problem. I can't reach the code because its owner, but it's pretty simple because it reads all channels from a single module and records them in a data FIFO. I have compiled successfully any FPGA code on this computer, so I should definitely have everything needed to compile.

  My system consists of one NOR cRIO 9030 with a single module 9220. Below is the Compilation of summaries.

  ---

  LabVIEW FPGA: Compilation failed due to an error of Xilinx.

  Details:
  ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:295]
  ERROR: [Synth 8-1031] knidmahighspeedsinksize is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:296]
  ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:301]
  ERROR: [Synth 8-1031] knidmahighspeedsinkbase is not declared [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:302]
  INFO: [Synth 8-2810] pkgshimswitchedlinkdmaportifc unit ignored due to previous errors [/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/PkgShimSwitchedLinkDmaPortIfc.vhd:68]
  ---------------------------------------------------------------------------------
  Development of finished RTL: time (s): UC = 00:00:07. delay = 00:00:31. Memory (MB): peak = 798.605; gain = 204.203
  ---------------------------------------------------------------------------------
  ERROR: [Common 17-39] 'source' is not due to previous errors.
  INFO: [Common 17-83] release license: synthesis
  3 info, 0 Warnings, 0 critical warnings and 4 errors.
  synth_design failed
  : ERROR: [Common 17-39] 'source' is not due to previous errors.

  When running
  «source - notrace.» /. Xil/Vivado-6035-ip-10-60-203-176/realtime/toplevel_gen.tcl ".
  called inside
  «synth_design-top "toplevel_gen" - part "xc7k70tfbg676-1"-"full" flatten_hierarchy "»»
  (file "/ opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/synthesize.tcl" line 21)
  called inside
  "source" / opt/apps/NIFPGA/jobs/mC683d5_WCf98Qm/synthesize.tcl "" "
  exit #.
  INFO: [Common 17-206] exit Vivado at Tue Mar 24 23:58:54 2015...

  Compile time
  ---------------------------
  Introduction date: 24/03/2015-16:46
  Date recovered results: 24/03/2015-17:00
  Waiting time in the queue: 00:24
  Compilation of time: 13:22
  -Generate a Xilinx IP: 00:00
  -Summarize - Vivado: 01:27

  Compilation has restarted on
  24/03/2015-16:57

  ---

  Any help would be much appreciated!

  Thank you

  James.Morris wrote:

  Okay, so it seems that I get the error with a project from scratch and an FPGA with a single command and an indicator.

  I download the latest FPGA 2014 SP1 installation and I hope that will solve my problem.

  Well I'll mend, which fixed the problem! Somewhere along the line, my install FPGA must be corrupted.

  Thanks for the help, guys.

• LabVIEW FPGA: Compilation failed due to an error of xilinx

  I'm getting a 'Compilation failed due to the error of Xilinx' you try to compile the code in LabVIEW 2013.The code has successfully compilated in labview2012. Any suggestions on what is causing this problem?

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" line 29: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaSetOutputDataEnable.vhd", line 37. cparametersignal is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" line 21: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd ignored errors
  -->

  Total memory use is 204688 kilobytes

  Number of errors: 2 (filtered 0)
  Number of warnings: 4 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  Compile time
  ---------------------------
  Introduction date: 2014/2/26 18:15
  Date recovered results: 2014/2/26 18:17
  Waiting time in the queue: 00:06
  Compilation of time: 02:02
  -PlanAhead: 01:16
  -Generator kernel: 00:00
  -Synthesis - Xst: 00:35

  Hi guys

  I think I can give you a helping hand on this.

  I have the same problem when I'm working on the Tutorial (2013) exercise 2 with Rio evaluation Kit.

  You can try one of the following option.

  Solution 1.

  1. in the VI package manager.

  Select 'Tools '->' Options'-> "General '->' package Installation"-> Unchecked 'mass Compile screws after Installation of the package.

  Solution 2

  1. in the VI package manager, uninstall the driver LCD

  2. unchecked "Mass compile screws after Installation of the package" (see Solution 1)

  3 reinstall the driver of the LCD screen.

  Mine did after Solution 2 and the compiler works.

  Hope it will be useful for you guys.

