FPGA issues with myRIO

Similar Questions

• Generation of PWM in FPGA pulses with nano seconds

  Hi guys,.

  I work with myRIO FPGA.

  I have seen a few examples to generate PWM pulses in the FPGA target with the help of timed structures. Timed structures can contain the frame in the sequence structure flat with time control less than 1 micro second (1 MHz).

  But I want to generate impulses PWM digital pins in hundreds of nano seconds.

  I saw datasheet of myRIO - 1900. It can generate a frequency up to 40 MHz.

  I need the pulses on the order of 10 MHz.

  Can someone help me how to generate pulses on the order of 10 MHz PWM?

  Hi fires,

  the FPGA can use "ticks" aka clock pulses for delays.

  As your impulses are of the order of 4 ticks, you could use simple statements waiting!

• Huawei P9 - I have many issues with getting my pictures from the phone to my Imac

  Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.

  Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac.  When I connect via a USB cable, it refuses my permissions.

  I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!

  I'm pulling my hair out and I have enough to do with! Help, please...

  Jim Hosking

  You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it

  You may need special third party software for your phone load in Photos or iPhoto

  LN

• iPod Touch 5 Gen - iOS 9.3.1 lightning connector issues - with accessories

  Has anyone seen a problem using iOS 9.3.1 on an iPod Touch 5th generation with lightning connector devices?  Specifically, I use the iPod in a cradle of scanner which connects via the connector of the lightning, until iOS 9.3.1 the cradle was visible to the application, but once it has been updated the scanner loses communication to the iOS device and application.  IPod charge and connect to iTunes, no problem, but refuses to see the cradle, I have another iPod on an older version of iOS, which connects to the cradle even without problem.

  To try to find, I've updated the iOS to 9.3.2 beta fault from the site of the developer, this problem has now fixed the issue with the cradle.  I can't that assume Apple broke the connection in iOS 9.3.1?

  Sometimes an iOS update breaks compatibility with accessories. Since then, he has worked with next beta which seems to be the cause.

  All yo can do is to continue using the beta until the version is rejected in the pubis.

  Have reported the problem to Apple to ensure that the beta version is not yet revised to cause the same problem?

  https://www.Apple.com/feedback/iPodTouch.html

• frequency corresponding problem with myrio!

  Currently, I am working with myRIO and Labview 2013 to generate sinusoidal PWM signals.
  When I created 'analogue output' tab myRio and connected to the Oscilloscope, oscilloscope waveform could not show me the appropriate frequency combined with a frequency that I gave in labiew. Is there a relationship between the frequency of "the"(myRio tap) of analog input between real-time rate? ". Otherwise, is it certainly possible to calibrate the frequency in labview? Please help me!

  
  

• Pavilion g6: Atheros connection issues with Arris Modem

  Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.

  @s_z,

  Hello and thanks for posting back.  Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.

  Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc...)

  Please let me know how things are going.  Thanks again for posting and have a great day.

• issue with tables and clusters

  Hello

  Another issue with the tables and clusters. I have three engines thatI move on XYZ and then measure something. I need to draw on the 3D, the result of the measurement. How to draw real XYZ and not the index of the data table positions? (I can't actully how to build the matrices 2D forX, Y and Z). In the figures, I give an example of what I need.

  Concerning

  You have to break the data out of the cluster and to present them to the graph 3d to a separate bays for X, Y, Z and W where 'W' is your values measured at the locations described by X, Y, Z.

  This thread shows how trace readings in space 3. The following image shows the data that the original author wanted to draw.

  

  Have fun

  Ben

• problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

  problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

  See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

• Docking station issues with power - power of the outdated USB hub

  We get an outdated 'USB hub power' error on my docking station with an E7440 anchored in it.  Worked fine, since I have received the device, but all of a sudden it-error when I try to access any flash drive.  Swapped out with a new one, number the same dock.  Also swapped power adapter, also with no effect.  Any ideas on the problem or resolution?

  Did you by chance install or upgrade of Citrix Receiver recently?  I did and my USB ports no longer works in the docking station.  This link has Details of why:

  blog.wisefaq.com/.../USB-Power-issues-with-Citrix-Receiver

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• What are the known issues with Bravia HX-925

  Hello

  Please let me know the known issues with the HX - 925 Bravia Full HD 3D TV series.

  Thank you and best regards,

  Arun

  Hi ArunHX925!

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• Are there still known issues with Lightoom 5 and El Capitan with respect to attachment? I know that problems have been resolved with CC Lightoom

  Are there still known issues with Lightoom 5 and El capitan with respect to attachment? I know that problems have been resolved with Lightoom CC.  I looked on the Internet but most of the references are Lightoom CC.  Ive got all the updates with Lightoom 5, (Camera RAW 8.1), but also Apple, (El Capitan 10.11.3), but my Nikon D800 will not always tie.

  HAL P Anderson wrote:

  The problem is in the SDK (SDK) of Nikon. He used features of OS that changed with El Cap. All previous versions of LR were broken by the Exchange operating system. For LR 5 to work, it must be associated with the new SDK of Nikon, and Adobe is not reissue of older versions.

  The result is: LR5 and previous versions will continue to not be able to attach Nikon under El Capitan. I'm sorry.

  HAL

  Although what you say is maybe true, I'm not sure, but there were reports of people that says exactly the opposite. Home of Nikon has not worked in 2015/6 but continued to work in LR 5 on the same Mac running 10.11.x.

• APEX dynamic Action issue with custom button template

  A new day and a new problem. -.-

  I wanted to create a dynamic action, if a button is clicked and got the error "the selected button uses a 'button model' which does not contain the #BUTTON_ID substitution string #. So I googled a bit und found issue with action Dynamics apex. I thought that this would solve my problem and I looked in the model button to find this:

  <table class="t15Button" cellspacing="0" cellpadding="0" border="0"  summary=""><tr>
  <td class="t15L"><img src="#IMAGE_PREFIX#themes/theme_15/button-l.gif" alt="" /></td>
  <td class="t15C"><a href="#LINK#">#LABEL#</a></td>
  <td class="t15R"><img src="#IMAGE_PREFIX#themes/theme_15/button-r.gif" alt="" /></td>
  </tr></table>
  

  A former colleague created the model itself and I do not know where to insert the #BUTTON_ID #. Does anyone have any suggestions?

  Concerning

  Chris

  Miss you atrribute button ID,

  is the correct code

  
  
  #LABEL#
  
  
  

  I hope this works.

  Go

• English CC only version: compatibility issues with Windows 7 in Italian?

  Hello. When I try to buy the creative cloud all-apps included (taking advantage of the special offer), I wonder if I want the version of all languages or English only. Given that the latter is cheaper and I use Adobe software in English in any case, I would ask: would there be compatibility issues with my Windows 7 system, which is in Italian? Is there one difference other than the language? Thank you

  Francesco

  Resolved:

  I spoke with customer assistance, there is no problem of compatibility with the language of the operating system.

  Thank you, bye