  Thank you

• LabVIEW FPGA, 2015 compilation error

  I've recently switched to LabVIEW 2015 and I'm working on OR myRIO. So also installed myRIO 2015 bundled software. The problem I have is that the compilation of fpga fails within 10 seconds.

  

  and the target Xilinx journal report is empty

  

  The first time when I tried to compile on 2015 version, it failed and the message box that failed came alongwith the avast antivirus warning for malicious activity. I reported it as wrong and now I tried several times with avast shield disabled control, but the results are the same. While the version of labVIEW 2014 works very well.

  Now, I'm sure that there is something wrong with the installation of Vivado because this dll is part of it. The dll must be default in the2014_4\lib\win32.o directory C:\NIFPGA\programs\Vivado if you are using an operating system for 32-bit AND also in C:\NIFPGA\programs\Vivado2014_4\lib\win64.o If you use a 64-bit operating system. If the dll is not here, it is probably that the anti virus (I've never seen what happens to Xilinx but I have for other stuff).

  I'm emphasizing the 2014_4 because LabVIEW 2015 uses Vivado 2014_4 while 2014 LabVIEW uses Vivado 2013_4. Since you have also installed LabVIEW 2014, you must have 2013_4 as well and if it works, you will find the dll I just wanted you make sure you check the correct directory for the Vivado 2014_4.

  Download and install (reinstall or repair if already installed) 2015 LabVIEW FPGA Module Xilinx tools Vivado 2014.4. You can also use the DVD Setup if you have. It would be a good idea to do the installation with the disabled and even anti-virus try the first compilation the same. Try and let me know if the problem persists.

  Kind regards

• Compilation failed due to an error of Xilinx.

  I've recently updated since LV2014 until 2015, and an FPGA VI who previously compiled successfully is no longer made. My goal is a 7951R and I use a module e/s of 6584. A few minutes in the compilation process, I get the below error. I found the White Book of OR describing this problem for 2010 and provide a patch, but this solution has failed for me. Curiously, I can succeed in the compilation of FPGAS screws very simple, but not more complex that were previously viable.

  LabVIEW FPGA: Compilation failed due to an error of Xilinx.

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd" line 55: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\arrayLpIndx_593.vhd", line 22. array_in is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd", line 24: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd ignored errors
  -->

  Total memory use is 239156 kilobytes

  Number of errors: 2 (filtered 0)
  Number of warnings: 11 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  Compile time
  ---------------------------
  Introduction date: 04/12/2015-16:36
  Date recovered results: 04/12/2015-16:38
  Waiting time in the queue: 00:09
  Compilation of time: 01:44
  -Generate a Xilinx IP: 00:00
  -Estimate of the resources - PlanAhead: 00:33
  -Summarize - XST: 00:56

  Okay, that was weird.

  I discovered there was a small change between revisions. I had wrong initalized a table by exchanging the entries, so that the size of the array is 0 instead of n. normally, this should be taken at the beginning of the compilation, but this table null was used to initialize a shift register in a while loop and the exit from the while loop enters a loop, where my FIFOs operate. While the loop/shift register seems to be the essential element to the compilation of progress as he did and present it as a mistake of Xilinx. If you delete the while loop then the error is detected quickly and correctly identified.

• After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  What can I do?

  Have you tried what he says in the link I provided?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Problem with the compilation by using the new compiler (Compilation failed during execution: compilation-abc)

  Hello

  Since the release of the fast compiler, I experienced problems with the compilation of the version release with it.

  As it was still in beta, and since it was still possible to use the legacy compiler, I chose to use the legacy compiler each time (especially since it was more stable).

  With this 64-bit iOS requirement came into play on February 1, the legacy compiler is no longer available because it has been completely removed from AIR 16 (and all future versions).

  Now, I can no longer compile release versions (debug versions are works well) because I have the following error every time:

  Error occurred during the application of packaging:

  Stack dump:

  0 program arguments: C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/bin/compile-abc / compile - abc.exe - mtriple = armv7-apple-ios - filetype = obj - sdk C:\Program Files\Adobe\Adobe Flash Builder 4.7 (Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/lib/avmglue.abc 64-fields C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/lib/air-fields.)) arm-air.txt-O3-ane-symbol = MmgCmApiExtInitializer - ane-symbol = MmgCmApiExtFinalizer - ane-symbol = MmgRbApiExtInitializer - ane-symbol = MmgRbApiExtFinalizer - ane-symbol = MmgStoreKitApiExtInitializer-ane symbol = MmgStoreKitApiExtFinalizer-ane symbol = MmgGoViralApiExtInitializer-ane symbol = MmgGoViralApiExtFinalizer-ane symbol = MmgGaApiExtInitializer - ane-symbol = MmgGaApiExtFinalizer - ane-symbol = MmgGAIDFAAccessApiExtInitializer - ane-symbol = MmgGAIDFAAccessApiExtFinalizer - ane-symbol = AFExtensionInitializer - ane-symbol = PushwooshExtInitializer - ane-symbol = PushwooshExtFinalizer elease-temp\AOT\AOTBuildOutput4982262150932522887.tmp\ABCFilesList.txt-abc-file-list=C:\BingoIslandWeb\Client-branch-1.06.05\BingoIslanMobile\BingoIsland\bin-r

  Compilation failed during execution: compilation-abc

  
  

  I tried to pin-point the source of the problem leaving specific things in the code, while removing all the rest,

  But so far, all I could find is that he has a problem with the classes that extend EventDispatcher.

  Anyone encounter this problem and knows how to work around it?

  Thank you!

  
  

  
  

  I had this problem also with other things. It was difficult to solve. Remove all const and var conversion in the Document class solve my problems

• 970 GTX unsupported? After effects error: drawn in the 3D Department: Initial shader compilation failed (5070: 2)

  I am disappointed that my MSI GTX 970 is not supported for 3D ray-traced in Adobe after effects CC 2014.
  My configuration:
  Intel Core i7 4790 k 4.4 GHz
  8 GB DDR3 1333 MHz RAM (fix 16 GB soon)

  MSI GTX 970 games 4G

  Windows 8.1 Pro x 64

  Card GPU:

  Fast draft:	Available
  Texture memory:	1562 MB
  Ray-tracing:	CENTRAL PROCESSING UNIT

  (Not available - GPU CUDA driver or incompatible device)

  OpenGL

  Seller:	NVIDIA Corporation
  Feature:	GeForce GTX PCIe/970/SSE2
  Version:	2.1.2 NVIDIA 344.75
  Total memory:	3.81 GB
  Shader Model:	4.0 or later

  CUDA

  Driver version:	-
  Features:	-
  Current usable memory:	-
  Maximum usable memory:	-

  I don't have the option "Enable CPU untested, not taken in charge for acceleration or traced to the 3D renderer Ray CUDA" but when I have him allow, I get an error saying:
  "After effects error: drawn in the 3D Department: Initial shader compilation failed." (5070:: 2) ".

  then

  "After Effects Error: drawn in the 3D Department: unable to create the context for Raytracer (5070: 2)" "

  then another

  "After Effects Error: drawn in the 3D Department: paged memory mapped to a Raytracer." Your project may exceed the limits of the GPU. Close other applications. Try to update the CUDA driver. (5070:: 2) '

  
  

  I have the latest Nvidia driver. Anyway to fix this? Or I have to wait for Adobe support my GPU?
  

  I'd suggest ditching forced the C4D and ray traced rendering engine instead of use: Details of CINEMA 4 d with After Effects integration

  I mean, it's more powerful and it's free!

  If you absolutely need to use ray-traced rendering engine, what are you trying to use it on? Try it with only a layer of simple form you need to do 3d just to eliminate the problems of others, possibly complications, a project. What CC 2014 version are you running? 13.1? 13.2?

  Don't forget, Adobe is never going to add to the list supported for rendering engine raytraced as they develop is more this feature.

• Compilation failed during execution: dsymutil

  Hello

  You try to compile a standard package for ios with major failure. The fast version works perfectly without any error.

  I am on mac os x lion and using flash builder 4.5.1. The error I get is:

  Error occurred during the application of packaging:

  /var/folders/N4/52v6ttx96c7bnw8vnysh5j780000gn/T/cmd460615453403880056.tmp: line 2: dsymutil: command not found
  Compilation failed during execution: dsymutil

  I can not find something posted previously or any where in fact.

  / Daniel

  I am answering my own question here.

  Install Xcode from the appstore (it's free) and you'll get dsymutil. Weird workaround plans can I run this installer on another computer that had no installed XCode (but still has dsymutil).  But at least it solved the problem.

• [Solved] [Ubuntu] Player Modules compilation fails during the first round

  Environment:

  Ubuntu Server 15.04

  VMware-Player - 7.1.0 - 2496824.x86_64.bundle

  
  

  Hello

  The update of the kernel module fails to build vmnet:

  2015 05-08 T 11: 55:17.757 + 02:00 | vthread-4 | I120: Extract successfully the vmnet source.

  2015 05-08 T 11: 55:17.757 + 02:00 | vthread-4 | I120: Module construction with the command ' / usr/bin/make - j8 - C/tmp/modconfig-Hx4jdX/vmnet-only-automatic generation HEADER_DIR=/lib/modules/3.19.0-16-generic/build/include CC = / usr/bin/gcc IS_GCC_3 = no ".

  2015 05-08 T 11: 55:18.894 + 02:00 | vthread-4 | W110: Vmnet failed.  Cannot run the command build.

  
  

  No more description of the error is available in the newspaper which is attached below.

  
  

  Any suggestion?
  

  Reader 7.10 and Workstation 11.10 are incompatible with the kernel linux 3.19.

  The solution is documented here.

  Successfully, I applied the patch on /usr/lib/vmware/modules/source/vmnet.tar on Ubuntu Server 15.04.

• Firefox anchor link works the first time, fails the second time

  My site uses anchor of the form href = #1234 file.htm links to access < a name = 1234 > in file.htm.

  It works fine when the site is loaded locally on my PC at home. When I download on my site platform it works the first time I use, then fails by jumping to the top of file.htm. IE works fine on the platform of the site as well as on my PC at home.

  Hello

  I'm glad to hear that your problem has been resolved.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• El Capitan utility disk first aid fails - unable to unmount the volume for repair

  Question: Given the following error with Disk Utility first aid and success with diskutil check volume, I should consider my drive damaged or volume?

  After a crash of the system on my Mac mini (end 2012) running that OS X El Capitan 10.11.3 has experienced a kernel panic induced by the adapter USB Wi - Fi, I dutifully ran first aid utility disk on each volume on the disk, in order to ensure the integrity of system files.

  What I feel with disk utility (GUI) first aid:

  First aid process has failed. If it is possible to backup the data on this volume.  Click OK to continue.

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Updated support for the volume partition that

  Impossible to disassemble for repair volume

  Operation failed...

  (underlining)

  Additional information: I didn't have any problems with this disk volume. I use it only as a Time Machine backup destination. It is an encrypted volume OS X Extended (respect for case-sensitive). My concern involves only disk utility complaint that its "first aid process has failed."

  After reading the complaints in other forums that utility disk on El Capitan has been "dumbed down" and can not perform many of the functions that the utility of the same name used to be able to perform in previous versions of Mac OS (complaints, I can't confirm because I'm relatively new to MacOS - although extremely in computing with Windows, UNIX and Linux) (, so I didn't get to use disk utility a lot, before El Capitan), I decided to do the same "check the volume" that I knew first aid was trying to perform with the diskutil command-line app.  Guess what? No error!:

  What I have experienced with command-line diskutil:

  sudo diskutil verifyvolume disk9

  Audit file system began on disk9 6TBMacOS_1_Archive

  Check the storage system

  Volume control

  disk4s2: search Volume headers

  disk4s2: search for disc labels

  12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

  disk4s2: search the Volume metadata

  Logical volume group has a Volume of metadata 24 MB with double redundancy

  Start the analysis of the metadata for a valid checkpoint

  Load and check the Segment headers

  Load and check the payload control point

  Load and check the Transaction Segment

  Incorporate 0 most recent checkpoint operations of no

  Load and check the virtual address Table

  Load and check the use Table Segment

  Load and check the Metadata Superblock

  Load and check the volume logic B-trees

  Logical Volume group contains 1 Logical Volume

  Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

  Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

  Load and check the summary of Freespace

  Load and check the accounting of block

  Load and check out virtual addresses live

  New control point of transaction commit is valid

  Load and check the Segment cleaning

  The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

  Checking storage system exit code is 0

  Check the file system

  Using the live mode

  Perform direct verification

  Logged more HFS volume control

  Detected a case-sensitive volume

  Checking extents overflow file

  Check the extended attribute file

  Checking volume bitmap

  The 6TBMacOS_1_Archive volume seems to be OK

  File system check exit code is 0

  Finished on disk9 6TBMacOS_1_Archive file system check

  I will finish success of diskutil verifyvolume that my disk volume is not serious and that Disk Utility first aid simply does not correctly?

  Thank you!

  -IlDavo-

  I think you might be able to do a repair of first aid, after you have disassembled the drive first:

  1. Run OS X by an external device (ex: USB mode, or external hard drive or disk target from another Mac)
  2. Launch the Terminal and run the following command umount f /Volumes/ (ex: umount f/Volumes/Macintosh\ HD)
  3. Then run disk utility first aid.

  I had this problem on a Macbook Air, I tried to recreate the image to work, so I didn't need to get anything off the drive. I tried to format the drive and reinstall OS X. So I don't know if first aid work after disassembly, but it worked without a doubt after that I did the first two steps above and then deleted from the disk. Not sure if this will help, but worth a try, I guess.

• The first Installation fails after first Boot of the Satellite L750

  Hello.

  I turned on my brand-new Satellite L750 - 04K 010 for the first time tonight (bought new) and start going through the initial setup process for Windows 7 Home Premium. The installation must "Installing devices" and then hung up without activity for about 2 hours, how I decided to restart.

  Then I kept getting the error windows installation has failed and would then need to restart the installation process. The computer will restart but kept coming up with the same error and the loop would continue even once.

  I have not received the installation discs.

  I tried to press F8 to see if the computer repair would work but only gave options to repair the system to a previous state. No Toshiba option was available.

  Help!

  Thanking you in advance,

  Greg

  It's pretty stupid situation now.
  If there is no way to launch the installation of recovery once again I recommend your dealer and ask for help. With other words, ask for the replacement of the laptop.

  What you can also do is to contact the nearest Toshiba service provider and explain the situation. I put t know what they can do for you, but I imagine that you will get a DVD of recovery for the installation of the OS.

  Of course I n don't know what the right solution, but I don't see another option for you.

• Can not start up and the utility disk first aid failed

  I have an iMac 27 "retina 5K (end of 2015) El Capitan (10.11.2) and 10 Windows via Bootcamp.   This morning when I had finished work on the Windows of the machine side, I tried to start in El Capitan, but it failed silently and turned off the machine itself about the 2 minute point.  I tried new and same problem.  So I checked if I could go back to Windows and ran 10 Windows without problem.  Then I started in the Mac recovery partition to run disk utility and it revealed a considerable number of errors on the Macintosh partition such as:

  -Previous ID in a string of hard link is incorrect (ID =-1130612101)

  (it should be 3164355194 instead of 0)

  Several of the above errors appeared with different numbers

  -Volume bitmap minor meds of repair for orphans blocks

  -County of block free invalid volume

  -Volume header needs minor repairs

  -Lack of notice of thread (id =-1130634630)

  Several of the above errors appeared with different numbers

  Finally the process 'done' with the 'first aid process has failed.  If possible to backup the data on this volume.

  Then I started in an installed USB version of the El Capitan, and while it was successful, he launched a warning when he mounted the volume that I had the problem with: "OS X cannot repair the disk"Macintosh HD"" but I was able to copy the files from this volume and even run applications that have been stored on it.  Tried to run disk utility and first aid in vain as above.

  So here are the questions.

  1 should I guess that nothing can do otherwise erase that partition and reinstall El Capitan?

  2 delete the partition and reinstalled El Capitan will affect my Bootcamp partition or the ability to use Win 10?

  3. I have a Time Machine backup. restore it re - will present the same problem?

  4. I have never had such a massive and unrecoverable failure on a Mac drive and I had used it the day before without problem.  Should I assume that the drive itself is defective and have it replaced?  I ran an Apple Hardware Test and were not problems.

  1 fix

  2. Yes

  3 NO.

  4 NO.

  Back up all data on this disc, including your Bootcamp partition.